TN9300-2 HARRIS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
harris.com | #harriscorp TN9300-2 DMR TIER 2 The Harris TN-9300-2 DMR network node delivers reliable communications in the harshest conditions. This efficient solution establishes calls for radio fleets and consolidates control, monitoring and programming of Tier 2 conventional networks. Engineered for rugged reliability and resilient performance, the TN-9300-2 has no moving parts, a solid state drive and is sealed to prevent dust penetration and protection in salt fog environments. This efficient solution is also designed for low energy consumption, with an idle power demand of 11 watts. The Harris DMR Tier 2 Conventional Network Node supports mission flexibility with multiple, standardized interfaces for external applications, as well as software support for single and multisite services. Plus, it is open standards- based, ensuring opportunities for multi-vendor solutions. ROBUST, SCALABLE, TIER 2 NETWORKING KEY FEATURES Ruggedized design with no moving parts, and sealed for protection against harsh environments Resilient and reliable while processing in a 65’ environment Low power consumption Software support for single or multisite services Multiple interfaces—AIS, SIP, RIP, API CONVENTIONAL NETWORK NODE
About Harris Corporation: Harris Corporation is a leading technology innovator, solving customers’ toughest mission-critical challenges by providing solutions that connect, inform and protect. Harris supports government and commercial customers around the world. Learn more at harris.com Harris is a registered trademark of Harris Corporation. © 2017 Harris Corporation 11/17 CS-PSPC DS1610A Non-Export Controlled Information The word “Tait” and the Tait logo are trademarks of Tait Limited. Tait Limited facilities are certified for ISO9001:2008 (Quality Management System), ISO14001:2004 (Environmental Management System) and ISO18001:2007 (Occupational Health and Safety Management System) for aspects associated with the design, manufacture and distribution of radio communications and control equipment, systems and services. In addition, all our Regional Head Offices are certified to ISO9001:2008. *Contact Harris if more capacity is required INTERFACE Console Connectivity AIS (DMRA standard) SIP Phone SIP Recorder RIP Location Services Application Harris monitoring API CONNECTIVITY WAN Speed (per slot, voice and data) 32Kbps WAN Jitter Less than 20mS WAN Latency (maximum acceptable) 100mS WAN Bandwidth (reprogramming/monitoring) 100Kbps Multisite Capacity 6 sites extensively tested* Maximum site repeater capacity Up to 3 repeaters per site: 6 slots* Weight 1.05Kgs Processor/Speed Intel® Core™ i3-3217-U, 1.80GHz Connectivity 1 x 10/100/1000Mbps Ethernet, 3 x USB 2.0 ports, 2 x HDMI ports GENERAL Supported Server Aleutia R50 Standard Configuration 8GB RAM and 256GB SSD Power 11-19V DC: 11W idling, 20W peak Dimensions (H x W x D) 1.8215in x 6.4531in x 4.3281in (46mm x 164mm x 110mm) Operating Temperature -15ºC to 6ºC standard Water/Dust Protection IP54 Weight 37.07oz or (1.05Kgs) Processor/Speed Intel® Core™ i3-3217-U, 1.80GHz Connectivity 1 x 10/100/1000Mbps Ethernet, 3 x USB 2.0 ports, 2 x HDMI ports SPECIFICATIONS FOR: TN9300-2 DMR TIER 2 CONVENTIONAL NETWORK NODE NOTE: The TN9300-2 node is not required if RF dispatch radio operation is the only control required with a TB9300 DMR Tier 2 base station. MULTISITE / MULTI STATION CONTROL GATEWAY SINGLE SITE / SINGLE STATION CONTROL GATEWAY Specifications are subject to change without notice and shall not form part of any contract. They are issued for guidance purposes only. All specifications shown are typical.