SF2198E MURATA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
www.RFM.com E-mail: info@rfm.com Page 1 of 5 ©2009-2010 by RF Monolithics, Inc. SF2198E - 7/19/10
Electrical Characteristics
Characteristic Sym Notes Min Typ Max Units Center Frequency fC 806 MHz Insertion Loss, 791 to 821 MHz IL 4.5 dB Amplitude Ripple, 791 to 821 MHz 3.0 VSWR, 791 to 821 MHz 2.5:1 Attenuation, 0 dB Reference: dB DC to 760 MHz 45 760 to 775 MHz 30 832 to 862 MHz 8 862 to 900 MHz 30 900 to 1500 MHz 45 1500 to 2000 MHz 35 Source Impedance ZS 50 Ω Load Impedance ZL 50 Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator 928, YWWS Standard Reel Quantity Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Connection Terminals Input 2 Output 5 Case Ground All others SM3030-6
- Surface Mount 3.0 x 3.0 mm Package Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units Input Power Level 10 dBm DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -25 to +75 °C Storage Temperature Range in Tape and Reel -30 to +85 °C Maximum Soldering Profile, 5 cycles/10 seconds maximum 265 °C
806 MHz
- Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is depe ndent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototype s." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 8. RFM, stylized RFM logo, and RF Monolithics, Inc., are registered trademarks of RF Monolithics, Inc. Pb CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: Preliminary /G35 /G30 /G20 /G6F /G68 /G6D /G4C /G6F /G61 /G64 /G35 /G30 /G20 /G6F /G68 /G6D /G53 /G6F /G75 /G72 /G63 /G65 /G31 /G32 /G33 /G34 /G35 /G36 /G28 /G62 /G6F /G74 /G74 /G6F /G6D /G20 /G76 /G69 /G65 /G77 /G29
www.RFM.com E-mail: info@rfm.com Page 2 of 5 ©2009-2010 by RF Monolithics, Inc. SF2198E - 7/19/10 Filter Response Plots
806 MHz filter
-10 776 782 788 794 800 806 812 818 824 830 836 Freq.(MHz) Att.(dB) S21 spec. -70 -60 -50 -40 -30 -20 -10 656 686 716 746 776 806 836 866 896 926 956 Fr e q .( MHz ) Att.(dB) S21 spec.
www.RFM.com E-mail: info@rfm.com Page 3 of 5 ©2009-2010 by RF Monolithics, Inc. SF2198E - 7/19/10 -70 -60 -50 -40 -30 -20 -10 0 200 400 600 800 1000 1200 1400 1600 1800 2000Freq.(MHz) Att.(dB) S21 spec. 776 782 788 794 800 806 812 818 824 830 836 Freq.(MHz) VSWR S11 S22 spe c.
www.RFM.com E-mail: info@rfm.com Page 4 of 5 ©2009-2010 by RF Monolithics, Inc. SF2198E - 7/19/10 SM3030-6 Case TOP VIEW BOTTOM VIEW A BC D J EF GH I 928 YWWS /G4B /G4B /G4F /G4D /G4D /G4E /G4E /G4E /G4C 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Case Materials Dimension mm Inches Min Nom Max Min Nom Max K 3.20 0.126 L 1.70 0.067 M 1.05 0.041 N 0.81 0.032 O 0.38 0.015 Materials Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free PCB Footprint Top View
www.RFM.com E-mail: info@rfm.com Page 5 of 5 ©2009-2010 by RF Monolithics, Inc. SF2198E - 7/19/10 Tape and Reel Specifications “B” Quantity Per ReelInches millimeters 7 178 500 13 330 3000 See Detail "A" 13.0 20.22.0 12.0 100 REF. "B" REF. COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W 12.0 mm RO.3 (MAX.) Ko SECTION A-A 0.3 ± 0.05 SECTION B-B Bo 2.0 4.0 Ao Pitch BB A R0.5 (MAX.) A 5.5 12.0 1.75 1.5 1.50PIN #1 USER DIRECTION OF FEED