VCFP96M ATC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

FEATURES

INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS

  • 3Ø True RMS (Voltage, Current)
  • 3Ø Power (Active, Reactive, Apparent), Energy (Active, Reactive, Apparent)
  • Programmable CT/PT Primary/Secondary
  • CT Polarity Error Detection
  • Variable Pulse width Selection
  • Single Phase Network with Phase Selection
  • Modbus RTU Communication (RS485)
  • Neutral Current Measurement
  • THD up to 31st Level.
  • Single Pulse Output / Demand Phase Sequence Detection Display 4 rows, LCD with backlight Digits 4 (Lowest 8 digits for energy display) Bar graph For Current representation Electrical Connection 3Ø - 3 wire, 3Ø - 4 wire, 2Ø - 3 wire, 1Ø - 2 wire Input Voltage Range 11 to 300V AC, (Phase to Neutral) 19 to 519V AC (Phase to Phase) Input Current Range Nominal 5A AC (Min-11mA, Max-6A) Frequency 45 to 65Hz Display Scrolling Automatic / Manual (Programmable) Power Consumption 8VA Max Display Reset Programmable (For energy) Resolution For energy : (depending upon CT ratio x PT ratio) For Power, Voltage, Current : Auto resolution For Power factor : 0.001 Accuracy Voltage (L-N / L-L) : ±0.5% of F .S. Power Factor ±0.01 Current ±0.5% F .S. Frequency : ±0.1% For L-N Voltage >20V For L-L Voltage >35V Power (Active, Reactive, Apparent) : 1% Energy (Active, Reactive, Apparent) : Class 1 Memory Retention 10 years (For energy) Measuring Parameters Voltage (L-L / L-N) (Individual / Average), Current (I1, I2, I3) (Individual / Average), Frequency, Power Factor (Individual /Total), Active, Reactive & Apparent power (Individual / Total), Active, Reactive & Apparent Energy (Total), Demand (Min / Max Active Power, Min/Max Reactive Power, Max Apparent Power), %THD up to 31st Level Max Demand Current, Neutral Current, Phase Sequence Detection Pulse Output Voltage Range : External 24V DC max Current Capacity : 100mA max Pulse Width : 100 ms ± 5 ms Communication Interface and Protocol RS485 and MODBUS RTU Communication Address 1 to 255 Transmission Mode Half duplex Transmission Distance 500 meter maximum Transmission Speed 300, 600, 1200, 2400, 4800, 9600, 19200 (in bps) Parity None, Odd, Even Stop Bits 1 or 2 Response Time 100 ms (max and independent of baud rate) IND. CONT . EQ. 496Y

Diversified Electronics 800.727.5646 atcdiversified.com POWER QUALITY VCFP96M AUXILIARY SUPPLY SPECIFICATIONS SETTABLE PARAMETERS ENVIRONMENTAL SPECIFICATIONS MECHANICAL SPECIFICATIONS COMPLIANCE

ORDERING INFORMATION

DIMENSIONS TERMINAL CONNECTIONS CT Primary 1/5A to 10kA (Programmable for any value) CT Secondary 1/5A (Programmable) PT Primary 100V to 500kV (Programmable for any value) PT Secondary 100V to 500V (Programmable for any value) Temperature Operating Temperature : -10 to 55°C Storage Temperature : -20 to 75°C Humidity (non-condensing) Up to 85% RH Mounting Panel mount Weight 318 gms Supply Voltage 100 to 240V AC, -15% +12%, 50/60 Hz, (±5%) Part Number: VCFP96M 99 91.5 91.5 90.5 5 50 Side viewFront bezel Panel cutout NS2S1S2S1S2S1 V1 N L O A D V2 V3 I2 I3 LN PULSE O/P RS485 Cable Size (mm2): 0.5 to 2.5 ; Tightening Torque (N-m): 0.68 to 0.79 Applicable EMI / EMC Standards Product Standard : IEC 61326-1 Category Standards Compliance ESD Immunity IEC 61000-4-2 Level IV (Air discharge : 15kV), (Contact Discharge : -8kV Surge Immunity IEC 61000-4-5 +/- 2kV common mode, (Line to ground) +/- 1kV differential mode, (Line to Line) Radiated Susceptibility IEC 61000-4-3 Level III, 80 to 1000MHz (10V/m) Level II, 1.4GHz to 2GHz (3V/m) Level I, 2GHz to 2.7GHz (1V/m) Conducted Susceptibility IEC 61000-4-6 Level II (3V/m) Voltage Dips and Interruptions IEC 61000-4-11 Dips : 0% residual voltage / 1 cycle (Criteria B), 40% residual voltage / 10 cycles 50Hz / 12 cycles 60Hz (Criteria C) 70% residual voltage / 25 cycles 50Hz / 30 cycles 60Hz (Criteria C) Interruptions : 0% residual voltage / 250 cycles 50Hz / 300 cycles 60Hz (Criteria C) Conducted Emission CISPR-11 Radiated Emission CISPR-11 Electrical Fast Transient IEC 61000-4-4 Level III (2kV) Diversified Electronics 800.727.5646 atcdiversified.com