W1210F500-RB-10

W1210F500-RB-10 SUPERWORLD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

(a) (c) (b) (e) (d) 1. PART NO. EXPRESSION : (b) Dimension code (c) Material code (a) Series code 2. CONFIGURATION & DIMENSIONS : 4. MATERIALS : SUPERWORLD ELECTRONICS (S) PTE LTD 3. SCHEMATIC : (e) R : Tape & Reel (f) Rated Current : B = 200mA WIREWOUND TYPE COMMON MODE FILTER PG. 1 NOTE : Specifications subject to change without notice. Please check our website for latest information. 20.05.2014 d a Unit:m/m 0.03 Min. b 0.35 ± 0.1 B C D1 D2 E c A C B E D2D2 D1 D1 1.20 ± 0.2 A PCB Pattern H L (f) (d) Impedance code : 900 = 90Ω (g) 10: Standard (g) W 1 2 1 0 F 9 0 0 - R B - □ □ 0.65 Ref. 0.30 Ref. 1.10 Ref. H 1.55 Ref. L 11 ~ 99 : Internal control number W1210 SERIES Side View Top View (a) Core (c ) Terminal (d ) Core (b) Wire

SUPERWORLD ELECTRONICS (S) PTE LTD 6. ELECTRICAL CHARACTERISTICS : NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 2 20.05.2014 WIREWOUND TYPE COMMON MODE FILTER W1210F500-RB-10 50± 25% 100 0.30 50 250 125 10M Part No. Test (MHz) Frequency(Ω) Impedance Rated Voltage (Vdc)(mA)Max. DCR (Ω) Current Rated Min.(Vdc) Withstand Voltage IR (Ω) 100W1210F900-RB-10 90± 25% 50 0.40 200 125 10M W1210F670-RB-10 67± 25% 100 0.30 50 250 125 10M W1210 SERIES b) Storage condition (component in its packaging) a) Operating temp. : -40° C to 125° C 5. GENERAL SPECIFICATION : i) Temperature : -10 to 40° C ii) Humidity : 60%

SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 3 20.05.2014 7. CHARACTERISTIC CURVES : WIREWOUND TYPE COMMON MODE FILTER 1 10 100 1000 10000 FREQUENCY(MHz) 0.1 100 1000IMPEDANCE(Ohm) W1210F500-RB-10 Common Mode Normal Mode 1 10 100 1000 10000 0.1 100 1000 W1210F670-RB-10 Common Mode Normal Mode 1 10 100 1000 10000 0.1 100 1000 W1210F900-RB-10 Common Mode Normal Mode FREQUENCY(MHz) IMPEDANCE(Ohm) FREQUENCY(MHz) IMPEDANCE(Ohm) W1210 SERIES

SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 4 20.05.2014 WIREWOUND TYPE COMMON MODE FILTER W1210F500-RB-10 7-1. Insertion Loss Test W1210 SERIES

SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 5 20.05.2014 WIREWOUND TYPE COMMON MODE FILTER W1210F670-RB-10 W1210 SERIES

SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 6 20.05.2014 WIREWOUND TYPE COMMON MODE FILTER W1210F900-RB-10 W1210 SERIES

D1:1± 0.1 F:3.5± 0.05 P2:2± 0.05 P E:1.75± 0.1 Po:4± 0.1 Si ze W:8.0± 0.1 Bo Ko Section A- A AoA t A D:1.5+0.1 Seri e s 1210 Ko(mm) 1.05± 0.10 Bo(mm) 1.50± 0.10 Ao(mm) 1.25± 0.10 P(mm) 4.0± 0.1 t(mm) 0.22± 0.05 D(mm) 178.0± 2.0 9-2 Tape Dimension / 8mm 7" x 8mm D C B R0.5R1.9 120° 7" x 12mm 2± 0.5 60.0± 2.0 R10.5 13.5± 0.5 Type A(mm) C(mm) B( mm) 9-1. Reel Dimension 9. PACKAGING INFORMATION : A W1210 9-3. Packing Quantity Carton Middle Box Chip / Reel Seri e s Inner Box 150000 75000 3000 15000 W1210 NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 8 20.05.2014 WIREWOUND TYPE COMMON MODE FILTER W1210 SERIES

SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 9 20.05.2014 WIREWOUND TYPE COMMON MODE FILTER 9-4. Tearing Off Force Base tape Top cover tape 165° to 180° F Tearing Speed in the arrow direction under the following conditions. The force for tearing off cover tape is 15 to 80 grams 45~855~35 860~1060 Room Humidity (° C) Room Temp. (%) (hPa) Room atm 300 (mm/min) W1210 SERIES a) Recommended products should be used within 12 months from the time of delivery. b) The packaging material should be kept where no chlorine or sulfur exists in the air. b) The use of tweezers or vacuum pick up is strongly recommended for individual components. c) Bulk handling should ensure that abrasion and mechanical shock are minimized. a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils. To maintain the solderabililty of terminal electrodes : 1. Storage Conditions : Application Notice 2. Transportation :