TMP60 TRUMPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
TRUMPower 30-60 WATT MEDICAL POWER ADAPTERS
DESCRIPTION
The PMP60 is a series of AC/DC switching power adapters consists of 30 to 60 watts single, dual and triple outputs. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC 320 /C14 inlet to mate with interchangeable cord for world-wide use. All models meet CISPR 11 and FCC class B emission limits, and are designed for medical applications where low earth leakage current is required.
FEATURES
‧ Desktop form factor ‧ Single, dual, or triple outputs ‧ Optional output connectors ‧ 100% burn-in ‧ Wide input range 85 to 264V AC ‧ Input surge current protection ‧ Overvoltage protection ‧ Overcurrent protection ‧ Compliant with CEC and Energy Star Efficiency level IV requirements * No load power consumption less than 0.5W * Average active efficiency ≧ 85% ‧ Compliant with RoHS requirement INPUT SPECIFICATIONS Input voltage ： 85 to 264 V AC Input frequency ： 47 to 63 Hz Input current ： 1.30A (rms) for 115 V AC 0.70A (rms) for 230V AC Leakage current ： 90uA max. @ 115V AC, 60Hz 150uA max. @ 230V AC, 50Hz TMP60 SERIES Safety Standard Approvals: OUTPUT SPECIFICATIONS Output voltage/current ： See rating chart Total output power ： See rating chart Ripple and noise ： 2﹪peak to peak maximum Overvoltage protection ： Provided on output #1 only; set at 112-140 ﹪of its nominal output voltage Overcurrent protection ： All outputs protected to short circuit conditions Temperature coefficient ： All outputs ±0.04 ﹪/℃ maximum Transient response ： Maximum excursion of 4 ﹪or better on all models, recovering to 1 ﹪of final value within 500us after a 25 ﹪ step load change ENVIRONMENTAL SPECIFICATIONS Operating temperature ： Storage temperature ： Relative humidity ： Derating： 0 ℃ to +60 ℃ -40 ℃ to+85 ℃ 5 ﹪ to 95 ﹪ non-condensing Derate from 100﹪ at +40 ℃ linearly to 50﹪at +60℃ GENERAL SPECIFICATIONS Switching frequency ： 40KH z - 130 KHz Efficiency ： 85 ﹪minimum on single output models, 65 ﹪minimum on the others Hold-up time ： 10 msec minimum at 110VAC Line regulation ： ±0.5 ﹪ maximum at full load Inrush current ： 50 amps @ 115V AC, or 100 amps @230V AC, at 25 ℃ cold start Withstand voltage ： 4000V AC from input to output 1500V AC from input to ground 500V AC from output to ground MTBF ： 150,000 hours minimum at full load at 25 ℃ambient , calculated per MIL-HDBK-217F EMC performance (EN60601-1-2) EN55011: Class B c onducted, Class B radiated FCC: Class B conducted, Class B radiated VCCI: Class B conducted, Class B radiated EN61000-3-2: Harmonic distortion , Class A EN61000-3-3: Line flicker EN61000-4-2: ESD,± 8KV air and ± 6KV contact EN61000-4-3: Radiated immunity , 3V/m for 80~ 2500MHz EN61000-4-4: Fast transient/burst, ± 2KV EN61000-4-5: Surge, ± 1KV diff., ± 2KV com. EN61000-4-6: C onducted immunity, 3Vrms EN61000-4-8: Magnetic field immunity , 3A/m EN61000-4-11: V oltage dips, 30 ﹪reduction for 500ms, 60% reduction for 100ms and >95 ﹪ reduction for 10ms RoHS UL 60601-1 CSA C22.2 No. 601.1 TÜV EN60601-1 (LVD) Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: sales@trumpower.com ● Website: www.TRUMPower.com
Medical Grade TMP60 Series OUTPUT VOLTAGE/CURRENT RATING CHART Maximum Output #1 Output #2 Output #3 Output TMP60-Sxx 11-13V 0A 5.46A 5% (N/A) (N/A) 60W TMP60-Sxx 13-17V 0A 4.62A 5% (N/A) (N/A) 60W TMP60-Sxx 17-21V 0A 3.53A 5% (N/A) (N/A) 60W TMP60-Sxx 21-27V 0A 2.86A 5% (N/A) (N/A) 60W TMP60-Sxx 27-33V 0A 2.23A 3% (N/A) (N/A) 60W TMP60-Sxx 33-39V 0A 1.82A 3% (N/A) (N/A) 60W TMP60-Sxx 46-50V 0A 1.31A 3% (N/A) (N/A) 60W TMP60-D23 +5V 1A 5.0A 5% +12V 0.5A 3.0A 5% (N/A) 40W (2) Ripple and noise: Peak-to-peak with 20MHz bandwidth and 10uF tantalum capacitor in parallel with a 0.1uF ceramic capacitor at rated line voltage and load ranges (3) The output voltages of a multiple output model may go outside of the stated tolerance when an output load current is out of stated limits. All models may be operated at no-load without damage. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions show in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 600 grams approx. 4. For other output connector options, please contact TRUMPower. 5. To order a model with on/off switch, add suffix ”S” to the model number, e.g. TMP60-S30-S. PIN CHART P / N P I N 1 2 3 4 5 TMP60-Sxx RETURN RETURN OUTPUT #1 RETURN OUTPUT TMP60-D23 COMMOM RETURN COMMOM RETURN OUTPUT #1 N.C. OUTPUT TMP60-T30 TMP60-T31 TMP60-T33 TMP60-T36 COMMOM RETURN COMMOM RETURN OUTPUT OUTPUT OUTPUT Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: sales@trumpower.com ● Website: www.TRUMPower.com