PS-TE200BB GREYSTONE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
PRINTED IN CANADA Copyright © Greystone Energy Systems Inc. All Rights Reserved www.greystoneenergy.com PS-TE200BBXXX-02 02/20 Greystone Energy Systems, Inc.
150 English Drive, Moncton,
New Brunswick, Canada E1E 4G7 Ph: +1 (506) 853-3057 Fax: +1 (506) 853-6014 North America: 1-800-561-5611 E-mail: mail@greystoneenergy.com DUCT TEMPERATURE SENSOR TE200BB SERIES PRODUCT DESCRIPTION The TE200BB single point duct temperature sensor utilizes a precision sensor encapsulated in a 6.35 mm (0.25”) OD, 304 series stainless steel probe and is available in various lengths (see ordering chart). All probes provide excellent heat transfer, fast response and resistance to moisture penetration. The TE200BB comes with an integrated mounting bracket and 3.05 m (10’) of plenum rated cable for connection to the Building Automation System. TYPICAL INSTALLATION For complete installation and wiring details, please refer to the product installation instructions. The duct type probes are installed through a hole in the side of the duct to monitor a single point temperature within the duct. Since the probes are tip sensitive, select a probe length that places the sensor well into the duct. Install the probe into a straight section of duct at a suitable distance downstream from any heating, cooling or humidification devices. Two holes are provided on the bracket to secure the sensor to the duct. SENSOR TYPE Thermistor or RTD (see ordering chart) TEMPERATURE RANGE -20 to 60°C (-4 to 140°F) (higher ranges available, contact Greystone) WIRE MATERIAL FT-6 rated plenum cable, 22 AWG WIRE LENGTH 3.05m (10’) PROBE MATERIAL 304 series stainless steel PROBE DIAMETER 6.35mm (0.25”) BRACKET MATERIAL ABS, UL94-V0 TERMINATION Pigtail 2 or 3 wire COUNTRY OF ORIGIN Canada SPECIFICATIONS PRODUCT TE200BB Duct Temperature Sensor SENSOR 2 100 Ω Platinum, IEC 751, 385 Alpha, thin film 1801 Ω NTC Thermistor, ±0.2°C 3000 Ω NTC Thermistor, ±0.2°C 10,000 Ω Type 3, NTC Thermistor, ±0.2°C 2.252K Ω NTC Thermistor, ±0.2°C 1000 Ω Platinum, IEC 751, 385 Alpha, thin film 1000 Ω Nickel, Class B, DIN 43760 10,000 Ω Type 3, NTC Thermistor, ±0.2°C c/w 11K shunt resistor 20,000 Ω NTC Thermistor, ±0.2°C 10,000 Ω Type 2, NTC Thermistor, ±0.2°C PROBE A2 50mm (2”) 100mm (4”) 150mm (6”) 200mm (8”) 300mm (12”) 4500mm (18”) ORDERING TE200BB PART NUMBER NOTE: Greystone Energy Systems, Inc. reserves the right to make design modifications without prior notice. 63.5mm 2.2” 27.9mm 1.1” 71.1mm 2.8” 6.35mm 0.25” 3.05mm 10’ Various Probe Lengths See Ordering Chart