TS128MCF200I

Transcend Information. ...

TTr rraannsscceenndd I IInndduusst ttr rri iaal ll CCFF CCaar rrdd

Manufacturer: Transcend Information. ...

Document: 87 Pages / 1Mb

Request Quote Download Datasheet Read online HTML view

More from Transcend Information. ... Browse T parts

Online Datasheet

Read TS128MCF200I online.

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 87

Technical content

Features

CompactFlash Specification Version 4.1 Compliant
RoHS compliant products
Single Power Supply: 3.3V±5% or 5V±10%
Operating Temperature: -40 oC to 85 oC
Storage Temperature: -55oC to 100oC
Humidity (Non condensation): 0% to 95%
Built-in 13/24-bit ECC (Error Correction Code) functionality and wear-leveling algorithm ensures highly reliable of data transfer /checkbld 13bit BCH ECC (2k+64 / 4k+128 byte per page flash) /checkbld 24bit BCH ECC (4k+208 byte per page flash)
Operation Modes: /checkbld PC Card Memory Mode /checkbld PC Card IO Mode /checkbld True DE Mode
True IDE Mode supports: /checkbld Ultra DMA Mode 0 to 5 (UDMA4 as default) /checkbld Multi-Word DMA Mode 0 to 4 /checkbld PIO Mode 0 to 6
True IDE Mode: Fixed Disk (Default)
PC Card Mode: Fixed Disk (Default)
Durability of Connector: 10,000 times
MTBF: 2,000,000 hours (in 25 ℃)
Support Global Wear-Leveling, Static Data Refresh, Early Retirement, and Erase Count Monitor functions to extend product life
Support S.M.A.R.T (Self-defined)
Support Security Command
Compliant to CompactFlash, PCMCIA, and ATA standards

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2

Ordering Information

Part Number Interface Transfer Mode Disk Type True IDE mode Ultra DMA mode 0~5 (UDMA4 as default) Multi-Word DMA Mode 0~4 PIO Mode 0 ~ 6 Fixed Disk (Default) TS128M~16GCF200I PC Card mode (PCMCIA) 80ns, 100ns, 120ns, 250ns Fixed Disk (Default) C.H.S Table Capacity C H S Physical Capacity 128MB 246 16 63 126,959,616 bytes 256MB 493 16 63 254,435,328 bytes 512MB 987 16 63 509,386,752 bytes 1GB 1974 16 63 1,018,773,504 bytes 2GB 3949 16 63 2,038,063,104 bytes 4GB 7899 16 63 4,076,642,304 bytes 8GB 15798 16 63 8,153,284,608 bytes 16GB 16383 15 63 16,039,018,496 bytes 32GB 16383 15 63 32,019,316,736 bytes /circle6 Note: FAT format for <4GB, FAT32 format for 4~32GB * Note : 25 ℃, according to CF to IDE connector test on P5K-VM, 1GB RAM * 2, IDE interface support UDMA4, Performance Model P/N Read (KB/s) Write (KB/s) Random Read (KB/ s) Random Write (KB/s) TS128MCF200I 25440 7362 24482 2559 TS256MCF200I 25940 10697 24719 3513 TS512MCF200I 25940 10317 24482 3390 TS1GCF200I 29111 12363 27563 4121 TS2GCF200I 28804 20791 27288 5079 TS4GCF200I 28784 22200 26736 6635 TS8GCF200I 49349 36900 44425 11966 TS16GCF200I 50381 39689 46757 10739 TS32GCF200I 51979 35992 48165 7892

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Windows ® XP Version 2002 SP2, benchmark utility FDBENCH (version 1.02), copied file 40MB 1. Read/Write operation is drived by IOMeter with 1 0MB file each operation. 2. StandBy Current : 5V : 2.8mA 3.3V : 2.2mA 3. All data above are maximum value of each measurements. Power Requirements (DC 5V, 3.3V @25 ℃) Current Magnitude (mA) Part Number & Input Voltage Read Write 3.3V ± 10% 61 52.6 TS128MCF200I 5V ± 10% 102.6 53.4 3.3V ± 10% 61.3 57.6 TS256MCF200I 5V ± 10% 99 58.8 3.3V ± 10% 86.9 57.8 TS512MCF200I 5V ± 10% 64.1 59.3 3.3V ± 10% 67.5 65.9 TS1GCF200I 5V ± 10% 71.3 68.6 3.3V ± 10% 71 89.6 TS2GCF200I 5V ± 10% 116 93.1 3.3V ± 10% 69.6 89.2 TS4GCF200I 5V ± 10% 113.8 98.9 3.3V ± 10% 88.6 137.1 TS8GCF200I 5V ± 10% 99.9 139.9 3.3V ± 10% 139.5 143.4 TS16GCF200I 5V ± 10% 173.4 152.6 3.3V ± 10% 142.0 131.9 TS32GCF200I 5V ± 10% 165.8 143.5 SHOCK & Vibration Test Condition Standard Mechanical Shock Test 1500G, 0.5ms, 3 axes IEC 60068-2-27 Vibration Test 20G (Peak-to-Peak) 20Hz to 2000Hz (Frequency) IEC 60068-2-6 Regulations Compliance CE, FCC and BSMI

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 More Functions to extend product life 1. Global Wear Leveling – Advanced algorithm to enhance the Wear-Leveling Efficiency There are 3 main processes in global wear leveling approaches: (1) Record the block erase count and save in the wear-leveling table. (2) Find the static-block and save it in wear-leveling pointer. (3) Check the erase count when the block popped from spare pool. If the block erase count is bigger than WEARCNT, then swapped the static-block and over-count-block. After actual test, global wear leveling successfully even the erase count of every block; hence, it can extend the life expectancy of Flash product. 2. StaticDataRefresh Technology – Keeping Data Healthy There are many variants that would disturb the charge inside a Flash cell. These variants can be: time, read operations, undesired charge, heat, etc; each variant would create a charge loss, and the contents shift in their charge levels slightly. In our everyday usage – more than 60% are repeated read operations, the accumulated charge loss would eventually result in the data loss. Normally, ECC engine corrections are taken place wi thout affecting the host normal operations. As time passes by, the number of error bits accumulate d in the read transaction exceeds the correcting capability of the ECC engine, resulting in corrupted data being sent to the host. To prevent this, Transcend’s CF200I monitor the err or bit levels at each read operation; when it reaches the preset threshold value, the controller automatically performs data re fresh to “restore” the correct charge levels in the cell. This implementation practically restores the data to its original, error-free state, and hence, lengthening the life of the data. 3. EarlyRetirement – Avoiding Data Loss Due to Weak Block The StaticDataRefresh feature functions well when t he cells in a block are still healthy. As the block ages over time, it cannot store charge reliably anymore, EarlyRetirement enters the scene. EarlyRetirement works by moving the static data to another block (a health block) before the previously used block becomes completely incapable of holding charges for data. When the charge loss error level exceeds another threshold value (higher from that f or StaticDataRefresh), the controller automatically moves its data to another block. In addition, the original block is then marked as a bad block, w hich prevents its further use, and thus the block enters the state of “EarlyRetirement.” Note that, through this process, the incorrect data are detected and effectively corrected by the ECC engine, thus the data in the new block is stored error-free.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Transcend

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Block Diagram

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Pin Assignments and Pin Type

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Note: 1) These signals are required only for 16 bit accesses and not required when installed in 8 bit systems. Devices should allow for 3-state signals not to consume current. 2) The signal should be grounded by the host. 3) The signal should be tied to VCC by the host. 4) The mode is required for CompactFlash Storage Cards. 5) The -CSEL signal is ignored by the card in PC Card modes. However, because it is not pulled upon the card in these modes, it should not be left floating by the host in PC Card modes. In these modes, the pin should be connected by the host to PC Card A25 or grounded by the host. 6) If DMA operations are not used, the signal should be held high or tied to VCC by the host. For proper operation in older hosts: while DMA operations are not active, the card shall ignore this signal,including a floating condition 7) Signal usage in True IDE Mode except when Ultra DMA mode protocol is active. 8) Signal usage in True IDE Mode when Ultra DMA mode protocol DMA Write is active. 9) Signal usage in True IDE Mode when Ultra DMA mod e protocol DMA Read is active. 10) Signal usage in PC Card I/O and Memory Mode when Ultra DMA mode protocol DMA Write is active. 11) Signal usage in PC Card I/O and Memory Mode when Ultra DMA mode protocol DMA Read is active. 12) Signal usage in PC Card I/O and Memory Mode when Ultra DMA protocol is active.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Signal Description Signal Name Dir. Pin Description A10 – A00 (PC Card Memory Mode) A10 – A00 (PC Card I/O Mode) A02 - A00 (True IDE Mode) I I 8,10,11,12, 14,15,16,17, 18,19,20 18,19,20 These address lines along with the -REG signal are used to select the following: The I/O port address registers within the CompactFlash Storage Card , the memory mapped port address registers within the CompactFlash Storage Card, a byte in the card's information structure and its configur ation control and status registers. This signal is the same as the PC Card Memory Mode signal. In True IDE Mode, only A[02:00] are used to select the one of eight registers in the Task File, the remaining address lines should be grounded by the host. BVD1 (PC Card Memory Mode) -STSCHG (PC Card I/O Mode) Status Changed -PDIAG (True IDE Mode) I/O 46 This signal is asserted high, as BVD1 is not supported. This signal is asserted low to alert the host to changes in the READY and Write Protect states, while the I/O interface is configured. Its use is controlled by the Card Config and Status Register. In the True IDE Mode, this input / output is the Pass Diagnostic signal in the Master / Slave handshake protocol. BVD2 (PC Card Memory Mode) -SPKR (PC Card I/O Mode) -DASP (True IDE Mode) I/O 45 This signal is asserted high, as BVD2 is not supported. This line is the Binary Audio output from the card. If the Card does not support the Binary Audio function, this line should be held negated. In the True IDE Mode, this input/output is the Disk Active/Slave Present signal in the Master/Slave handshake protocol. -CD1, -CD2 (PC Card Memory Mode) -CD1, -CD2 (PC Card I/O Mode) -CD1, -CD2 (True IDE Mode) O 26,25 These Card Detect pins are connected to ground on the CompactFlash Storage Card. They are used by the host to determine that the CompactFlash Storage Card is fully inserted into its socket. This signal is the same for all modes. This signal is the same for all modes.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Signal Name Dir. Pin Description -CE1, -CE2 (PC Card Memory Mode) Card Enable -CE1, -CE2 (PC Card I/O Mode) Card Enable -CS0, -CS1 (True IDE Mode) I 7,32 These input signals are used both to select the car d and to indicate to the card whether a byte or a word operation is being performed. -CE2 always accesses the odd byte of the word.-CE1 accesses the even byte or the Odd byte of the word depending on A0 and -CE2. A multiplexing scheme based on A0,-CE1, -CE2 allows 8 bit hosts to access all data on D0-D7. See Table 27, Table 29, Table 31, Table 35, Table 36 and Table 37. This signal is the same as the PC Card Memory Mode signal. In the True IDE Mode, -CS0 is the address range select for the task file registers while -CS1 is used to select the Alternate Status Register and the Device Control Register. While –DMACK is asserted, -CS0 and –CS1 shall be held negated and the width of the transfers shall be 16 bits. -CSEL (PC Card Memory Mode) -CSEL (PC Card I/O Mode) -CSEL (True IDE Mode) I 39 This signal is not used for this mode, but should be connected by the host to PC Card A25 or grounded by the host. This signal is not used for this mode, but should be connected by the host to PC Card A25 or grounded by the host. This internally pulled up signal is used to configure this device as a Master or a Slave when configured in the True IDE Mode. When this pin is grounded, this device is configure d as a Master. When the pin is open, this device is configured as a Slave. D15 - D00 (PC Card Memory Mode) D15 - D00 (PC Card I/O Mode) D15 - D00 (True IDE Mode) I/O 31,30,29,28, 27,49,48,47, 6,5,4,3,2, 23, 22, 21 These lines carry the Data, Commands and Status information between the host and the controller. D00 is the LSB of the Even Byte of the Word. D08 is the LSB of the Odd Byte of the Word. This signal is the same as the PC Card Memory Mode signal. In True IDE Mode, all Task File operations occur in byte mode on the low order bus D[7:0] while all data transfers are 16 bit using D[15:0]. GND (PC Card Memory Mode) GND (PC Card I/O Mode) GND (True IDE Mode) -- 1,50 Ground. This signal is the same for all modes. This signal is the same for all modes.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Signal Name Dir. Pin Description -INPACK (PC Card Memory Mode) -INPACK (PC Card I/O Mode) Input Acknowledge DMARQ (True IDE Mode) O 43 This signal is not used in this mode. The Input Acknowledge signal is asserted by the CompactFlash Storage Card when the card is selected and responding to an I/O read cycle at the address that is on the address bus. This signal is used by the host to control the enable of any input data buffers between the CompactFlash Sto rage Card and the CPU. This signal is a DMA Request that is used for DMA data transfers between host and device. It shall be asserted by the device when it is ready to tr ansfer data to or from the host. For Multiword DMA transfers, the direction of data transfer is controlled by -IORD and -IOWR. This signal is used in a handshake manner with -DMACK, i.e., the device shall wait until the host asserts -DMACK before negating DMARQ, and reasserting DMARQ if there is more data to transfer. DMARQ shall not be driven when the device is not selected. While a DMA operation is in progress, -CS0 and –CS1 shall be held negated and the width of the transfers shall be 16 bits. If there is no hardware support for DMA mode in the host, this output signal is not used and should not be connected at the host. In this case, the BIOS must report that DMA mode is not supported by the host so that device drivers will not attempt DMA mode. A host that does not support DMA mode and implements both PCMCIA and True-IDE modes of operation need not alter the PCMCIA mode connections while in True-IDE mode as long as this does not prevent proper operation in any mode. -IORD (PC Card Memory Mode) -IORD (PC Card I/O Mode) -IORD (True IDE Mode – Except Ultra DMA Protocol Active) -HDMARDY (True IDE Mode – In Ultra DMA Protocol DMA Read) HSTROBE (True IDE Mode – In Ultra DMA Protocol DMA Write) I 34 This signal is not used in this mode. This is an I/O Read strobe generated by the host. This signal gates I/O data onto the bus from the CompactFlash Storage Card when the card is configured to use the I/O interface. In True IDE Mode, while Ultra DMA mode is not active, this signal has the same function as in PC Card I/O Mode. In True IDE Mode when Ultra DMA mode DMA Read is active, this signal is asserted by the host to indicate that the host is read to receive Ultra DMA data- in bursts. The host may negate -HDMARDY to pause an Ultra DMA transfer. In True IDE Mode when Ultra DMA mode DMA Write is active, this signal is the data out strobe generated by the host. Both the rising and falling edge of HSTROBE cause data to be latched by the device. The host may stop generating HSTROBE edges to pause an Ultra DMA data-out burst.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Signal Name Dir. Pin Description -IOWR (PC Card Memory Mode) -IOWR (PC Card I/O Mode) -IOWR (True IDE Mode – Except Ultra DMA Protocol Active) STOP (True IDE Mode – Ultra DMA Protocol Active) I 35 This signal is not used in this mode. The I/O Write strobe pulse is used to clock I/O dat a on the Card Data bus into the CompactFlash Storage Card controller registers when the CompactFlash Storage Card is configured to use the I/O interface . The clocking shall occur on the negative to positive edge of the signal (trailing edge). In True IDE Mode, while Ultra DMA mode protocol is not active, this signal has the same function as in PC Card I/O Mode. When Ultr a DMA mode protocol is supported, this signal must be negated before enter ing Ultra DMA mode protocol. In True IDE Mode, while Ultra DMA mode protocol is active, the assertion of this signal causes the termination of the Ultra DMA burst. -OE (PC Card Memory Mode) -OE (PC Card I/O Mode) -ATA SEL (True IDE Mode) I 9 This is an Output Enable strobe generated by the host interface. It is used to read data from the CompactFlash Storage Card in Memory Mode and to read the CIS and configuration registers. In PC Card I/O Mode, this signal is used to read the CIS and configuration registers. To enable True IDE Mode this input should be grounded by the host. READY (PC Card Memory Mode) -IREQ (PC Card I/O Mode) INTRQ (True IDE Mode) O 37 In Memory Mode, this signal is set high when the CompactFlash Storage Card is ready to accept a new data transfer operation and is held low when the card is busy. At power up and at Reset, the READY signal is held low (busy) until the CompactFlash Storage Card has completed its power up or reset function. No access of any type should be made to the CompactFlash Storage Card during this time. Note, however, that when a card is powered up and u sed with RESET continuously disconnected or asserted, the Reset fu nction of the RESET pin is disabled. Consequently, the continuous assertion of RE SET from the application of power shall not cause the READY signal to remain continuously in the busy state. I/O Operation – After the CompactFlash Storage Card Card has been configured for I/O operation, this signal is used as -Interrupt Request. This li ne is strobed low to generate a pulse mode interrupt or held low for a level mode interrupt. In True IDE Mode signal is the active high Interrupt Request to the host.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Signal Name Dir. Pin Description -REG (PC Card Memory Mode) Attribute Memory Select -REG (PC Card I/O Mode) I 44 This signal is used during Memory Cycles to distinguish between Common Memory and Register (Attribute) Memory accesses. High for Common Memory, Low for Attribute Memory. The signal shall also be active (low) during I/O Cycles when the I/O address is on the Bus. -DMACK (True IDE Mode) This is a DMA Acknowledge signal that is asserted by the host in response to DMARQ to initiate DMA transfers. While DMA operations are not active, the card shall ignore the - DMACK signal, including a floating condition. If DMA operation is not supported by a True IDE Mode only host, this signal should be driven high or connected to VCC by the host. A host that does not support DMA mode and implements both PCMCIA and True-IDE modes of operation need not alter the PCMCIA mode connections while in True-IDE mode as long as this does not prevent proper operation all modes. RESET (PC Card Memory Mode) RESET (PC Card I/O Mode) -RESET (True IDE Mode) I 41 The CompactFlash Storage Card is Reset when the RESET pin is high with the following important exception: The host may leave the RESET pin open or keep it continually high from the application of power without causing a continuous Reset of the card. Under either of these conditions, the card shall emerge f rom power-up having completed an initial Reset. The CompactFlash Storage Card is also Reset when the Soft Reset bit in the Card Configuration Option Register is set. This signal is the same as the PC Card Memory Mode signal. In the True IDE Mode, this input pin is the active low hardware reset from the host. VCC (PC Card Memory Mode) VCC (PC Card I/O Mode) VCC (True IDE Mode) -- 13,38 +5 V, +3.3 V power. This signal is the same for all modes. This signal is the same for all modes.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Signal Name Dir. Pin Description -VS1 -VS2 (PC Card Memory Mode) -VS1 -VS2 (PC Card I/O Mode) -VS1 -VS2 (True IDE Mode) O 33 Voltage Sense Signals. -VS1 is grounded on the Card and sensed by the Host so that the CompactFlash Storage Card CIS can be read at 3.3 volts and - VS2 is reserved by PCMCIA for a secondary voltage and is not connected on the Card. This signal is the same for all modes. This signal is the same for all modes. -WAIT (PC Card Memory Mode) -WAIT (PC Card I/O Mode) IORDY (True IDE Mode – Except Ultra DMA Mode) -DDMARDY (True IDE Mode – Ultra DMA Write Mode) DSTROBE (True IDE Mode – Ultra DMA Read Mode) O 42 The -WAIT signal is driven low by the CompactFla sh Storage Card to signal the host to delay completion of a memory or I/O cycle that is in progress. This signal is the same as the PC Card Memory Mode signal. In True IDE Mode, except in Ultra DMA modes, this output signal may be used as IORDY. In True IDE Mode, when Ultra DMA mode DMA Write is active, this signal is asserted by the host to indicate that the device is read to receive Ultra DMA data-in bursts. The device may negate -DDMARDY to pause an Ultra DMA transfer. In True IDE Mode, when Ultra DMA mode DMA Write is active, this signal is the data out strobe generated by the device. Both the rising and falling edge of DSTROBE cause data to be latched by the host. The device may stop generating DSTROBE edges to pause an Ultra DMA data-out burst. -WE (PC Card Memory Mode) -WE (PC Card I/O Mode) -WE (True IDE Mode) I 36 This is a signal driven by the host and used for strobing memory write data to the registers of the CompactFlash Storage Card when the card is configured in the memory interface mode. It is also used for writing the configuration registers. In PC Card I/O Mode, this signal is used for writing the configuration registers. In True IDE Mode, this input signal is not used and should be connected to VCC by the host.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 WP (PC Card Memory Mode) Write Protect -IOIS16 (PC Card I/O Mode) -IOCS16 (True IDE Mode) O 24 Memory Mode – The CompactFlash Storage Card does not have a write protect switch. This signal is held low after the completion of the reset initialization sequence. I/O Operation – When the CompactFlash Storage Card is configured for I/O Operation Pin 24 is used for the -I/O Selected is 16 Bit Port (- IOIS16) function. A Low signal indicates that a 16 bit or odd byte only operation can be performed at the addressed port. In True IDE Mode this output signal is asserted low when this device is e xpecting a word data transfer cycle. Electrical Specification The following tables indicate all D.C. Characteristics for the CompactFlash Storage Card. Unless otherwise stated, conditions are: Vcc = 5V ±10% Vcc = 3.3V ± 5% /square6 Absolute Maximum Conditions /square6 Input Power /square6 Input Leakage Current /square6 Input Characteristics CompactFlash interface I/O at 5.0V Parameter Symbol Min. Max. Unit Remark

4.0 V Non-schmitt trigger High level input voltage V IH

2.92 V Schmitt trigger 1

0.8 V Non-schmitt trigger Low level input voltage V IL

1.70 V Schmitt trigger 1

Pull up resistance 2 R PU 50. 73 kOhm Pull down resistance R PD 50 97 kOhm CompactFlash interface I/O at 3.3V Parameter Symbol Min. Max. Unit Remark Supply Voltage VCC 2.97 3.63 V High level output voltage V OH V CC -0.8 V Low level output voltage V OL 0.8 V

2.4 V Non-schmitt trigger High level input voltage V IH

2.05 V Schmitt trigger 1

0.6 V Non-schmitt trigger Low level input voltage V IL

1.25 V Schmitt trigger 1

Pull up resistance 2 R PU 52.7 141 kOhm Pull down resistance R PD 47.5 172 kOhm The I/O pins other than CompactFlash interface Parameter Symbol Min. Max. Unit Remark Supply Voltage VCC 2.7 3.6 V High level output voltage V OH 2.4 V Low level output voltage V OL 0.4 V

2.0 V Non-schmitt trigger High level input voltage V IH

1.4 2.0 V Schmitt trigger 0.8 1.2 V Schmitt trigger Pull up resistance R PU 40 kOhm Pull down resistance R PD 40 kOhm 1. Include CE1, CE2, HREG, HOE. HIOE, HWE, HIOW pins. 2. Include CE1, CE2, HREG, HOE. HIOE, HWE, HIOW, CSEL, PDIAG, DASP pins.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /square6 Signal Interface

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Notes: 1) Control Signals: each card shall present a load to the socket no larger than 50 pF 10 at a DC current of 700 μ A low state and 150 μ A high state, including pull-resistor. The socket shall be able to drive at least the following load 10 while meeting all AC timing requirements: (the number of sockets wired in parallel) multiplied by (50 pF with DC current 700 μ A low state and 150 μ A high state per socket). 2) Resistor is optional. 3) Status Signals: the socket shall present a load to the card no larger than 50 pF 10 at a DC current of 400 μ A low state and 100 μ A high state, including pull-up resistor. The card shall be able to drive at least the following load 10 while meeting all AC timing requirements: 50 pF at a DC current of 400 μ A low state and 100 μ A high state. 4) Status Signals: the socket shall present a load to the card no larger than 50 pF 10 at a DC current of 400 μ A low state and 100 μ A high state, including pull-up resistor. The card shall be able to drive at least the following load 10 while meeting all AC timing requirements: 50 pF at a DC current of 400 μ A low state and 100 μ A high state. 5) Status Signals: the socket shall present a load to the card no larger than 50 pF 10 at a DC current of 400 μ A low state and 100 μ A high state, including pull-up resistor. The card shall be able to drive at least the following load 10 while meeting all AC timing requirements: 50 pF at a DC current of 400 μ A low state and 1100 μ A high state. 6) BVD2 was not defined in the JEIDA 3.0 release. Systems fully supporting JEIDA release 3 SRAM cards shall pull-up pin 45 (BVD2) to avoid sensing their batteries as “Low.” 7) Address Signals: each card shall present a load of no more than 100pF 10 at a DC current of 450 μ A low state and 150 μ A high state. The host shall be able to drive at least the following load 10 while meeting all AC timing requirements: (the number of sockets wired in parallel) multiplied by (100pF with DC current 450 μ A low state and 150 μ A high state per socket). 8) Data Signals: the host and each card shall present a load no larger than 50pF 10 at a DC current of 450 μ A and 150 μ A high state. The host and each card shall be able to drive at least the following load 10 while meeting all AC timing requirements: 100pF with DC current 1.6mA low state and 300 μ A high state. This permits the host to wire two sockets in parallel without derating the card access speeds. 9) Reset Signal: This signal is pulled up to prevent the input from floating when a CFA to PCMCIA adapter is used in a PCMCIA revision 1 host. However, to minimize DC current drain through the pull-up resistor in normal operation the pull-up should be turned off once the Reset signal has been actively driven low by the host. Consequently, the input is specified as an I2Z because the resistor is not necessarily detectable in the input current leakage test. 10) Host and card restrictions for CF Advanced Timing Modes and Ultra DMA modes: Additional Requirements for CF Advanced Timing Modes and Ultra DMA Electrical Requirements for additional required limitations on the implementation of CF Advanced Timing modes and Ultra DMA modes respectively. /square6 Additional Requirements for CF Advanced Timing Mode s The CF Advanced Timing modes include PCMCIA I/O and Memory modes that are 100ns or faster and True IDE PIO Modes 5,6 and Multiword DMA Modes 3,4. When operating in CF Advanced timing modes, the hos t shall conform to the following requirements: 1) Only one CF device shall be attached to the CF B us. 2) The host shall not present a load of more than 4 0pF to the device for all signals, including any cabling. 3) The maximum cable length is 0.15 m (6 in). The c able length is measured from the card connector to the host controller. 0.46 m (18 in) cables are not supported. 4) The -WAIT and IORDY signals shall be ignored by the host. Devices supporting CF Advanced timing modes shall also support slower timing modes, to ensure operability with systems that do not support CF Advanced timing modes

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /square6 Ultra DMA Electrical Requirements /head2right Host and Card signal capacitance limits for Ultra DMA operation The host interface signal capacitance at the host connector shall be a maximum of 25 pF for each signal as measured at 1 MHz. The card interface signal capacitance at the card connector shall be a maximum of 20 pF for each signal as measured at 1 MHz. /head2right Series termination required for Ultra DMA operation Series termination resistors are required at both the host and the card for operation in any of the Ultra DMA modes. Table 13 describes typical values for series termination at the host and the device. Table: Typical Series Termination for Ultra DMA Signal

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /head2right Printed Circuit Board (PCB) Trace Requirements for Ultra DMA On any PCB for a host or device supporting Ultra DMA: /checkbld The longest D[15:00] trace shall be no more than 0 .5" longer than either STROBE trace as measured from the IC pin to the connector. /checkbld The shortest D[15:00] trace shall be no more than 0.5" shorter than either STROBE trace as measured from the IC pin to the connector. /head2right Ultra DMA Mode Cabling Requirement /checkbld Operation in Ultra DMA mode requires a crosstalk suppressing cable. The cable shall have a grounded line between each signal line. /checkbld For True IDE mode operation using a cable with IDE (ATA) type 40 pin connectors it is recommended that the host sense the cable type using the method described in the ANSI INCITS 361-2002 AT Attachment - 6 standard, to prevent use of Ultra DMA with a 40 conductor cable. Table: Ultra DMA Termination with Pull-up or Pull down Example

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Notes: 1) All timing measurement switching points (low to high and high to low) shall be taken at 1.5 V. 2) All signal transitions for a timing parameter sh all be measured at the connector specified in the measurement location column. For example, in the ca se of tRFS, both STROBE and –DMARDY transitions are measured at the sender connector. 3) The parameter tCYC shall be measured at the recipient’s connector farthest from the sender. 4)The parameter tLI shall be measured at the connector of the sender or recipient that is responding to an incoming transition from the recipient or sender respectively. Both the incoming signal and the outgoing response shall be measured at the same connector. 5)The parameter tAZ shall be measured at the connector of the sender or recipient that is driving the bus but must release the bus the allow for a bus turnaround.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Notes: 1) The parameters tUI, tMLI : (Ultra DMA Dat a-In Burst Device Termination Timing and Ultra DMA Data-In Burst Host Termination Timing), and tLI ind icate sender-to-recipient or recipient-to-sender interlocks, i.e., one agent (either sender or recip ient) is waiting for the other agent to respond wit h a signal before proceeding. tUI is an unlimited inter lock that has no maximum time value. tMLI is a limited time-out that has a defined minimum. tLI is a limited time-out that has a defined maximum. 2) 80-conductor cabling shall be required in order to meet setup (tDS, tCS) and hold (tDH, tCH) times in modes greater than 2. 3) Timing for tDVS, tDVH, tCVS and tCVH shall be met for lumped capacitive loads of 15 and 40 pF at the connector where the Data and STROBE signals hav e the same capacitive load value. Due to reflections on the cable, these timing measurements are not valid in a normally functioning system. 4)For all modes the parameter tZIORDY may be greater than tENV due to the fact that the host has a pull-up on IORDY- giving it a known state when released. 5)The parameters tDS, and tDH for mode 5 are defined for a recipient at the end of the cable only in a configuration with a single device located at the e nd of the cable. This could result in the minimum values for tDS and tDH for mode 5 at the middle connector being 3.0 and 3.9 ns respectively. 6)The parameters are applied to True IDE mode operationonly. Notes: 1) All timing measurement switching points(low to high and high to low) shall be taken at 1.5 V. 2) The correct data value shall be captured by the recipient given input data with a slew rate of 0.4 V/ns rising and falling and the input STROBE with a slew rate of 0.4 V/ns rising and falling at tDSIC and tDHIC timing (as measured through 1.5 V). 3) The parameters tDVSIC and tDVHIC shall be met fo r lumped capacitive loads of 15 and 40 pF at the IC where all signals have the same capacitive l oad value. Noise that may couple onto the output signals from external sources has not been included in these values. Table: Ultra DMA Sender and Recipient IC Timing Requirements

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Note: 1) The sender shall be tested while driving a n 18 inch long, 80 conductor cable with PVC insulat ion material. The signal under test shall be cut at a t est point so that it has not trace, cable or recipi ent loading after the test point. All other signals should remain connected through to the recipient. The test point may be located at any point between the sender’s series termination resistor and one half inch or less of conductor exiting the connector. If the test point is on a cable conductor rather than the PCB, an adjacent ground conductor shall also be cut within one half inch of the connector. The test load and test points should then be soldered directly to the exposed source side connectors. The test loads consist of a 15 pF or a 40 pF, 5%, 0.08 inch by 0.05 inch surface mount or smaller size capacitor from the test point to ground. Slew rates shall be met for both capacitor values. Measurements shall be taken at the test point using a <1 pF, >100 Kohm, 1 Ghz or faster probe and a 500 MHz or faster oscilloscope. The average rate shall be measured from 20% to 80% of the settled VOH level with data transitions at least 120 nsec a part. The settled VOH level shall be measured as the average output high level under the defined testing conditions from 100 nsec after 80% of a rising edge until 20% of the subsequent falling edge. Table: Ultra DMA Sender and Recipient IC Timing Requirements

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Card Configuration The CompactFlash Storage Cards is identified by appropriate information in the Card Information Structure (CIS). The following configuration registers are used to c oordinate the I/O spaces and the Interrupt level of cards that are located in the system. In addition, these regis ters provide a method for accessing status informat ion about the CompactFlash Storage Card that may be used to a rbitrate between multiple interrupt sources on the same interrupt level or to replace status information th at appears on dedicated pins in memory cards that h ave alternate use in I/O cards. /square6 Multiple Function CompactFlash Storage Cards Table: CompactFlash Storage Card Configuration Registers Decoding Table: CompactFlash Storage Card Registers and Memory Space Decoding

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /square6 Attribute Memory Function Attribute memory is a space where CompactFlash Stor age Card identification and configuration informati on are stored, and is limited to 8 bit wide accesses only at even addresses. The card configuration registers are also located here. For CompactFlash Storage Cards, the base address of the ard configuration register s is 200h. Table 31: Attribute Memory Function

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 I/O Transfer Function The I/O transfer to or from the CompactFlash Storage can be either 8 or 16 bits. When a 16 bit accessible port is addressed, the signal -IOIS16 is asserted by the CompactFlash Storage. Otherwise, the -IOIS16 signa l is de-asserted. When a 16 bit transfer is attempted, and the -IOIS16 signal is not asserted by the CompactFlash Storage, the system shall generate a pair of 8 bit references to access the word‘s even byte and odd byte. The CompactFlash Storage Card permits both 8 and 16 bit accesses to all of its I/O addresses, so -IOIS16 i s asserted for all addresses to which the CompactFlas h Storage responds. The CompactFlash Storage Card may request the host to extend the length of an input cycle until data is ready by asserting the -WAIT signal at the start of the cycle. Table : PCMCIA Mode I/O Function

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Common Memory Transfer Function The Common Memory transfer to or from the CompactFlash Storage can be either 8 or 16 bits. Table: Common Memory Function

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 True IDE Mode I/O Transfer Function The CompactFlash Storage Card can be configured in a True IDE Mode of operation. The CompactFlash Storage Card is configured in this mode only when the -OE i nput signal is grounded by the host during the powe r off to power on cycle. Optionally, CompactFlash Storage Cards may support the following optional detection methods: 1. The card is permitted to monitor the –OE (-ATA S EL) signal at any time(s) and switch to PCMCIA mode upon detecting a high level on the pin. 2. The card is permitted to re-arbitrate the interface mode determination following a transition of the (-)RESET pin. 3. The card is permitted to monitor the –OE (-ATA S EL) signal at any time(s) and switch to True IDE mo de upon detection of a continuous low level on pin for an extended period of time. Table: True IDE Mode I/O Function defines the function of the operations for the True IDE Mode.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Metaformat Overview The goal of the Metaformat is to describe the requirements and capabilities of the CompactFlash Storage Card as thoroughly as possible. This includes describing the power requirements, IO requirements, memory requirements, manufacturer information and details about the services provided. Table: Sample Device Info Tuple Information for Extended Speeds Note: The value “1” defined for D3 of the N+0 words indicates that no write-protect switch controls writing the ATA registers. The value “0” defined for D7 in the N+2 words indicates that there is not more than a singl e speed extension byte.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 CF-ATA Drive Register Set Definition and Protocol The CompactFlash Storage Card can be configured as a high performance I/O device through: a) The standard PC-AT disk I/O address spaces 1F0h-1F7h, 3F6h-3F7h (primary) or 170h- 177h, 376h-377h (secondary) with IRQ 14 (or other available IRQ). b) Any system decoded 16 byte I/O block using any available IRQ. c) Memory space. The communication to or from the CompactFlash Stora ge Card is done using the Task File registers, whic h provide all the necessary registers for control and status information related to the storage medium. The PCMCIA interface connects peripherals to the host using four register mapping methods. Table 39 is a detailed description of these methods:

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /square6 Contiguous I/O Mapped Addressing When the system decodes a contiguous block of I/O registers to select the CompactFlash Storage Card, the registers are accessed in the block of I/O space decoded by the system as follows: Table: Contiguous I/O Decoding

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /square6 Memory Mapped Addressing When the CompactFlash Storage Card registers are accessed via memory references, the registers appear in the common memory space window: 0-2K bytes as follows: /square6 True IDE Mode Addressing When the CompactFlash Storage Card is configured in the True IDE Mode, the I/O decoding is as follows:

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /square6 CF-ATA Registers The following section describes the hardware registers used by the host software to issue commands to the CompactFlash device. These registers are often collectively referred to as the “task file.” /head2right Data Register (Address - 1F0h[170h];Offset 0,8,9) The Data Register is a 16 bit register, and it is used to transfer data blocks between the CompactFlash Storage Card data buffer and the Host. This register overlaps the Error Register. Error Register (Address - 1F1h[171h]; Offset 1, 0Dh Read Only) This register contains additional information about the source of an error when an error is indicated in bit 0 of the Status register. This register is also accessed in PC Card Modes on data bits D15-D8 during a read operation to offset 0 with -CE2 low and -CE1 high. Bit 7 (BBK/ICRC) : this bit is set when a Bad Block is detected. This bit is also set when an interface CRC error is detected in True IDE Ultra DMA modes of operation. Bit 6 (UNC) : this bit is set when an Uncorrectable Error is encountered. Bit 5 : this bit is 0. Bit 4 (IDNF) : the requested sector ID is in error or cannot be found. Bit 3 : this bit is 0. Bit 2 (Abort) This bit is set if the command has been aborted bec ause of a CompactFlash Storage Card status condition: (Not Ready, Write Fault, etc.) or when an invalid command has been issued. Bit 1 This bit is 0. Bit 0 (AMNF) This bit is set in case of a general error.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /head2right Feature Register (Address - 1F1h[171h]; Offset 1, 0Dh Write Only) This register provides information regarding featur es of the CompactFlash Storage Card that the host c an utilize. This register is also accessed in PC Card modes on data bits D15-D8 during a write operation to Offset 0 with -CE2 low and -CE1 high. /head2right Sector Count Register (Address - 1F2h[172h]; Offset 2) This register contains the numbers of sectors of da ta requested to be transferred on a read or write operation between the host and the CompactFlash Storage Card. If the value in this register is zero, a count of 256 sectors is specified. If the command was successful, this register is zero at command completion. If not successfully completed, the register contains the number of sectors that need to be transferred in order to complete the request. /head2right Sector Number (LBA 7-0) Register (Address - 1F3h[173h]; Offset 3) This register contains the starting sector number o r bits 7-0 of the Logical Block Address (LBA) for a ny CompactFlash Storage Card data access for the subsequent command. /head2right 6.1.5.5 Cylinder Low (LBA 15-8) Register (Address - 1F4h[174h]; Offset 4) This register contains the low order 8 bits of the starting cylinder address or bits 15-8 of the Logic al Block Address. /head2right Cylinder High (LBA 23-16) Register (Address - 1F5h[175h]; Offset 5) This register contains the high order bits of the s tarting cylinder address or bits 23-16 of the Logic al Block Address. /head2right Drive/Head (LBA 27-24) Register (Address 1F6h[176h]; Offset 6) The Drive/Head register is used to select the drive and head. It is also used to select LBA addressing instead of cylinder/head/sector addressing. Bit 7: this bit is specified as 1 for backward comp atibility reasons. It is intended that this bit wil l become obsolete in a future revision of the specification. This bit is ignored by some controllers in some commands. Bit 6: LBA is a flag to select either Cylinder/Head /Sector (CHS) or Logical Block Address Mode (LBA). When LBA=0, Cylinder/Head/Sector mode is selected. When LBA=1, Logical Block Address is selected. In Logical Block Mode, the Logical Block Address is interpreted as follows: LBA7-LBA0: Sector Number Register D7-D0. LBA15-LBA8: Cylinder Low Register D7-D0. LBA23-LBA16: Cylinder High Register D7-D0. LBA27-LBA24: Drive/Head Register bits HS3-HS0. Bit 5: this bit is specified as 1 for backward comp atibility reasons. It is intended that this bit wil l become obsolete in a future revisions of the specification . This bit is ignored by some controllers in some commands. Bit 4 (DRV): DRV is the drive number. When DRV=0, drive (card) 0 is selected. When DRV=1, drive (card) 1 is selected. Setting this bit to 1 is obsolete in PCMCIA modes of operation. If the obsolete functionality is support by a CF Storage Card, the CompactFlash S torage Card is set to be Card 0 or 1 using the copy field (Drive #) of the PCMCIA Socket & Copy configuration register.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Bit 3 (HS3): when operating in the Cylinder, Head, Sector mode, this is bit 3 of the head number. It is Bit 27 in the Logical Block Address mode. Bit 2 (HS2): when operating in the Cylinder, Head, Sector mode, this is bit 2 of the head number. It is Bit 26 in the Logical Block Address mode. Bit 1 (HS1): when operating in the Cylinder, Head, Sector mode, this is bit 1 of the head number. It is Bit 25 in the Logical Block Address mode. Bit 0 (HS0): when operating in the Cylinder, Head, Sector mode, this is bit 0 of the head number. It is Bit 24 in the Logical Block Address mode. /head2right Status & Alternate Status Registers (Address 1F7h[177h]&3F6h[376h]; Offsets 7 & Eh) These registers return the CompactFlash Storage Card status when read by the host. Reading the Status register does clear a pending interrupt while reading the Auxiliary Status register does not. The status bits are described as follows: Bit 7 (BUSY): the busy bit is set when the CompactFlash Storage Card has access to the command buffer and registers and the host is locked out from accessing the command register and buffer. No other bits in this register are valid when this bit is set to a 1. During the data transfer of DMA commands, the Card shall not assert DMARQ unless either the BUSY bit, the DRQ bit, or both are set to one. Bit 6 (RDY): RDY indicates whether the device is ca pable of performing CompactFlash Storage Card operations. This bit is cleared at power up and remains cleared until the CompactFlash Storage Card is ready to accept a command. Bit 5 (DWF): This bit, if set, indicates a write fault has occurred. Bit 4 (DSC): This bit is set when the CompactFlash Storage Card is ready. Bit 3 (DRQ): The Data Request is set when the CompactFlash Storage Card requires that information be transferred either to or from the host through the Data register. During the data transfer of DMA commands, the Card shall not assert DMARQ unless either the BUSY bit, the DRQ bit, or both are set to one. Bit 2 (CORR): This bit is set when a Correctable data error has been encountered and the data has been corrected. This condition does not terminate a multi-sector read operation. Bit 1 (IDX): This bit is always set to 0. Bit 0 (ERR): This bit is set when the previous comm and has ended in some type of error. The bits in th e Error register contain additional information describing the error. It is recommended that media access commands (such as Read Sectors and Write Sectors) that end with an error condition should have the address of the first sector in error in the command block registers.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /head2right Device Control Register (Address - 3F6h[376h]; Offset Eh) This register is used to control the CompactFlash Storage Card interrupt request and to issue an ATA s oft reset to the card. This register can be written even if the device is BUSY. The bits are defined as follows: Bit 7: this bit is ignored by the CompactFlash Storage Card. The host software should set this bit to 0. Bit 6: this bit is ignored by the CompactFlash Storage Card. The host software should set this bit to 0. Bit 5: this bit is ignored by the CompactFlash Storage Card. The host software should set this bit to 0. Bit 4: this bit is ignored by the CompactFlash Storage Card. The host software should set this bit to 0. Bit 3: this bit is ignored by the CompactFlash Storage Card. The host software should set this bit to 0. Bit 2 (SW Rst): this bit is set to 1 in order to force the CompactFlash Storage Card to perform an AT Disk controller Soft Reset operation. This does not change the PCMCIA Card Configuration Registers as a hardware Reset does. The Card remains in Reset until this bit is reset to ‘0.’ Bit 1 (-IEn): the Interrupt Enable bit enables interrupts when the bit is 0. When the bit is 1, interrupts from the CompactFlash Storage Card are disabled. This bit also controls the Int bit in the Configuration and Status Register. This bit is set to 0 at power on and Reset. Bit 0: this bit is ignored by the CompactFlash Storage Card.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /head2right Card (Drive) Address Register (Address 3F7h[377h]; Offset Fh) This register is provided for compatibility with the AT disk drive interface. It is recommended that this register not be mapped into the host’s I/O space because of potential conflicts on Bit 7. Bit 7: this bit is unknown. Implementation Note: Conflicts may occur on the host data bus when this bit is provided by a Floppy Disk Controller operating at the same addresses as the CompactFlash Storage Card. Following are some possible solutions to this problem for the PCMCIA implementation: 1) Locate the CompactFlash Storage Card at a non-co nflicting address, i.e. Secondary address (377) or in an independently decoded Address Space when a Floppy Disk Controller is located at the Primary addresses. 2) Do not install a Floppy and a CompactFlash Stora ge Card in the system at the same time. 3) Implement a socket adapter that can be programme d to (conditionally) tri-state D7 of I/0 address 3F7h/377h when a CompactFlash Storage Card is insta lled and conversely to tristate D6-D0 of I/O address 3F7h/377h when a floppy controller is installed. 4) Do not use the CompactFlash Storage Card’s Drive Address register. This may be accomplished by either a) If possible, program the host adapter to enable only I/O addresses 1F0h-1F7h, 3F6h (or 170h-177h, 176h) to the CompactFlash Storage Ca rd or b) if provided use an additional Primary / Secondary configuration in the CompactFlash Storage Card which does not respond to accesses to I/O locations 3F7h and 377h. With either of these implementations, the host software shall not attempt to use information in the Drive Address Register. Bit 6 (-WTG): this bit is 0 when a write operation is in progress; otherwise, it is 1. Bit 5 (-HS3): this bit is the negation of bit 3 in the Drive/Head register. Bit 4 (-HS2): this bit is the negation of bit 2 in the Drive/Head register. Bit 3 (-HS1): this bit is the negation of bit 1 in the Drive/Head register. Bit 2 (-HS0): this bit is the negation of bit 0 in the Drive/Head register. Bit 1 (-nDS1): this bit is 0 when drive 1 is active and selected. Bit 0 (-nDS0): this bit is 0 when the drive 0 is active and selected.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 CF-ATA Command Set

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /square6 Request Sense - 03h The extended error code is returned to the host in the Error Register. /square6 Write Sector(s) without Erase - 38h

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /square6 Erase Sector(s) - C0h This command is used to pre-erase and condition dat a sectors in advance of a Write without Erase or Wr ite Multiple without Erase command. There is no data transfer associated with this command but a Write Fau lt error status can occur. /square6 Write Multiple without Erase – CDh /square6 Translate Sector - 87h

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Translate Sector Information

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /square6 Set Features – EFh Feature Supported Feature Operation 03h Set transfer mode based on calue in Sector Coun t register 81h Disable 8 bit data transfer 82h Disable Write Cache /square6 Execute Drive Diagnostic - 90h When the diagnostic command is issued in a PCMCIA c onfiguration mode, this command runs only on the CompactFlash Storage Card that is addressed by the Drive/Head register. This is because PCMCIA card interface does not allows for direct inter-drive communicatio n (such as the ATA PDIAG and DASP signals). When th e diagnostic command is issued in the True IDE Mode, the Drive bit is ignored and the diagnostic command is executed by both the Master and the Slave with the Master responding with status for both devices. Diagnostic Codes are returned in the Error Register at the end of the command.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /square6 Flush Cache – E7h This command causes the card to complete writing data from its cache. The card returns status with RDY =1 and DSC=1 after the data in the write cache buffer is written to the media. If the Compact Flash Storage Card does not support the Flush Cache command, the Compact Flash Storage Card shall return command aborted. /square6 Identify Device – ECh The Identify Device command enables the host to rec eive parameter information from the CompactFlash Storage Card. This command has the same protocol as the Read Sector(s) command. The parameter words in the buffer have the arrangement and meanings defined in Table as below. All reserved bits or words are zero. Hosts should not depend on Obsolete words in Identify Device containing 0. Table 47 specifies each field in the data returned by the Identify Device Command. In Table as below, X indicates a numeric nibble value specific to the card and aaaa indicates an ASCII string specific to the particular drive. /square6 Read DMA – C8h /square6 Read Multiple - C4h

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /square6 Write Multiple Command - C5h /square6 Write Sector(s) - 30h or 31h /square6 NOP - 00h This command always fails with the CompactFlash Storage Card returning command aborted.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /square6 Read Buffer - E4h The Read Buffer command enables the host to read the current contents of the CompactFlash Storage Card’s sector buffer. This command has the same protocol as the Read Sector(s) command. /square6 Write Buffer - E8h /square6 Check Power Mode - 98h or E5h If the CompactFlash Storage Card is in, going to, or recovering from the sleep mode, the CompactFlash Storage

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Card sets BSY, sets the Sector Count Register to 00h, clears BSY and generates an interrupt. If the CompactFlash Storage Card is in Idle mode, t he CompactFlash Storage Card sets BSY, sets the Sec tor Count Register to FFh, clears BSY and generates an interrupt. /square6 Idle - 97h or E3h This command causes the CompactFlash Storage Card t o set BSY, enter the Idle mode, clear BSY and generate an interrupt. If the sector count is non-zero, it is interpreted as a timer count with each count being 5 milliseconds and the automatic power down mode is enabled. If the sector count is zero, the automatic power down mode is disabled. Note that this time base (5 msec) is different from the ATA specification. /square6 Idle Immediate - 95h or E1h This command causes the CompactFlash Storage Card t o set BSY, enter the Idle mode, clear BSY and generate an interrupt. /square6 Set Sleep Mode- 99h or E6h

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /square6 Security Freeze Lock – F6h /square6 Format Track - 50h This command writes the desired head and cylinder o f the selected drive with a vendor unique data patt ern (typically FFh or 00h). To remain host backward com patible, the CompactFlash Storage Card expects a se ctor buffer of data from the host to follow the command with the same protocol as the Write Sector(s) comma nd although the information in the buffer is not used by the CompactFlash Storage Card. If LBA=1 then the number of sectors to format is taken from the Sec Cnt register (0=256). The use of this command is not recommended. /square6 Initialize Drive Parameters - 91h This command enables the host to set the number of sectors per track and the number of heads per cylinder. Only the Sector Count and the Card/Drive/Head registers are used by this command. /square6 Recalibrate - 1Xh

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /square6 ID Table Information of True IDE Mode Word Address Default Value Total Bytes Data Field Type Information 044Ah 2 General configuration - signature for the C ompactFlash Flash Storage Card 0XXX 2 General configuration – Bit Significant with ATA-4 definitions.

1 XXXXh 2 Default number of cylinders

3 00XXh 2 Default number of heads 4 0000h 2 Obsolete 5 0240h 2 Obsolete

6 XXXXh 2 Default number of sectors per track

7-8 XXXXh 4 Number of sectors per card (Word 7 = MS W, Word 8 = LSW) 9 0000h 2 Obsolete 10-19 aaaa 20 Serial number in ASCII (Right Justifi ed) 20 0000h 2 Obsolete 21 0002h 2 Obsolete 22 0004h 2 Number of ECC bytes passed on Read/Write Long Commands 23-26 aaaa 8 Firmware revision in ASCII. Big Endian Byte Order in Word 27-46 aaaa 40 Model number in ASCII (Left Justified ) Big Endian Byte Order in Word 47 8001h 2 Maximum number of sectors on Read/Write Multiple command 48 0000h 2 Reserved 49 0F00h 2 Capabilities 50 0000h 2 Reserved 51 0200h 2 PIO data transfer cycle timing mode 52 0000h 2 Obsolete 53 0007h 2 Field Validity

54 XXXXh 2 Current numbers of cylinders

55 XXXXh 2 Current numbers of heads

56 XXXXh 2 Current sectors per track

57-58 XXXXh 4 Current capacity in sectors (LBAs)(Wo rd 57 = LSW, Word 58 = MSW) 59 01XXh 2 Multiple sector setting 60-61 XXXXh 4 Total number of sectors addressable i n LBA Mode 62 0000h 2 Reserved 63 0007h 2 Multiword DMA transfer. In PC Card modes this value shall be 0h 64 0003h 2 Advanced PIO modes supported 65 0078h 2 Minimum Multiword DMA transfer cycle time per word. In PC Card modes this value shall be 0h 66 0078h 2 Recommended Multiword DMA transfer cycle time. In PC Card modes this value shall be 0h

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Word Address Default Value Total Bytes Data Field Type Information 67 0078h 2 Minimum PIO transfer cycle time without flow control 68 0078h 2 Minimum PIO transfer cycle time with IOR DY flow control 69-79 0000h 20 Reserved 80-81 0000h 4 Reserved – CF cards do not return an ATA version 82-84 702Bh 2 Command sets supported 83 500Ch 2 Command sets supported 84 4000h 2 Command sets supported 85-87 XXXXh 6 Features/command sets enabled 88 001Fh 2 Ultra DMA Mode Supported and Selected 89 0001h 2 Time required for Security erase unit co mpletion 90 0000h 2 Time required for Enhanced security eras e unit completion 91 0000h 2 Current Advanced power management value 92 0000h 2 Master Password Revision Code 604Fh 6F00h 603Fh - Hardware reset result (Master) - Hardware reset result (Slave) - Hardware reset result (Master w/ slave present) 94-127 0000h 68 Reserved 128 0001h 2 Security status 129-159 0000h 64 Vendor unique bytes 160 81F4h 2 Power requirement description 161 0000h 2 Reserved for assignment by the CFA 162 0000h 2 Key management schemes supported 163 0092h 2 CF Advanced True IDE Timing Mode Capabi lity and Setting 164 0000h 2 CF Advanced PC Card I/O and Memory Timi ng Mode Capability 165-175 0000h 22 Reserved 176-255 0000h 140 Reserved /head2right Word 0: General Configuration This field indicates the general characteristics of the device. When Word 0 of the Identify drive information is 848Ah then the device is a CompactFlash Storage Card and complies with the CFA specification and CFA command set. It is recommended that PCMCIA mode s of operation report only the 848Ah value as they are always intended as removable devices. Bits 15-0: CF Standard Configuration Value Word 0 is 848Ah. This is the recommended value of W ord 0. Some operating systems require Bit 6 of Word 0 to be set to 1 (Non-removable device) to use the card as the root storage device. The Card must be the root storage device when a host completely replaces conventional disk storage with a CompactFlash Card in True IDE mode. To support this requirement and provide capability for any future removable media Cards, alternatehandling of Word 0 is permitted. Bits 15-0: CF Preferred Alternate Configuration Values 044Ah: This is the alternate value of Word 0 turns on ATA device and turns off Removable Media and

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Removable Device while preserving all Retired bits in the word. 0040h: This is the alternate value of Word 0 turns on ATA device and turns off Removable Media and Removable Device while zeroing all Retired bits in the word Bit 15-12: Configuration Flag If bits 15:12 are set to 8h then Word 0 shall be 848Ah. If bits 15:12 are set to 0h then Bits 11:0 are set using the definitions below and the Card is require d to support for the CFA command set and report that in bit 2 of Word 83. Bit 15:12 values other than 8h and 0h are prohibited. Bits 11-8: Retired These bits have retired ATA bit definitions. It is recommended that the value of these bits be either the preferred value of 0h or the value of 4h that preserves the corresponding bits from the 848Ah CF signature value. Bit 7: Removable Media Device If Bit 7 is set to 1, the Card contains media that can be removed during Card operation. If Bit 7 is set to 0, the Card contains nonremovable media. Bit 6: Not Removable Controller and/or Device Alert! This bit will be considered for obsolescence in a future revision of this standard. If Bit 6 is set to 1, the Card is intended to be nonremovable during operation. If Bit 6 is set to 0, the Card is intended to be removable during operation. Bits 5-0: Retired/Reserved Alert! Bit 2 will be considered for definition in a future revision of this standard and shall be 0 at this time. Bits 5-1 have retired ATA bit definitions. Bit 2 shall be 0. Bit 0 is Reserved and shall be 0. It is recommended that the value of bits 5-0 be either the preferred value of 00h or the value of 0Ah that preserves the corresponding bits from the 848Ah CF signature value. /head2right Word 1: Default Number of Cylinders This field contains the number of translated cylinders in the default translation mode. This value will be the same as the number of cylinders. /head2right Word 3: Default Number of Heads This field contains the number of translated heads in the default translation mode. /head2right Word 6: Default Number of Sectors per Track This field contains the number of sectors per track in the default translation mode. /head2right Words 7-8: Number of Sectors per Card This field contains the number of sectors per CompactFlash Storage Card. This double word value is also the first invalid address in LBA translation mode. /head2right Words 10-19: Serial Number This field contains the serial number for this CompactFlash Storage Card and is right justified and padded with spaces (20h). /head2right Word 22: ECC Count This field defines the number of ECC bytes used on each sector in the Read and Write Long commands. This value shall be set to 0004h. /head2right Words 23-26: Firmware Revision This field contains the revision of the firmware for this product. /head2right Words 27-46: Model Number

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 This field contains the model number for this product and is left justified and padded with spaces (20h). /head2right Word 47: Read/Write Multiple Sector Count Bits 15-8 shall be the recommended value of 80h or the permitted value of 00h. Bits 7-0 of this word define the maximum number of sectors per block that the CompactFlash Storage Card supports for Read/Write Multiple commands. /head2right Word 49: Capabilities Bit 13: Standby Timer If bit 13 is set to 1 then the Standby timer is supported as defined by the IDLE command If bit 13 is set to 0 then the Standby timer operation is defined by the vendor. Bit 11: IORDY Supported If bit 11 is set to 1 then this CompactFlash Storage Card supports IORDY operation. If bit 11 is set to 0 then this CompactFlash Storage Card may support IORDY operation. Bit 10: IORDY may be disabled Bit 10 shall be set to 0, indicating that IORDY may not be disabled. Bit 9: LBA supported Bit 9 shall be set to 1, indicating that this CompactFlash Storage Card supports LBA mode addressing. CF devices shall support LBA addressing. Bit 8: DMA Supported If bit 8 is set to 1 then Read DMA and Write DMA commands are supported. Bit 8 shall be set to 0. Read/Write DMA commands are not currently permitted on CF cards. /head2right PIO Data Transfer Cycle Timing Mode The PIO transfer timing for each CompactFlash Storage Card falls into modes that have unique parametric timing specifications. The value returned in Bits 15-8 shall be 00h for mode 0, 01h for mode 1, or 02h for mode 2. Values 03h through FFh are reserved. /head2right Translation Parameters Valid Bit 0 shall be set to 1 indicating that words 54 to 58 are valid and reflect the current number of cyl inders, heads and sectors. If bit 1 of word 53 is set to 1, the values in words 64 through 70 are valid. If th is bit is cleared to 0, the values reported in words 64-70 ar e not valid. Any CompactFlash Storage Card that supports PIO mode 3 or above shall set bit 1 of word 53 to one and support the fields contained in words 64 through 70. /head2right Current Number of Cylinders, Heads, Sectors/Track These fields contains the current number of user addressable Cylinders, Heads, and Sectors/Track in the current translation mode. /head2right Current Capacity This field contains the product of the current cylinders times heads times sectors. /head2right Multiple Sector Setting Bits 15-9 are reserved and shall be set to 0. Bit 8 shall be set to 1 indicating that the Multiple Sector Setting is valid. Bits 7-0 are the current setting for the number of sectors that shall be transferred per interrupt on Read/Write Multiple commands. /head2right Total Sectors Addressable in LBA Mode This field contains the total number of user addres sable sectors for the CompactFlash Storage Card in LBA mode only. /head2right Multiword DMA transfer Bits 15 through 8 of word 63 of the Identify Device parameter information is defined as the Multiword DMA mode selected field. If this field is supported, bit 1 of word 53 shall be set to one. This field is bit significant. Only one of bits may be set to one in this field by the CompactFlash Storage Card to indicate the multiword DMA mode which is currently selected. Of these bits, bits 15 through 11 are reserved. Bit 8, if set to one,

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 indicates that Multiword DMA mode 0 has been selected. Bit 9, if set to one, indicates that Multiword DMA mode 1 has been selected. Bit 10, if set to one, indicates that Multiword DMA mode 2 has been selected. Selection of Multiword DMA modes 3 and above are specific to CompactFlash are reported in word 163, Word 163: CF Advanced True IDE Timing Mode Capabilities and Settings. Bits 7 through 0 of word 63 of the Identify Device parameter information is defined as the Multiword DMA data transfer supported field. If this field is supported, bit 1 of word 53 shall be set to one. This field is bit significant. Any number of bits may be set to one in this field by the CompactFlash Storage Card to indicate the Multiword DMA modes it is capable of supporting. Of these bits, bits 7 through 2 are reserved. Bit 0 , if set to one, indicates that the CompactFlash St orage Card supports Multiword DMA mode 0. Bit 1, if set to one, indicates that the CompactFlash Storage Card supports Multiword DMA modes 1 and 0. Bit 2, if set to one, indicates that the CompactFlash Storage Card supports Multiword DMA modes 2, 1 and 0. Support for Multiword DMA modes 3 and above are specific to CompactFlash are reported in word 163, Word 163: CF Advanced True IDE Timing Mode Capabilities and Settings. /head2right Word 64: Advanced PIO transfer modes supported Bits 7 through 0 of word 64 of the Identify Device parameter information is defined as the advanced PI O data transfer supported field. If this field is supported, bit 1 of word 53 shall be set to one. This field is bit significant. Any number of bits may be set to one in this field by the CompactFlash Storage Card to indicate the advanced PIO modes it is capable of supporting. Of these bits, bits 7 through 2 are reserved. Bit 0 , if set to one, indicates that the CompactFlash St orage Card supports PIO mode 3. Bit 1, if set to one, indicates that the CompactFlash StorageCard supports PIO mode 4. Support for PIO modes 5 and above are specific to CompactFlash are reported in word 163. /head2right Word 65: Minimum Multiword DMA transfer cycle time Word 65 of the parameter information of the Identif y Device command is defined as the minimum Multiword DMA transfer cycle time. This field defin es, in nanoseconds, the minimum cycle time that, if used by the host, the CompactFlash Storage Card guarantees data integrity during the transfer. If this field is supported, bit 1 of word 53 shall be set to one. The value in word 65 shall not be less than the minimum cycle time for the fastest DMA mode supported by the device. This field shall be supported by all CompactFlash Storage Cards supporting DMA modes 1 and above. If bit 1 of word 53 is set to one, but this field is not supported, the Card shall return a value of zero in this field. /head2right Recommended Multiword DMA transfer cycle time Word 66 of the parameter information of the Identif y Device command is defined as the recommended Multiword DMA transfer cycle time. This field defin es, in nanoseconds, the cycle time that, if used by the host, may optimize the data transfer from by reducing the probability that the CompactFlash Storage Card will need to negate the DMARQ signal during the transfer of a sector. If this field is supported, bit 1 of word 53 shall be set to one. The value in word 66 shall not be less than the value in word 65. This field shall be supported by all CompactFlash Storage Cards supporting DMA modes 1 and above. If bit 1 of word 53 is set to one, but this field is not supported, the Card shall return a value of zero in this field. /head2right Word 67: Minimum PIO transfer cycle time without fl ow control Word 67 of the parameter information of the Identif y Device command is defined as the minimum PIO transfer without flow control cycle time. This field defines, in nanoseconds, the minimum cycle time that, if used by the host, the CompactFlash Storage Card gua rantees data integrity during the transfer without utilization of flow control. If this field is supported, Bit 1 of word 53 shall be set to one. Any CompactFlash Storage Card that supports PIO mode 3 or above shall support this field, and the value in word 67 shall not be less than the value reported in word 68. If bit 1 of word 53 is set to one because a CompactFlash Storage Card supports a field in words 64-70 other than this field and the CompactFlash Storage Card does not support this field, the CompactFlash Storage Card shall return a value of zero in this field.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /head2right Word 68: Minimum PIO transfer cycle time with IORDY Word 68 of the parameter information of the Identif y Device command is defined as the minimum PIO transfer with IORDY flow control cycle time. This f ield defines, in nanoseconds, the minimum cycle tim e that the CompactFlash Storage Card supports while performing data transfers while utilizing IORDY flow control. If this field is supported, Bit 1 of word 53 shall be set to one. Any CompactFlash Storage Card that supports PIO mode 3 or above shall support this field, and the value in word 68 shall be the fastest defined PIO mode supported by the CompactFlash Storage Card . If bit 1 of word 53 is set to one because a CompactFlash Storage Card supports a field in words 64-70 other than this field and the CompactFlash Storage Card does not support this field, the Compa ctFlash Storage Card shall return a value of zero i n this field. /head2right Words 82-84: Features/command sets supported Words 82, 83, and 84 shall indicate features/comman d sets supported. The value 0000h or FFFFh was placed in each of these words by CompactFlash Storage Cards prior to ATA-3 and shall be interpreted by the host as meaning that features/command sets supported are not indicated. Bits 1 through 13 of word 83 and bits 0 through 13 of word 84 are reserved. Bit 14 of word 83 and word 84 shall be set to one and bit 15 of word 83 and word 84 shall be cleared to zero to provide indication that the features/command sets supported words are valid. The values in these words should not be depended on by host implementers. Bit 0 of word 82 shall be set to zero; the SMART feature set is not supported. If bit 1 of word 82 is set to one, the Security Mode feature set is supported. Bit 2 of word 82 shall be set to zero; the Removable Media feature set is not supported. Bit 3 of word 82 shall be set to one; the Power Management feature set is supported. Bit 4 of word 82 shall be set to zero; the Packet Command feature set is not supported. If bit 5 of word 82 is set to one, write cache is supported. If bit 6 of word 82 is set to one, look-ahead is supported. Bit 7 of word 82 shall be set to zero; release interrupt is not supported. Bit 8 of word 82 shall be set to zero; Service interrupt is not supported. Bit 9 of word 82 shall be set to zero; the Device Reset command is not supported. Bit 10 of word 82 shall be set to zero; the Host Protected Area feature set is not supported. Bit 11 of word 82 is obsolete. Bit 12 of word 82 shall be set to one; the CompactFlash Storage Card supports the Write Buffer command. Bit 13 of word 82 shall be set to one; the CompactFlash Storage Card supports the Read Buffer command. Bit 14 of word 82 shall be set to one; the CompactFlash Storage Card supports the NOP command. Bit 15 of word 82 is obsolete. Bit 0 of word 83 shall be set to zero; the CompactF lash Storage Card does not support the Download Microcode command. Bit 1 of word 83 shall be set to zero; the CompactF lash Storage Card does not support the Read DMA Queued and Write DMA Queued commands. Bit 2 of word 83 shall be set to one; the CompactFlash Storage Card supports the CFA feature set. If bit 3 of word 83 is set to one, the CompactFlash Storage Card supports the Advanced Power Management feature set. Bit 4 of word 83 shall be set to zero; the CompactF lash Storage Card does not support the Removable Media Status feature set. /head2right Words 85-87: Features/command sets enabled Words 85, 86, and 87 shall indicate features/comman d sets enabled. The value 0000h or FFFFh was placed in each of these words by CompactFlash Storage Cards prior to ATA-4 and shall be interpreted by the host as meaning that features/command sets enabled are not indicated. Bits 1 through 15 of word 86 are reserved. Bits 0-13 of word 87 are reserved. Bit 14 of word 87 shall be set to one and bit 15 of word 87 shall be cleared to zero to provide indication that the features/command sets enabled words are valid. The values in these words should not be depended on by host implementers.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Bit 0 of word 85 shall be set to zero; the SMART feature set is not enabled. If bit 1 of word 85 is set to one, the Security Mod e feature set has been enabled via the Security Set Password command. Bit 2 of word 85 shall be set to zero; the Removable Media feature set is not supported. Bit 3 of word 85 shall be set to one; the Power Management feature set is supported. Bit 4 of word 85 shall be set to zero; the Packet Command feature set is not enabled. If bit 5 of word 85 is set to one, write cache is enabled. If bit 6 of word 85 is set to one, look-ahead is enabled. Bit 7 of word 85 shall be set to zero; release interrupt is not enabled. Bit 8 of word 85 shall be set to zero; Service interrupt is not enabled. Bit 9 of word 85 shall be set to zero; the Device Reset command is not supported. Bit 10 of word 85 shall be set to zero; the Host Protected Area feature set is not supported. Bit 11 of word 85 is obsolete. Bit 12 of word 85 shall be set to one; the CompactFlash Storage Card supports the Write Buffer command. Bit 13 of word 85 shall be set to one; the CompactFlash Storage Card supports the Read Buffer command. Bit 14 of word 85 shall be set to one; the CompactFlash Storage Card supports the NOP command. Bit 15 of word 85 is obsolete. Bit 0 of word 86 shall be set to zero; the CompactF lash Storage Card does not support the Download Microcode command. Bit 1 of word 86 shall be set to zero; the CompactF lash Storage Card does not support the Read DMA Queued and Write DMA Queued commands. If bit 2 of word 86 shall be set to one, the CompactFlash Storage Card supports the CFA feature set. If bit 3 of word 86 is set to one, the Advanced Power Management feature set has been enabled via the Set Features command. Bit 4 of word 86 shall be set to zero; the CompactF lash Storage Card does not support the Removable Media Status feature set. /head2right Word 88: Ultra DMA Modes Supported and Selected Word 88 identifies the Ultra DMA transfer modes sup ported by the device and indicates the mode that is currently selected. Only one DMA mode shall be sele cted at any given time. If an Ultra DMA mode is selected, then no Multiword DMA mode shall be selec ted. If a Multiword DMA mode is selected, then no Ultra DMA mode shall be selected. Support of this word is mandatory if Ultra DMA is supported. Bits 15-13: Reserved Bit 12: 1 = Ultra DMA mode 4 is selected 0 = Ultra DMA mode 4 is not selected Bit 11: 1 = Ultra DMA mode 3 is selected 0 = Ultra DMA mode 3 is not selected Bit 10: 1 = Ultra DMA mode 2 is selected 0 = Ultra DMA mode 2 is not selected Bit 9: 1 = Ultra DMA mode 1 is selected 0 = Ultra DMA mode 1 is not selected Bit 8: 1 = Ultra DMA mode 0 is selected 0 = Ultra DMA mode 0 is not selected Bits 7-5: Reserved Bit 4: 1 = Ultra DMA mode 4 and below are supported. Bits 0-3 Shall be set to 1. Bit 3: 1 = Ultra DMA mode 3 and below are supported, Bits 0-2 Shall be set to 1. Bit 2: 1 = Ultra DMA mode 2 and below are supported. Bits 0-1 Shall be set to 1. Bit 1: 1 = Ultra DMA mode 1 and below are supported. Bit 0 Shall be set to 1. Bit 0: 1 = Ultra DMA mode 0 is supported /head2right Word 89: Time required for Security erase unit completion Word 89 specifies the time required for the Securit y Erase Unit command to complete. This command shall be supported on CompactFlash Storage Cards that support security. Value Time

0 Value not specified

1-254 (Value * 2) minutes 255 >508 minutes

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /head2right Word 90: Time required for Enhanced security erase unit completion Word 90 specifies the time required for the Enhanced Security Erase Unit command to complete. This command shall be supported on CompactFlash Storage Cards that support security. Value Time 1-254 (Value * 2) minutes 255 >508 minutes /head2right Word 91: Advanced power management level value Bits 7-0 of word 91 contain the current Advanced Power Management level setting. /head2right Word 128: Security Status Bit 8: Security Level If set to 1, indicates that security mode is enabled and the security level is maximum. If set to 0 and security mode is enabled, indicates that the security level is high. Bit 5: Enhanced security erase unit feature supported If set to 1, indicates that the Enhanced security erase unit feature set is supported. Bit 4: Expire If set to 1, indicates that the security count has expired and Security Unlock and Security Erase Unit are command aborted until a power-on reset or hard reset. Bit 3: Freeze If set to 1, indicates that the security is Frozen. Bit 2: Lock If set to 1, indicates that the security is locked. Bit 1: Enable/Disable If set to 1, indicates that the security is enabled. If set to 0, indicates that the security is disabled. Bit 0: Capability If set to 1, indicates that CompactFlash Storage Card supports security mode feature set. If set to 0, indicates that CompactFlash Storage Card does not support security mode feature set. /head2right Word 160: Power Requirement Description This word is required for CompactFlash Storage Cards that support power mode 1. Bit 15: VLD If set to 1, indicates that this word contains a valid power requirement description. If set to 0, indicates that this word does not contain a power requirement description. Bit 14: RSV This bit is reserved and shall be 0. Bit 13: -XP If set to 1, indicates that the CompactFlash Storage Card does not have Power Level 1 commands. If set to 0, indicates that the CompactFlash Storage Card has Power Level 1 commands Bit 12: -XE If set to 1, indicates that Power Level 1 commands are disabled. If set to 0, indicates that Power Level 1 commands are enabled. Bit 0-11: Maximum current This field contains the CompactFlash Storage Card’s maximum current in mA. /head2right Word 162: Key Management Schemes Supported Bit 0: CPRM support If set to 1, the device supports CPRM Scheme (Content Protection for Recordable Media) If set to 0, the device does not support CPRM. Bits 1-15 are reserved for future additional Key Management schemes.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 /head2right Word 163: CF Advanced True IDE Timing Mode Capabilities and Settings This word describes the capabilities and current se ttings for CFA defined advanced timing modes using the True IDE interface. Notice! The use of True IDE PIO Modes 5 and above o r of Multiword DMA Modes 3 and above impose significant restrictions on the implementation of the host: Additional Requirements for CF Advanced Timing Modes. There are four separate fields defined that describe support and selection of Advanced PIO timing modes and Advanced Multiword DMA timing modes. The older modes are reported in words 63 and 64. Bits 2-0: Advanced True IDE PIO Mode Support Indicates the maximum True IDE PIO mode supported by the card. Value Maximum PIO mode timing selected

0 Specified in word 64

1 PIO Mode 5

2 PIO Mode 6

Bits 5-3: Advanced True IDE Multiword DMA Mode Supp ort Indicates the maximum True IDE Multiword DMA mode supported by the card. Value Maximum Multiword DMA timing mode supported

0 Specified in word 63

1 Multiword DMA Mode 3

2 Multiword DMA Mode 4

Bits 8-6: Advanced True IDE PIO Mode Selected Indicates the current True IDE PIO mode selected on the card. Value Current PIO timing mode selected Bits 11-9: Advanced True IDE Multiword DMA Mode Sel ected Indicates the current True IDE Multiword DMA Mode Selected on the card. Value Current Multiword DMA timing mode selected Bits 15-12 are reserved. /head2right Word 164: CF Advanced PCMCIA I/O and Memory Timing Modes Capabilities and Settings This word describes the capabilities and current se ttings for CFA defined advanced timing modes using the Memory and PCMCIA I/O interface. Notice! The use of PCMCIA I/O or Memory modes that are 100ns or faster impose significant restrictions on the implementation of the host: Additional Requirements for CF Advanced Timing Modes.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 Bits 2-0: Maximum Advanced PCMCIA I/O Mode Support Indicates the maximum I/O timing mode supported by the card. Value Maximum PCMCIA IO timing mode Supported 0 255ns Cycle PCMCIA I/O Mode 1 120ns Cycle PCMCIA I/O Mode 2 100ns Cycle PCMCIA I/O Mode 3 80ns Cycle PCMCIA I/O Mode 4-7 Reserved Bits 5-3: Maximum Memory timing mode supported Indicates the Maximum Memory timing mode supported by the card. Bits 15-6: Reserved. Value Maximum Memory timing mode Supported 0 250ns Cycle Memory Mode 1 120ns Cycle Memory Mode 2 100ns Cycle Memory Mode 3 80ns Cycle Memory Mode 4-7 Reserved

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2 SMART Command Set SMART Command Set SMART Command Set SMART Command Set /circle6 SMART Command Set SMART Feature Register Values D0h Read Data D5h Read Log D1h Read Attribute Threshold D6h Write Log D2h Enable/Disable Autosave D8h Enable SMART Operat ions D3h Save Attribute Values D9h Disable SMART Operati ons D4h Execute OFF-LINE Immediate DAh Return Status 1. If reserved size is below the Threshold, the sta tus can be read from Cylinder register by Return Status command (DAh). /circle6 SMART Data Structure BYTE F / V Decription 2-114 X Vendor specific 115-116 V Power cycle count of the device 117-361 X Vendor specific

362 V Off-line data collection status

363 X Self-test execution status byte

364-365 V Total time in seconds to complete off-lin e data collection activity

366 X Vendor specific

367 F Off-line data collection capability

368-369 F SMART capability 370 F Error logging capability 7-1 Reserved 0 1=Device error logging supported

371 X Vendor specific

372 F Short self-test routine recommended polling time (in minutes)

373 F Extended self-test routine recommended polli ng time (in minutes)

374 F Conveyance self-test routine recommended pol ling time (in minutes)

386-395 F Firmware Version/Date Code 396-397 F Number of initial invalid block (396=MSB, 397=LSB)

400 V Number of spare block

401-402 V Erase count (Low word) 403-405 F ‘SMI’

406 F Number of max pair

407-410 V Erase Count (407-408=High word, 409-410=L ow word) 411-510 X Vendor specific

511 V Data structure checksum

F=the content of the byte is fixed and does not change. V=the content of the byte is variable and may change depending on the state of the device or the commands executed by the device. X=the content of the byte is vendor specific and may be fixed or variable. R=the content of the byte is reserved and shall be zero. * 4 Byte value : [MSB] [2] [1] [LSB] Above technical information is based on CFA standar d data and tested to be reliable. However, Transcen d makes no warranty, either expressed or implied, as to its ac curacy and assumes no liability in connection with the use of this product. Transcend reserves the right to make chang es in specifications at any time without prior noti ce.

TTTrrraaannnsssccceeennnddd IIInnnddduuussstttrrriiiaaalll CCCFFF CCCaaarrrddd TTTSSS111222888MMM~~~333222GGGCCCFFF222000000III Transcend Information Inc. V1.2

The above technical information is based on indu stry standard data and has been tested to be reliab le. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the rig ht to make changes to the specifications at any tim e without prior notice. 2. For specific capacity, performance, and reliability requirement, please contact with sales. USA Los Angeles: E-mail: sales@transcendusa.com Maryland: E-mail: sales_md@transcendusa.com www.transcendusa.com CHINA E-mail: sales@transcendchina.com www.transcendchina.com HONG KONG E-mail: sales@transcend.com.hk www.transcendchina.com TAIWAN TEL +886-2-2792-8000 Fax +886-2-2793-2222 E-mail: sales@transcend.com.tw www.transcend.com.tw GERMANY E-mail: vertrieb@transcend.de www.transcend.de JAPAN E-mail: sales@transcend.co.jp www.transcend.jp UNITED KINGDOM E-mail: sales@transcend-uk.com www.transcend-uk.com KOREA E-mail: sales@transcend.co.kr www.transcend.co.kr THE NETHERLANDS E-mail: sales@transcend.nl www.transcend.nl TS XG CF200I Capacity: 128M-512M = 128 MB up to 512 MB 1G-16G = 1 GB up to 16 GB Extreme Industrial CF card Transcend Product

Product Information

TS128MCF200I specifications and overview.

Summary

TTr rraannsscceenndd I IInndduusst ttr rri iaal ll CCFF CCaar rrdd

Description

TTr rraannsscceenndd I IInndduusst ttr rri iaal ll CCFF CCaar rrdd

Source title TS128MCF200I Datasheet(PDF) - Transcend Information. Inc.

Related Parts

More parts from the same family.

Browse manufacturer