TS60GSSD25D-M

TS60GSSD25D-M TRANSCEND | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 18

Technical content

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 Description Description Description Description Transcend 2.5” SATA II solid state drive is a huge capacity, high speed, and low power consumption without moving parts which design for take the plac e of traditional hard disk drive. It provides fast read and write performance for high end system such as server and storage system. Build in advance ECC and global wear-leveling provide a durable solution is perfect replacement storage device for Server systems, Storage systems, PCs, Laptops and gaming systems. Placement Placement Placement Placement Features Features Features Features

• Fully SATA II 3.0Gbps compatible
• Non-volatile Flash Memory for outstanding data retention
• Built-in 64MB DRAM cache buffer
• Built-in ECC (Error Correction Code) functionality and wear-leveling algorithm ensures highly reliable of data transfer
• Lower Power Consumption
• Shock resistance Dimensions Dimensions Dimensions Dimensions Side Millimeters Inches A 100.00 ± 0.40 3.937 ± 0.016 B 69.85 ± 0.20 2.750 ± 0.008 C 9.50 ± 0.20 0.374 ± 0.008

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 Specifications Specifications Specifications Specifications Physical Specification Form Factor 2.5-inch HDD Storage Capacities 60GB and 120GB Length 100.00 ± 0.40 Width 69.85 ± 0.20 Dimensions (mm) Height 9.50 ± 0.20 Input Voltage 5V ± 5% Weight 91g ± 2g Connector SATA 7+15 pins combo connector Environmental Specifications Operating Temperature 0 ℃ to 70 ℃ Storage Temperature - 40 ℃ to 85 ℃ Performance Model P/N Sequential Read (Max.) Sequential Write (Max.) TS60GSSD25D-M 210 MB/s 150 MB/s TS120GSSD25D-M 230 MB/s 180 MB/s Actual Capacity Model P/N User Max. LBA Cylinder Head Sector TS60GSSD25D-M 125,045,424 7,783 255 63 TS120GSSD25D-M 250,067,567 15,565 255 63 Power Requirements Input Voltage 5V ± 5% @25 ℃ Mode Max. (mA) Max. (W) Write (peak) 395.6 1.98 Read (peak) 176.7 0.88 Power Consumption (60GB) Idle (peak) 88.3 0.44 Write (peak) 534.9 2.67 Read (peak) 196.9 0.98 Power Consumption (120GB) Idle (peak) 88.3 0.44

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 Reliability Data Reliability Supports BCH ECC 8 ,12 or 16bits/sector Data Retention 10 years MTBF 1.5M hours Endurance 60GB: 75.7 years @ 20GB write/day 120GB: 151.4 years @ 20GB write/day Vibration Operating 5.0G, 15 – 800Hz Non-Operating 5.0G, 15 – 800Hz * Note: Reference to the IEC 60068-2-6 Testing procedures; Operating-Sine wave, 5-800Hz/1 oct., 1.5mm, 3g, 0.5 hr./axis, total 1.5 hrs. Shock Operating 1500G, 0.5ms Non-Operating 1500G, 0.5ms * Note: Reference to the IEC 60068-2-27 Testing procedures; Operating-Half-sine wave, 1500g, 0.5ms, 3 times/dir., total 18 times. Regulations Compliance CE, FCC and BSMI

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 Package Dimensions Package Dimensions Package Dimensions Package Dimensions Below figure illustrates the Transcend 2.5” SATA Solid State Drive. All dimensions are in mm.

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 Pin Pin Pin Pin Assignments Assignments Assignments Assignments Pin No. Pin Name Pin No. Pin Name

01 GND 02 A+

03 A- 04 GND

05 B- 06 B+

07 GND 08 NC

09 NC 10 NC

11 GND 12 GND

13 GND 14 5V

17 GND 18 DAS/DSS

19 GND 20 NC

21 NC 22 NC

Pin Pin Pin Pin Layout Layout Layout Layout 1 7 8 22

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 Bloc Bloc Bloc Block Diagramk Diagramk Diagramk Diagram Flash Flash Flash Flash Flash Flash Flash Flash Flash Flash Flash Flash Flash Flash Flash Flash SATA II 3.0Gb/s 32bits 16bits 16bits 16bits 16bits SATA SSD Controller SATA Connector DRAM

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 Reliability Reliability Reliability Reliability Wear-Leveling algorithm The controller supports static/dynamic wear leveling. When the host writes data, the controller will find and use the block with the lowest erase count among the free blocks. This is known as dynamic wear leveling. When the free blocks' erase count is higher than the data blocks', it will acti vate the static wear leveling, replacing the not so frequently used user blocks with the high erase count free blocks. ECC algorithm The controller use Reed Solomon code or BCH code option Reed Solomon: 6Bytes/sector for 128Bytes spare and 12Bytes/sector for 218Bytes spare BCH: 8 or 12 bits/sector for 128Bytes spare and 16bits/sector for 218Bytes spare size Bad-block management When the flash encounters ECC failed, program fail or erase fail, the controller will mark the block as bad block to prevent the used of this block and caused data lost later on.

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 Supported ATA Command Lists Supported ATA Command Lists Supported ATA Command Lists Supported ATA Command Lists

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 SMART SMART SMART SMART SMART subcommand sets In order to select a subcommand the host must write the subcommand code to the device's Features Regis ter before issuing the SMART Function Set command. The subcommands are listed below. SMART Read Data (subcommand D0h) This subcommand returns the device's Attribute Values to the host. The Attribute Values consist of 512bytes. Device Attribute Data Structure Individual Attribute Data Structure

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 Attribute ID Numbers * indicates that the corresponding Attribute Values is fixed value for compatibility. SMART Save Attribute Values (subcommand D3h) This subcommand causes the device to immediately sa ve any updated Attribute Values to the device's Att ribute Data sector regardless of the state of the Attribute Autosave feature. SMART Execute Off-line Immediately (subcommand D4h) This subcommand causes the device to start the off- line process for the requested mode and operation. The LBA Low register shall be set to specify the operation to be executed. SMART Read Log Sector (subcommand D5h) This command returns the specified log sector conte nt to the host. LBA Low and Sector Count registers shall be set to specify the log sector and sector number to be written. SMART Log Directory SMART summary error log sector

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 Error log data structure Command data structure

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 Error data structure State field values Self-test log structure N is 0 through 20. The data structure contains the descriptor of the Self-test that the device has performed. Each descriptor is 24 bytes long and the self-test data structure is capable to cont ain up to 21 descriptors. After 21 descriptors has been recorded, the oldest descriptor will be overwritten with the new descriptor. The self-test log pointer points to the most recent descriptor. When there is no descriptor, the value is 0. When there are descriptor(s), the value is 1 through 21.

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 Selective self-test log structure SMART Write Log Sector (subcommand D6h) This command writes 512 bytes of data to the specif ied log sector. LBA Low and Sector Count registers shall be set to specify the log address and sector number to be written. SMART Enable Operations (subcommand D8h) This subcommand enables access to all SMART capabil ities. Prior to receipt of a SMART Enable Operation s subcommand, Attribute Values are neither monitored nor saved by the device. The state of SMART—either enabled or disabled—will be preserved by the device across pow er cycles. Once enabled, the receipt of subsequent SMART Enable Operations subcommands will not affect any of the Attribute Values. SMART Disable Operations (subcommand D9h) This subcommand disables all SMART capabilities. Af ter receipt of this subcommand the device disables all SMART operations. Non self-preserved Attribute Values wil l no longer be monitored. The state of SMART—either enabled or disabled—is preserved by the device across power cy cles. Note that this subcommand does not preclude t he device's power mode attribute auto saving. After receipt of the SMART Disable Operations subco mmand from the host, all other SMART subcommands ex cept SMART Enable Operations are disabled and will be ab orted by the device returning the error code as spe cified in “SMART Error Codes”. Any Attribute Values accumulated and saved to volat ile memory prior to receipt of the SMART Disable Op erations command will be preserved in the device's Attribute Data Sectors. If the device is re-enabled, these Attribute Values will be updated, as needed, upon receipt of a SMART Read Attribute Values or a SMART Save Attribute Values command. SMART Return Status (subcommand DAh)

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 This subcommand is used to communicate the reliabil ity status of the device to the host's request. Upo n receipt of the SMART Return Status subcommand the device saves any updated Attribute Values to the reserved sector, a nd compares the updated Attribute Values to the Attribute Thresholds. SMART Enable/Disable Automatic Off-line (subcommand DBh) This subcommand enables and disables the optional f eature that cause the device to perform the set of off-line data collection activities that automatically collect at tribute data in an off-line mode and then save this data to the device's nonvolatile memory. This subcommand may either cause the device to automatically initiate or resume performance of its off-line data collection activities or cause the automatic off-line data collection feature to be disabled. This subcommand also enables and disables the off-line read scannin g feature that cause the device to perform the enti re read scanning with defect reallocation as the part of the off-line data collection activities. The Sector Count register shall be set to specify the feature to be enabled or disabled: Sector Count Feature Description 00h Disable Automatic Off-line F8h Enable Automatic Off-line A value of zero written by the host into the device's Sector Count register before issuing this subcommand shall cause the automatic off-line data collection feature to be disabled. Disabling this feature does not preclude the device from saving attribute values to nonvolatile memory during some other normal operation such as during a power-on, during a power-off sequence, or during an error recovery sequence. A value of F8h written by the host into the device's Sector Count register before issuing this subcommand shall cause the auto matic Off-line data collection feature to be enable d. Any other non-zero value written by the host into this register before issuing this subcommand is vendor specific and will not change the current Automatic Off-Line Data Collection and Off-line Read Scanning status. However, the device may respond with the error code specified in “SMART Error Codes”. Security Security Security Security Default setting The Flash SSD is shipped with master password set t o 20h value (ASCII blanks) and the lock function di sabled. The system manufacturer/dealer may set a new master pas sword by using the SECURITY SET PASSWORD command, without enabling the lock function. Initial setting of the user password When a user password is set, the drive automatically enters lock mode by the next powered-on. SECURITY mode operation from power-on In locked mode, the Flash SSD rejects media access commands until a SECURITY UNLOCK command is success fully completed. Password lost If the user password is lost and High level security is set, the drive does not allow the user to access any data. However, the drive can be unlocked using the master password. If the user password is lost and Maximum security level is set, it is impossible to access data. However, the drive can be

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 unlocked using the ERASE UNIT command with the mast er password. The drive will erase all user data and unlock the drive. SATA Optional Features SATA Optional Features SATA Optional Features SATA Optional Features Power Segment Pin P11 Pin P11 of the power segment of the device connecto r may be used by the device to provide the host wit h an activity indication. The activity indication provided by pin P11 is primarily for use in backplane applications. Asynchronous Signal Recovery Phy may support asynchronous signal recovery for those applications where the usage model of device in sertion into a receptacle (power applied at time of insertion) does not apply. When signal is lost, both the host and the device may attempt to recover the signal. A host or device shall determine loss of signal as represented by a transition from PHYRD Y to PHYRDYn, which is associated with entry into s tates LSI: NoCommErr or LS2:NoComm within the Link layer. Note that negation of PHYRDY does not always constitute a loss of signal. Recovery of the signal is associated with exit from state LS2:NoComm. If the device attempts to recover the signal before the host by issuing a COMINIT, the device sh all return its signature following completion of th e OOB sequence which included COMINIT. If a host supports synchron ous signal recovery, when the host receives an unso licited COMINIT, the host shall issue a COMRESET to the dev ice. An unsolicited COMINIT is a COMINIT that was n ot in response to a preceding COMRESET, as defined by the host not being in the HP2:HR_AwaitCOMINIT state wh en the COMINIT signal is first received. When a COMRESET is sent to the device in response to an unsolicited COMINIT, the host shall set the Status register to 7Fh and shall set all other Shadow Command Block Registers to FFh. When the COMINIT is received in response to the COMRESET which is associated with entry into state HP2B:HR_AwaitNoCOMINIT, the Shadow Status register value shall be updated to either FFh or 80h to reflect that a device is attached.

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 Identify Device Parameters Identify Device Parameters Identify Device Parameters Identify Device Parameters Word Contents Description 0 0C5Ah General information 1 3FFFh Number of logical cylinders

2 C837h Specific configuration

3 0010h Number of logical heads 4 – 5 0 Retired 6 003Fh Number of logical sectors per logical track 7 – 8 0 Reserved 9 0000h Retired 10 -19 XXXX Serial number(20 ASCII characters) 20 0000h Retired

21 FFFFh Buffer Memory Size

23 - 26 XXXX Firmware revision (8 ASCII characters) 27- 46 XXXX Model number 47 8001h Number of sectors on multiple commands 48 0000h Reserved 49 2F00h Capabilities 50 4000h Capabilities 51 - 52 0200h PIO Mode support 53 0007h Reserved 54 3FFFh Number of current logical cylinders 55 0010h Number of current logical heads 56 003Fh Number of current logical sectors per track

57 FC10h

59 0101h Multiple sector setting

60 XXXXh

61 XXXXh

Total number of user addressable sectors (LBA mode only) 62 0000h Obsolete 63 0007h Multi-word DMA transfer 64 0003h Flow control PIO transfer modes supported 65 0078h Minimum Multiword DMA transfer cycle time per word 66 0078h Manufacturer’s recommended Multiword DMA transfer cycle time per word 67 0078h Minimum PIO transfer cycle time without flow control 68 0078h Minimum PIO transfer cycle time with IORDY flow control 69 - 74 0 Reserved 75 001Fh Queue Depth 76 0506h Serial ATA capability 77 0000h Reserved 78 004Ch Serial ATA features supported 79 0048h Serial ATA features enabled 80 01E0h Major Version Number 81 0000h Minor Version Number

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 82 346Bh Command sets supported 83 7D01h Command sets supported 84 4022h Command set/feature supported extension 85 3469h Command set/feature enabled 86 3C01h Command set/feature enabled 87 4022h Command set/feature default 88 407Fh Ultra DMA transfer 89 0000h Time required for security erase unit completion 90 0000h Time required for Enhanced security erase completion 91 0000h Current advanced power management value 92 0000h Master Password Revision Code 93 0000h COMRESET result 94 0000h Automatic acoustic management value 95 0000h Stream minimum request size 96 - 99 0 Reserved 100 - 103 XXXX Maximum user LBA for 48bit address feature set 104-105 0 Reserved 106 4000h Physical sector size / logical sector size 107 0000h Reserved 108 - 111 XXXX Unique ID 112 - 116 0 Reserved 117 - 118 0 Words per logical sector 119 - 126 0 Reserved 127 0000h Removable media status notification feature set supported

128 XXXXh Security status

255 XXXXh Integrity word

TTTSSS666000GGGSSSSSSDDD222555DDD---MMM TTTSSS111222000GGGSSSSSSDDD222555DDD---MMM 2.5” Solid State Drive Transcend Information Inc. Preliminary V1.02 Ordering Information Ordering Information Ordering Information Ordering Information Capacity 60GB or 120GB Solid State Drive Transcend Product -S = SLC -M = MLC Form Factor 25D = 2.5 " SATA w/ DRAM TS XG SSD25D- X The above technical information is based on industr y standard data and has been tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes to the specifications at any time without prior notice. USA Los Angeles: E-mail: sales@transcendusa.com Maryland: E-mail: sales_md@transcendusa.com www.transcendusa.com CHINA E-mail: sales@transcendchina.com www.transcendchina.com GERMANY E-mail: vertrieb@transcend.de www.transcend.de HONG KONG E-mail: sales@transcend.com.hk www.transcend.com.hk JAPAN E-mail: sales@transcend.co.jp www.transcend.jp THE NETHERLANDS E-mail: sales@transcend.nl www.transcend.nl United Kingdom E-mail: sales@transcend-uk.com www.transcend-uk.com TAIWAN TEL +886-2-2792-8000 Fax +886-2-2793-2222 E-mail: sales@transcend.com.tw www.transcend.com.tw KOREA E-mail: sales@transcend.co.kr www.transcend.co.kr