TZ03K200B001A00 | DigiCamel IC Datasheet

Online Datasheet

Read TZ03K200B001A00 online.

TZB4Z250AB10R00 MURATA | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 46

Technical content

Manufacturing Co., Ltd. Cat.No.T13E-7 Ceramic Trimmer Capacitors CERAMIC TRIMMER CAPACITORS Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26

Selection Guide of CeramicTrimmer Capacitor 3 TZR1 Series 4 TZS2 Series 8 TZY2 Series 13 TZV2 Series 18 TZC3 Series 23 TZB4 Series 28 TZ03 Series 34 Packaging 41 CONTENTS 1 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26

t A y 001 q TZ u R00 r 200 e R w o Part Numbering The structure of the "Global Part Numbers" that have been adopted since June 2001 and the meaning of each code are described herein. If you have any questions about details, inquire at your usual Murata sales office or distributor.() (Global Part Number) qProduct ID TZ Trimmer Capacitors Product ID rMaximum Capacitance Expressed by three figures. The unit is pico-farad(pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two numbers. If there is a decimal point, it is expressed by the capital letter "R ". In this case, all figures are significant digits. Ceramic Trimmer Capacitors tTerminal Shape Code Terminal Shape A B C D E F N T Y Top Adjustment; Top Adjustment; Rear Adjustment; Top Adjustment; Rear Adjustment; Top Adjustment; Rear Adjustment; Top Adjustment; Rear Adjustment; Top Adjustment; Side Adjustment; TZR1 ,TZS2 ,TZY2 , TZV2 ,TZC3 ,TZB4 (SMD Type) TZB4 (SMD Type), TZ03 (Lead Type) TZB4 (Lead Type) TZB4 (Lead Type) TZ03 (Lead Type), TZB4 (SMD Type) TZ03 (Lead Type) TZ03 (Lead Type) TZ03 (Taping Type) TZ03 (Lead Type) uPackaging Code A00 B00 M00 R00 R01 Ammo Pack (Radial Taping) Bulk Magazine Reel (Taping ø180mm) Reel (Taping ø330mm) Packaging wSeries/Terminal Code 6mm Size Lead Type 4mm Size SMD/Lead Type 3mm Size SMD Type 2mm Size SMD Type (Height 1.0mm) 2mm Size SMD Type (Height 1.25mm) 2mm Size SMD Type (Height 1.45mm) 1mm Size SMD Type (Height 0.90mm) Series/Terminal eTemperature Characteristics Code Z S N T R K P NP0 ppm/°C N150ppm/°C N200ppm/°C N450ppm/°C N750ppm/°C N1000ppm/°C N1200ppm/°C Temperature Characteristics Please refer to dimensions for terminals in detail. yIndividual Specification Code 001 110 169 310 A10 B10 TZR1 ,TZS2 ,TZY2 Standard Type TZV2 ,TZC3 (Minus Slot) Standard Type TZ03 Standard Type TZC3 (Plus Slot) Standard Type TZB4 No-cover Film Standard Type TZB4 with Cover Film Standard Type Individual Specifications Please refer to ratings for tolerance of temperature characteristics. Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26

Height 0.90mm max. 1.5(W )x1.7(L) TZR 1 Height 3.20mm max. 4.0(W )x4.5(L) Height 3.20mm max. 4.0(W )x4.5(L) Height 1.00mm max. 2.2(W )x2.7(L) TZS2 Height 1.25mm max. 2.5(W )x3.2(L) TZY2 Height 1.45mm max. 2.3(W )x3.2(L) TZV2 Height 3.20mm max. 4.0(W )x4.5(L) TZB 4_A A TZB 4_EATZB 4_BA Height 1.70mm max. 3.2(W )x4.5(L) (M inus Slot) TZC 3 (Plus Slot) TZC 3 Height 1.80mm max. 3.2(W )x4.5(L) TZB 4_A B TZB 4_B B Bulk TZB 4_EB TZB 4_C Height 5.30mm max. 6.0(W ) 6.0(L) TZ03_Y TZB 4_D Height 7.70mm max. 7.0(W )x7.5(L) Height 6.60mm max. 6.0(W )x6.0(L) TZ03_T TZ03_E TZ03_N TZ03_F TZ03_B Start Insertion Method Soldering Method Mounting Method Surface Mount Insertion to PCB Reflow Flow Manual Insertion Autmatic Insertion Selection G uide of C eram icTrim m er C apacitor Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26

1 Ceramic Trimmer Capacitors

Ultra-small and thin type with external dimensions of 1.5(W)x1.7(L)x0.85(H)mm. (80% less in volume from the current product.) 2. Unique construction with no plastic material provides superior soldering heat resistance to maintain excellent characteristic performance after reflow soldering. 3. Harmful materials (lead etc.) are not contained in the product. 4. Includig the fixed capacitor in parallel with trimmer capacitor makes reduction of space and cost of mounting in circuit. Please contact us about the capacitance value of built-in fixed capacitor. n Applications 1. Bluetooth 2. Crystal oscillators 3. Crystal filters 4. Hand radios 5. Miniature tuner pack (FM Radio, TV) 6. Remote keyless entry systems 7. Pagers 0.35 0.9 max. 1.5 0.45 1.7 0.2 (Depth;0.15) (Tolerance : ±0.1)in mm Part Number Cmin. (pF) Cmax. (pF) TC Q Rated Voltage Withstanding Voltage Insulation Resistance : 10000M ohm min. Torque : 0.1~1.0mN.m Operating Temperature Range : -25 ~ +85°C n Construction Cover Metal Rotor Monolithic Stator

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 n Temperature Characteristics TZR1Z040 200−10 −25 65 85 −10 −12 Z040 (N P0–500 ppm /˚C ) C ap.C hange(% ) Tem p.(˚C ) TZR1R080 0−10−25 45 65 85 −10 −12 R 080 (N 750±500 ppm /˚C ) C ap.C hange(% ) Tem p.(˚C ) n Frequency Characteristics TZR1Z040 1000 1000 100 Q 100 500 1000 1500 2000 2500 Frequency(M H z) C apacitance(pF) Z040 TZR1R080 1000 1000 100 Q 100 500 1000 1500 2000 Frequency(M H z) C apacitance(pF) R 080 n Land Pattern 2.2 1.2 0.5 Tolerance:±0.1 in m m n Temperature Profile 230 183 100 20 sec. m ax.60 sec. to 120 sec. (Solder m elting zone) Preheating (in air) G radual C ooling (in air)Solderring Tem perature (°C ) Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Continued from the preceding page. n Screwdriver Screw driver for M anual Adjustm ent M urata Part N o. : K M D R 160 Please use the follow ing recom m ended screw driver. You can order this driver w ith below part num ber. Though you can also adjust the capacitance value by com m ercial products, please use one w hich has the sam e head size as the below driver. 1.5 Bit shape : M inus(0.3×0.13) (in m m ) n Notice (Storage and operating condition) 1. D o not use the trim m er capacitor under atm osphere of R TV silicone rubber (R oom Tem perature Vulcanizing Silicone R ubber) except Acetone liberating silicone sealant. 2. Before using trim m er capacitor, please store under the condition of -10 to +40 C . and 30 to 85% R H . 3. D o not store in or near corrosive gasses. 4. U se w ithin 6 m onths of deliverly. 5. O pen the package just before using. 6. Prior to storing previously opened packages, the packaging should be heat-sealed. Avoid using rubber bands for repackage. 7. D o not store under direct sunlight. 8. D o not use the trim m er capacitor under the conditions listed below . (1) C orrosive gasses atm osphere (Ex. C hlorine gas, H ydrogen sulfide gas, Am m onia gas, Sulfuric acid gas, N itric oxie gas, etc.) (2) In liquid (Ex. w ater, oil, m edical liquid, organic solvent, etc.) (3) D usty / dirty atm osphere (4) D irect sunlight (5) Static voltage nor electric/m agnetic fields (6) D irect sea breeze (7) O ther variations of the above n Notice (Soldering) 1. Soldering (1) TZR 1 series can be soldered by reflow soldering m ethod and soldering iron. D o not use flow soldering m ethod (dipping). (2) Standard soldering condition (a) R eflow soldering : R efer to the standard tem perature profile. (b) Soldering iron: > Tem perature of tip 260+-10 C . > Soldering tim e 3 sec. m ax. > D iam eter 0.5m m m ax. > W attage of iron 20W m ax. Before using other soldering conditions than those listed above, please consult w ith M urata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive tim e and/or excessive tem perature, the trim m er capacitor m ay deviate from the specified characteristics. (3) The am ount of solder is critical. (4) The thickness of solder paste should be printed from 100m icro m to 150m icro m and the dim ension of land pattern should be used M urata's standard land pattern at reflow soldering. Insufficient am ounts of solder can lead to insufficient soldering strength on PC B. Excessive am ounts of solder m ay cause the bridging betw een the term inals or the contact failure due to flux w icking up. (5) W hen using soldering iron, the diam eter of the string solder shall be less than 0.5m m . The string solder shall be applied to the low er part of the term inal only and do not apply flux except the term inals. Excessive am ounts of solder and/or applying solder to the upper part of the term inal m ay cause fixed m etal rotor or the contact failure due to flux invasion into the m ovable part and/or the contact point. The soldering iron should not com e in contact w ith the m onolithic stator of the trim m er capacitor. If such contact does occur, the trim m er capacitor m ay be dam aged. (6) O ur recom m endable chlorine content of solder is as follow s. (a) Solder paste: 0.2w t% m ax. (b) String solder: 0.5w t% m ax. (7) D o not use w ater-soluble flux (for w ater Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Continued from the preceding page. cleaning). To prevent the deterioration of trim m er capacitor characteristics, apply flux only to term inals. 2. M ounting (1) D o not apply excessive force (preferable 5.0N (R ef.; 500gf)m ax.), w hen the trim m er capacitor is m ounted on the PC B. (2) D o not w arp and/or bend PC B to prevent trim m er capacitor from breakage. (3) U se the suitable dim ension of the pick-up nozzle. (1.1-1.2m m external diam eter and 0.8-0.9m m bore diam eter.) 3. C leaning C an not be cleaned because of open construction. 4. O ther N ote the polarity of the trim m er capacitor to m inim ize influence by stray capacitance. (R efer to the dim ensions concerning the polarity.) n Notice (Handling) 1. U se suitable screw drivers that fit com fortably in driver slot. *R ecom m ended screw driver for m anual adjustm ent M U R ATA : KM D R 160 2. W hen adjusting w ith a screw driver, do not apply excessive force(preferable 0.5N (R ef;50gf) m ax.) to m inim ize capacitance drift. If excessive force applied to the screw driver slot, it m ay cause deform ation of the products. 3. D o not apply adhesive, lock paints, or any other substances to the trim m er capacitor to secure the rotor position. They m ay cause corrosion or electrical contact problem s. n Notice (Other) 1. Before using trim m er capacitor, please test after assem bly in your particular m ass production system . 2. W e have an application m anual for trim m er capacitor. (O nly for chip type) If you need it, please feel free to contact us.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Ceramic Trimmer Capacitors TZS2 Series n Features 1. U ltra-sm all and thin type w ith external dim ensions of 2.2(W )x2.7(L)x0.95(H )m m . (30% less in volum e from the current product.) 2. U nique construction w ith no plastic m aterial provides superior soldering heat resistance to m aintain excellent characteristic perform ance after reflow soldering. 3. Pierced square hole allow s for high resistance to tuning force and in-process autom atic adjustm ent. 4. Includig the fixed capacitor in parallel w ith trim m er capacitor m akes reduction of space and cost of m ounting in circuit. Please contact us about the capacitance value of built-in fixed capacitor. n Applications

C rystal oscillators •C rystal filters
H and radios •C ordless telephones
C ellular telephones •Tuner packs
Pagers •R em ote keyless entry system s
PH S •R adar detectors
W -LAN •C om pact radios
H eadphone stereos in m m Tolerance:–0.1 2.7 1.0 1.0m ax. 2.2 0.6 0.4

0.20 D epth

Part Number Cmin. (pF) Cmax. (pF) TC Q Rated Voltage Withstanding Voltage Insulation R esistance : 10000M ohm m in. Torque : 0.5~5.0m N m O perating Tem perature R ange : -25~+85°C n Construction C over M etal R otor M onolithic Stator

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 n Temperature Characteristics TZS2Z060 200−10 −25 65 85 −10 −12 Z060 (N P0–300 ppm /˚C ) C ap.C hange(% ) Tem p.(˚C ) TZS2Z100 200−10 −25 65 85−2 −10 −12 Z100 (N P0–300 ppm /˚C ) C ap.C hange(% ) Tem p.(˚C ) TZS2R200 0−10−25 45 65 85 −10 −12 R 200 (N 750±500 ppm /˚C ) C ap.C hange(% ) Tem p.(˚C ) n Frequency Characteristics TZS2Z060 Z060 Q 1000 100 500 1000 1500 2000 1000 100 Frequency (M H z) C apacitance (pF) TZS2Z100 Z100 Q 1000 100 200 600400 800 1000 1000 100 Frequency (M H z) C apacitance (pF) Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Continued from the preceding page. n Frequency Characteristics TZS2R200 R 200 Q 1000 100 200 1000600 800400 1000 100 Frequency (M H z) C apacitance (pF) n Land Pattern 3.2 2.1 1.0 Tolerance:±0.1 in m m n Temperature Profile 230 183 100 20 sec. m ax.60 sec. to 120 sec. (Solder m elting zone) Preheating (in air) G radual C ooling (in air)Solderring Tem perature (°C ) n Screwdriver and Screwdriver Bit Screw driver for M anual Adjustm ent M urata Part N o. : K M D R 050 Please use the follow ing recom m ended screw driver. You can order this driver w ith below part num ber. Though you can also adjust the capacitance value by com m ercial products, please use one w hich has the sam e head size as the below driver. (in m m ) (in m m ) Screw driver Bit for Autom atic Adjustm ent M urata Part N o. : K M B T050 Bit shape ; Q uadrangle (0.54×0.54) 1.5 20 1.8 dia. Bit shape ; Q uadrangle (0.54×0.54)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 n Notice (Storage and operating condition) 1. D o not use the trim m er capacitor under atm osphere of R TV silicone rubber (R oom Tem perature Vulcanizing Silicone R ubber) except Acetone liberating silicone sealant. 2. Before using trim m er capacitor, please store under the condition of -10 to +40 C . and 30 to 85% R H . 3. D o not store in or near corrosive gasses. 4. U se w ithin 6 m onths of deliverly. 5. O pen the package just before using. 6. Prior to storing previously opened packages, the packaging should be heat-sealed. Avoid using rubber bands for repackage. 7. D o not store under direct sunlight. 8. D o not use the trim m er capacitor under the conditions listed below . (1) C orrosive gasses atm osphere (Ex. C hlorine gas, H ydrogen sulfide gas, Am m onia gas, Sulfuric acid gas, N itric oxie gas, etc.) (2) In liquid (Ex. w ater, oil, m edical liquid, organic solvent, etc.) (3) D usty / dirty atm osphere (4) D irect sunlight (5) Static voltage nor electric/m agnetic fields (6) D irect sea breeze (7) O ther variations of the above n Notice (Soldering) 1. Soldering (1) TZS2 series can be soldered by reflow soldering m ethod and soldering iron. D o not use flow soldering m ethod (dipping). (2) Standard soldering condition (a) R eflow soldering : R efer to the standard tem perature profile. (b) Soldering iron: > Tem perature of tip 260+-10 C . > Soldering tim e 3 sec. m ax. > D iam eter 1m m m ax. > W attage of iron 20W m ax. Before using other soldering conditions than those listed above, please consult w ith M urata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive tim e and/or excessive tem perature, the trim m er capacitor m ay deviate from the specified characteristics. (3) The am ount of solder is critical. (4) The thickness of solder paste should be printed from 100m icro m to 150m icro m and the dim ension of land pattern should be used M urata's standard land pattern at reflow soldering. Insufficient am ounts of solder can lead to insufficient soldering strength on PC B. Excessive am ounts of solder m ay cause the bridging betw een the term inals or the contact failure due to flux w icking up. (5) W hen using soldering iron, the diam eter of the string solder shall be less than 0.5m m . The string solder shall be applied to the low er part of the term inal only and do not apply flux except the term inals. Excessive am ounts of solder and/or applying solder to the upper part of the term inal m ay cause fixed m etal rotor or the contact failure due to flux invasion into the m ovable part and/or the contact point. The soldering iron should not com e in contact w ith the m onolithic stator of the trim m er capacitor. If such contact does occur, the trim m er capacitor m ay be dam aged. (6) O ur recom m endable chlorine content of solder is as follow s. (a) Solder paste : 0.2w t% m ax. (b) String solder : 0.5w t% m ax. (7) D o not use w ater-soluble flux (for w ater cleaning). To prevent the deterioration of trim m er capacitor characteristics, apply flux only to term inals. 2. M ounting (1) D o not apply excessive force (preferable 5.0N (R ef.; 500gf)m ax.), w hen the trim m er capacitor is m ounted on the PC B. (2) D o not w arp and/or bend PC B to prevent trim m er capacitor from breakage. (3) U se the suitable dim ension of the pick-up nozzle. (1.8m m external diam eter and 1.3m m bore diam eter.) 3. C leaning C an not be cleaned because of open construction. 4. O ther N ote the polarity of the trim m er capacitor to m inim ize influence by stray capacitance. (R efer to the dim ensions concerning the polarity.)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 n Notice (Handling) 1. U se suitable screw drivers that fit com fortably in driver slot. (1) R ecom m ended screw driver for m anual adjustm ent M U R ATA : KM D R 050 (2) R ecom m ended screw driver bit for autom atic adjustm ent M U R ATA : KM BT050 2. W hen adjusting w ith a screw driver, do not apply excessive force(preferable 1.0N (R ef;100gf) m ax.) to m inim ize capacitance drift. If excessive force applied to the screw driver slot, it m ay cause deform ation of the products. 3. D o not apply adhesive, lock paints, or any other substances to the trim m er capacitor to secure the rotor position. They m ay cause corrosion or electrical contact problem s. n Notice (Other) 1. Before using trim m er capacitor, please test after assem bly in your particular m ass production system . 2. W e have an application m anual for trim m er capacitor. (O nly for chip type) If you need it, please feel free to contact us.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Ceramic Trimmer Capacitors TZY2 Series n Features 1. Sm all and thin size available-just 2.5(W )x3.2(L)x1.25(H )m m . 2. N ew shape of cover can im prove the flux invasion com pared w ith current products. 3. Im provem ent of the adhesion betw een rotor and stator leads superior stability. 4. U nique construction w ith no plastic m aterial provides superior soldering heat resistance to m aintain excellent characteristic perform ance after reflow soldering. n Applications

C rystal oscillators •C rystal filters
Pagers •C ordless telephones
PH S •H and radios
C ellular telephones •W atches
R em ote keyless entry system s
W -LAN •R adar detectors
C om pact radios •D VD
Burglarproof devices •H eadphone stereos 3.2–0.2 2.5–0.2 1.25m ax. 0.95 1.0 0.45 0.5 *1 *1 1.4 O nly 45pF type does not have this shaded area. *1 : (Tolerance : ±0.1)in m m Part Number Cmin. (pF) Cmax. (pF) TC Q Rated Voltage Withstanding Voltage Insulation R esistance : 10000M ohm m in. Torque : 0.5~5.0m N m O perating Tem perature R ange : -25~+85°C n Construction C over M etal R otor M onolithic Stator

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 n Temperature Characteristics TZY2Z2R5 200−10 −25 65 85−2 −10 −12 Z2R 5 (N P0–300 ppm /˚C ) Tem p.(˚C ) C ap.C hange(% ) TZY2Z100 200−10 −25 65 85−2 −10 −12 Z100 (N P0–300 ppm /˚C ) C ap.C hange(% ) Tem p.(˚C ) TZY2R200 0−10−25 45 65 85 −10 −12 R 200 (N 750±500 ppm /˚C ) C ap.C hange(% ) Tem p.(˚C ) TZY2K450 K450 (N 1000–500ppm /°C ) Tem p. (°C ) C ap. C hange (% ) +12 +10 –10 –12 20 45 025 65 85 n Frequency Characteristics TZY2Z2R5 Z2R 5 1000 100 Q 500 1000 1500 2000 2500 3000 1000 100 Frequency (M H z) C apacitance (pF) TZY2Z100 Z100 Q 1000 100 200 600400 800 1000 1000 100 Frequency (M H z) C apacitance (pF) Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Continued from the preceding page. n Frequency Characteristics TZY2R200 R 200 Q 1000 100 200 1000600 800400 1000 100 Frequency (M H z) C apacitance (pF) TZY2K450 1000 100 1000 100 200 Q 400 600 800 C apacitance (pF) Frequency (M H z) K450 1000 100 1000 100 200 Q 400 600 800 C apacitance (pF) Frequency (M H z) K450 n Land Pattern Tolerance:±0.1 in m m 4.0 2.4 1.2 n Temperature Profile 230 183 100 20 sec. m ax.60 sec. to 120 sec. (Solder m elting zone) Preheating (in air) G radual C ooling (in air)Solderring Tem perature (°C ) n Screwdriver and Screwdriver Bit Screw driver for M anual Adjustm ent M urata Part N o. : K M D R 060 108 (in m m ) (in m m ) FU TABA TO O L M FG .C O .,LTD . D A-89 25 2.4 dia. 0.6 Please use the follow ing recom m ended screw driver. You can order this driver w ith below part num ber. Though you can also adjust the capacitance value by com m ercial products, please use one w hich has the sam e head size as the below driver. Screw driver Bit for Autom atic Adjustm ent M urata Part N o. : K M B T060 Bit shape ; M inus (0.56 ×0.25) Bit shape ; M inus (0.8×0.35)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 n Notice (Storage and operating condition) 1. D o not use the trim m er capacitor under atm osphere of R TV silicone rubber (R oom Tem perature Vulcanizing Silicone R ubber) except Acetone liberating silicone sealant. 2. Before using trim m er capacitor, please store under the condition of -10 to +40 C . and 30 to 85% R H . 3. D o not store in or near corrosive gasses. 4. U se w ithin 6 m onths of deliverly. 5. O pen the package just before using. 6. Prior to storing previously opened packages, the packaging should be heat-sealed. Avoid using rubber bands for repackage. 7. D o not store under direct sunlight. 8. D o not use the trim m er capacitor under the conditions listed below . (1) C orrosive gasses atm osphere (Ex. C hlorine gas, H ydrogen sulfide gas, Am m onia gas, Sulfuric acid gas, N itric oxie gas, etc.) (2) In liquid (Ex. w ater, oil, m edical liquid, organic solvent, etc.) (3) D usty / dirty atm osphere (4) D irect sunlight (5) Static voltage nor electric/m agnetic fields (6) D irect sea breeze (7) O ther variations of the above n Notice (Soldering) 1. Soldering (1) TZY2 series can be soldered by reflow soldering m ethod and soldering iron. D o not use flow soldering m ethod (dipping). (2) Standard soldering condition (a) R eflow soldering : R efer to the standard tem perature profile. (b) Soldering iron: > Tem perature of tip 260+-10 C . > Soldering tim e 3 sec. m ax. > D iam eter 1m m m ax. > W attage of iron 20W m ax. Before using other soldering conditions than those listed above, please consult w ith M urata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive tim e and/or excessive tem perature, the trim m er capacitor m ay deviate from the specified characteristics. (3) The am ount of solder is critical. (4) The thickness of solder paste should be printed from 120m icro m to 170m icro m and the dim ension of land pattern should be used M urata's standard land pattern at reflow soldering. Insufficient am ounts of solder can lead to insufficient soldering strength on PC B. Excessive am ounts of solder m ay cause the bridging betw een the term inals or the contact failure due to flux w icking up. (5) W hen using soldering iron, the diam eter of the string solder shall be less than 0.5m m . The string solder shall be applied to the low er part of the term inal only and do not apply flux except the term inals. Excessive am ounts of solder and/or applying solder to the upper part of the term inal m ay cause fixed m etal rotor or the contact failure due to flux invasion into the m ovable part and/or the contact point. The soldering iron should not com e in contact w ith the m onolithic stator of the trim m er capacitor. If such contact does occur, the trim m er capacitor m ay be dam aged. (6) O ur recom m endable chlorine content of solder is as follow s. (a) Solder paste : 0.2w t% m ax. (b) String solder : 0.5w t% m ax. (7) D o not use w ater-soluble flux (for w ater cleaning). To prevent the deterioration of trim m er capacitor characteristics, apply flux only to term inals. 2. M ounting (1) D o not apply excessive force (preferable 5.0N (R ef.; 500gf)m ax.), w hen the trim m er capacitor is m ounted on the PC B. (2) D o not w arp and/or bend PC B to prevent trim m er capacitor from breakage. (3) U se the suitable dim ension of the pick-up nozzle. (1.8m m external diam eter and 1.3m m bore diam eter.) 3. C leaning C an not be cleaned because of open construction. 4. O ther N ote the polarity of the trim m er capacitor to m inim ize influence by stray capacitance. (R efer to the dim ensions concerning the polarity.)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 n Notice (Handling) 1. U se suitable screw drivers that fit com fortably in driver slot. (1) R ecom m ended screw driver for m anual adjustm ent FU TABA : D A-89 (M urata P/N is KM D R 060) (2) R ecom m ended screw driver bit for autom atic adjustm ent M U R ATA : KM BT060 2. W hen adjusting w ith a screw driver, do not apply excessive force(preferable 1.0N (R ef;100gf) m ax.) to m inim ize capacitance drift. If excessive force applied to the screw driver slot, it m ay cause deform ation of the products. 3. D o not apply adhesive, lock paints, or any other substances to the trim m er capacitor to secure the rotor position. They m ay cause corrosion or electrical contact problem s. n Notice (Other) 1. Before using trim m er capacitor, please test after assem bly in your particular m ass production system . 2. W e have an application m anual for trim m er capacitor. (O nly for chip type) If you need it, please feel free to contact us.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Ceramic Trimmer Capacitors TZV2 Series n Features 1. Sm all size w ith external dim ensions of 2.3(W )x3.2(L)x1.45(H )m m . 2. U nique construction w ith no plastic m aterial provides superior soldering heat resistance to m aintain excellent characteristic perform ance after reflow soldering. 3. D esigned for autom atic placem ent in surface m ount applications. 4. Funnel shaped m etal case enable in-process autom atic adjustm ent. n Applications

C rystal oscillator •C rystal filters
H and radios •C ordless telephones
C ellular telephones •Tuner packs
Pagers •R em ote keyless entry system s
PH S •R adar detectors
W -LAN •C om pact radios
H eadphone stereos •D VD
Burglarproof devices 3.2–0.2 0.5 D epth 0.2 M arking(6pF) M arking(10pF) Tolerance:–0.1 in m m 1.0 Part Number Cmin. (pF) Cmax. (pF) TC Q Rated Voltage Withstanding Voltage Insulation R esistance : 10000M ohm m in. Torque : 1.0~10.0m N m O perating Tem perature R ange : -25~+85°C n Construction C over Spring W asher M etal R otor M onolithic Stator

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 n Temperature Characteristics TZV2Z2R5 200−10 −25 65 85−2 −10 −12 Z2R 5 (N P0–300 ppm /˚C ) Tem p.(˚C ) C ap.C hange(% ) TZV2Z060 200−10 −25 65 85 −10 −12 Z060 (N P0–300 ppm /˚C ) C ap.C hange(% ) Tem p.(˚C ) TZV2Z100 200−10 −25 65 85−2 −10 −12 Z100 (N P0–300 ppm /˚C ) C ap.C hange(% ) Tem p.(˚C ) TZV2R200 0−10−25 45 65 85 −10 −12 R 200 (N 750±500 ppm /˚C ) C ap.C hange(% ) Tem p.(˚C ) n Frequency Characteristics TZV2Z2R5 Z2R 5 1000 100 Q 500 1000 1500 2000 2500 3000 1000 100 Frequency (M H z) C apacitance (pF) TZV2Z060 Z060 Q 1000 100 500 1000 1500 2000 1000 100 Frequency (M H z) C apacitance (pF) Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Continued from the preceding page. n Frequency Characteristics TZV2Z100 Z100 Q 1000 100 200 600400 800 1000 1000 100 Frequency (M H z) C apacitance (pF) TZV2R200 R 200 Q 1000 100 200 1000600 800400 1000 100 Frequency (M H z) C apacitance (pF) n Land Pattern Tolerance:±0.1 in m m 4.0±1.0 2.4±0.1 1.2±0.1 n Temperature Profile 230 183 100 20 sec. m ax.60 sec. to 120 sec. (Solder m elting zone) Preheating (in air) G radual C ooling (in air)Solderring Tem perature (°C ) n Screwdriver and Screwdriver Bit Screw driver for M anual Adjustm ent M urata Part N o. : K M D R 020 Please use the follow ing recom m ended screw driver. You can order this driver w ith below part num ber. Though you can also adjust the capacitance value by com m ercial products, please use one w hich has the sam e head size as the below driver. (in m m ) (in m m ) VESSEL M FG . N O .9000 0.9×30 Screw driver Bit for Autom atic Adjustm ent M urata Part N o. : K M B T020 9000 0.9-30 125 Bit shape ; M inus (0.9×0.4) 0.6 2.4 dia. Bit shape ; M inus (0.9×0.4)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 n Notice (Storage and operating condition) 1. D o not use the trim m er capacitor under atm osphere of R TV silicone rubber (R oom Tem perature Vulcanizing Silicone R ubber) except Acetone liberating silicone sealant. 2. Before using trim m er capacitor, please store under the condition of -10 to +40 C . and 30 to 85% R H . 3. D o not store in or near corrosive gasses. 4. U se w ithin 6 m onths of deliverly. 5. O pen the package just before using. 6. Prior to storing previously opened packages, the packaging should be heat-sealed. Avoid using rubber bands for repackage. 7. D o not store under direct sunlight. 8. D o not use the trim m er capacitor under the conditions listed below . (1) C orrosive gasses atm osphere (Ex. C hlorine gas, H ydrogen sulfide gas, Am m onia gas, Sulfuric acid gas, N itric oxie gas, etc.) (2) In liquid (Ex. w ater, oil, m edical liquid, organic solvent, etc.) (3) D usty / dirty atm osphere (4) D irect sunlight (5) Static voltage nor electric/m agnetic fields (6) D irect sea breeze (7) O ther variations of the above n Notice (Soldering) 1. Soldering (1) TZV2 series can be soldered by reflow soldering m ethod and soldering iron. D o not use flow soldering m ethod (dipping). (2) Standard soldering condition (a) R eflow soldering : R efer to the standard tem perature profile. (b) Soldering iron: >Tem perature of tip 260+-10 C . >Soldering tim e 3 sec. m ax. >D iam eter 1m m m ax. >W attage of iron 20W m ax. Before using other soldering conditions than those listed above, please consult w ith M urata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive tim e and/or excessive tem perature, the trim m er capacitor m ay deviate from the specified characteristics. (3) The am ount of solder is critical. (4) The thickness of solder paste should be printed from 120m icro m to 170m icro m and the dim ension of land pattern should be used M urata's standard land pattern at reflow soldering. Insufficient am ounts of solder can lead to insufficient soldering strength on PC B. Excessive am ounts of solder m ay cause the bridging betw een the term inals or the contact failure due to flux w icking up. (5) W hen using soldering iron, the diam eter of the string solder shall be less than 0.5m m . The string solder shall be applied to the low er part of the term inal only and do not apply flux except the term inals. Excessive am ounts of solder and/or applying solder to the upper part of the term inal m ay cause fixed m etal rotor or the contact failure due to flux invasion into the m ovable part and/or the contact point. The soldering iron should not com e in contact w ith the m onolithic stator of the trim m er capacitor. If such contact does occur, the trim m er capacitor m ay be dam aged. (6) O ur recom m endable chlorine content of solder is as follow s. (a) Solder paste : 0.2w t% m ax. (b) String solder : 0.5w t% m ax. (7) D o not use w ater-soluble flux (for w ater cleaning). To prevent the deterioration of trim m er capacitor characteristics, apply flux only to term inals. 2. M ounting (1) D o not apply excessive force (preferable 5.0N (R ef.; 500gf)m ax.), w hen the trim m er capacitor is m ounted on the PC B. (2) D o not w arp and/or bend PC B to prevent trim m er capacitor from breakage. (3) U se the suitable dim ension of the pick-up nozzle. (1.8m m external diam eter and 1.3m m bore diam eter.) 3. C leaning C an not be cleaned because of open construction. 4. O ther N ote the polarity of the trim m er capacitor to m inim ize influence by stray capacitance. (R efer to the dim ensions concerning the polarity.)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 n Notice (Handling) 1. U se suitable screw drivers that fit com fortably in driver slot. (1) R ecom m ended screw driver for m anual adjustm ent VESSEL : N o.9000-0.9x30 (M urata P/N : KM D R 020) (2) R ecom m ended screw driver bit for autom atic adjustm ent M U R ATA : KM BT020 2. W hen adjusting w ith a screw driver, do not apply excessive force(preferable 1.0N (R ef;100gf) m ax.) to m inim ize capacitance drift. If excessive force applied to the screw driver slot, it m ay cause deform ation of the products. 3. D o not apply adhesive, lock paints, or any other substances to the trim m er capacitor to secure the rotor position. They m ay cause corrosion or electrical contact problem s. n Notice (Other) 1. Before using trim m er capacitor, please test after assem bly in your particular m ass production system . 2. W e have an application m anual for trim m er capacitor. (O nly for chip type) If you need it, please feel free to contact us.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Ceramic Trimmer Capacitors TZC 3 Series n Features 1. Sm all size w ith external dim ension of 3.2(W )x4.5(L)x1.6(H )m m (C ross slot type : 1.7(H )m m ) 2. C olor coded stator perm its easy identification of capacitance and reduces m ounting errors. 3. C an be adjusted w ith conventional adjustm ent tools having a thickness of 0.5m m . 4. Available for cross slot type to provide better adjustability. 5. Providing m echanism to prevent air leak offers better m ountability w ith autom atic m ounter. (C ross slot type) 6. D esigned for autom atic placem ent in surface m ount applications. 7. H eat resistant resin w ithstands reflow soldering tem peratures. n Applications

C om pact radios •H eadphone stereos
Pagers •Portable radio equipm ents
H ybrid IC s •C ellular telephones
C ordless telephones •R em ote keyless entry system s 0.5 2.5 dia. 4.5 0.75 3.2 0.8 0.35 1.6 4.5 0.6 0.6 0.8 Tolerance:–0.1 in m m Standard Type ø2.5 4.5 0.6 0.5–0.05 D epth 0.4–0.05 1.7 0.6 0.75 0.8 3.2 Tolerance:–0.1 in m m Cross Slot Type Part Number Cmin. (pF) Cmax. (pF) TC Q Rated Voltage Withstanding Voltage Stator/Case Color Insulation R esistance : 10000M ohm m in. Torque : 1.5~10.0m N m O perating Tem perature R ange : -25~+85°C The last three digits show the slot type. 110:standard(m inus) type, 310:plus type. n Construction Standard Type C enter axis R otor spring term inal C eram ic plate Stator (O ne m olded injection w ith stator term inal) Stator term inal Cross Slot Type C enter axis R otor spring term inal C eram ic plate Stator (O ne m olded injection w ith stator term inal) Stator term inal Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Continued from the preceding page. n Temperature Characteristics TZC3Z030 200−10−25 45 65 −10 −12 Tem p.(˚C ) Z030 (N P0±300 ppm /˚C ) C ap.C hange (% ) TZC3Z060 200−10−25 45 65 85−2 −10 −12 Tem p.(˚C ) Z060 (N P0±300 ppm /˚C ) C ap.C hange(% ) TZC3R100 0−10−25 45 65 85 −10 −12 Tem p.(˚C ) R 100 (N 750±300 ppm /˚C ) C ap.C hange(% ) TZC3P200 0–10–25 45 65 85 –10 –12 Tem p.(°C )20 P200 (N 1200–500ppm /°C ) C ap.C hange (% ) n Frequency Characteristics TZC3Z030 Z030 1000 100Q 100 500 1000 1500 Frequency (M H z) 2000 1000 100 C apacitance (pF) TZC3Z060 Z060 Q 1000 100 100 500 200015001000 Frequency (M H z) 1000 100 C apacitance (pF) Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Continued from the preceding page. n Frequency Characteristics TZC3R100 R 100 Q 1000 100 200 600400 800 1000 Frequency (M H z) 1000 100 C apacitance (pF) TZC3P200 P200 Q 1000 100 200 1000600 800400 Frequency(M H z) 1000 100 C apacitance (pF) n Land Pattern Standard Type 5.0 −0.5 3.3±0.1 1.0±0.1 Tolerance:–0.1 in m m Cross Slot Type 5.0 −0.5 3.3±0.1 1.0±0.1 Tolerance:–0.1 in m m n Temperature Profile 230 183 100 20 sec. m ax.60 sec. to 120 sec. (Solder m elting zone) Preheating (in air) G radual C ooling (in air)Solderring Tem perature (°C ) Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Continued from the preceding page. n Standard Type Screwdriver and Screwdirver Bit Screw driver for M anual Adjustm ent M urata Part N o. : K M D R 010 Please use the follow ing recom m ended screw driver. You can order this driver w ith below part num ber. Though you can also adjust the capacitance value by com m ercial products, please use one w hich has the sam e head size as the below driver. (in m m ) (in m m ) Screw driver Bit for Autom atic Adjustm ent M urata Part N o. : K M B T010 2.2 dia. Bit shape ; M inus (2.2×0.4) 122 Bit shape ; M inus (2.2×0.4) n Cross Slot Type Screwdriver and Screwdirver Bit Screw driver for M anual Adjustm ent M urata Part N o. : K M D R 040 Please use the follow ing recom m ended screw driver. You can order this driver w ith below part num ber. Though you can also adjust the capacitance value by com m ercial products, please use one w hich has the sam e head size as the below driver. (in m m ) (in m m ) TO R AY IN D U STR IES,IN C . SA-1825 TO R AY IN D U STR IES,IN C . JB-1825 Screw driver Bit for Autom atic Adjustm ent M urata Part N o. : K M B T040 120 Bit shape ; M inus (1.8×0.45) 1.8 dia. Bit shape ; M inus (1.8×0.45) n Notice (Storage and operating condition) 1. D o not use the trim m er capacitor under atm osphere of R TV silicone rubber (R oom Tem perature Vulcanizing Silicone R ubber) except Acetone liberating silicone sealant. 2. Before using trim m er capacitor, please store under the condition of -10 to +40 C . and 30 to 85% R H . 3. D o not store in or near corrosive gasses. 4. U se w ithin 6 m onths of deliverly. 5. O pen the package just before using. 6. Prior to storing previously opened packages, the packaging should be heat-sealed. Avoid using rubber bands for repackage. 7. D o not store under direct sunlight. 8. D o not use the trim m er capacitor under the conditions listed below . (1) C orrosive gasses atm osphere (Ex. C hlorine gas, H ydrogen sulfide gas, Am m onia gas, Sulfuric acid gas, N itric oxie gas, etc.) (2) In liquid (Ex. w ater, oil, m edical liquid, organic solvent, etc.) (3) D usty / dirty atm osphere (4) D irect sunlight (5) Static voltage nor electric/m agnetic fields (6) D irect sea breeze (7) O ther variations of the above

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 n Notice (Soldering) 1. Soldering (1) TZC 3 series can be soldered by reflow soldering m ethod and soldering iron. D o not use flow soldering m ethod (dipping). (2) Standard soldering condition (a) R eflow soldering : R efer to the standard tem perature profile. (b) Soldering iron: > Tem perature of tip 260+-10 C . > Soldering tim e 3 sec. m ax. > D iam eter 1m m m ax. > W attage of iron 20W m ax. Before using other soldering conditions than those listed above, please consult w ith M urata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive tim e and/or excessive tem perature, the trim m er capacitor m ay deviate from the specified characteristics. (3) The am ount of solder is critical. (4) The thickness of solder paste should be printed from 150m icro m to 200m icro m and the dim ension of land pattern should be used M urata's standard land pattern at reflow soldering. Insufficient am ounts of solder can lead to insufficient soldering strength on PC B. Excessive am ounts of solder m ay cause the bridging betw een the term inals or the contact failure due to flux w icking up. (5) W hen using soldering iron, the diam eter of the string solder shall be less than 0.5m m . The string solder shall be applied to the low er part of the term inal only and do not apply flux except the term inals. Excessive am ounts of solder and/or applying solder to the upper part of the term inal m ay cause fixed m etal rotor or the contact failure due to flux invasion into the m ovable part and/or the contact point. The soldering iron should not com e in contact w ith the stator of the trim m er capacitor. If such contact does occur, the trim m er capacitor m ay be dam aged. (6) O ur recom m endable chlorine content of solder is as follow s. (a) Solder paste : 0.2w t% m ax. (b) String solder : 0.5w t% m ax. (7) D o not use w ater-soluble flux (for w ater cleaning). To prevent the deterioration of trim m er capacitor characteristics, apply flux only to term inals. (8) W hen soldering the TZC 3 series, the solder should not flow into the staking part of the substrate. If such flow does occur, driver slot rotation w ill be dam aged. 2. M ounting (1) D o not apply excessive force (preferable 5.0N (R ef.; 500gf)m ax.), w hen the trim m er capacitor is m ounted on the PC B. (2) D o not w arp and/or bend PC B to prevent trim m er capacitor from breakage. (3) U se the suitable dim ension of the pick-up nozzle. (2.5m m external diam eter and 1.5m m bore diam eter.) 3. C leaning C an not be cleaned because of open construction. 4. O ther N ote the polarity of the trim m er capacitor to m inim ize influence by stray capacitance. (R efer to the dim ensions concerning the polarity.) n Notice (Handling) 1. U se suitable screw drivers that fit com fortably in driver slot. (1) R ecom m ended screw driver for m anual adjustm ent Standard type --> M U R ATA : KM D R 010 C ross slot type --> TO R AY : SA-1825 (M urata P/N is KM D R 040) (2) R ecom m ended screw driver bit for autom atic adjustm ent Standard type --> M U R ATA : KM BT010 C ross slot type --> TO R AY : JB-1825 (M urata P/N is KM BT040) 2. W hen adjusting w ith a screw driver, do not apply excessive force(preferable 1.0N (R ef;100gf) m ax.) to m inim ize capacitance drift. If excessive force applied to the screw driver slot, it m ay cause deform ation of the products. 3. D o not apply adhesive, lock paints, or any other substances to the trim m er capacitor to secure the rotor position. They m ay cause corrosion or electrical contact problem s. n Notice (Other) 1. Before using trim m er capacitor, please test after assem bly in your particular m ass production system . 2. W e have an application m anual for trim m er capacitor. (O nly for chip type) If you need it, please feel free to contact us.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Ceramic Trimmer Capacitors TZB 4 Series n Features 1. M iniature rectangular shape : 4.0(W )x4.5(L)x3.0(H )m m . 2. C olor coded case facilitates identification of capacitance range. 3. D esigned for autom atic placem ent in surface m ount applications. 4. D esigned to w ithstand flux baths and solder baths. (w ith cover film type) 5. C an be tem porarily attached to PC B w ith adhesives. (Term inal style A and B) 6. C an be reflow and flow (w ith cover film type) soldering m ethod. 7. Stable characteristics over a w ide frequency range. (R esonant frequency : 1000 M H z m in. / 6pF) n Applications

C ar audio system s •C ordless telephones
H ybrid IC s •Pagers
R em ote keyless entry system s
Tuner packs •Surveillance cam eras
D VD •Burglarproof devices 2.7–0.3 2.4–0.1 4.0–0.2 4.5–0.2 5.0 1.2–0.1 3.0–0.2 Tolerance : –0.5 in m m A Type 2.4–0.1 4.0–0.2 4.5–0.2 7.0 1.2–0.1 3.0–0.2 Tolerance : –0.5 in m m B Type 5.0 2.4–0.1 4.0–0.2 4.5–0.2 6.2 0.8–0.1 3.0–0.2 Tolerance : –0.5 in m m 2.5 C Type 5.0 2.4–0.1 4.0–0.2 4.5–0.2 6.2 0.8–0.1 2.5–0.2 Tolerance : –0.5 in m m 2.0–0.2 3.0–0.2 1.0 3.5–0.2 D Type 0.6–0.1 D epth 0.5 4.8 2.4–0.1 4.0–0.2 4.5–0.2 4.5 4.0–0.2 3.0–0.2 Tolerance : –0.5 in m m 7.0 0.8–0.1 E Type

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Part Number Cmin. (pF) Cmax. (pF) TC Q Rated Voltage Withstanding Voltage Stator/Case Color TZB 4Z030pp10 1.4 max. 3.0 +50/-0% NP0–200ppm/°C 300min. at 1MHz, Cmax 100Vdc 220Vdc Brown TZB 4R 200pp10 4.5 max. 20.0 +50/-0% N750–300ppm/°C 500min. at 1MHz, Cmax 100Vdc 220Vdc Red TZB 4P300pp10 6.5 max. 30.0 +50/-0% N1200–500ppm/°C 300min. at 1MHz, Cmax 100Vdc 220Vdc Green TZB 4P400pp10 8.5 max. 40.0 +50/-0% N1200–500ppm/°C 300min. at 1MHz, Cmax 100Vdc 220Vdc Yellow TZB 4R 500pp10 7.0 max. 50.0 +100/-0% N750–300ppm/°C 300min. at 1MHz, Cmax 50Vdc 110Vdc Black+Marking Insulation R esistance : 10000M ohm m in. Torque : 1.5~10.0m N m O perating Tem perature R ange : -25~+85°C Tw o blank colum ns are term inal type codes and filled w ith cover film codes (A: not provided, B: provided). n Construction Plastic C ase R otor Spring M etal R otor C eram ic Plate Stator Term inal C over Film (C over film type) R otor Term inal n Land Pattern/Mounting Holes A Type 1.6±0.1 7.0 +0 - 0.5 2.4±0.2 (in m m ) B Type 4.0±0.2 1.6±0.1 8.0 +0 - 0.5 (in m m ) C Type 5.0±0.5 (in m m ) D Type 2.8±0.2 dia. 0.8±0.1 5.0±0.5 (in m m ) 1.0±0.1 Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Continued from the preceding page. n Land Pattern/Mounting Holes E Type 8.0 +0 - 0.5 4.2±0.2 1.2±0.1 3.2±0.2 dia. (in m m ) n Temperature Characteristics +10 +20 0–25 +55 +85 –10 Z060 (N P0–200ppm /°C ) Tem p. (°C ) C ap.C hange (% ) +10 +20 0–25 +55 +85 –10 Z100 (N P0–300ppm /°C ) C ap.C hange (% ) Tem p. (°C ) +10 +20 0–25 +55 +85 –10 R 200 (N 750–300ppm /°C ) C ap.C hange (% ) Tem p. (°C ) +10 +20 0–25 +55 +85 –10 R 500 (N 750–200ppm /°C ) C ap.C hange (% ) Tem p.(°C ) Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Continued from the preceding page. n Frequency Characteristics Z060 1000 100 Q 1000 100 800700600500400300200100 900 1000 Frequency (M H z) C apacitance (pF) Z100 Q 1000 100 800700600500400300200100 900 1000 Frequency (M H z) 1000 100 C apacitance (pF) R 200 Q 1000 100 200100 400300 500 600 Frequency (M H z) 1000 100 C apacitance (pF) R 500 Q 1000 100 100 500300 400200 Frequency (M H z) 1000 100 C apacitance (pF) n Temperature Profile Reflow 230 183 100 20 sec. m ax.60 sec. to 120 sec. (Solder m elting zone) Preheating (in air) G radual C ooling (in air)Solderring Tem perature (°C ) Flow 200 250 100 Preheating (in air) G radual C ooling (in air)Solderring Tem perature (°C ) 5 sec. m ax.60 sec. to 120 sec. Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Continued from the preceding page. n Screwdriver and Screwdriver Bit Screw driver for M anual Adjustm ent M urata Part N o. : K M D R 010 Please use the follow ing recom m ended screw driver. You can order this driver w ith below part num ber. Though you can also adjust the capacitance value by com m ercial products, please use one w hich has the sam e head size as the below driver. (in m m ) (in m m ) Screw driver Bit for Autom atic Adjustm ent M urata Part N o. : K M B T010 2.2 dia. Bit shape ; M inus (2.2×0.4) 122 Bit shape ; M inus (2.2×0.4) n Notice (Storage and operating condition) 1. D o not use the trim m er capacitor under atm osphere of R TV silicone rubber (R oom Tem perature Vulcanizing Silicone R ubber) except Acetone liberating silicone sealant. 2. Before using trim m er capacitor, please store under the condition of -10 to +40 C . and 30 to 85% R H . 3. D o not store in or near corrosive gasses. 4. U se w ithin 6 m onths of deliverly. 5. O pen the package just before using. 6. Prior to storing previously opened packages, the packaging should be heat-sealed. Avoid using rubber bands for repackage. 7. D o not store under direct sunlight. 8. D o not use the trim m er capacitor under the conditions listed below . (1) C orrosive gasses atm osphere (Ex. C hlorine gas, H ydrogen sulfide gas, Am m onia gas, Sulfuric acid gas, N itric oxie gas, etc.) (2) In liquid (Ex. w ater, oil, m edical liquid, organic solvent, etc.) (3) D usty / dirty atm osphere (4) D irect sunlight (5) Static voltage nor electric/m agnetic fields (6) D irect sea breeze (7) O ther variations of the above n Notice (Soldering) 1. Soldering (1) C an be soldered by reflow soldering m ethod, flow soldering m ethod, and soldering iron. (2) Standard soldering condition (a) R eflow soldering : R efer to the standard tem perature profile. *Available for term inal shape A, B, and E. (b) Flow soldering : R efer to the standard tem perature profile. > Im m erse the body in solder bath - Available for cover film type > O nly im m erse the term inal in solder bath - Availabe for term inal shape C and D . (c) Soldering iron: > Tem perature of tip 260+-10 C . > Soldering tim e 3 sec. m ax. > D iam eter 3m m m ax. > W attage of iron 30W m ax. Before using other soldering conditions than those listed above, please consult w ith M urata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive tim e and/or excessive tem perature, the trim m er capacitor m ay deviate from the specified characteristics. (3) The am ount of solder is critical. (4) The thickness of solder paste should be printed from 200m icro m to 250m icro m and the dim ension of land pattern should be used M urata's standard land pattern at reflow soldering. Insufficient am ounts of solder can lead to insufficient soldering strength on PC B. Excessive am ounts of solder m ay cause the bridging betw een the term inals or the contact failure due to flux w icking up. (5) W hen using soldering iron, the string solder shall be applied to the low er part of the term inal only and do not apply flux except the term inals. Excessive am ounts of solder and/or applying solder to the upper part of the term inal m ay cause fixed rotor or the contact failure due to flux invasion into the m ovable part and/or the contact point. The soldering iron should not com e in contact w ith the plastic case of the trim m er capacitor. If such contact does occur, the trim m er capacitor m ay be dam aged. (6) O ur recom m endable chlorine content of solder is Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Continued from the preceding page. as follow s. (a) Solder paste : 0.2w t% m ax. (b) String solder : 0.5w t% m ax. (7) D o not use w ater-soluble flux (for w ater cleaning). To prevent the deterioration of trim m er capacitor characteristics, apply flux only to term inals. 2. M ounting (1) D o not apply excessive force (preferable 5.0N (R ef.; 500gf)m ax.), w hen the trim m er capacitor is m ounted on the PC B. (2) D o not w arp and/or bend PC B to prevent trim m er capacitor from breakage. (3) U se the suitable PC B holes w hich are the sam e pitch as the term inal of the trim m er capacitor. If it w ould not fit w ith the term inal, the excessive stress w ould be applied to the term inal and the trim m er capacitor m ay deviate from the specified characteristics.(Term inal shape C and D .) (4) D o not apply bending stress m ore than 10.0N (R ef.; 1kgf) after the trim m er capacitor has been m ounted on the PC B.(Term inal shape C and D .) (5) M ount trim m er capacitor in contact w ith PC B. (Term inal shape C and D .) (6) In case of bending the term inals, do not apply excessive force to the body of the product and prevent the term inal fixing part from dam aging. (7) U se the suitable dim ension of the pick-up nozzle. > W ithout cover film type - External dim ensions of 4.5x4.0m m and 2.5m m bore diam eter. > W ith cover film type - 4.0m m external diam eter and 2.0m m bore diam eter. 3. C leaning [w ith cover film type] (1) Isopropyl alcohol and Ethyl alcohol are available m aterial for cleaning. W ater group m aterial like Pinealpha, C leanthru can not be used. For other m aterials, please consult w ith M urata factory representative prior to using. (2) The total cleaning tim e by dipping, vapor and ultra-sonic m ethod shall be less than 2 m inutes. For ultra-sonic cleaning, the available condition is as follow s. > C leaning tim e : 1 m in. m ax. > Pow er : 20W /liter m ax. > Frequency : 20 - 60kH z > Tem perature : Am bient tem perature D ue to the ultra-sonic cleaning equipm ent peculiar self resonance point and the cleaning com patibility usually depends on the jig construction and/or the cleaning condition such as the depth of im m ersion, please check the cleaning equipm ent to determ ine the suitable conditions. If the trim m er capacitor is cleaned by other conditions, the trim m er capacitor m ay deviate from the specified characteristics. 4. O ther N ote the polarity of the trim m er capacitor to m inim ize influence by stray capacitance. (R efer to the dim ensions concerning the polarity.) n Notice (Handling) 1. U se suitable screw drivers that fit com fortably in driver slot. (1) R ecom m ended screw driver for m anual adjustm ent M U R ATA : KM D R 010 (2) R ecom m ended screw driver bit for autom atic adjustm ent M U R ATA : KM BT010 2. W hen adjusting w ith a screw driver, do not apply excessive force(preferable 1.0N (R ef;100gf) m ax.) to m inim ize capacitance drift. If excessive force applied to the screw driver slot, it m ay cause deform ation of the products. 3. D o not apply adhesive, lock paints, or any other substances to the trim m er capacitor to secure the rotor position. They m ay cause corrosion or electrical contact problem s. 4. D o not break the cover film before the com pletion of PC B m ounting, soldering, and cleaning. 5. D o not clean the trim m er capacitor after the cover film has been broken. 6. To break the cover film , first turn the screw driver m ore than 45deg., the set the capacitance value. (O nly inserting the screw driver cannot break the cover film .) n Notice (Other) 1. Before using trim m er capacitor, please test after assem bly in your particular m ass production system . 2. W e have an application m anual for trim m er capacitor. (O nly for chip type) If you need it, please feel free to contact us.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Ceramic Trimmer Capacitors TZ03 Series n Features 1. C olor coded case facilitates identification of capacitance range. 2. Sealed construction prevents the penetration of flux and dust. 3. Available in three adjustm ent styles : Top/R ear/ Side. 4. Available in both tape and reel and m agazine packaging for autom atic insertion. 5. +(C ross-shaped) slot enables autom atic adjustm ent. n Applications

C ar audio system s •C ar clocks
Stereos •R adio cassette tape recorders
C ordless telephones •Video gam es
C om pact radio equipm ents
R em ote keyless entry system s
Burglarproof devices Tolerance:–0.5 in m m 6 dia. 2.5–0.2 dia. 0.5–0.2 D epth 0.5 m in. 6.6 3.1 3.5 3.34.8 B Type 2.5–0.2 dia. 0.5–0.2 D epth 0.5 m in . 6 dia. 4.83.5 1.0–0.1 0.2–0.050.25–0.05 1.0–0.1 Tolerance:–0.5 in m m E Type 2.5–0.2 dia. 0.5–0.2 D epth 0.5 m in. 6 dia. Tolerance:–0.5 in m m 1.0–0.1 1.0–0.1 6.6 0.2–0.05 0.25–0.05 4.83.3 F Type 2.5–0.2 dia. 0.5–0.2 D epth 0.5 m in. 6.0 dia. 6.0 1.2–0.1 7.8 6.4 3.0 3.4 1.0–0.1 Tolerance:–0.5 in m m 0.25– 0.05 0.2–0.05 4.8 3.0 4.0 N Type 0.5±0.2 D epth 0.5 m in. 2.5±0.2 dia. 2.5±0.3 6.0 dia. 6.0 4.8 1.3 6.1 Tolerance:±0.5 in m m T Type 1.4 3 7.2 3.2 2.5 3.7 0.3 1.2 7.5 4.5 3.5 Trim m er C ap. Body Socket Solder 0.5–0.2 D epth 0.5 m in. 2.5–0.2 dia. Tolerance:–0.5 in m m 1.21.2 Y Type

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Part Number Cmin. (pF) Cmax. (pF) TC Q Rated Voltage Withstanding Voltage Stator/Case Color Insulation R esistance : 10000M ohm m in. Torque : 2.0~15.0m N m O perating Tem perature R ange : -25~+85°C A blank colum n is filled w ith term inal type codes. n Construction n Mounting Holes B Type 6.3 1.3±0.1 3 dia. 1±0.1 3 3.3 Tolerance:–0.5 in m m E Type 1.2±0.1 dia. 1.2±0.1 dia. Tolerance:–0.5 in m m Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Continued from the preceding page. n Mounting Holes F Type 1.3±0.1 dia. 1.3±0.1 dia. Tolerance:–0.5 in m m N Type 1.3±0.1 3 dia. 1±0.1 3 3.3 Tolerance:–0.5 in m m T Type 1.0±0.1 dia. 1.0±0.1 dia. 5.0±0.2 (in m m ) Y Type 1.4±0.1 dia. 1.4±0.1 dia. Tolerance:–0.5 in m m n Temperature Characteristics –25 Tem p. (°C ) C ap.C hange (% ) Z070 (N P0–200ppm /°C ) –25 8555 Tem p. (°C ) C ap.C hange (% ) T110 (N 450–300ppm /°C ) –25 8555 Tem p. (°C )00 C ap.C hange (% ) R 200 (N 750–300ppm /°C ) –25 8555 Tem p. (°C )00 –10 C ap.C hange (% ) P600 (N 1200–500ppm /°C ) Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Continued from the preceding page. n Temperature Characteristics –25 Tem p. (°C )00 –10 C ap.C hange (% ) Z500 (N P0–300ppm /°C ) –25 8555 Tem p. (°C )00 –10 C ap.C hange (% ) R 121 (N 750–300ppm /°C ) n Frequency Characteristics 1000 100 1001 200 300 400 500 600 700 800 900 1000 1000 100 Q Frequency(M H z) C apacitance(pF) Z070 1000 100 1001 200 300 400 500 600 700 800 900 1000 1000 100 Q Frequency (M H z) C apacitance (pF) T110 1000 100 1001 200 300 400 500 1000 100 Q Frequency (M H z) C apacitance (pF) R 200 1000 100 1001 200 300 400 500 1000 100 Q Frequency (M H z) C apacitance (pF) P450 Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Continued from the preceding page. n Frequency Characteristics 1000 100 1001 200 300 400 500 1000 100 Q Frequency (M H z) C apacitance (pF) P600 1000 100 1001 200 300 400 500 1000 100 Q Frequency (M H z) C apacitance (pF) R 900 n Temperature Profile Flow 200 250 100 Preheating (in air) G radual C ooling (in air)Solderring Tem perature (°C ) 5 sec. m ax.60 sec. to 120 sec. n Screwdriver and Screwdriver Bit Screw driver for M anual Adjustm ent M urata Part N o. : K M D R 010 Please use the follow ing recom m ended screw driver. You can order this driver w ith below part num ber. Though you can also adjust the capacitance value by com m ercial products, please use one w hich has the sam e head size as the below driver. (in m m ) (in m m ) Screw driver Bit for Autom atic Adjustm ent M urata Part N o. : K M B T010 2.2 dia. Bit shape ; M inus (2.2×0.4) 122 Bit shape ; M inus (2.2×0.4)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 n Notice (Storage and operating condition) 1. D o not use the trim m er capacitor under atm osphere of R TV silicone rubber (R oom Tem perature Vulcanizing Silicone R ubber) except Acetone liberating silicone sealant. 2. Before using trim m er capacitor, please store under the condition of -10 to +40 C . and 30 to 85% R H . 3. D o not store in or near corrosive gasses. 4. U se w ithin 6 m onths of deliverly. 5. O pen the package just before using. 6. Prior to storing previously opened packages, the packaging should be heat-sealed. Avoid using rubber bands for repackage. 7. D o not store under direct sunlight. 8. D o not use the trim m er capacitor under the conditions listed below . (1) C orrosive gasses atm osphere (Ex. C hlorine gas, H ydrogen sulfide gas, Am m onia gas, Sulfuric acid gas, N itric oxie gas, etc.) (2) In liquid (Ex. w ater, oil, m edical liquid, organic solvent, etc.) (3) D usty / dirty atm osphere (4) D irect sunlight (5) Static voltage nor electric/m agnetic fields (6) D irect sea breeze (7) O ther variations of the above n Notice (Soldering) 1. Soldering (1) TZ03 series can be soldered by flow soldering m ethod and soldering iron. D o not use reflow soldering m ethod. (2) Standard soldering condition (a) Flow soldering : R efer to the standard tem perature profile. (b) Soldering iron : > Tem perature of tip 260+-10 C . > Soldering tim e 3 sec. m ax. > D iam eter 3m m m ax. > W attage of iron 30W m ax. Before using other soldering conditions than those listed above, please consult w ith M urata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive tim e and/or excessive tem perature, the trim m er capacitor m ay deviate from the specified characteristics. (3) The dim ension of m ounting hole should be used M urata's standard m ounting hole at flow soldering. The am ount of solder is critical. Insufficient am ounts of solder can lead to insufficient soldering strength on PC B. Excessive am ounts of solder m ay cause the bridging betw een the term inals or the contact failure due to flux w icking up. (4) W hen using soldering iron, the string solder shall be applied to the low er part of the term inal only and do not apply flux except the term inals. Excessive am ounts of solder and/or applying solder to the upper part of the term inal m ay cause fixed rotor or the contact failure due to flux invasion into the m ovable part and/or the contact point. The soldering iron should not com e in contact w ith the plastic case of the trim m er capacitor. If such contact does occur, the trim m er capacitor m ay be dam aged. (5) O ur recom m endable chlorine content of string solder is 0.5w t% m ax. (6) D o not use w ater-soluble flux (for w ater cleaning). To prevent the deterioration of trim m er capacitor characteristics, apply flux only to term inals. 2. M ounting (1) D o not apply excessive force (preferable 5.0N (R ef.; 500gf)m ax.), w hen the trim m er capacitor is m ounted on the PC B. (2) U se the suitable PC B holes w hich are the sam e pitch as the term inal of the trim m er capacitor. If it w ould not fit w ith the term inal, the excessive stress w ould be applied to the term inal and the trim m er capacitor m ay deviate from the specified characteristics. (3) D o not apply bending stress m ore than 10.0N (R ef.; 1kgf) after the trim m er capacitor has been m ounted on the PC B. (4) M ount trim m er capacitor in contact w ith PC B. (5) In case of bending the term inals, do not apply excessive force to the body of the product and prevent the term inal fixing part from dam aging. 3. C leaning [w ith cover film type] (1) Isopropyl alcohol and Ethyl alcohol are available m aterial for cleaning. W ater group m aterial like Pinealpha, C leanthru can not be used. For other m aterials, please consult w ith M urata factory representative prior to using. (2) The total cleaning tim e by dipping, vapor and ultra-sonic m ethod shall be less than 2 m inutes. For ultra-sonic cleaning, the available condition is as follow s. > C leaning tim e : 30 sec. m ax. > Pow er : 20W /liter m ax. > Frequency : 20 - 60kH z > Tem perature : Am bient tem perature D ue to the ultra-sonic cleaning equipm ent peculiar self resonance point and the cleaning com patibility usually depends on the jig construction and/or the cleaning condition such as the depth of im m ersion, please check the cleaning equipm ent to determ ine the suitable conditions. If the trim m er capacitor is cleaned by other conditions, the trim m er capacitor m ay deviate from the specified characteristics. Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Continued from the preceding page. 4. O ther N ote the polarity of the trim m er capacitor to m inim ize influence by stray capacitance. (R efer to the dim ensions concerning the polarity.) n Notice (Handling) 1. U se suitable screw drivers that fit com fortably in driver slot. (1) R ecom m ended screw driver for m anual adjustm ent M U R ATA : KM D R 010 (2) R ecom m ended screw driver bit for autom atic adjustm ent M U R ATA : KM BT010 2. W hen adjusting w ith a screw driver, do not apply excessive force(preferable 1.0N (R ef;100gf) m ax.) to m inim ize capacitance drift. If excessive force applied to the screw driver slot, it m ay cause deform ation of the products. 3. D o not apply adhesive, lock paints, or any other substances to the trim m er capacitor to secure the rotor position. They m ay cause corrosion or electrical contact problem s. n Notice (Other) Before using trim m er capacitor, please test after assem bly in your particular m ass production system .

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Packaging n Minimum Quantity Part Number TZR 1 TZS2 TZY2 TZV2 TZC 3 TZB 4 TZ03 3000 3000 2000 2000 1000 500 φ180mm Reel 10000 10000 10000 8000 4000 2500 φ330mm Reel 1000 Ammo Pack Magazine 500 500 500 500 500 500 1000∗ Bulk Minimum Quantity (pcs.) ∗D epending on term inal shape, som e products are supplied on the 500pcs./bulk basis. n Dimension of Tape TZR1R Series 4.0–0.1 8.0–0.3 2.0–0.1 4.0–0.1 1.5 D ia.+0.1 2.0–0.2 1.75–0.1 3.5–0.1 1.8–0.2 1.05–0.2 0.25–0.1 (in m m ) TZS02 Series 4.0–0.1 8.0–0.3 2.0–0.1 4.0–0.1 1.5 -0 dia. +0.1 3.0–0.2 1.75–0.1 3.5–0.1 2.5–0.2 1.25–0.2 0.25–0.1 (in m m ) TZY2/TZV2 Series 1.5+0.1 − 0 dia. 2.0 4.0 A A 2.7±0.2 4.0 3.5 0.25 t 8.0±0.2 1.75 A-Across section t=TZY2 (TZVY2) : 1.6±0.2 TZV2 (TZV02) : 1.9±0.2 3.6±0.2 Tolerance:–0.1 in m m TZC3 Series 1.5 +0.1 − 0 dia. 4.9±0.2 A 5.5 1.75 12±0.3 0.3 2.0±0.2 A A-Across section Tolerance:–0.1 in m m 3.6±0.2 TZB4 Series 1.5 +0.1 − 0 dia. 8.0 2.0 4 .0 A A 1.8 4.3 3.55±0.2 4.8 7.5 5.5 12.0±0.3 0.3±0.1 A-Across section D irection of feed Tolerance:–0.1 in m m 1.75

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Packaging n Dimension of dia. 180mm Reel TZR1/TZS2/TZY2/TZV2 Series (in m m ) 21±0.8 dia. 50 m in. 178±2 dia. 13±0.5 dia. 2±0.5 2±0.5 9±1.5 TZC3/TZB4 Series (in m m ) 21±0.8 dia. 50 m in. 178±2 dia. 13±0.5 dia. 2±0.5 2±0.5 14±1.5 n Dimension of dia. 330mm Reel TZR1/TZS2/TZY2/TZV2 Series (in m m ) 21±0.8 dia. 50 m in. 330±2 dia. 13±0.5 dia. 2±0.5 2±0.5 9.5±1.5 TZC3/TZB4 Series (in m m ) 21±0.8 dia. 50 m in. 330±2 dia. 13±0.5 dia. 2±0.5 2±0.5 14±1.5 n Dimension of Tape TZ03 Series 12.7 6.35±1.30±1.5 ø0.6±0.1 9.0±0.5 10.0 m ax. 1.5±1.5 1.3±0.5 1.5 m ax. 1.5 m ax. 18.0±0.5 3.85±0.75.0+0.8 −0.2 18.0±0.5 ∗1 : Tolerance varies w ith ΔS. ∗2 : Except 1m m from the stand-off position. (in m m ) n Ammo Pack TZ03 Series

Recommendable Adjustment Tools n For Manual Adjusutment Trimmer Capacitor Series MURATA Model Number Manufactures Model Number Bit Shape TZR1 TZS2 TZY2 TZV2 TZC3 Cross Slot Type TZC3 Standard Type (Minus Slot) TZB4 TZ03 KMDR160 KMDR050 KMDR060 KMDR020 KMDR040 KMDR010 MURATA MFG. MURATA MFG. FUTABA TOOL MFG. VESSEL MFG. TORAY INDUSTRIES.INC. MURATA MFG. KMDR160 KMDR050 DA-89 NO.9000-0.9g30 SA-1825 KMDR010 Minus Quadrangle Minus Minus Minus Minus n For Automatic Adjustment Trimmer Capacitor Series MURATA Model Number Manufactures Model Number Bit Shape TZS2 TZY2 TZV2 TZC3 Cross Slot Type TZC3 Standard Type (Minus Slot) TZB4 TZ03 KMBT050 KMBT060 KMBT020 KMBT040 KMBT010 MURATA MFG. MURATA MFG. MURATA MFG. TORAY INDUSTRIES.INC. MURATA MFG. KMBT050 KMBT060 KMBT020 JB-1825 KMBT010 Quadrangle Minus Minus Minus Minus Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26

Sabae M urata M fg.C o.,Ltd. Qualified Date August.14.1997 Standard U N D ER W R ITER S LABO R ATO R IES IN C . Qualified Number A5704 The products listed here has been produced by the Q S9000 and ISO 9002 certified factory ∗ N o O D C s (O zone D epleting C hem icals) are used on M urata's all trim m er potentiom eters ∗ TR IM C APr is a registered tradem ark of m urata M fg. C o.,Ltd. Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26

2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp http://www.murata.com/ Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. T13E7.pdf 02.3.26 Note: 1. Export Control <For customers outside Japan> Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. <For customers in Japan> For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. 2. Please contact our sales representatives or product engineers before using our products listed in this catalog for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property, or when intending to use one of our products for other applications than specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above 3. Product specifications in this catalog are as of March 2002. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before ordering. 5. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or third party's intellectual property rights and other related rights in consideration of your using our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 6. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.

Product Information

TZ03K200B001A00 specifications and overview.

Summary

Ceramic Trimmer Capacitors

Description

Ceramic Trimmer Capacitors

Source title TZ03K200B001A00 Datasheet(PDF) - Murata Manufacturing Co., Ltd.

Related Parts

More parts from the same family.

Browse manufacturer