EDS1347-001 EUROPA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore ‘fit for purpose’. Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. All connections (including factory made) must be checked for the correct tightness prior to commissioning of the electrical installation. All connections should be inspected periodically to ensure correct tightness. DO NOT USE POWER TOOLS ON THESE PRODUCTS Europa Helpline: 01582 692 444 / Email: technical@europacomponents.com Page 1 of 1 Europa House, Airport Way, Luton, Beds, LU2 9NH Tel: 01582 692 440 e-mail: sales@europacomponents.com website: www.europacomponents.comEDS1347-001 Code Suitable for use on Atlas Enclosure - H x W x D mm ATLAS-PBP-325 ATLAS-302514 & -P models 262 x 198 x 3 ATLAS-PBP-43 ATLAS-403020 & -P models 360 x 248 x 3 ATLAS-PBP-44 ATLAS-404020 & -P models 360 x 348 x 3 ATLAS-PBP-54 ATLAS-504020 & -P models 460 x 348 x 3 ATLAS-PBP-64 ATLAS-604023 & -P models 558 x 348 x 3 ATLAS-PBP-65 ATLAS-605023 & -P models 558 x 448 x 3 ATLAS-PBP-83 ATLAS-803023 & -P models 756 x 248 x 3 ATLAS-PBP-86 ATLAS-806030 & -P models 756 x 548 x 4 Polyester Back Panel Part Number: ATLAS-PBP-* Larger back panels are supplied with with central fixing options of up to 3 holes for extra anchoring and improves the stiffness of the plate to prevent the base from sagging when attaching heavier components.The relevant additional screws for the central fixing only would be supplied.