TMP90 TRUMPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

DESCRIPTION

The TMP90 is a series of AC/DC desktop power adapters with 60 to 90 watts of continuous output power. They are enclosed in a 94V-1 rated case with an IEC 320/C14 or C18 inlet for medical and ITE applications. All models meet EN55011, EN55022 and FCC class B emission limits, and are designed for medical applications.

FEATURES

‧ Low safety ground leakage current ‧ IEC320/C14 (Class I) or C18 (Class II) Inlet ‧ 90 to 264VAC wide input range ‧ Optional output connectors ‧ Overvoltage & overcurrent protections ‧ 0.98 PFC ‧ 100% burn-in ‧ Compliant with CEC and Energy Star efficiency level IV requirements (except ≤12V output models) ‧ No load power consumption less than 0.5W ‧ Average active efficiency ≥85% ‧ Compliant with RoHS requirements INPUT SPECIFICATIONS Input voltage : Input frequency : Input current : Earth leakage current : OUTPUT SPECIFICATIONS Output voltage/current ： See rating chart Total output power ： See rating chart Ripple and noise ： 2% peak to peak maximum Over voltage protection ： Set at 112-140% of its nominal output voltage Over current protection ： Protected to short circuit conditions Temperature coefficient ： ±0.04%/ºC maximum Transient response ： Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500µs after a 25% step load change ENVIRONMENTAL SPECIFICATIONS Operating temperature ： Storage temperature ： Relative humidity ： Derating： 0ºC to +60ºC -40ºC to +85ºC 5% to 95% non-condensing Derate from 100% at +40ºC linearly to 50% at +60ºC Safety Standard Approvals ： GENERAL SPECIFICATIONS Switching frequency ：50 KHz - 110 KHz Power factor ： 0.98 Typical Efficiency ： 85% min. (78% min. for TMP90-05, TMP90-06, TMP90-09 and TMP90-12) Hold-up time ： 15 msec minimum at 110VAC Line regulation ： ±0.5% maximum at full load Inrush current ： 40 amps @ 115VAC or 60 amps @ 230VAC, @ 25ºC cold start Withstand voltage ： 4000VAC from input to output 1500VAC from input to ground 500VAC from output to ground MTBF ： 150,000 hours minimum at full load at 25ºC ambient, calculated per MIL-HDBK-217F EMC Performance (IEC60601-1-2: 2001) EN55011: Class B conducted, Class B radiated FCC: Class B conducted, Class B radiated VCCI: Class B conducted, Class B radiated EN61000-3-2: Harmonic distortion, Class A and D EN61000-3-3: Line flicker EN61000-4-2: ESD, ±8KV air and ±6KV contact EN61000-4-3: Radiated immunity, 3V/m EN61000-4-4: Fast transient/burst, ±2KV EN61000-4-5: Surge, ±1KV diff, ±2KV com. EN61000-4-6: Conducted immunity, 3Vrms EN61000-4-8: Magnetic field immunity, 3A/m EN61000-4-11: Voltage dips, 30% reduction for 500ms, 60% reduction for 100ms and >95% reduction for 10ms TMP90 SERIES UL 60601-1 CSA C22.2 No. 601.1 TÜV EN60601-1 (LVD) RoHS Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: sales@trumpower.com ● Website: www.TRUMPower.com TRUMPower 90 WATTS MEDICAL POWER ADAPTERS 90 to 264VAC 47 to 63Hz 1.20A (rms) for 115VAC 0.60A (rms) for 230VAC 90µA max. @ 115VAC, 60Hz 150µA max. @ 230VAC, 50Hz

MEDICAL GRADE TMP90 SERIES OUTPUT VOLTAGE/CURRENT RATING CHART O u t p u t Maximum TMP90-05 5V 0A 12.0A 5% 60W TMP90-06 6V 0A 10.0A 5% 60W TMP90-09 9V 0A 7.78A 5% 70W TMP90-12 12V 0A 6.67A 5% 80W TMP90-13.5 13.5V 0A 6.3A 5% 85W TMP90-15 15V 0A 5.67A 5% 85W TMP90-18 18V 0A 5.0A 5% 90W TMP90-19 19V 0A 4.74A 5% 90W TMP90-24 24V 0A 3.75A 5% 90W TMP90-30 30V 0A 3.0A 5% 90W TMP90-48 48V 0A 1.87A 5% 90W NOTES: 1. Ripple and noise: Peak-to–peak with 20MHz bandwidth and 10µF tantal um capacitor in parallel with a 0.1µF ceramic capacitor at rated line voltage and load ranges. 2. To order a model with IEC320/C18 inlet with class II insulation, add suffix “C2” , e.g. TMP90-12-C2. MECHANICAL SPECIFICATIONS PIN CHART 1 2 3 4 Shell TMP90-05 TMP90-09 TMP90-13.5 TMP90-18 TMP90-24 TMP90-48 TMP90-06 TMP90-12 TMP90-15 TMP90-19 TMP90-30 RETURN OUTPUT +V RETURN OUTPUT +V AC Ground NOTES: 1. Dimensions show in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 658 grams approx. 4. Standard output connector is a male 4-pin power DIN. Please contact TRUMPower for other connector options. 5. TMP90-05 and TMP90-06 output connectors are without lock. Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: sales@trumpower.com ● Website: www.TRUMPower.com PIN Product No.