EDS1377-002 EUROPA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
This document must be retained for future reference. It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore ‘fit for purpose’. Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. All connections (including factory made) must be checked for the correct tightness prior to commissioning of the electrical installation. All connections should also be inspected periodically to ensure correct tightness. DO NOT USE POWER TOOLS ON THESE PRODUCTS Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH Technical: 01582 692 444 technical@europa-plc.com www.europa-plc.com Data Sheet EDS1377-002 Page 1 of 2 EUR PA TPNXXSPD12M TPN 3 PHASE BOARDS (125A) inc. TYPE 1/2 SPD and ISOLATOR PREWIRED
Description
- Pre-wired with 125A 4P Mainswitch.
- 3P 125A Isolator for local isolation of Type 1/2 Mersen SPD.
- For commercial and industrial applications.
- Key-release door for added protection.
- Top and bottom 1mm thick gland plates allow easy access into the board. Features and Benefits
- Key-hole top and bottom gland plates for fixing screws. Screws do not need to be removed to release gland plates. 1mm thick rigid design ideal for SWA cable glands.
- Top hook feature on front cover - lid can be securely hung while fixing screws are installed.
- 125A 4 Pole Mainswitch fitted.
- Easily removable busbar pan assembly with key hole slots reduces product weight when installing distribution board onto the wall.
- Half din rail for outgoing devices fitted to allow simple and fast fitting and removal of devices.
- Protection from transient overvoltage by the Mersen Type 1/2 SPD provided.
Europa House, Airport Way, Luton, Bedfordshire, LU2 9NH Technical: 01582 692 444 technical@europa-plc.com www.europa-plc.com Data Sheet EDS1377-002 Page 2 of 2 EUR PA Dimensions Please Note: Before fitting the front cover, check the tightness of all connections, including factory made connections and ensure that blanks are fitted to all unused MCB ways. Part Number Single Phase Ways Three Phase Ways A (mm) B (mm) TPN03SPD12M 9 3 507 392 TPN05SPD12M 15 5 561 446 TPN07SPD12M 21 7 615 500 TPN09SPD12M 27 9 669 554 TPN11SPD12M 33 11 723 608 TPN13SPD12M 39 13 778 662 TPN15SPD12M 45 15 831 716 TPN17SPD12M 51 17 855 770 Board Specification SPD Specification Rated Current [A] 125 Rated Voltage [V] 415 Material Metal Door Type Solid Finish RAL 7035 IP Rating IP30 Mounting Wall Standards BS EN 61439-3 SPD Part Number 83120139 Earthing System TT/TN (3P+N) Un [VAC] 415 Iimp (10/350) [kA] 12.5 (L-N) 50 (N-PE) Imax (8/20) [kA] 50 In (8/20) [kA] 20 Up@In (8/20) [KV] ≤ 1.30 (L-N) ≤ 1.5 (N-PE) Cartridge Part No. (L) 83120002 Cartridge Part No. (N) 83120006