SF2199E MURATA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
www.RFM.com E-mail: info@rfm.com Page 1 of 5 © 2009-2012 by RF Monolithics, Inc. SF2199E - 4/25/12
Electrical Characteristics
Characteristic Sym Notes Min Typ Max Units Center Frequency fC 787 MHz Insertion Loss, 776 to 798 MHz IL 2.4 3.0 dBAmplitude Ripple, 776 to 798 MHz 0.6 1.5 Return Loss, 776 to 798 MHz 7 10 Attenuation, 0 dB Reference: dB 10 to 746 MHz 30 54 746 to 756 MHz 30 52 1056 to 1078 MHz 40 62 1078 to 2700 MHz 25 31 Source Impedance Z S 50 Load Impedance ZL 50 Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator 929, YWWS Standard Reel Quantity Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Connection Terminals Input 2 Output 5 Case Ground All others SM3030-6
- Surface Mount 3.0 x 3.0 mm Package
- Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units Input Power Level 20 dBm DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C Suitable for Lead-free Soldering - Maximum Soldering Profile 260 °C for 30 s
787 MHz
- Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 and measured with 50 network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is depe ndent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototype s." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 8. RFM, stylized RFM logo, and RF Monolithics, Inc., are registered trademarks of RF Monolithics, Inc. Pb CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: /G35 /G30 /G20 /G6F /G68 /G6D /G4C /G6F /G61 /G64 /G35 /G30 /G20 /G6F /G68 /G6D /G53 /G6F /G75 /G72 /G63 /G65 /G31 /G32 /G33 /G34 /G35 /G36 /G28 /G62 /G6F /G74 /G74 /G6F /G6D /G20 /G76 /G69 /G65 /G77 /G29
www.RFM.com E-mail: info@rfm.com Page 2 of 5 © 2009-2012 by RF Monolithics, Inc. SF2199E - 4/25/12 Filter Response Plots
787 MHz filter
-10 762 767 772 777 782 787 792 797 802 807 812 Fr eq.( MHz ) At t.(dB) S21 spec. -7 0 -6 0 -5 0 -4 0 -3 0 -2 0 -1 0 687 707 727 747 767 787 807 827 847 867 887 Fr eq. (MHz) Att.(dB) S21 spec.
www.RFM.com E-mail: info@rfm.com Page 3 of 5 © 2009-2012 by RF Monolithics, Inc. SF2199E - 4/25/12
787 MHz filt er
-80 -70 -60 -50 -40 -30 -20 -10 10 217 424 631 838 1045 1251 1458 1665 1872 2079 2286 2493 2700 Fre q.(MHz ) At t.(dB) S21 s pec .
www.RFM.com E-mail: info@rfm.com Page 4 of 5 © 2009-2012 by RF Monolithics, Inc. SF2199E - 4/25/12 SM3030-6 Case TOP VIEW BOTTOM VIEW A BC D J EF GH I 929 YWWS /G4B /G4B /G4F /G4D /G4D /G4E /G4E /G4E /G4C 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Case Materials Dimension mm Inches Min Nom Max Min Nom Max K 3.20 0.126 L 1.70 0.067 M 1.05 0.041 N 0.81 0.032 O 0.38 0.015 Materials Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free PCB Footprint Top View
www.RFM.com E-mail: info@rfm.com Page 5 of 5 © 2009-2012 by RF Monolithics, Inc. SF2199E - 4/25/12 Tape and Reel Specifications “B” Quantity Per ReelInches millimeters 7 178 1000 13 330 3000 See Detail "A" 13.0 20.22.0 12.0 100 REF. "B" REF. COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W1 2 . 0 m m RO.3 (MAX.) Ko SECTION A-A 0.3 ± 0.05 SECTION B-B Bo 2.0 4.0 Ao Pitch BB A R0.5 (MAX.) A 5.5 12.0 1.75 1.5 1.50PIN #1 USER DIRECTION OF FEED