V33ZA05

V18ZA05 HARRIS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

Features

• Recognized as “Protectors for Data Communications and Fire Alarm Circuits”, UL File #E135010 to Std. 497B
• VDE Certified. License Number 116895E
• Wide Operating Voltage Range V M(AC)RMS . . . . 4V to 460V
• No Derating Up to 85 o C Ambient
• Radial-Lead Package for Hard-Wired or Printed Circuit Board Designs
• Available in Tape and Reel or Bulk Pack
• Standard Lead Form Options Packaging 14MM, 20MM 5MM, 7MM, 10MM Data Sheet July 1999 [ /Title (ZA Series) /Sub- ject (Radial Lead Metal- Oxide Varis- tors for Low to Mediu m V olt- age Opera- tion) /Autho r () /Key- words (Littel- fuse, Inc., Sup- pres- sion Prod- ucts, TVS, Tran- sient Sup- pres- sion, Protec- tion, Auto- motive,

For ratings of individual members of a series, see Device Ratings and Specifications chart. ZA SERIES UNITS Continuous: Steady State Applied Voltage: AC Voltage Range (V M(AC)RMS DC Voltage Range (V M(DC) 4 to 460 5.5 to 615 V V Transient: Peak Pulse Current (I TM For 8/20 µ Single Pulse Energy Range (Note 1) For 10/1000 µ s Current Wave (W TM 50 to 6500 0.1 to 52 A J Operating Ambient Temperature Range (T A o C Storage Temperature Range (T STG o C Temperature Coefficient ( α V) of Clamping Voltage (V C o C (Dielectric must withstand indicated DC voltage for one minute per MIL-STD 202, Method 301) . . . . Ω CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress o nly rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.. Device Ratings and Specifications (Note 1) VDE Certified. License Number 116895E ZA Series Varistors are listed under UL File No. E135010 as a UL recognized component. PART NUMBER MODEL SIZE DISC DIA. (mm) BRAND MAXIMUM RATING (85 o C) SPECIFICATIONS (25 o CONTINUOUS TRANSIENT VARISTOR VOLT- AGE AT 1mA DC TEST CURRENT MAXIMUM CLAMPING VOLTAGE 8 x 20 µ s TYPICAL CAPACI- TANCE f = 1MHzV RMS V DC ENERGY 10 x 1000 µ s PEAK CURRENT 8 x 20 µ s V M(AC) V M(DC) W TM I TM V NOM MIN V NOM MAX V C I PK C (V) (V) (J) (A) (V) (V) (A) (pF) V8ZA05 5 Z08 4 5.5 0.1 50 6 11 30 1 1400 V8ZA1 7 08Z1 4 5.5 0.4 100 6 11 22 2.5 3000 V8ZA2 10 08Z2 4 5.5 0.8 250 6 11 20 5 7500 V12ZA05 5 Z12 6 8 0.14 50 9 16 37 1 1200 V12ZA1 7 12Z1 6 8 0.6 100 9 16 34 2.5 2500 V12ZA2 10 12Z2 6 8 1.2 250 9 16 30 5 6000 V18ZA05 5 Z18 10 14 0.17 100 14.4 21.6 36 1 1000 V18ZA1 7 18Z1 10 14 0.8 250 14.4 21.6 36 2.5 2000 V18ZA2 10 18Z2 10 14 1.5 500 14.4 21.6 36 5 5000 V18ZA3 14 18Z3 10 14 3.5 1000 14.4 21.6 36 10 11000 V18ZA40 20 18Z40 10 14 80 (Note 2) 2000 14.4 (Note 3) 21.6 37 20 22000 V22ZA05 5 Z22 14 18 0.2 100 18.7 26 43 1 800 V22ZA1 7 22Z1 14 18 0.9 250 18.7 26 43 2.5 1600 V22ZA2 10 22Z2 14 18 2 500 18.7 26 43 5 4000 V22ZA3 14 22Z3 14 18 4 1000 18.7 26 43 10 9000 V24ZA50 20 24Z50 14 18 (Note 4) 100 (Note 2) 2000 19.2 (Note 3) 26 43 20 18000 V27ZA05 5 Z27 17 22 0.25 100 23 31.1 53 1 600 V27ZA1 7 27Z1 17 22 1 250 23 31.1 53 2.5 1300 V27ZA2 10 27Z2 17 22 2.5 500 23 31.1 53 5 3000 V27ZA4 14 27Z4 17 22 5 1000 23 31.1 53 10 7000 V27ZA60 20 27Z60 17 22 120 (Note 2) 2000 23 (Note 3) 31.1 50 20 13000 ZA Series

V33ZA05 5 Z33 20 26 0.3 100 29.5 38 65 1 500 V33ZA1 7 33Z1 20 26 1.2 250 29.5 36.5 65 2.5 1100 V33ZA2 10 33Z2 20 26 3 500 29.5 36.5 65 5 2700 V33ZA5 14 33Z5 20 26 6 1000 29.5 36.5 65 10 6000 V33ZA70 20 33Z70 21 27 150 (Note 2) 2000 29.5 (Note 3) 36.5 58 20 13000 V36ZA80 20 36Z80 23 31 160 (Note 2) 2000 32 (Note 3) 40 63 20 12000 V39ZA05 5 Z39 25 31 0.3 100 35 46 79 1 500 V39ZA1 7 39Z1 25 31 1.2 250 35 43 79 2.5 1100 V39ZA3 10 39Z3 25 31 3 500 35 43 76 5 2700 V39ZA6 14 39Z6 25 31 6 1000 35 43 76 10 6000 V39ZA20 20 39Z20 25 31 20 2000 35 43 76 20 12000 V47ZA05 5 Z47 30 38 0.4 100 42 55 93 1 400 V47ZA1 7 47Z1 30 38 1.8 250 42 52 93 2.5 800 V47ZA3 10 47Z3 30 38 4.5 500 42 52 93 5 2000 V47ZA7 14 47Z7 30 38 8.8 1000 42 52 93 10 4500 V47ZA20 20 47Z20 30 38 23 2000 42 52 93 20 11000 V56ZA05 5 Z56 35 45 0.5 100 50 66 110 1 360 V56ZA2 7 56Z2 35 45 2.3 250 50 62 110 2.5 700 V56ZA3 10 56Z3 35 45 5.5 500 50 62 110 5 1800 V56ZA8 14 56Z8 35 45 10 1000 50 62 110 10 3900 V56ZA20 20 56Z20 35 45 30 2000 50 62 110 20 10000 V68ZA05 5 Z68 40 56 0.6 100 61 80 135 1 300 V68ZA2 7 68Z2 40 56 3 250 61 75 135 2.5 600 V68ZA3 10 68Z3 40 56 6.5 500 61 75 135 5 1500 V68ZA10 14 68Z10 40 56 13 1000 61 75 135 10 3300 V68ZA20 20 68Z20 40 56 33 2000 61 75 135 20 10000 V82ZA05 5 Z82 50 68 2 400 73 97 135 5 240 V82ZA2 7 82Z2 50 68 4 1200 73 91 135 10 500 V82ZA4 10 82Z4 50 68 8 2500 73 91 135 25 1100 V82ZA12 14 82Z12 50 68 15 4500 73 91 145 50 2500 V100ZA05 5 Z100 60 81 2.5 400 90 117 165 5 180 V100ZA3 7 100Z 60 81 5 1200 90 110 165 10 400 V100ZA4 10 100Z4 60 81 10 2500 90 110 165 25 900 V100ZA15 14 100Z15 60 81 20 4500 90 110 175 50 2000 Device Ratings and Specifications (Note 1) (Continued) VDE Certified. License Number 116895E ZA Series Varistors are listed under UL File No. E135010 as a UL recognized component. PART NUMBER MODEL SIZE DISC DIA. (mm) BRAND MAXIMUM RATING (85 o C) SPECIFICATIONS (25 o CONTINUOUS TRANSIENT VARISTOR VOLT- AGE AT 1mA DC TEST CURRENT MAXIMUM CLAMPING VOLTAGE 8 x 20 µ s TYPICAL CAPACI- TANCE f = 1MHzV RMS V DC ENERGY 10 x 1000 µ s PEAK CURRENT 8 x 20 µ s V M(AC) V M(DC) W TM I TM V NOM MIN V NOM MAX V C I PK C (V) (V) (J) (A) (V) (V) (A) (pF) ZA Series

V120ZA05 5 Z120 75 102 3 400 108 138 205 5 140 V120ZA1 7 120Z 75 102 6 1200 108 132 205 10 300 V120ZA4 10 120Z4 75 102 12 2500 108 132 200 25 750 V120ZA6 14 120Z6 75 102 22 4500 108 132 210 50 1700 V120ZA20 20 120Z20 75 102 33 6500 108 132 210 100 1500 V150ZA05 5 Z150 92 127 4 400 135 173 250 5 120 V150ZA1 7 Z051 95 127 8 1200 135 165 250 10 250 V150ZA4 10 150Z4 95 127 15 2500 135 165 250 25 600 V150ZA8 14 150Z8 95 127 20 4500 135 165 250 50 1400 V150ZA20 20 150Z20 95 127 45 6500 135 165 250 100 1000 V180ZA05 5 Z180 110 153 5 400 162 207 295 5 100 V180ZA1 7 180Z 115 153 10 1200 162 198 300 10 200 V180ZA5 10 180Z5 115 153 18 2500 162 198 300 25 500 V180ZA10 14 180Z10 115 153 35 4500 162 198 300 50 1100 V180ZA20 20 180Z20 115 153 52 6500 162 198 300 100 2400 V205ZA05 5 Z205 130 170 5.5 400 184 226 340 5 100 V220ZA05 5 Z220 140 180 6 400 198 253 360 5 90 V240ZA05 5 Z240 150 200 7 400 216 264 395 5 80 V270ZA05 5 Z270 175 225 7.5 400 243 311 455 5 70 V330ZA05 5 Z330 210 275 9 400 297 380 540 5 60 V360ZA05 5 Z360 230 300 9.5 400 324 396 595 5 55 V390ZA05 5 Z390 250 330 10 400 351 449 650 5 50 V430ZA05 5 Z430 275 369 11 400 387 495 710 5 45 V470ZA05 5 Z470 300 385 12 400 420 517 775 5 35 V620ZA05 5 Z620 385 505 13 400 558 682 1025 5 33 V680ZA05 5 Z680 420 560 14 400 610 748 1120 5 32 V715ZA05 5 Z715 440 585 15.5 400 643 787 1180 5 31 V750ZA05 5 Z750 460 615 17 400 675 825 1240 5 30 NOTES: respectively. 2. Energy rating for impulse duration of 30ms minimum to one half of peak current (auto load dump). 3. 10mA DC test current. 4. Also rated to withstand 24V for 5 minutes. 5. Higher voltages available, contact Littelfuse. Also listed to UL1449, Second Edition, “Transient Voltage Surge Suppressors” File #E75961. Device Ratings and Specifications (Note 1) (Continued) VDE Certified. License Number 116895E ZA Series Varistors are listed under UL File No. E135010 as a UL recognized component. PART NUMBER MODEL SIZE DISC DIA. (mm) BRAND MAXIMUM RATING (85 o C) SPECIFICATIONS (25 o CONTINUOUS TRANSIENT VARISTOR VOLT- AGE AT 1mA DC TEST CURRENT MAXIMUM CLAMPING VOLTAGE 8 x 20 µ s TYPICAL CAPACI- TANCE f = 1MHzV RMS V DC ENERGY 10 x 1000 µ s PEAK CURRENT 8 x 20 µ s V M(AC) V M(DC) W TM I TM V NOM MIN V NOM MAX V C I PK C (V) (V) (J) (A) (V) (V) (A) (pF) ZA Series

seconds) per pulse times the number of pulses per second. be derated at high temperatures as shown in Figure 1. FIGURE 1. CURRENT, ENERGY AND POWER DERATING FIGURE 2. PEAK PULSE CURRENT TEST WAVEFORM FIGURE 3. CLAMPING VOLTAGE FOR V8ZA05 - V68ZA05 FIGURE 4. CLAMPING VOLTAGE FOR V82ZA05 - V330ZA05

8 TO 68VN(DC) RATING

82 TO 330VN(DC) RATING

FIGURE 5. CLAMPING VOLTAGE FOR V360ZA05 - V750ZA05 FIGURE 6. CLAMPING VOLTAGE FOR V8ZA1 - V68ZA2 FIGURE 7. CLAMPING VOLTAGE FOR V82ZA2 - V180ZA1 FIGURE 8. CLAMPING VOLTAGE FOR V8ZA2 - V68ZA3 FIGURE 9. CLAMPING VOLTAGE FOR V82ZA4 - V180ZA5 FIGURE 10. CLAMPING VOLTAGE FOR V18ZA3 - V68ZA10

360 TO 750VN(DC) RATING

82 TO 180V

8 TO 68V

18 TO 68VN(DC) RATING

FIGURE 11. CLAMPING VOLTAGE FOR V82ZA12 - V180ZA10 FIGURE 12. CLAMPING VOLTAGE FOR V18ZA40 - V36ZA80 FIGURE 13. CLAMPING VOLTAGE FOR V39ZA20 - V180ZA20

82 TO 180VN(DC) RATING

18 TO 36V

39 TO 180VM(AC) RATING V180ZA20

FIGURE 14. SURGE CURRENT RATING CURVES FOR V8ZA05 FIGURE 15. SURGE CURRENT RATING CURVES FOR

0.1 SURGE CURRENT (A)

FIGURE 16. SURGE CURRENT RATING CURVES FOR FIGURE 17. SURGE CURRENT RATING CURVES FOR FIGURE 18. SURGE CURRENT RATING CURVES FOR FIGURE 19. SURGE CURRENT RATING CURVES FOR FIGURE 20. SURGE CURRENT RATING CURVES FOR FIGURE 21. SURGE CURRENT RATING CURVES FOR

0.2 SURGE CURRENT (A)

Tape and Reel Specifications Tape and Reel Data

• Conforms to ANSI and EIA specifications
• Can be supplied to IEC Publication 286-2
• Radial devices on tape are supplied with crimped leads, straight leads, or under- crimped leads SYMBOL PARAMETER MODEL SIZE 5mm 7mm 10mm 14mm 20mm W Tape Width 18.0 + 1.0 18.0 - 0.5 18.0 + 1.0 18.0 - 0.5 18.0 + 1.0 18.0 - 0.5 18.0 + 1.0 18.0 - 0.5 18.0 + 1.0 18.0 - 0.5 W1 Hole Position 9.0 + 0.75 9.0 - 0.50 9.0 + 0.75 9.0 - 0.50 9.0 + 0.75 9.0 - 0.50 9.0 + 0.75 9.0 - 0.50 9.0 + 0.75 9.0 - 0.50 H Height from Tape Center to Component Base 18.0 + 2.0 18.0 - 0.0 18.0 + 2.0 18.0 - 0.0 18.0 + 2.0 18.0 - 0.0 18.0 + 2.0 18.0 - 0.0 18.0 + 2.0 18.0 - 0.0 ∆p Component Alignment 3 o Max 3 o Max 3 o Max 3 o Max 3 o Max NOTE: Dimensions are in mm. ZA Series

Tape and Reel Ordering Information Crimped leads are standard on ZA types supplied in tape and reel and are denoted by the model letter “T”. Model letter “S” denotes straight leads and letter “U” denotes special under-crimped leads. Example: STANDARD MODEL CRIMPED LEADS STRAIGHT LEADS UNDER- CRIMPED LEADS V18ZA3 V18ZT3 V18ZS3 V18ZU3 SHIPPING QUANTITY SIZE RMS (MAX) VOLTAGE QUANTITY PER REEL 5mm All 1000 1000 1000 7mm All 1000 1000 1000 10mm All 1000 1000 1000 14mm < 300V 500 500 500 14mm ≥ 300V 500 500 500 20mm < 300V 500 500 500 20mm ≥ 300V 500 500 500 Mechanical Dimensions SYM- BOL VOLTAGE MODEL VARISTOR MODEL SIZE 5mm 7mm 10mm 14mm 20mm MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX A All - (0.394) (0.472) (0.630) (0.787) 26.5 (1.043) ØD All - (0.276) (0.354) 12.5 (0.492) (0.669) (0.906) eA l l 4 (0.157) (0.236) (0.157) (0.236) 6.5 (0.256) 8.5 (0.335) 6.5 (0.256) 8.5 (0.335) 6.5 (0.256) (Note 6) 8.5 (0.335) (Note 6) e1 V8ZA- V56ZA (0.039) (0.118) (0.039) (0.118) (0.039) (0.118) (0.039) (0.118) (0.039) (0.118) V68ZA- V100ZA 1.5 (0.059) 3.5 (0.138) 1.5 (0.059) 3.5 (0.138) 1.5 (0.059) 3.5 (0.138) 1.5 (0.059) 3.5 (0.138) NA (NA) NA (NA) V120ZA- V180ZA (0.039) (0.118) (0.039) (0.118) (0.039) (0.118) (0.038) (0.118) NA (NA) NA (NA) V205ZA- V750ZA 1.5 (0.059) 3.5 (0.138) E V8ZA- V56ZA (0.197) (0.197) (0.197) (0.197) (0.197) V68ZA- V100ZA 5.6 (0.220) 5.6 (0.220) 5.6 (0.220) 5.6 (0.220) 5.6 (0.220) V120ZA- V180ZA (0.197) (0.197) (0.197) (0.197) (0.197) V205ZA- V750ZA 5.6 (0.220) Øb All 0.585 (0.023) 0.685 (0.027) 0.585 (0.023) 0.685 (0.027) 0.76 (0.030) 0.86 (0.034) 0.76 (0.030) 0.86 (0.034) 0.76 (0.030) 0.86 (0.034) NOTES: Dimensions in millimeters, inches in parentheses. 6. 10mm ALSO AVAILABLE; See Additional Lead Style Options. Dimension E = 5.85 min. ZA Series

Additional Lead Style Options Radial lead types can be supplied with combination preformed crimp and trimmed leads. This option is supplied to the dimensions shown. *SEATING PLANE INTERPRETATION PER IEC-717 CRIMPED AND TRIMMED LEAD

• To order this crimped and trimmed lead style, standard radial type model numbers are changed by replacing the model letter “ZA” with “ZC”. This option is supplied in bulk only. Example:
• For crimped leads without trimming and any variations to the above, contact Littelfuse.
• For 10/ ±1mm lead spacing on 20mm diameter models only; append standard model numbers by adding “X10”. Example:

Ordering Information

MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX 13.0 (0.512) (0.591) 19.5 (0.768) 22.5 (0.886) 29.0 (1.142) LTRIM 2.41 (0.095) 4.69 (0.185) 2.41 (0.095) 4.69 (0.185) 2.41 (0.095) 4.69 (0.185) 2.41 (0.095) 4.69 (0.185) 2.41 (0.095) 4.69 (0.185) NOTE: Dimensions in millimeters, inches in parentheses. STANDARD CATALOG MODEL ORDER AS: V18ZA3 V18ZC3 STANDARD CATALOG MODEL ORDER AS: V18ZA40 V18ZA40X10 VARISTOR VARISTOR NOMINAL VOLTAGE (VNOM) (One, Two or Three Digits) SERIES DESIGNATOR/ LEAD STYLE DESIGNATOR ZC = Crimped and Clipped ZS = Straight ZT = Crimped ZU = Under Crimped V XXX ZA XX RELATIVE ENERGY INDICATOR (One or Two Digits) ZA Series