V9064B

V9064B KEYSIGHT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 23

Technical content

Solve today, evolve tomorrow Data Sheet

– Optimize multi-device testing with up to four TRX channels per EXM: each is a complete vector signal analyzer/vector signal generator (VSA/VSG) instrument – Easily test multi-format devices with standard-specific X-Series measurement

applications

– Maximize throughput with raw hardware speed and advanced sequencing – Increase first-pass yield with superior signal purity and measurement accuracy – Get up and running in hours, not days, with validated turnkey chipset solutions In wireless device manufacturing, meeting ever-tougher goals and tighter schedules is easier when you have access to the best resources. The Keysight Technologies, Inc. EXM wireless test set scales with your production needs and is in sync with the latest cellular and WLAN chipsets. Better yet, it delivers the speed, accuracy, and port density you need to ramp up rapidly and optimize full-volume manufacturing. The EXM is designed for multi-device testing with up to four TRXs: each is a complete vector signal analyzer (VSA), vector signal generator (VSG), and four-port RFIO. It can easily test multi-format cellular and WLAN devices including the latest technologies such as: – LTE-Advanced Carrier Aggregation (CA) – 802.11n/ac Multiple Input Multiple Output (MIMO) – LTE/LTE-Advanced FDD – LTE/LTE-Advanced TDD – TD-SCDMA – HSPA+, W-CDMA – 1xEV-DO, cdma2000 – GSM/EDGE/Evo – 802.11a /b/g/n/j/p/ac – PHS – DECT Introduction

V9080B LTE/LTE-Advanced FDD and V9082B LTE/LTE-Advanced TDD Table of Contents 03 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

1. Technology-specific software. Sold seperately. 2. Each TRX module has either two full duplex and two half duplex ports (E6640A-2FD) or four full duplex ports (E6640A-4FD), depending on your application requirements. A full-duplex port can act as an input and output simultaneously. For example, it can connect to both the VSA/ VSG of a single TRX at the same time. Full-duplex ports are designated as follows: RFIOx where x can be 1 or 2 for the E6640A-2FD option or output but not both simultaneously. The configuration of the half-duplex ports can be set via the front panel or remote programming. The half-duplex ports are designated as RFx I|O where x is either 3 or 4 (e.g. RF3 I|O). E6640A EXM PXI controller LAN (1000 base T) USB 2.0 USB 3.0 Display port Each TRX has a fully integrated VSA/VSG Two half duplex I/O ports2 Two full duplex I/O ports2 RefTRX1 TRX2 TRX4TRX3 Display port LAN (1000 base T) USB 3.0 USB 2.0 PXI controller TRX1 TRX2 TRX3 TRX4 Two full duplex I/O ports 2 Two half duplex or two full duplex I/O ports 2 Each TRX has a fully integrated VSA/VSG Ref 04 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

– LTE/LTE-Advanced FDD – LTE/LTE-Advanced TDD – HSPA+, W-CDMA – 1xEV-DO, cdma2000 – GSM/EDGE/EDGE Evo – TD-SCDMA Wireless connectivity – 802.11a /b/g/n/j/p/ac – WiMAX™ – Bluetooth 1.0 to 4.2 – GNSS: GPS, Galileo, GLONASS, Beidou, SBAS, QZSS – Digital video MIMO (2x2, 3x3, 4x4) and carrier aggregation – Switched MIMO for manufacturing test – True MIMO (multi-TRX) for design validation – LTE-A CA inter- and intra-band Application Flexibility – Consistent repeatabil - ity of standard-based X-Series measurement – One application license covers up to four TRX units per mainframe – SCPI-controlled PXIe OBT compatible with EXT/E6630A Each TRX module contains – A fully integrated VSA/VSG – Integrated RFIO with either two full duplex and two half duplex ports (E6640A-2FD) or four full duplex ports (E6640A-4FD) – Rugged N-type connectors designed for manufacturing environment Each TRX is upgradable – Add a new TRX (hardware) as needed – Upgrade frequency and bandwidth (license key) Each TRX is configurable – Frequency range – 380 MHz to 3.8 GHz or 6 GHz – Banded or WLAN, Bluetooth , GNSS – Bandwidth: 40/80/160 MHz Scale your production line with TRX modules 05 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

Definitions and conditions Specification Specifications describe the performance parameters covered by the product warranty and are valid from 20 to 35 °C unless otherwise noted. Typical Typical describes additional product performance information that is not covered by the product warranty. It is performance beyond specifications that 95 percent of the units exhibit with a 95 percent confidence level. This data, shown in italics, does not include measurement uncertainty, and is valid only at room temperature (approximately 25 °C) after alignment within the stated alignment time and temperature limits. Nominal Nominal values indicate expected performance, or describe product performance that is useful in the application of the product, but are not covered by the product warranty. The test set will meet its specification when: – The test set is within its calibration cycle – The test set has been stored at an ambient temperature within the allowed operat - ing range for at least two hours before being turned on; if it has previously been stored at a temperature range inside the allowed storage range, but outside the allowed operating range – The test set has been turned on for at least 45 minutes – The RF, IF, and Source Alignments 1 have been run within the previous 7 days – An ALL Alignment1 has been run: – Within the previous 8 hours – If the temperature has changed more than 5 °C from the previous “ALL” alignment 1. For more information on using alignments in a manufacturing environment, please see the EXM user documentation. 06 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

Capture depth 4 GB memory, 512 MSa of IQ data Frequency and time specifications Frequency range All RF ports (options are per TRX module) Option E6640A-504 Option E6640A-5WC Option E6640A-506 380 MHz to 3.8 GHz 380 MHz to 6.0 GHz Specified frequency range (dependent on selected frequency range option) 380 to 495 MHz 695 to 920 MHz 1425 to 1485 MHz 1620 to 2030 MHz 2300 to 2700 MHz 3400 to 3800 MHz 4900 to 6000 MHz Frequency reference Accuracy, aging rate, stability Refer to Timebase Specifications CW measurement frequency accuracy Accuracy (Transmitter frequency x frequency reference accuracy) ± 50 Hz typical Resolution 1 Hz typical Analysis bandwidth Maximum bandwidth E6640A-B40 E6640A-B85 380 to 495 MHz 695 to 800 MHz All other specified frequency ranges Up to 40 MHz analysis bandwidth Up to 40 MHz Up to 60 MHz Up to 80 MHz E6640A-B1X 380 to 495 MHz 695 to 800 MHz 3400 to 3800 MHz All other specified frequency ranges Up to 40 MHz Up to 60 MHz Up to 100 MHz Up to 160 MHz Triggering Trigger Sequence analyzer IQ analyzer Free run, external 1, external 2, RF burst, video, internal Free run, external 1, external 2, RF burst, video, line, periodic Trigger delay range –15 to 500 ms Resolution 0.1 μs Amplitude accuracy and range specifications Input level ranges (average power) RF3 I|O and RF4 I|O, E6640A-2FD (half duplex) –70 to +30 dBm RFIO3 and RFIO4, E6640A-4FD (full duplex) –65 to +36 dBm RFIO1 and RFIO2 (full duplex) –65 to +36 dBm Vector signal analyzer performance 07 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

Amplitude accuracy and range specifications (continued) CW absolute amplitude accuracy RF3 I|O and RF4 I|O ports, E6640A-2FD (configured to input mode in specified frequencies) Frequency range Input level ≤ –8 to –70 dBm Input level > –8 to +24 dBm 380 to 495 MHz < ±0.60 dB, < ±0.30 dB typical < ±0.40 dB, < ±0.20 dB typical 695 to 920 MHz < ±0.60 dB, < ±0.30 dB typical < ±0.65 dB, < ±0.35 dB typical 1425 to 1485 MHz < ±0.65 dB, < ±0.30 dB typical < ±0.55 dB, < ±0.25 dB typical 1620 to 2030 MHz 40 MHz BW < ±0.45 dB, < ±0.20 dB typical < ±0.45 dB, < ±0.25 dB typical 160 MHz BW < ±0.70 dB, < ±0.35 dB typical < ±0.70 dB, < ±0.35 dB typical 2300 to 2700 MHz 40 MHz BW < ±0.55 dB, < ±0.25 dB typical < ±0.50 dB, < ±0.20 dB typical 160 MHz BW < ±0.80 dB, < ±0.45 dB typical < ±0.65 dB, < ±0.30 dB typical 3400 to 3800 MHz < ±0.65 dB, < ±0.30 dB typical < ±0.65 dB, < ±0.30 dB typical 4900 to 6000 MHz 40 MHz BW < ±0.75 dB, < ±0.30 dB typical < ±0.60 dB, < ±0.25 dB typical 160 MHz BW < ±0.90 dB, < ±0.50 dB typical < ±0.75 dB, < ±0.40 dB typical RFIO1 and RFIO2 ports (in specified frequencies); RFIO3 and RFIO4 ports, E6640A-4FD (in specified frequencies) only typical specifications apply Frequency range Input level < –8 to –65 dBm Input level ≤ –8 to +33 dBm 380 to 495 MHz < ±0.50 dB, < ±0.25 dB typical < ±0.50 dB, < ±0.25 dB typical 695 to 920 MHz < ±0.60 dB, < ±0.40 dB typical < ±0.65 dB, < ±0.35 dB typical 1425 to 1485 MHz < ±0.65 dB, < ±0.35 dB typical < ±0.50 dB, < ±0.25 dB typical 1620 to 2030 MHz 40 MHz BW < ±0.50 dB, < ±0.25 dB typical < ±0.45 dB, < ±0.20 dB typical 160 MHz BW < ±0.65 dB, < ±0.35 dB typical < ±0.60 dB, < ±0.30 dB typical 2300 to 2700 MHz 40 MHz BW < ±0.55 dB, < ±0.30 dB typical < ±0.50 dB, < ±0.25 dB typical 160 MHz BW < ±0.75 dB, < ±0.40 dB typical < ±0.55 dB, < ±0.25 dB typical 3400 to 3800 MHz < ±0.65 dB, < ±0.30 dB typical < ±0.65 dB, < ±0.30 dB typical 4900 to 6000 MHz 40 MHz BW < ±0.85 dB, < ±0.45 dB typical < ±0.65 dB, < ±0.30 dB typical 160 MHz BW < ±0.95 dB, < ±0.55 dB typical < ±0.90 dB, < ±0.45 dB typical Input voltage standing wave ratio (VSWR) RF3 I|O and RF4 I|O ports, E6640A-2FD (configured to input mode in specified frequencies) 380 to 2030 MHz 2300 to 6000 MHz < 1.4:1 typical < 1.6:1 typical RFIO1 and RFIO2 ports (in specified frequencies); RFIO3 and RFIO4 ports, E6640A-4FD (in specified frequencies) 380 to 2030 MHz 2300 to 3800 MHz 4900 to 6000 MHz < 1.25:1 typical < 1.5:1 typical < 1.7:1 typical Spurious responses (in specified frequencies); RFIO1, RFIO2, RFIO3, RFIO4; RF3 I|O and RF4 I|O ports configured to input mode Residual responses in specified frequency ranges with analyzer ranged to < –30 dBm 380 to 5790 MHz < –85 dBm typical > 5790 to 6000 MHz < –82 dBm typical Other spurious, for offsets from 10 MHz up to half the maximum analysis bandwidth from the signal in specified frequency bands < –62 dBc typical with analyzer ranged to signal peak power level Phase noise (noise sidebands, CF = 900 MHz) 10 kHz offset < –107 dBc/Hz nominal

1 MHz offset < –130 dBc/Hz nominal

Vector signal analyzer performance (continued) 08 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

Arb bandwidth Up to 200 kHz, 76 to 110 MHz1 Up to 20 MHz, 207 to 222 MHz 1 Up to 40 MHz, 380 to 490 MHz Up to 80 MHz, 695 to 800 MHz Up to 160 MHz, all other frequency ranges Arb sample memory (storage capacity) 4 GB memory, 512 MSa of IQ data Frequency specifications Frequency range All RF ports (options are per TRX module) Option E6640A-504 Option E6640A-5WC Option E6640A-506 380 MHz to 3.8 GHz 380 MHz to 6.0 GHz Specified frequency range (dependent on selected frequency range option) 76 to 110 MHz1 207 to 222 MHz1 380 to 490 MHz 490 to 695 MHz1 695 to 960 MHz 1100 to 1325 MHz 1425 to 2180 MHz 2300 to 2700 MHz 3400 to 3800 MHz 4900 to 6000 MHz Frequency reference Accuracy, aging rate, stability Refer to Timebase specifications Amplitude accuracy and range specifications Output level ranges RF3 I|O and RF4 I|O ports, E6640A-2FD (configured to output mode)

380 MHz to 6 GHz –130 to +5 dBm, –130 to +15 dBm CW typical

RFIO1 and RFIO2 ports ; RFIO3 and RFIO4 ports, E6640A-4FD (only typical specifications apply) 380 MHz to 3.8 GHz 3.8 to 6 GHz –130 to –15 dBm, –130 to – 5 dBm CW typical –120 to –20 dBm, –120 to – 15 dBm CW typical Absolute level accuracy (specified frequencies, CW) RF3 I|O and RF4 I|O ports, E6640A-2FD (configured to output mode in specified frequencies) 76 to 110 MHz, 207 to 222 MHz, and 490 to < 695 MHz Level ≤ +5 to –15 dBm < ± 0.15 dB nominal Level < –15 to –80 dBm < ± 0.20 dB nominal Level < –80 to –120 dBm < ± 0.30 dB nominal 380 to 1325 MHz Level ≤ +5 to –15 dBm < ±0.50 dB, < ±0.15 dB typical Level ≤ –15 to –80 dBm < ±0.50 dB, < ±0.20 dB typical Level ≤ –80 to –120 dBm < ±0.65 dB, < ±0.30 dB typical 1425 to 2700 MHz Level ≤ +5 to –15 dBm < ±0.55 dB, < ±0.15 dB typical Level ≤ –15 to –80 dBm < ±0.75 dB, < ±0.35 dB typical Level ≤ –80 to –120 dBm < ±0.85 dB, < ±0.45 dB typical 3400 to 3800 MHz Level ≤ +5 to –15 dBm < ±0.60 dB, < ±0.20 dB typical Level ≤ –15 to –80 dBm < ±0.60 dB, < ±0.30 dB typical Level ≤ –80 to –110 dBm < ±1.10 dB, < ±0.55 dB typical 4900 to 6000 MHz Level ≤ +5 to –15 dBm < ±0.70 dB, < ±0.25 dB typical Level ≤ –15 to –80 dBm < ±0.75 dB, < ±0.30 dB typical Level ≤ –80 to –100 dBm < ±1.00 dB, < ±0.50 dB typical Vector signal generator performance 1. With M9432A TRX with Option-5LF installed 09 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

Amplitude accuracy and range specifications (continued) Absolute level accuracy (specified frequencies, CW) continued RFIO1 and RFIO2 ports (in specified frequencies); RFIO3 and RFIO4 ports, E6640A-4FD (in specified frequencies) only typical specifications apply 76 to 110 MHz, 207 to 222 MHz, and 490 to < 695 MHz 1 Level ≤ –15 to –80 dBm < ± 0.30 dB nominal Level < –80 to –120 dBm < ± 0.35 dB nominal 380 to 1325 MHz Level ≤ –15 to –80 dBm < ±0.65 dB, < ±0.30 dB typical Level ≤ –80 to –120 dBm < ±0.75 dB, < ±0.35 dB typical 1425 to 2700 MHz Level ≤ –15 to –80 dBm < ±0.65 dB, < ±0.40 dB typical Level ≤ –80 to –120 dBm < ±0.75 dB, < ±0.50 dB typical 3400 to 3800 MHz Level ≤ –15 to –80 dBm < ±0.60 dB, < ±0.30 dB typical Level ≤ –80 to –110 dBm < ±1.10 dB, < ±0.55 dB typical 4900 to 6000 MHz Level ≤ –20 to –80 dBm < ±0.90 dB, < ±0.30 dB typical Level ≤ –80 to –100 dBm < ±1.00 dB, < ±0.50 dB typical Setting resolution 0.01 dB VSWR RF3 I|O and RF4 I|O ports, E6640A-2FD (configured to output mode in specified frequencies) 76 to 110 MHz1 < 1.9:1 typical 207 to 222 MHz1 < 1.45:1 typical 380 to 2030 MHz < 1.4:1 typical > 2030 to 5800 MHz < 1.7:1 typical > 5800 MHz < 1.9:1 typical VSWR RFIO1 and RFIO2 ports (in specified frequency ranges); RFIO3 and RFIO4 ports, E6640A-4FD (in specified frequency ranges 76 to 2030 MHz 2 < 1.25:1 typical > 2030 to 3800 MHz < 1.5:1 typical 4900 to 6000 MHz < 1.7:1 typical Harmonics and spurious (in specified frequencies) RF3 I|O and RF4 I|O ports, E6640A-2FD harmonics and sub-harmonics +0 dBm output power < –30 dBc typical RFIO1 and RFIO2 ports; RFIO3 and RFIO4 ports, E6640A-4FD harmonics and sub-harmonics –15 dBm output power < –30 dBc nominal All ports; non-harmonic spurious (CW mode, specified frequency ranges) ≤ 110 MHz 2 < –45 dBc nominal 207 to 222 MHz 2, < –62 dBc nominal 380 MHz to 3.8 GHz 4.85 to 6 GHz < –58 dBc nominal Phase noise RFIO1 and RFIO2 ports, –5 dBm; RFIO3 and RFIO4 ports, E6640A-4FD: –10 dBm; RF3 I|O and RF4 I|O ports, E6640A-2FD: 0 dBm;

1 MHz offset

380 MHz to 3 GHz ≤ –132 dBc nominal

3 to 3.8 GHz ≤ –130 dBc nominal 3.8 to 6 GHz ≤ –128 dBc nominal Vector signal generator performance (continued) 1. With M9432A TRX with Option-5LF installed 2. Frequencies below 380 MHz only applicable with M9432A TRX with Option-5LF 10 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

Accuracy ± [(time since last adjustment x aging rate) + temperature stability + calibration accuracy] typical Frequency stability – aging rate Daily < ±0.5 ppb/day typical, after 72 hour warm-up Yearly < ±0.10 ppm/year typical, after 72 hours warm-up Total 10 years < ±0.6 ppm/10 yrs typical, after 72 hours warm-up Achievable initial calibration accuracy ±5 x 10–8 typical Frequency stability – temperature effects 20 to 30 °C < ±10 ppb typical Full temperature range < ±50 ppb typical Frequency stability – warm up 5 minutes over +20 to +30 °C, 1 hour < ±0.1 ppm typical 15 minutes over +20 to +30 °C, 1 hour < ±0.01 ppm typical Recommended calibration cycle 2 years External reference input Frequency 1 to 50 MHz, sine wave Lock range ±1 ppm nominal Amplitude 0 to 10 dBm nominal Connector 1 BNC Impedance 50 Ω nominal General specifications Power requirements Voltage and frequency 100/120 V, 50/60 Hz and 220/240 V, 50/60 Hz nominal Power consumption 870 W (220 to 240 VAC input)

720 W (100 to 120 VAC input)

With feet installed (W x H x D mm) 449.9 x 190.4 x 581 With feet removed (W x H x D mm) 449.9 x 177.8 x 581 Rack space 4U x 1 rack width Weight (with specified number of TRX modules installed) 1 21.4 kg (47 lbs) 2 22.7 kg (50 lbs) 3 24.5 kg (54 lbs) 4 25.9 kg (57 lbs) Environmental characteristics Operating temperature +5 to +45 °C Storage temperature –40 to +65 °C EMC Complies with European EMC Directive 2004/108/EC – IEC/EN 61326-1, IEC/EN 61326-2-1 – CISPR Pub 11 Group 1, class A – AS/NZS CISPR 11:2002 – ICES/NMB-001 This ISM device complies with Canadian ICES-00. Cet appareil ISM est conforme a la norme NMB-001 du Canada Timebase specifications 11 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

Environmental characteristics (continued) Environmental stress Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual and verified to be robust against the environmental stresses of storage, trans - portation, and end-use; those stresses include, but are not limited to, temperature, humidity, shock, vibration, altitude, and power line conditions; test methods are aligned with IEC 60068-2 and levels are similar to MILPRF-28800F Class 3 Safety – Complies with European Low Voltage Directive 2006/95/EC – IEC/EN 61010-1 – Canada: CSA C22.2 No. 61010-1-04 – USA: UL Std. 61010-1 Audio noise Acoustic noise emission Geraeuschemission LpA < 70 dB LpA < 70 dB Operator position Am Arbeitsplatz Normal position Normaler Betrieb Per ISO 7779 Nach DIN 45635 t.19 Calibration cycle The recommended calibration cycle is two years; calibration services available through Keysight service centers Maximum applied reverse power RF3 I|O and RF4 I|O ports, E6640A-2FD +30 dBm, CW RFIO3 and RFIO4 ports, E6640A-4FD +36 dBm, CW RFIO1 and RFIO2 ports +36 dBm, CW RF I/O port isolation Single TRX, port (as input) to port (as output) < 2700 MHz > 90 dB nominal 3400 to 3800 MHz > 85 dB nominal > 4900 MHz > 80 dB nominal Warranty Standard 3-year warranty Controller characteristics CPU Intel i7-3610QE quad-core CPU clock frequency 2.3 GHz, 3.3 GHz (single-core Turbo Boost) Memory L3 cache 6 MB RAM type DDR3, PC3-12800 204-pin SODIMM sockets RAM capacity 16 GB Operating system Microsoft Windows 7 Professional, 64-bit Data storage Type 2.5 inch SATA II Size 240 GB Remote programming Interface LAN RJ45 General specifications (continued) 12 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

Power Green LED indicating power supply is good Hard drive Yellow LED indicating disc drive activity User Red LED reserved for future use Controller trigger Connector BNC female Trigger Programmable direction LAN TCP/IP interface Standard x 2 1000 Base-T Connector x 2 RJ45 Ethertwist Monitor output Connector DisplayPort, compatible with DisplayPort to VGA adapter USB 3.0 ports Master (2 ports) Standard Compatible with USB 3.0/2.0 Connector USB Type-A female Output current 0.5 A nominal USB 2.0 ports Master (4 ports) Standard Compatible with USB 2.0 Connector USB Type-A female Output current 0.5 A nominal

10 MHz Out

Connector Type-BNC female, 50 Ω nominal Output amplitude 9.5 dBm nominal Ref In Connector Type-BNC female, 50 Ω nominal Characteristics (see Timebase Specifications) RF connections per installed TRX module E6640A-2FD (default option) RF3 I|O and RF4 I|O ports (half duplex) N-Type female, 50 Ω nominal RFIO1 and RFIO2 ports (full duplex) N-Type female, 50 Ω nominal E6640A-4FD (optional) RFIO3 and RFIO4 ports (full duplex) N-Type female, 50 Ω nominal RFIO1 and RFIO2 ports (full duplex) N-Type female, 50 Ω nominal Trigger In 1, Trigger In 2, connections per installed TRX module Connector BNC female Impedance > 10 kΩ nominal Trigger level range –3.5 to +3.5 V Trigger Out 1, Trigger Out 2, connections per installed TRX module Connector BNC female Impedance 50 Ω nominal Trigger level range 3.3 V LVTTL Indicators TRX status LED indicator Front panel 13 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

Power versus time (PvT) Absolute power accuracy ±0.36 dB typical at 0 dBm input power Phase error (GMSK modulation) Average floor 0.30º typical at 0 dBm input power Peak floor 0.85º typical at 0 dBm input power EDGE error vector magnitude (EVM) RMS floor 0.65% typical at 0 dBm input power Peak floor 2.0% typical at 0 dBm input power Output RF spectrum (ORFS for GMSK and 8PSK modulation) Residual relative power, spectrum due to modulation Offset frequency 600 kHz –70 dBc typical at 0 dBm input power

1.2 MHz –75 dBc typical at 0 dBm input power

1.8 MHz –73 dBc typical at 0 dBm input power

Residual relative power, spectrum due to switching Offset frequency 600 kHz –67 dBc typical at 0 dBm input power

1.2 MHz –74 dBc typical at 0 dBm input power

1.8 MHz –76 dBc typical at 0 dBm input power

GSM/EDGE/Evo source key specifications2 Signal quality (RF I|O ports: 0 dBm, RFIO ports: –15 dBm) Phase error (GMSK) RMS < 0.3° nominal Peak < 2.0° nominal EVM (EDGE) RMS < 1% nominal 1. For frequencies from 450 to 490 MHz, 820 to 820 MHz, and 1710 to 1910 MHz 2. For frequencies from 380 to 490 MHz, 695 to 960 MHz, and 1425 to 2180 MHz V9071B GSM/EDGE/Evo measurement application key specifications1 Application Specifications 14 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

V9073B W-CDMA/HSPA+ measurement application key specifications1 Channel power Absolute power accuracy ±0.36 dB typical at 0 dBm input power QPSK EVM Residual EVM 0.85% typical at –10 dBm input power Adjacent channel leakage ratio (ACLR) and adjacent channel power ratio (ACPR) Residual relative power in 3.84 MHz bandwidth (offsets)

5 MHz –65 dBc typical at 0 dBm input power

Spectrum emission mask (SEM) Residual relative power (offsets) 2.515 to 3.485 MHz –80 dBc in a 30 kHz bandwidth typical at 0 dBm input power 4 to 7.5 MHz –65 dBc in a 1 MHz bandwidth typical at 0 dBm input power 7.5 to 8.5 MHz –70 dBc in a 1 MHz bandwidth typical at 0 dBm input power 8.5 to 12 MHz –70 dBc in a 1 MHz bandwidth typical at 0 dBm input power Application Specifications (continued) W-CDMA/HSPA+ source key specifications2 Signal quality (RF I|O ports: 0 dBm, RFIO ports: –15 dBm) Composite EVM RMS < 1% nominal 1. For frequencies from 695 to 920 MHz and specified ranges from 1425 to 2700 MHz 2. For frequencies from 695 to 960 MHz, and 1425 to 2180 MHz 15 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

V9072B cdma2000 and V9076B 1xEV-DO measurement application key specifications1 Channel power Absolute power accuracy ±0.36 dB typical at 0 dBm input power Error vector magnitude (EVM) Residual EVM 0.85% typical at –10 dBm input power Adjacent channel power (ACP) Residual relative power in 30 kHz bandwidth (offsets) 885 kHz –71 dBc typical at 0 dBm input power

1.98 MHz –83 dBc typical at 0 dBm input power

4.0 MHz –82 dBc typical at 0 dBm input power

cdma2000 and 1xEV-DO source key specifications2 Signal quality (RF I|O ports: 0 dBm, RFIO ports: –15 dBm) Composite EVM RMS < 1.1% nominal 1. For frequencies from 410 to 484 MHz, 776 to 920 MHz, and 1710 to 1980 MHz 2. For frequencies from 380 to 490 MHz, 695 to 960 MHz, and 1425 to 2180 MHz Application Specifications (continued) 16 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

Application Specifications (continued) V9080B LTE/LTE-Advanced FDD and V9082B LTE/LTE-Advanced TDD measurement application key specifications1 Transmit power Absolute power accuracy ±0.36 dB typical at 0 dBm input power Error vector magnitude (EVM) Residual EVM 5, 10, 15, 20 MHz bandwidth 0.8% typical at –10 dBm input power Adjacent channel power Minimum carrier power at RF input RF I|O ports –20 dBm RFIO ports –5 dBm Dynamic range E-UTRA –58 dBc nominal UTRA –60 dBc nominal Signal quality (RF I|O ports: 0 dBm, RFIO ports: –15 dBm) Composite EVM 380 MHz to 3.9 GHz RMS < 1.1% nominal > 3.9 to 6 GHz RMS < 1.5% nominal 1. For specified frequency ranges between 695 and 3800 MHz LTE source key specifications1 17 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

V9081B Bluetooth measurement application key specifications1 Channel power Absolute power accuracy ±0.26 dB typical at 0 dBm input power Modulation characteristics Deviation range ±250 kHz nominal EDR modulation accuracy Range (rms DEVM) 0 to 12% nominal Floor 0.6% typical at –20 dBm input power Bluetooth source key specifications2 Bluetooth source performance Bluetooth signal using Signal Studio waveform Basic data rate (ACL) FSK error at –10 dBm at RF I|O ports 0.65% nominal, DH1 packet, GFSK, standard packet, 2402 MHz Enhanced data rate ACP for –10 dBm signal at RF I|O ports 3-DH1 packet, GFSK +D8PSK, standard packet, 2402 MHz –69 dBm nominal, k=2 –72 dBm nominal, k= 3, 4, 5, …78 EDR rms DEVM error < 1% nominal 1. Specifications apply for frequencies between 2400 and 2486 MHz 2. For specified frequency ranges between 1620 and 2700 MHz Application Specifications (continued) 18 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

Application Specifications (continued) V9079B TD-SCDMA measurement application key specifications1 Channel power Absolute power accuracy ±0.36 dB typical at 0 dBm input power Error vector magnitude (EVM) Residual EVM , 1.6 MHz channel bandwidth 0.75% typical at 0 dBm input power Adjacent channel leakage ratio (ACLR) and adjacent channel power ratio (ACPR) Residual relative power in 1.28 MHz bandwidth (offsets)

1.6 MHz –55 dBc typical at 0 dBm input power

3.2 MHz –70 dBc typical at 0 dBm input power

Spectrum emission mask (SEM) Residual relative power (offsets) 2.515 to 3.485 MHz –54 dBc in a 30 kHz bandwidth typical at 0 dBm input power 4 to 7.5 MHz –68 dBc in a 1 MHz bandwidth typical at 0 dBm input power 7.5 to 8.5 MHz –71 dBc in a 1 MHz bandwidth typical at 0 dBm input power Signal quality (RF I|O ports: 0 dBm, RFIO ports: –20 dBm) Composite EVM RMS < 0.5% nominal 1. For specified frequency ranges between 695 and 3800 MHz 2. For specified frequency ranges between 1620 and 2700 MHz TD-SCDMA source key specifications2 19 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

1. SEM transmitter test signal generated by the Keysight Technologies N5182B MXG signal generator

Figure 2. 802.11a/g SEM nominal performance at 2.4 GHz with 20 MHz bandwidth

Wireless LAN source key specifications Error vector magnitude (EVM) Wireless LAN error vector magnitude (EVM performance (using Signal Studio signal noted)) RF I|O (half duplex) ports 802.11b: 2.4 GHz < –28 dB typical (0 to –30 dBm) 802.11g: 2.4 GHz < –50 dB typical (–5 to –15 dBm) 802.11a: 5.8 GHz < –44 dB typical (–5 to –15 dBm) 802.11n: 5.8 GHz at 20 MHz bandwidth < –43 dB typical (–5 to –15 dBm) 802.11n: 5.8 GHz at 40 MHz bandwidth < –44 dB typical (–5 to –15 dBm) 802.11ac: 5.57 GHz at 160 MHz bandwidth < –42 dB typical (–5 to –15 dBm) 22 | Keysight | E6640A EXM Wireless Test Set - Data Sheet

Keysight E6640A EXM Wireless Test Set, Configuration Guide, literature number 5991-3533EN Keysight E6640A EXM Wireless Test Set, Brochure, literature number 5991-3532EN Solutions for LTE-Advanced Manufacturing Test, Application Note, literature number 5991-3762EN Solutions for WLAN 802.11ac Manufacturing Test, Application Note, literature number 5991-4113EN 23 | Keysight | E6640A EXM Wireless Test Set - Data Sheet For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada (877) 894 4414 Brazil 55 11 3351 7010 Mexico 001 800 254 2440 United States (800) 829 4444 Asia Pacific Australia 1 800 629 485 China 800 810 0189 Hong Kong 800 938 693 India 1 800 11 2626 Japan 0120 (421) 345 Korea 080 769 0800 Malaysia 1 800 888 848 Singapore 1 800 375 8100 Taiwan 0800 047 866 Other AP Countries (65) 6375 8100 Europe & Middle East Austria 0800 001122 Belgium 0800 58580 Finland 0800 523252 France 0805 980333 Germany 0800 6270999 Ireland 1800 832700 Israel 1 809 343051 Italy 800 599100 Luxembourg +32 800 58580 Netherlands 0800 0233200 Russia 8800 5009286 Spain 800 000154 Sweden 0200 882255 Switzerland 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) United Kingdom 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-04-23-15) myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. www.pxisa.org PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system. Three-Year Warranty www.keysight.com/find/ThreeYearWarranty Keysight’s commitment to superior product quality and lower total cost of ownership. The only test and measurement company with three-year warranty standard on all instruments, worldwide. www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2008 Quality Management System Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience. Bluetooth and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc., U.S.A. and licensed to Keysight Technologies, Inc. cdma2000 is a US registered certification mark of the Telecommunications Industry Association. WiMAX, Mobile WiMAX, WiMAX Forum, the WiMAX Forum logo, WiMAX Forum Certified and the WiMAX Forum Certified logo are US trademarks of the WiMAX Forum. www.keysight.com/find/exm www.keysight.com/find/e6640a This information is subject to change without notice. © Keysight Technologies, 2014 - 2015 Published in USA, May 18, 2015 5991-4287EN www.keysight.com