TM650-T37

TM650 TRUMPOWER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

DESCRIPTION

The TM650 series comprising single and multiple output models for 650-700 watts of continuous output power is specially designed for medical applications not for life support. They operate at 90 to 264VAC input voltage without the need of a selector strap. The units are constructed on a printed circuit board with a U-bracket for mechanical support and heat sinking. A cover-and-fan assembly can be added during manufacturing. TM650 SERIES Safety Standard Approvals ：

FEATURES

‧ EN61000-3-2 class A and D compliant ‧ Power Factor 0.98 typical ‧ Overvoltage protection ‧ Short-circuit protection ‧ Thermal protection ‧ Power Fail Detect (PFD) ‧ 100% burn-in at full rated load ‧ Remote sense on output #1 and output #2 ‧ Remote inhibit – TTL high disables output ‧ Compliant with RoHS requirements INPUT SPECIFICATIONS Input voltage： 90 to 264VAC Input frequency： 47 to 63Hz Input current： 10A（rms）for 115VAC 5A（rms）for 230VAC Earth leakage current： 100µA max. @ 115VAC, 60Hz 165µA max. @ 230VAC, 50Hz ENVIRONMENTAL SPECIFICATIONS Operating temperature ： 0ºC to +70ºC Storage temperature ： -40ºC to +85ºC Relative humidity ： 5% to 95% non-condensing Derating ： Derate from 100% at +50ºC linearly to 50% at +70ºC OUTPUT SPECIFICATIONS Output voltage/current： See rating chart Total output power： See rating chart Ripple and noise： 2% peak to peak maximum Overvoltage protection： Provided on output #1 only; set at 115 –140% of its nominal output voltage Overcurrent protection： All outputs protected to short circuit conditions Temperature coefficient： All outputs ±0.04%/ºC maximum Transient response： Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500µs after a 25% step load change PFD signal： TTL logic high for normal operation and TTL logic low upon loss of input power. This signal appears at least 1ms prior to master output dropping 5% below its nominal value. This signal also provides a minimum delay of 100 ms after master output is within regulation. Remote inhibit ： Requires an external TTL high level signal to inhibit outputs for standard models. GENERAL SPECIFICATIONS Switching frequency ： 70KHz ±10KHz Power factor ： 0.98 typical Efficiency ： 80% minimum on all models Hold-up time ： 12 msec minimum at 110VAC Line regulation ： ±0.2% maximum at full load Inrush current ： 50amps @115VAC or 100 amps @ 230VAC at 25ºC cold start Withstand voltage ： 4000VAC from input to output 1500VAC from input to ground 500VAC from output to ground MTBF ： 300,000 hours minimum at full load at 25ºC ambient, calculated per MIL-HDBK- 217F EMC Performance (EN60601-1-2) EN55011: Class B conducted, Class A radiated EN61000-3-2: Harmonic distortion, Class A and D EN61000-3-3: Line flicker EN61000-4-2: ESD, ±8KV air and ±6KV contact EN61000-4-3: Radiated immunity, 3V/m EN61000-4-4: Fast transient/burst, ±2KV EN61000-4-5: Surge, ±1KV diff, ±2KV com. EN61000-4-6: Conducted immunity, 3Vrms EN61000-4-8: Magnetic field immunity, 3A/m EN61000-4-11: Voltage dips, 30% reduction for 500ms, 60% reduction for 100ms and >95% reduction for 10ms RoHS UL 60601-1 CSA C22.2 No. 601.1 TÜV EN60601-1 TRUMPower 650 WATT MEDICAL POWER SUPPLIES Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: sales@trumpower.com ● Website: www.TRUMPower.com (LVD)

MEDICAL GRADE TM650 SERIES OUTPUT VOLTAGE/CURRENT RATING CHART Maximum Output # 1 Output # 2 Output # 3 Output TM650-S12 12V 0A 54.2A 2% 650W TM650-S15 15V 0A 43.4A 2% 650W TM650-S24 24V 0A 27.1A 2% 650W TM650-S27 27V 0A 24.1A 2% 650W TM650-S30 30V 0A 21.7A 2% 650W TM650-S36 36V 0A 18.1A 2% 650W TM650-S48 48V 0A 14.6A 2% 700W TM650-D20 24V 1.5A 18A 2% 12V 1.2A 22A 5% 650W TM650-D21 24V 1.5A 18A 2% 15V 1.0A 18A 5% 650W TM650-D22 48V 0.75A 9A 2% 24V 0.6A 12A 5% 650W TM650-D23 48V 0.75A 9A 2% 12V 1.2A 22A 5% 650W TM650-D24 48V 0.75A 9A 2% 15V 1.0A 18A 5% 650W TM650-T30 24V 1.5A 18A 2% 12V 1. 2A 22A 5% 3.3V 0A 10A 3% 650W TM650-T31 24V 1.5A 18A 2% 15V 1. 0A 18A 5% 3.3V 0A 10A 3% 650W TM650-T32 24V 1.5A 18A 2% 12V 1. 2A 22A 5% 5.1V 0A 10A 3% 650W TM650-T33 24V 1.5A 18A 2% 15V 1. 0A 18A 5% 5.1V 0A 10A 3% 650W TM650-T34 48V 0.75A 9A 2% 12V 1.2A 22A 5% 3.3V 0A 10A 3% 650W TM650-T35 48V 0.75A 9A 2% 15V 1.0A 18A 5% 3.3V 0A 10A 3% 650W TM650-T36 48V 0.75A 9A 2% 12V 1.2A 22A 5% 5.1V 0A 10A 3% 650W TM650-T37 48V 0.75A 9A 2% 15V 1.0A 18A 5% 5.1V 0A 10A 3% 650W NOTES: 1. Add suffix “C” for enclosed format wi th fan control function, e.g. TM650-S24C. 2. All outputs are floating. It can be connect ed externally for positive or negative output. 3. Output #1 can be adjusted within +/- 5% of their nominal voltage. 4. Output #3 can be adjusted within +/- 15% of their nominal voltage. 5. 650~700 watts for "C" version with cover-and-fan assembly. 325~ 350 watts for U-bracket version without moving air (maximum current of output #1 and #2 derated to 70%), or 650 watts with 50 CFM forced air provided by user. 6. All models may operated at no-load. At no-l oad, output voltage tolerance increases to 10%. Single Output Models NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum. 3. Input connector P1 is Dinkle DT-4C-B01N-03 screws are M3, Nickel plated. 4. Connector P4 mates with Molex housing 50-37-5103 and pins 5263. screw connections. 6. Weight: 2,040 gms. MECHANICAL SPECIFICATIONS Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: sales@trumpower.com ● Website: www.TRUMPower.com

MEDICAL GRADE TM650 SERIES MECHANICAL SPECIFICATIONS Multiple Output Models PIN CHART P1 (AC) P4 1 2 3 P2 P3 1 2 3 4 LIVE NEUTRAL GROUND ＋V －V SIGNAL GROUND (－V) ＋S (V) －S (V) PFD 5 6 7 8 9 10 INHIBIT +Ve INHIBIT -Ve N.C. N.C. 0V (FAN) FAN P1 (AC) P2 P3 P4 1 2 3 1 2 3 4 LIVE NEUTRAL GROUND ＋V1 －V1 SIGNAL GROUND (－V) ＋S (V1) －S (V1) PFD P4 P5 5 6 7 8 9 10 1 2 3 4 5 6 ＋V2 ＋V2 －V2 －V2 N.C. N.C. TM650-T30 TM650-T31 TM650-T32 TM650-T33 TM650-T34 TM650-T35 TM650-T36 TM650-T37 INHIBIT +Ve INHIBIT -Ve ＋S (V2) －S (V2) 0V (FAN) FAN CONN PIN Product No. CONN PIN Product No. CONN PIN Single Output Models Multiple Output Models NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector P1 is Dinkle DT-4C-B01N-03 screws are M3, Nickel plated 4. Connector P4 mates with Molex housing 50-37-5103 and pins 5263. 5. P2, P3: M3*0.05 screw connections. 6. Output connector P5 is Dinkle DT-35-B01W-06 screws are M3, Nickel plated. 7. Weight: 2,140 gms. TM650-S12 TM650-S15 TM650-S24 TM650-S27 TM650-S30 TM650-S36 TM650-S48 TM650-S12 TM650-S15 TM650-S24 TM650-S27 TM650-S30 TM650-S36 TM650-S48 TM650-D20 TM650-D21 TM650-D22 TM650-D23 TM650-D24 Product No. PIN Product No. CONN TM650-D20 TM650-D21 TM650-D22 TM650-D23 TM650-D24 TM650-T31 TM650-T30 TM650-T33 TM650-T32 TM650-T35 TM650-T34 TM650-T37 TM650-T36 Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: sales@trumpower.com ● Website: www.TRUMPower.com