TS1GSDOM7H

TS128MSDOM7H TRANSCEND | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

TTTSSS111222888MMM~~~888GGGSSSDDDOOOMMM777HHH 7P Horizontal Type SATA Flash Modules Transcend Information Inc. V0.1 Description Description Description Description Serial-ATA is designed as a successor to the legacy SATA standard. The new standard is dedicated to achieve higher transfer rate with thinner cables and more reliable operation than Parallel ATA interface. SATA Flash Modules is perfect replacement storage device for PCs, Laptops, gaming systems, and handheld devices. Placement Placement Placement Placement Features Features Features Features

• RoHS compliant
• Fully compatible with devices and OS that support the SATA 1.0a 1.5Gbps standard
• 7 pin female SATA connector with latch
• Connect to motherboard directly without cable
• Non-volatile Flash Memory for outstanding data retention
• The on-chip hardware 13/24 bit BCH-ECC engines can correct up to 24 bit errors per 1,024 byte data.
• Support global wear-leveling algorithm which ensures maximum lifespan.
• Supports /head2right Ultra DMA Mode 0 to 5 /head2right Multiword DMA mode 0 to 2 /head2right PIO Mode 0 to 4
• Supports ATA Security Commands
• Support S.M.A.R.T function (self-definition)
• Mechanical write-protect switch
• Low Power Consumption
• Power Supply: 3.3V ± 5%(UDMA mode 5) / 5.0V ± 10%(UDMA mode 4 or lower)
• Shock resistance Dimensions Dimensions Dimensions Dimensions Side Millimeters Inches A 40.0 ± 0.3 1.57 ± 0.012 B 30.0 ± 0.2 1.18 ± 0.008 * Please refer to Mechanical Drawing

TTTSSS111222888MMM~~~888GGGSSSDDDOOOMMM777HHH 7P Horizontal Type SATA Flash Modules Transcend Information Inc. V0.1 Specifications Specifications Specifications Specifications Physical Specification Form Factor SATA Flash Module Horizontal Type Storage Capacities 128M~8GB Length 40.0 ± 0.3 Width 30.0 ± 0.2 (Not including Write-Protect Switch and SATA connector) Dimensions (mm) Height 24.3 ± 0.5 (refer to mechanical drawing) Input Voltage 5V ± 10% / 3.3V ± 5% Weight 8 g Connector Signal: SATA 7 pins female connector with latch Power: 2P 1.5mm pitch wafer connector Environmental Specifications Operating Temperature 0 ℃ to 70 ℃ Storage Temperature - 40 ℃ to 85 ℃ Power Consumption Crystal Disk Mark 1.0.6 / 50MB Read 212.2 mA(peak) Write 207.3 mA(peak) 4GB SATA Flash Modules Power Consumption (DC 5V @25 ℃ ) Standby 111.8 mA

TTTSSS111222888MMM~~~888GGGSSSDDDOOOMMM777HHH 7P Horizontal Type SATA Flash Modules Transcend Information Inc. V0.1 * Note : The performance is based on Samsung K9F8G08U0M, single channel. Environment: at 25 ℃ , tested with GA-8IG1000MK, 256 MB RAM, SATA interface support UDMA5, Windows ® XP Version 2002 SP2, benchmark utility : HDBENCH (version 3.4006), copied file 100MB Actual Capacity Model P/N Capacity C/H/S Capacity User capacity (By tes) TS512MSDOM7H 512M 971 / 16 / 63 477MB 500,432,896 TS1GSDOM7H 1GB 1966 / 16 / 63 967MB 1,014,333,440 TS2GSDOM7H 2GB 3900 / 16 / 63 1.87GB 2,008,801,280 TS4GSDOM7H 4GB 7785 / 16 / 63 3.73GB 4,009,922,560 TS8GSDOM7H 8GB 15538 / 16 / 63 7.46GB 8,016,560,128 * Note: FAT format for <4GB, FAT32 format for 4~8GB Reliability Data Reliability 13bit/1K Byte BCH ECC(2k+64 / 4k+128 byte per page flash) 24bit/1K Byte BCH ECC(4k+208 byte per page flash) Data Retention 10 years Connector Durability 500 mating cycles Performance* Model P/N Read (KB/s) Write (KB/s) Random Read (KB/ s) Random Write (KB/s) 2GB SATA Flash Module 53696 25491 51174 10518 Certification EMC CE, FCC and BSMI (T.B.D)

TTTSSS111222888MMM~~~888GGGSSSDDDOOOMMM777HHH 7P Horizontal Type SATA Flash Modules Transcend Information Inc. V0.1 Mechanical Drawing Bottom View (Normal Type) Side View (Normal Type) AA AA BB BB CC CC

TTTSSS111222888MMM~~~888GGGSSSDDDOOOMMM777HHH 7P Horizontal Type SATA Flash Modules Transcend Information Inc. V0.1 Bottom View (Reversed Type) Side View (Reversed Type) AA AA BB BB CC CC

TTTSSS111222888MMM~~~888GGGSSSDDDOOOMMM777HHH 7P Horizontal Type SATA Flash Modules Transcend Information Inc. V0.1 Functionality Pin Assignments Pin No. Pin Name

01 GND

04 GND

07 GND

TTTSSS111222888MMM~~~888GGGSSSDDDOOOMMM777HHH 7P Horizontal Type SATA Flash Modules Transcend Information Inc. V0.1 Blo Blo Blo Block Diagramck Diagramck Diagramck Diagram DC Characteristics DC Characteristics DC Characteristics DC Characteristics Parameter Symbol Min. Max. Unit Remark Supply Voltage V CC 2.97 5.5 V High level output voltage V OH V CC – 0.8 V Low level output voltage V OL 0.8 V

2.4 V Non-schmitt trigger

2.05 V Schmitt trigger 1

0.6 V Non-schmitt trigger

1.25 V Schmitt trigger 1

Pull up resistance 2 R PU 52.7 141 KOhm Pull down resistance R PD 47.5 172 kOhm IDE Flash Disk Controller Flash Memory D0 – D7 -CE0 ~ -CE3 -WE… -RE Flash Memory D0 – D7 -CE0 ~ -CE3 -WE… -RE D0 ~ D7 D8 ~ D 15 -CE0, -CE1 … -CE0, -CE1 … Data bus Control Signal Others PATA to SATA Bridge SATA 7 PIN Connector Data bus 5V/3.3V 3.3V/1.8V Voltage Regulator Flash Memory

2 PIN

TTTSSS111222888MMM~~~888GGGSSSDDDOOOMMM777HHH 7P Horizontal Type SATA Flash Modules Transcend Information Inc. V0.1 Command Set Command Set Command Set Command Set Command Code FR SC SN CY DH LBA Status Note

1 Check Power Mode E5 or 98h – – – – Y – Support

2 Execute Drive Diagnostic 90h – – – – Y – Support

3 Erase Sector C0h – Y Y Y Y Y Support

4 Flush Cache E7h – – – – Y – Support

5 Format Track 50h – Y – Y Y Y Support

6 Identify Device ECh – – – – Y – Support

7 Idle E3h or 97h – Y – – Y – Support

8 Idle Immediate E1h or 95h – – – – Y – Support

9 Initialize Drive Parameters 91h – Y – – Y – Support

10 NOP 00h – – – – Y – Support

11 Read Buffer E4h – – – – Y – Support

12 Read DMA C8h – Y Y Y Y Y Support

13 Read Multiple C4h – Y Y Y Y Y Support

14 Read Sector(s) 20h or 21h – Y Y Y Y Y Support

15 Read Verify Sector(s) 40h or 41h – Y Y Y Y Y Support

16 Recalibrate 1Xh – – – – Y – Support

17 Request Sense 03h – – – – Y – Support

18 Security Disable Password F6h – – – – Y – Support

19 Security Erase Prepare F3h – – – – Y – Support

20 Security Erase Unit F4h – – – – Y – Support

21 Security Freeze Lock F5h – – – – Y – Support

22 Security Set Password F1h – – – – Y – Support

23 Security Unlock F2h – – – – Y – Support

24 Seek 7Xh – – Y Y Y Y Support

25 Set Feature EFh Y – – – Y – Support

26 Set Multiple Mode C6h – Y – – Y – Support

27 Set Sleep Mode E6h or 99h – – – – Y – Support

28 Standby E2 or 96h – – – – Y – Support

29 Standby Immediate E0 or 94h – – – – Y – Support

TTTSSS111222888MMM~~~888GGGSSSDDDOOOMMM777HHH 7P Horizontal Type SATA Flash Modules Transcend Information Inc. V0.1

30 Translate Sector 87h – Y Y Y Y Y Support

31 Wear Level F5h – – – – Y – Support

32 Write Buffer E8h – – – – Y – Support

33 Write DMA CAh – Y Y Y Y Y Support

34 Write Multiple C5h – Y Y Y Y Y Support

35 Write Multiple w/o Erase CDh – Y Y Y Y Y Support

36 Write Sector(s) 30h or 31h – Y Y Y Y Y Support

37 Write Sector(s) w/o Erase 38h – Y Y Y Y Y Support

38 Write Verify 3Ch – Y Y Y Y Y Support

FR = Features Register SC =Sector Count register (00H to FFH, 00H means 256 sectors) SN = Sector Number register CY = Cylinder Low/High register DH = Head No. (0 to 15) of Drive/Head register LBA = Logic Block Address Mode Support – = Not used for the command Y = Used for the command

TTTSSS111222888MMM~~~888GGGSSSDDDOOOMMM777HHH 7P Horizontal Type SATA Flash Modules Transcend Information Inc. V0.1 SMART Command Set SMART Command Set SMART Command Set SMART Command Set /circle6 SMART Command Set SMART Feature Register Values D0h Read Data D5h Read Log D1h Read Attribute Threshold D6h Write Log D2h Enable/Disable Autosave D8h Enable SMART Operat ions D3h Save Attribute Values D9h Disable SMART Operati ons D4h Execute OFF-LINE Immediate DAh Return Status 1. If reserved size is below the Threshold, the status can be read from Cylinder register by Return Status command (DAh). /circle6 SMART Data Structure BYTE F / V Decription 2-361 X Vendor specific

362 V Off line data collection status

363 X Self-test execution status byte

364-365 V Total time in seconds to complete off-lin e data collection activity

366 X Vendor specific

367 F Off-line data collection capability

368-369 F SMART capability 370 F Error logging capability 7-1 Reserved 0 1=Device error logging supported

371 X Vendor specific

372 F Short self-test routine recommended polling time (in minutes)

373 F Extended self-test routine recommended polli ng time (in minutes)

374 F Conveyance self-test routine recommended pol ling time (in minutes)

396-397 F Number of initial invalid block (396 = MS B, 397 = LSB) 398-399 V Number of run time bad block (398 = MSB, 399 = LSB)

400 V Number of spare block

TTTSSS111222888MMM~~~888GGGSSSDDDOOOMMM777HHH 7P Horizontal Type SATA Flash Modules Transcend Information Inc. V0.1

511 V Data structure checksum

F=the content of the byte is fixed and does not change. V=the content of the byte is variable and may change depending on the state of the device or the commands executed by the device. X=the content of the byte is vendor specific and may be fixed or variable. R=the content of the byte is reserved and shall be zero. * 4 Byte value : [MSB] [2] [1] [LSB]

TTTSSS111222888MMM~~~888GGGSSSDDDOOOMMM777HHH 7P Horizontal Type SATA Flash Modules Transcend Information Inc. V0.1 ID T ID T ID T ID Table able able able Information Information Information Information Word Address Default Value Total Bytes Data Field Type Information 044Ah 2 General configuration – Bit Significant wi th ATA-7 definitions.

1 XXXXh 2 Default number of cylinders

3 00XXh 2 Default number of heads 4 0000h 2 Obsolete 5 0240h 2 Obsolete

6 XXXXh 2 Default number of sectors per track

7-8 XXXXh 4 Number of sectors per card (Word 7 = MS W, Word 8 = LSW)

9 XXXXh 2 Obsolete

10-19 aaaa 20 Serial number in ASCII (Right Justifi ed) 20 0002h 2 Obsolete 21 0002h 2 Obsolete 22 0000h 2 Number of ECC bytes passed on Read/Write Long Commands 23-26 aaaa 8 Firmware revision in ASCII. Big Endian Byte Order in Word 27-46 aaaa 40 Model number in ASCII (Left Justified ) Big Endian Byte Order in Word

47 XXXXh 2 Maximum number of sectors on Read/Write Multiple command

49 0F00h 2 Capabilities ( Default) 50 0000h 2 Reserved 51 0200h 2 PIO data transfer cycle timing mode (PIO mode 2) 52 0000h 2 Obsolete 53 0007h 2 Field Validity

54 XXXXh 2 Current numbers of cylinders

55 XXXXh 2 Current numbers of heads

56 XXXXh 2 Current sectors per track

57-58 XXXXh 4 Current capacity in sectors (LBAs)(Wo rd 57 = LSW, Word 58 = MSW) 59 0100h 2 Multiple sector setting 60-61 XXXXh 4 Total number of sectors addressable i n LBA Mode 62 0000h 2 Reserved 63 0007h 2 Multiword DMA transfer. (Support Multiw ord mode 0-2) 64 0003h 2 Advanced PIO modes supported (Support PI O mode 3 and PIO mode 4) 65 0078h 2 Minimum Multiword DMA transfer cycle tim e per word. (120ns) 66 0078h 2 Recommended Multiword DMA transfer cycle time. (120ns) 67 0078h 2 Minimum PIO transfer cycle time without flow control (120ns)

TTTSSS111222888MMM~~~888GGGSSSDDDOOOMMM777HHH 7P Horizontal Type SATA Flash Modules Transcend Information Inc. V0.1 Word Address Default Value Total Bytes Data Field Type Information 68 0078h 2 Minimum PIO transfer cycle time with IOR DY flow control (120ns) 69-79 0000h 22 Reserved 80 0080h 2 Major revision number 81 0000h 2 Mimor revision number 82 742Bh 2 Command sets supported 0 83 5008h 2 Command sets supported 1 84 4003h 2 Command sets supported 2

85 XXXXh 2 Command sets Enable 0

86 XXXXh 2 Command sets Enable 1

87 4003h 2 Command sets Enable 2 88 003Fh 2 Ultra DMA Mode Supported and Selected 89 0001h 2 Time required for Security erase unit co mpletion (2 min) 90 0000h 2 Time required for Enhanced security eras e unit completion 91 0000h 2 Current Advanced power management value 92 0000h 2 Reserved

93 XXXXh 2 Hardware configuration test result

128 0001h 2 Security status (Default) 129-159 0000h 62 Vendor unique bytes 160 0000h 2 Power requirement description 161-255 0000h 190 Reserved

TTTSSS111222888MMM~~~888GGGSSSDDDOOOMMM777HHH 7P Horizontal Type SATA Flash Modules Transcend Information Inc. V0.1 Ordering Information Ordering Information Ordering Information Ordering Information 1. The above technical information is based on indu stry standard data and has been tested to be reliab le. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes to the specifications at any time without prior notice. 2. For specific capacity, performance, and reliability requirement, please contact with sales. USA Los Angeles: E-mail: sales@transcendusa.com Maryland : E-mail: sales_md@transcendusa.com www.transcendusa.com CHINA E-mail: sales@transcendchina.com www.transcendchina.com GERMANY E-mail: vertrieb@transcend.de www.transcend.de HONG KONG E-mail: sales@transcend.com.hk www.transcendchina.com JAPAN E-mail: sales@transcend.co.jp www.transcend.jp THE NETHERLANDS E-mail: sales@transcend.nl www.transcend.nl United Kingdom E-mail: sales@transcend-uk.com www.transcend-uk.com TAIWAN TEL +886-2-2792-8000 Fax +886-2-2793-2222 E-mail: sales@transcend.com.tw www.transcend.com.tw Korea E-mail: sales@transcend.co.kr www.transcend.co.kr TS XG SDOM XX Capacity: 128M-8G SATA Flash Module Transcend Product Connector type 7H = 7pin SATA horizontal 22V = 22pin SATA vertical 22H = 22pin SATA horizon tal