TMP105 TRUMPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
90-105 Watts Medical & ITE Power Adapters Tumbler Technologies + TRUMPower 3350 Scott Blvd., Building 13 • Santa Clara, California 95054, USA • 408-988-6616 • sales@trumpower.com • www.TRUMPower.com TRUMPower MODELS LIST .oNtcudorP )1( tuptuO egatloV mumixaM tnerruC kaeP )2( tnerruC mumixaM rewoP 21-501PMT V21A 5.7A 51W 09 31-501PMT V31A 39.6A 8.31W 09 51-501PMT V61~41A 97.6A 85.31W 59 81-501PMT V91~81A 48.5A 6.11W 501 02-501PMT V12~02A 52.5A 5.01W 501 42-501PMT V52~42A 83.4A 7.8W 501 82-501PMT V92~82A 57.3A 5.4W 501 03-501PMT V23~03A 5.3A 2.4W 501 63-501PMT V83~63A 29.2A 5.3W 501 84-501PMT V05~64A 92.2A 7.2W 501 INPUT SPECIFICATIONS 0.7A rms @ 230 VAC at 25°C cold start OUTPUT SPECIFICATIONS output voltage conditions all models, recovering to 1% of final value within 500 µs after a 25% step load change * Measured with 20MHz bandwidth at rated line voltage and output load ranges, with a 10µF tantalum capacitor in parallel with a 0.1µF ceramic capacitor in parallel across the output. GENERAL SPECIFICATIONS to 50% at +60 °C (4,000 VAC for Class II models) 2,121 VDC from input to ground
707 VDC from output to ground
25°C ambient, calculated per MIL-HDBK-217F STANDARDS & COMPLIANCES 30% reduction for 500ms, 60% reduction for 100ms, >95% reduction for 10ms ANSI/AAMI ES 60601-1 (1st Ed.), CSA C22.2 No. 60601-1 (2nd Ed.), IEC/EN 60950-1 (2nd Ed.)
FEATURES
- 90~264 VAC Input, Soft Start
- 0.98 Power Factor
- 87% to 91% Efficiency
- High Peak Power
- Low Safety Ground Leakage Current
- Class I & Class II Models Available
- Compliant with CEC & Energy Star Level V Notes: 1) The listed P/N's are for Class I models equipped with IEC 320/C14 AC inlet. Add suffix "C2" to order Class II models equipped with IEC 320/C18 AC inlet. When ordering 14-50V output units, specify the requested voltage, e.g. use P/N TMP105-18.5-C2 to order 18.5V Class II model. 2) The peak current is for 10 seconds maximum with the average power not over the maximum power.
Tumbler Technologies + TRUMPower 3350 Scott Blvd., Building 13 • Santa Clara, California 95054, USA • 408-988-6616 • sales@trumpower.com • www.TRUMPower.com TMP105 Series 90-105 Watts Medical & ITE Power Adapters #TMP105_2012-10-16 MECHANICAL SPECIFICATIONS ROTCENNOCTUPTUOCD NIP NOITCNUF
1 NRUTER
3 NRUTER
LLEHS CN*/DNGCA sledomIIssalcnoCNsillehS* Output connector: Kycon P/N KPPX-4P 4-pin circular DIN or equivalent. Mating connector: Kycon P/N KPJX-4S-S or equivalent Contact TRUMPower for output connector options. Unit: inch [mm] Tolerance: 0.02 [0.5] maximum *The length of the output cable on 12V to 16V output models is 37.4 inches (950mm) so as to meet CEC efficiency level V requirements.