TSSL GREYSTONE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
GREYSTONE HAS AN ISO 9001 REGISTERED QUALITY SYSTEM SLAB TEMPERATURE SENSOR TSSL SERIES PRODUCT DESCRIPTION The TSSL single point slab temperature sensor utilizes a precision sensor encapsulated in a thermal conductive coating (ZW, FT & MP) and used to measure the temperature of a concrete slab. The MS is encapsulated and potted in a 12.7 mm (0.5”)D X 101.5 mm (4”)L double walled, S/S probe that allows for total liquid submersion. They are available with various sensor types, wire types and lengths. All probes are constructed to provide excellent heat transfer, fast response and to resist moisture penetration. TYPICAL INSTALLATION For complete installation and wiring details, please refer to the product installation instructions. ZW, FT & MP: Typically a predetermined area is defined where the temperature reading is required. During concrete installation a sufficent length of conduit or copper tubing is imbedded from this point to an area that will be accessible once complete. At the entrance to the sensor chamber, unravel the TSSL and carefully insert sensor and feed into chamber until the chamber end is reached. MS: Unravel the sensor and lower the probe in the tank until below the liquid line or at desired depth. Secure cable to maintain depth. The probe may also be attached to the tank wall with some form of clamp at desired depth. SENSOR TYPE Various Thermistor or RTD TEMPERATURE RANGE ZW: -20 to 105°C (-4 to 221°F) FT: -20 to 60°C (-4 to 140°F) MP/MS: -20 to 80°C (-4 to 176°F) WIRE MATERIAL ZW: PVC Zip wire, 22 AWG FT: Plenum rated FT-6, 22 AWG MP: EPC Moisture proof, 20 AWG MS: EPC Moisture proof, 20 AWG PROBE MS: Double walled, 304 S/S, 12.7mm D x 101.5mm L (0.5” x 4”) TERMINATION Pigtail 2 or 3 wire COUNTRY OF ORIGIN Canada SPECIFICATIONS Sensor chamber previously embedded in slab Water Tank Sealed Sensor B Various lengths available A Model A B ZW, FT, MP 25.4mm (1”) 6.35mm (0.25”) ZW, FT or MP MS
PRINTED IN CANADA Copyright © Greystone Energy Systems Inc. All Rights Reserved www.greystoneenergy.com PS-TSSLXXX-02 Greystone Energy Systems, Inc.
150 English Drive, Moncton,
New Brunswick, Canada E1E 4G7 Ph: (506) 853-3057 Fax: (506) 853-6014 North America: 1-800-561-5611 E-mail: mail@greystoneenergy.com PRODUCT TSSLX Slab Temperature Sensor SENSOR 02 100 Ω Platinum, IEC 751, 385 Alpha, thin film 1801 Ω NTC Thermistor, ±0.2°C 3000 Ω NTC Thermistor, ±0.2°C 10,000 Ω Type 3, NTC Thermistor, ±0.2°C 2.252K Ω NTC Thermistor, ±0.2°C 1000 Ω Platinum, IEC 751, 385 Alpha, thin film 1000 Ω Nickel, Class B, DIN 43760 10,000 Ω Type 3, NTC Thermistor, ±0.2°C c/w 11K shunt resistor 20,000 Ω NTC Thermistor, ±0.2°C 10,000 Ω Type 2, NTC Thermistor, ±0.2°C WIRE TYPE ZW FT MP MS PVC Zip Wire - 22 AWG (Not available on Sensor 02 - 100Ω Platinum) Plenum rated FT-6 - 22 AWG Moisture Proof Burial - 20 AWG Moisture Proof Submersible - 20 AWG WIRE LENGTH 001 003 005 010 020 030 *** 1 m (3.3’) 3 m (9.8’) 5 m (16.4’) 10 m (32.8’) 20 m (65.6’) 30 m (98.5’) Custom lengths available ORDERING TSSL PART NUMBER NOTE: Greystone Energy Systems, Inc. reserves the right to make design modifications without prior notice.