TM200 TRUMPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

200 WATT MEDICAL POWER SUPPLIES

DESCRIPTION

Comprising single and multiple output models with 200 watts of continuous output power, the TM200 series is specially designed for medical applications. Auto-ranging input allows them to operate from any line voltage throughout the world without a selector strap. All auxiliary outputs are with magnetic amplifier or linear regulator to keep regulation. The units are constructed on a printed circuit board with a U-bracket for mechanical support and heat sinking. A cover-and-fan assembly can be added during manufacturing

FEATURES

‧ Low safety ground leakage current ‧ Meet EN 55011 and FCC class B ‧ Auto-ranging input ‧ Short-circuit protection with auto-recovery ‧ Power Fail Detect （ PFD ） signal ‧ 100% burn-in at full rated load ‧ Optional cover-and-fan assembly TM200 SERIES Safety Standard Approvals: INPUT SPECIFICATIONS Input voltage: 90 to 130 VAC, or 180 to

264 VAC （ auto-ranging ）

Input frequency: 47 to 63 Hz Input current: 4.5A （ rms ） for 115VAC 2.6A （ rms ） for 230VAC Leakage current: 90 µA max. @ 115VAC, 60Hz 15 µA max. @ 230VAC, 50Hz ENVIRONMENTAL SPECIFICATIONS Operating temperature: 0ºC to +70ºC Storage temperature: -40ºC to +85ºC Relative humidity: 5% to 95% non-condensing Derating: Derate from 100% at +50ºC linearly to 50% at +70ºC Cooling: 25 CFM forced air, provided on covered version, to be provided for U-bracket version by user OUTPUT SPECIFICATIONS Output voltage/current ： See rating chart Total output power ： 200 watts maximum Ripple and noise ： 2% peak to peak maximum Overvoltage protection ： Provided on output #1 only; set at 112 – 132% of its nominal output voltage Overcurrent protection ： All outputs protected to short circuit conditions Temperature coefficient ：All outputs ±0.04%/ºC maximum Transient response ： Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500µs after a 25% step load change PFD signal ： TTL logic high for normal operation and TTL logic low upon loss of input power. This signal appears at least 1 ms prior to +5V output dropping 5% below its nominal value. This signal also provides a minimum delay of 100 ms after +5V is within regulation. GENERAL SPECIFICATIONS Switching frequency ： 64KHz ±5KHz Efficiency ： 70% minimum on all models Hold-up time ： 12 msec minimum at 110VAC Line regulation ： ±0.5% maximum at full load Inrush current ： 20 amps @ 115VAC, or 40 amps @ 230VAC, at 25ºC cold start Withstand voltage ： 4000VAC from input to output 1500VAC from input to ground 500VAC from output to ground MTBF ： 450,000 hours at full load at 25ºC ambient, calculated per MIL-HDBK-217F EMC Performance (EN60601-1-2: 2001) EN55011: Class B conducted, Class B radiated FCC: Class B conducted, Class B radiated VCCI: Class B conducted, Class B radiated EN61000-3-2: Harmonic distortion, Class A EN61000-3-3: Line flicker EN61000-4-2: ESD, ±8KV air and ±4KV contact EN61000-4-3: Radiated immunity, 3V/m EN61000-4-4: Fast transient/burst, ±1KV EN61000-4-5: Surge, ±1KV diff, ±2KV com. EN61000-4-6: Conducted immunity, 3Vrms EN61000-4-8: Magnetic field immunity, 1A/m EN61000-4-11: Voltage dips, 30% reduction for 500ms and >95% reduction for 10ms Interruptions, >95% for 5000ms UL 2601-1 CSA C22.2 No. 601.1 TÜV EN60601-1 (MDD) Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: sales@trumpower.com ● Website: www.TRUMPower.com TRUMPower

MEDICAL GRADE TM200 SERIES OUTPUT VOLTAGE/CURRENT RATING CHART Maximum Output #1 Output #2 Output #3 Output #4 Output TM200-S05 5V 3.0A 40A 2% (N/A) (N/A) (N/A) 200W TM200-S12 12V 1.2A 16.7A 2% (N/A) (N/A) (N/A) 200W TM200-S15 15V 1.0A 13.4A 2% (N/A) (N/A) (N/A) 200W TM200-S24 24V 0.6A 8.4A 2% (N/A) (N/A) (N/A) 200W TM200-S30 30V 0.5A 6.7A 2% (N/A) (N/A) (N/A) 200W TM200-S48 48V 0.5A 4.2A 2% (N/A) (N/A) (N/A) 200W TM200-D23 +5V 3.0A 30A 2% +12V 0A 8A 4% (N/A) (N/A) 200W TM200-D24 +5V 3.0A 30A 2% +15V 0A 6A 4% (N/A) (N/A) 200W TM200-D25 +5V 3.0A 30A 2% +24V 0A 4A 4% (N/A) (N/A) 200W TM200-T30 +5V 3.0A 30A 2% +12V 0A 8A 4% - 5 V0 A6 A 4 % (N/A) 200W TM200-T31 +5V 3.0A 30A 2% +12V 0A 8A 4% -12V 0A 4A 4% (N/A) 200W TM200-T32 +5V 3.0A 30A 2% +15V 0A 6A 4% -15V 0A 4A 4% (N/A) 200W TM200-T33 +5V 3.0A 30A 2% +15V 0A 6A 4% -12V 0A 4A 4% (N/A) 200W TM200-Q40 +5V 3.0A 30A 2% +12V 0A 8A 4% -12V 0A 4A 4% 5V 0A 6A 4% 200W TM200-Q41 +5V 3.0A 30A 2% +15V 0A 6A 4% -15V 0A 4A 4% 24V 0A 4A 4% 200W TM200-Q42 +5V 3.0A 30A 2% +12V 0A 8A 4% -12V 0A 4A 4% 12V 0A 4A 4% 200W TM200-Q44 +5V 3.0A 30A 2% +12V 0A 8A 4% -15V 0A 4A 4% 15V 0A 4A 4% 200W TM200-Q45 +5V 3.0A 30A 2% +12V 0A 8A 4% -12V 0A 4A 4% 24V 0A 4A 4% 200W Notes: (1) Add suffix “C” for enclosed format, e.g. TM200-Q45C. (2) Peak current is 12A on +12V, 9A on +15V and 6A on +24V. (3) Output #4 is floating. It can be connec ted externally for positive or negative output. (4) 200 watts for “C” version with a cover-and-fan assembly. 150 watts U-bracket version without moving air (maximum current of output #1 & #2 derated to 70%), or 200 watts with 25 CFM forced air provided by user. (5) When the remote sense facility is not used, +Sense must be connected to +V, and –Sense to return, on P2 connector. (6) All models may be operated at no-load. At no- load, output voltage tolerance increases to 10% MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector P1 is Beau Inc. P/N 72-5-03C, output connector P2 is Beau Inc. P/N 72-5-09C. Screws are #6-32 on 0.375 inch centers. 4. Connector P3 mates with Molex housing 22-01-1043 and Molex 40445 series crimp terminal. 5. Connector P4 mates with Molex housing 22-01-1023 and Molex 40445 series crimp terminal. 6. P4 is for DC fan rated 24V/0.12A (models TM200-S24, -S30, -D25), or 12V/0.2A (other models) 7. Weight: 1.40 Kgs (3.08Lbs.) approx. for U-bracket version 1.60 Kgs (3.52 Lbs.) approx. for “C” version PIN CHART P1 P2 P3 1 2 3 1, 2 3, 4, 5 6 7 8 9 1 2 3 4 TM200-S05 TM200-S15 TM200-S30 TM200-S12 TM200-S24 TM200-S48 AC LIVE AC NEUTRAL AC GROUND -SENSE RET. OUTPUT OUTPUT OUTPUT #1 +SENSE FAN COM. RET. COM. RET. PFD TM200-D23 TM200-D25 TM200-D24 AC LIVE AC NEUTRAL AC GROUND OUTPUT COM. RET. OUTPUT RET. COM. RET. PFD TM200-T30 TM200-T32 TM200-T31 TM200-T33 AC LIVE AC NEUTRAL AC GROUND OUTPUT COM. RET. OUTPUT OUTPUT RET. COM. RET. PFD TM200-Q40 TM200-Q42 TM200-Q45 TM200-Q41 TM200-Q44 AC LIVE AC NEUTRAL AC GROUND OUTPUT COM. RET. OUTPUT OUTPUT OUTPUT RETURN OUTPUT #4 FAN COM. RET. COM. RET. PFD CON PIN Product No. Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: sales@trumpower.com ● Website: www.TRUMPower.com