DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
100 Watts Medical & ITE Switching Power Supplies
Tumbler Technologies + TRUMPower 3350 Scott Blvd., Building 13 • Santa Clara, California 95054, USA • 408-988-6616 sales@trumpower.com www.TRUMPower.com TRUMPower INPUT SPECIFICATIONS 1.1A rms @ 200~240 VAC at 25°C cold start OUTPUT SPECIFICATIONS 1% peak to peak on other models of its nominal output voltage conditions all models, recovering to 1% of final value within 500µs after a 25% step load change * Measured with 20MHz bandwidth at rated line voltage and output load ranges, with a 10µF tantalum capacitor in parallel with a 0.1µF ceramic capacitor across the output. GENERAL SPECIFICATIONS to 50% at +70 °C
1500 VAC from input to ground
500 VAC from output to ground
25°C ambient, calculated per MIL-HDBK-217F STANDARDS & COMPLIANCES for 500ms (criteria A @ 230 VAC, criteria B @ 100 VAC), 60% reduction for 100ms (criteria B), >95% reduction for 10ms (criteria A) CSA C22.2 No. 601.1, UL 60950-1, EN 60950-1, CSA C22.2 No. 60950-1
FEATURES
Compact Size 2" x 4" x 1.26" Ultra High Power Density 10W/cubic inch 90~132 VAC or 180~264 VAC Full Range Input Low Earth Leakage Current Conducted EMI Class B MODELS LIST Notes: 1. S afety approvals are for PCB form only. 2. Add suffix "C" to order unit with cover fitted, e.g. TMC100-S18C, etc. .oNtcudorP egatloVtuptuO tnerruC.xaM rewoPtuptuO.xaM 50S-001CMT V5A 02W 001 21S-001CMT V21A 43.8W 001 51S-001CMT V51A 7.6W 001 81S-001CMT V81A 65.5W 001 42S-001CMT V42A 2.4W 001 82S-001CMT V82A 85.3W 001 63S-001CMT V63A 87.2W 001 84S-001CMT V84A 1.2W 001
Tumbler Technologies + TRUMPower 3350 Scott Blvd., Building 13 Santa Clara, California 95054, USA 408-988-6616 sales@trumpower.com www.TRUMPower.com TMC100 Series #TMC100-2011-0727 MECHANICAL SPECIFICATIONS ROTCENNOCTUPTUOCD NIP NOITCNUF
1 NRUTER
2 NRUTER
3 NRUTER
NOTES: 1. Dimensions: inches [mm] 2. Tolerance: 0.02 [0.5] maximum 3. Connector P1: Molex header 09-65-2038 or equivalent, mating with Molex housing 09-50-1031 or equivalent. 4. Connector P2: Molex header 09-65-2068 or equivalent, mating with Molex header 09-50-1061 or equivalent. 5. To ensure compliance with level B emissions, connect the three marked mounting holes (*) with metallic standoffs to chassis. 6. Weight: 190 grams (0.44 lbs.) approx. CONNECTOR