TMPC-180-1U TRUMPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
- Complies with SFX12V 2.0
- 90 to 265 VAC Universal Input
- Meets 1U Height Constraints
- High Efficiency
- Low Ripple & Noise
- Input Line Fuse Protection
- Output Overvoltage Protections
- Short Circuit Protection on All Outputs
- Active Power Factor Correction (PFC) meets EN 61000-3-2
- UL, cUL, VDE, CE Approved to UL 60601-1, EN 60601-1, IEC 60601-1
- Meets FCC Part 18 Subpart C, EN60601-1-2, EN55011, CISPR 11 Class B
- MTBF > 100,000 Hours @ 25°C
- 100% Burn-in @ 50°C
- 100% Hi-Pot Test Input Specifications Voltage: 90-265 VAC Frequency: 47-63Hz Input current: 4A max. @115VAC/60Hz, 2A max. @230 VAC/50Hz Leakage current: 0.3mArms max. @264 VAC/63Hz, AC to safety ground Output Specifications *Regulation DC Output Voltage Minimum Load Normal Load *Maximum Load Load Line Ripple & Noise P-P (Max.) +3.3V +5V +12V -12V +5Vsb 0.3A 0.3A 1.5A 8.4A 0.4A 16.8A/4.5A 12A/9A 12A/9A 0.8A 2.0A ±5% ±5% ±5% ±10% ±5% ±1% ±1% ±1% ±2% ±1% 50mV P-P 50mV P-P 120mV P-P 120mV P-P 50mV P-P *Total output on +3.3V and +5V shall not exceed 61W. *Total output on +3.3V, +5V and +12V shall not exceed 165W, and is limited to 180W total power. *+3.3V, +5V, +12V, and -12V will have ±10% regulation with all loads removed. Other Specifications Inrush current: 50A/80A cold strat at 115/230 VAC, 25°C ambient Overload protection: 150% Max Power good signal: turn-on delay 100 msec to 500 msec Power fail signal delay time: 1 msec min. Hold up time: 17ms min. at full load and nominal input voltage Efficiency: 68% min. at full load Temperature range: Operating 0°C-50°C; Non-operating: -20°C-80°C Humidity: 5-95% RH, non-condensing Temperature coefficient: 0.01%°C Tumbler Technologies + TRUMPower Santa Clara, California USA • Phone 408-988-6616 • sales@TRUMPower.com • www.TRUMPower.com