TC222

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 191

Technical content

V 1.0, 2017-09 TC212 / TC213 / TC214 / TC222 / TC223 / TC224 32-Bit Single-Chip Micocontroller AC-Step 32-Bit Single-Chip Micocontroller 32-Bit Microcontroller

81726 Munich, Germany

© 2017 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in th is document shall in no event be rega rded as a guarantee of conditions or characteristics. With respect to any ex amples or hints given herein, any typi cal values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com) Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-suppo rt devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Data Sheet 3 V 1.0 2017-09

Revision History

Page or Item Subjects (major changes since previous revision) V 1.0, 2017-09 The history is documented in the last chapter

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Data Sheet 4 V 1.0 2017-09 Trademarks of Infineon Technologies AG AURIX™, C166™, CanPAK™, CI POS™, CIPURSE™, EconoPAC K™, CoolMOS™, CoolSET™, CORECONTROL™, CROSSAV E™, DAVE™, DI-POL™, EasyPIM™, EconoBRIDGE™, EconoDUAL™, EconoPIM™, EconoPACK™, EiceDRIVER™, eupec™, FCOS™, HITFET™, HybridPACK™, I²RF™, ISOFACE™, IsoPACK™, MIPAQ™, ModSTACK™, my-d™, NovalithIC™, OptiMOS™, ORIGA™, POWERCODE™; PRIMARION™, Pr imePACK™, PrimeSTACK™, PR O-SIL™, PROFET™, RASIC™, ReverSave™, SatRIC™, SI EGET™, SINDRION™, SIPMOS™, SmartL EWIS™, SOLID FLASH™, TEMPFET™, thinQ!™, TRENCHSTOP™, TriCore™. Other Trademarks Advance Design System™ (ADS) of Agilent Te chnologies, AMBA™, ARM™, MULTI-ICE™, KEIL™, PRIMECELL™, REALVIEW™, THUMB™, µVision™ of ARM Limited, UK. AUTOSAR™ is licensed by AUTOSAR development partnership. Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT Forum. COLOSSUS™, FirstGPS™ of Trimble Navigation Ltd. EMV™ of EMVC o, LLC (Visa Holdings In c.). EPCOS™ of Epcos AG. FLEXGO™ of Microsoft Corp oration. FlexRay™ is licensed by FlexRay Consortium. HYPERTERMINAL™ of Hilgraeve Incorporated. IEC™ of Commission Electrot echnique Internationale. IrDA™ of Infrared Data Association Corporation. ISO™ of INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MATLAB™ of MathWorks, Inc. MAXIM™ of Maxim Integrated Products, Inc. MICROTEC™, NUCLEUS™ of Mentor Graphics Corporation. MIPI™ of MIPI Allianc e, Inc. MIPS™ of MIPS Technologies, Inc., U SA. muRata™ of MURATA MANUFACTURING CO., MICROWAVE OFFICE™ (MWO) of Applied Wave Research Inc., OmniVision™ of OmniVision Technologies, Inc. Openwave™ Openwave Systems Inc. RED HAT™ Red Hat, Inc. RFMD™ RF Micro Devices, Inc. SIRIUS™ of Si rius Satellite Radio Inc. SOLARIS™ of Sun Microsystems, Inc. SPANSION™ of Spansion LLC Ltd. Symbian™ of Symbian Software Limited. TAIYO YUDEN™ of Taiyo Yuden Co. TEAKLITE™ of CEVA, Inc. TEKTRO NIX™ of Tektronix Inc. TOKO™ of TOKO KABUSHIKI KAISHA TA. UNIX™ of X/Open Company Limited. VERILOG™, PALLADIUM™ of Cadence Design Systems, Inc. VLYNQ™ of Texas Instruments Incorporated. VXWORKS™, WIND RIVER™ of WIND RI VER SYSTEMS, INC. ZETEX™ of Diodes Zetex Limited. Last Trademarks Update 2011-11-11

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Data Sheet TOC-1 V 1.0, 2017-09 Table of Contents

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Summary of Features Data Sheet 1-1 V 1.0 2017-09

1 Summary of Features

The TC22x / TC21x product family has the following features:

• High Performance Microcon troller with one CPU core
• Power Efficient scalar TriCore CPU (T C1.6E), having the following features: – Binary code compatibility with TC1.6P – 133 MHz operation at full temperature range – 88 Kbyte Data Scratch-Pad RAM (DSPR) – 8 Kbyte Instruction Scratch-Pad RAM (PSPR) – 8 Kbyte Instruction Cache (ICACHE) – 4 line read buffer (DRB)
• Lockstepped shadow core for TC1.6E
• Multiple on-chip memories – All embedded NVM and SRAM are ECC protected – 1 Mbyte Program Flash Memory (PFLASH) – 96 Kbyte Data Flash Memory (DFLASH) usable for EEPROM emulation – BootROM (BROM)
• 16-Channel DMA Controller with safe data transfer
• Sophisticated interrupt system (ECC protected)
• High performance on-chip bus structure – 64-bit Cross Bar Interconnect (SRI) giving fast parallel access between bus masters, CPUs and memories – 32-bit System Peripheral Bus (SPB) fo r on-chip peripheral and functional units – One bus bridge (SFI Bridge)
• Safety Management Unit (SMU) handling safety monitor alarms
• Memory Test Unit with ECC, Memory Initialization and MBIST functions (MTU)
• Hardware I/O Monitor (IOM) for checking of digital I/O
• Versatile On-chip Peripheral Units – Two Asynchronous/Synchronous Serial Channels (ASC LIN) with hardware LIN support (V1.3, V2.0, V2.1 and J2602) up to 50 MBaud – Four Queued SPI Interf ace Channels (QSPI) with master and slave capability up to 50 Mbit/s – One MultiCAN+ Module with 3 CAN nodes each and 128 free assignable message objects for high efficiency data handling via FIFO buffering and gateway data transfer – 4 Single Edge Nibble Transmission (SENT) channels for connection to sensors – One Generic Timer Module (GTM) providing a powerful se t of digital signal filtering and timer functionality to realize autonomous and complex Input/Output management – One Capture / Compare 6 module (Two kernels CCU60 and CCU61) – One General Purpose 12 Timer Unit (GPT120)
• Versatile Successive Approximation ADC (VADC) – Cluster of 2 independent ADC kernels – Input voltage range from 0 V to 5.5V (ADC supply)
• Digital programmable I/O ports
• On-chip debug support for OCDS Level 1 (CPUs, DMA, On Chip Buses)
• Four/five wire JTAG (I EEE 1149.1) or DAP (Device Access Port) interface

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Summary of Features Data Sheet 1-2 V 1.0 2017-09

• Power Management System and on-chip regulators
• Clock Generation Unit with System PLL
• Embedded Voltage Regulator

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Summary of Features Data Sheet 1-3 V 1.0 2017-09

Ordering Information

The ordering code for Infineon microcontrollers provides an exact reference to the required product. This ordering code identifies:

• The derivative itself, i.e. its function set, the temperature range, and the supply voltage
• The package and the type of delivery. For the available ordering codes for the TC212 / TC213 / TC214 / TC22 2 / TC2 23 / TC224 please refer to the “AURIX™ TC2x Data Sheet Addendum”, which summarizes all available variants. Table 1-1 Overview of TC21x / TC22x Functions Feature CPU Core Type TC1.6E E Cores / Checker Cores 1 / Max. Freq. 133 MHz FPU yes Program Flash Size 1M b y t e Data Flash Size 96 Kbyte Cache Instruction 8K b y t e Data 4 line read buffer SRAM Size TC1.6E (DSPR/PSPR)

88 Kbyte / 8 Kbyte 1)

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Summary of Features Data Sheet 1-4 V 1.0 2017-09 Safety support SMU 1 IOM 1 FFT 0 HSIC Channels 2 Embedded Voltage Regulator LDO from 3.3 V to 1.3 V Yes Low Power Feature Standby RAM Yes Packages Type PG-TQFP-80-7 / PG-TQFP-100- 23 / PG-TQFP-144-27 I/O Type 3.3 V CMOS (5V input supported on ADC pins) Tambient Range −40 … +125°C / +150°C 1) To ensure the processor cores are provided with a consta nt stream of instructions the Instruction Fetch Units will speculatively fetch instructions from the up to 64 bytes ahead of the current PC. If the current PC is within 64 bytes of the top of an instruction memory the Instruction Fetch Unit may attempt to speculatively fetch instruction from beyond the physical range. This may then lead to error conditions and alarms being triggered by the bus and memory systems. It is therefore recommended that the upper 64 bytes of any memory be unused for instruction storage. Table 1-1 Overview of TC21x / TC22x Functions Feature

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-5 V 1.0 2017-09

2 Package and Pinning Definitions

This chapter gives a pinning of the different packages of the TC212 / TC213 / TC214 / TC222 / TC223 / TC224.

2.1 PG-TQFP-80-7 Package Variant Pin Configuration of TC212 / TC222

Figure 2-1 is showing the TC212 / TC222 pinout for the package variant PG-TQFP-80-7. Figure 2-1 TC212 / TC222 Pinout for the package variant PG-TQFP-80-7 62 P15.1 63 P15.2 64 P15.3 65 P15.5 66 P14.0/B ootloader 67 P14.1/B ootloader 68 P14.3 69 P14.4 70 P14.6 72 P11.2 73 P11.3 74 P11.6 75 P11.9 76 P11.10 77 P11.11 78 P11.12 79 P10.5 80 P10.6 1P02.0 2P02.1 3P02.2 4P02.3 5P02.4 6P02.5 7P02.6 8P02.7 9P02.8 10P00.0 31P 33.5 32P 33.6 33P 33.7 34P 33.8 35P 33.9 36P 33.10 41 P23.1 46 P21.6/TDI 48 P21.7/TDO/DAP2 51 P20.2/TESTMODE 55 P20.8 56 P20.9 57 P20.11 58 P20.12 59 P20.13 60 P20.14 61 P15.0 12VDDP 3 11VDD 27VSS M 28VDDM 37VDDP3

42 V DD

45 V DDP3

54 V DD

71 V DDP 3

38N.C. 39N.C. 40N.C. 25VAGND 26VAREF

43 XTAL1

44 XTAL2

47 TMS/DAP1

49 TRST

50 TCK/DAP0

52 ESR1

53 PORST

13AN18/P41.6 14AN17/P41.5 15AN16/P41.4 16AN15/P41.3 17AN14/P41.2 18AN13/P41.1 19AN12/P41.0 20AN11/P40.11 21AN10/P 40.10 22AN9/P 40.9 23AN8/P 40.8 24AN7/P 40.7 29AN6/P 40.6 30AN5/P 40.5 TC22x (Top View)

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-6 V 1.0 2017-09

2.1.1 Port Functions and Pinning Tables

2.1.1.1 How to Read the Fol lowing Port Function Tables

Some hints for interpreting the following tables. Column “Ctrl.”: I = Input (for GPIO port Lines with IOCR bit field Selection PCx = 0XXXB) AI = Analog input O = Output O0 = Output with IOCR bit field selection PCx = 1X000B O1 = Output with IOCR bit field selection PCx = 1X001B (ALT1) O2 = Output with IOCR bit field selection PCx = 1X010B (ALT2) O3 = Output with IOCR bit field selection PCx = 1X011B (ALT3) O4 = Output with IOCR bit field selection PCx = 1X100B (ALT4) O5 = Output with IOCR bit field selection PCx = 1X101B (ALT5) O6 = Output with IOCR bit field selection PCx = 1X110B (ALT6) O7 = Output with IOCR bit field selection PCx = 1X111B (ALT7) To each input several functions can be connected. The peripherals’ configuration defines if this input is used. The port module (see corresponding chapter) decides which of the 8 output signals O0 to O7 drives the pad. Some Ox rows list more than one function, e.g. several GTM_TOUT outputs and IOM reference inputs. The GTM module (see corresponding chapter) has its own sub-multiplexer structure that defines which of the GTM sub-units drives this signal. Additionally the IOM modules “listens” on these output signals (see IOM chapter). Some pin symbol names were changed in this AURIX device compared to other AURIX devices to improve naming systematics. The previously used symbol name is documented in the “Function” column with the text “(aka …)”1). Column “Type”: IN = Input only A1 = Pad class A1 (3.3V) A1+ = Pad class A1+ (3.3V) S = ADC with digital input. Pad class D for analog input “AI”, pad class S for digital input “I”. PU = with pull-up device connected during reset (PORST = 0) PD = with pull-down device connected during reset (PORST = 0) Table 2-1 Example Port Table Pin Symbol Ctrl. Buffer Type Function 10 Pxx.y I A1 / HighZ / VDDP3 General-purpose input TIMm_n GTM_TIN TOMa_b O1 GTM_TOUT TOMc_d GTM_TOUT IOM_REFv_w IOM reference input ASCLINz_RTS O2 ASCLIN0 output (aka ARTSz) 1) “aka” as abbreviation for “also known as”.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-7 V 1.0 2017-09 High-Z = High-Z during reset (PORST = 0) Vx = Supply (the Exposed Pad is also considered as VSS and shall be connected to ground)

2.1.1.2 Tables

Port function and pinning tables. Table 2-2 Port 00 Functions Pin Symbol Ctrl. Buffer Type Function 10 P00.0 I A1 / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN CCU61_CTRAPA CCU61 input CCU60_T12HRE CCU60 input P00.0 O0 General-purpose output TOM0_8 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_4 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) IOM_REF0_9 IOM reference input ASCLIN0_SCLK O2 ASCLIN0 output (aka: ASCLK0) ASCLIN0_TX O3 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input —O 4 Reserved CAN1_TXD O5 CAN node 1 output (aka: TXDCAN1) IOM_MON2_6 IOM monitor input IOM_REF2_6 IOM reference input —O 6 Reserved CCU60_COUT63 O7 CCU60 output IOM_MON1_6 IOM monitor input IOM_REF1_0 IOM reference input

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-8 V 1.0 2017-09 Table 2-3 Port 02 Functions Pin Symbol Ctrl. Buffer Type Function 1 P02.0 I A1+ / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN SCU_REQ6 SCU input CCU60_CC60INA CCU60 input CCU61_CC60INB CCU61 input P02.0 O0 General-purpose output TOM0_8 O1 GTM_TOUT TOM1_8 GTM_TOUT TOM0_4 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) IOM_REF0_0 IOM reference input —O 2 Reserved QSPI3_SLSO1 O3 QSPI3 output (aka: SLSO31) —O 4 Reserved CAN0_TXD O5 CAN node 0 output (aka: TXDCAN0) IOM_MON2_5 IOM monitor input IOM_REF2_5 IOM reference input —O 6 Reserved CCU60_CC60 O7 CCU60 output IOM_MON1_2 IOM monitor input IOM_REF1_6 IOM reference input

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-9 V 1.0 2017-09 2 P02.1 I A1 / HighZ / VDDP3 General-purpose input TIM0_1 GTM_TIN CAN0_RXDA CAN node 0 input (aka: RXDCAN0A) SCU_REQ14 SCU input P02.1 O0 General-purpose output TOM0_9 O1 GTM_TOUT TOM1_9 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) IOM_REF0_1 IOM reference input —O 2 Reserved QSPI3_SLSO2 O3 QSPI3 output (aka: SLSO32) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_COUT60 O7 CCU60 output IOM_MON1_3 IOM monitor input IOM_REF1_3 IOM reference input Table 2-3 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-10 V 1.0 2017-09 3 P02.2 I A1+ / HighZ / VDDP3 General-purpose input TIM0_2 GTM_TIN CCU60_CC61INA CCU60 input CCU61_CC61INB CCU61 input P02.2 O0 General-purpose output TOM0_10 O1 GTM_TOUT TOM1_10 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) IOM_REF0_2 IOM reference input ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input QSPI3_SLSO3 O3 QSPI3 output (aka: SLSO33) —O 4 Reserved CAN2_TXD O5 CAN node 2 output (aka: TXDCAN2) IOM_MON2_7 IOM monitor input IOM_REF2_7 IOM reference input —O 6 Reserved CCU60_CC61 O7 CCU60 output IOM_MON1_1 IOM monitor input IOM_REF1_5 IOM reference input Table 2-3 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-11 V 1.0 2017-09 4 P02.3 I A1 / HighZ / VDDP3 General-purpose input TIM0_3 GTM_TIN ASCLIN1_RXG ASCLIN1 input (aka: ARX1G) CAN2_RXDB CAN node 2 input (aka: RXDCAN2B) P02.3 O0 General-purpose output TOM0_11 O1 GTM_TOUT TOM1_11 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) IOM_REF0_3 IOM reference input —O 2 Reserved QSPI3_SLSO4 O3 QSPI3 output (aka: SLSO34) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_COUT61 O7 CCU60 output IOM_MON1_4 IOM monitor input IOM_REF1_2 IOM reference input 5 P02.4 I A1+ / HighZ / VDDP3 General-purpose input TIM0_4 GTM_TIN QSPI3_SLSIA QSPI3 input (aka: SLSI3A) CAN0_RXDD CAN node 0 input (aka: RXDCAN0D) CCU60_CC62INA CCU60 input CCU61_CC62INB CCU61 input P02.4 O0 General-purpose output TOM0_12 O1 GTM_TOUT TOM1_12 GTM_TOUT TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) IOM_REF0_4 IOM reference input —O 2 Reserved QSPI3_SLSO0 O3 QSPI3 output (aka: SLSO30) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_CC62 O7 CCU60 output IOM_MON1_0 IOM monitor input IOM_REF1_4 IOM reference input Table 2-3 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-12 V 1.0 2017-09 6 P02.5 I A1+ / HighZ / VDDP3 General-purpose input TIM0_5 GTM_TIN QSPI3_MRSTA QSPI3 input (aka: MRST3A) SENT_SENT3C SENT input P02.5 O0 General-purpose output TOM0_13 O1 GTM_TOUT TOM1_13 GTM_TOUT TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) IOM_REF0_5 IOM reference input CAN0_TXD O2 CAN node 0 output (aka: TXDCAN0) IOM_MON2_5 IOM monitor input IOM_REF2_5 IOM reference input QSPI3_MRST O3 QSPI3 output (aka: MRST3) IOM_MON2_3 IOM monitor input IOM_REF2_3 IOM reference input —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_COUT62 O7 CCU60 output IOM_MON1_5 IOM monitor input IOM_REF1_1 IOM reference input Table 2-3 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-13 V 1.0 2017-09 7 P02.6 I A1 / HighZ / VDDP3 General-purpose input TIM0_6 GTM_TIN QSPI3_MTSRA QSPI3 input (aka: MTSR3A) SENT_SENT2C SENT input CCU60_CC60INC CCU60 input CCU60_CCPOS0A CCU60 input CCU61_T12HRB CCU61 input GPT120_T3INA GPT120 input P02.6 O0 General-purpose output TOM0_14 O1 GTM_TOUT TOM1_14 GTM_TOUT TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) IOM_REF0_6 IOM reference input —O 2 Reserved QSPI3_MTSR O3 QSPI3 output (aka: MTSR3) —O 4 Reserved VADC_EMUX00 O5 VADC output —O 6 Reserved CCU60_CC60 O7 CCU60 output IOM_MON1_2 IOM monitor input IOM_REF1_6 IOM reference input Table 2-3 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-14 V 1.0 2017-09 8 P02.7 I A1 / HighZ / VDDP3 General-purpose input TIM0_7 GTM_TIN QSPI3_SCLKA QSPI3 input (aka: SCLK3A) SENT_SENT1C SENT input CCU60_CC61INC CCU60 input CCU60_CCPOS1A CCU60 input CCU61_T13HRB CCU61 input GPT120_T3EUDA GPT120 input PMU_FDEST PMU input P02.7 O0 General-purpose output TOM0_15 O1 GTM_TOUT TOM1_15 GTM_TOUT TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) IOM_REF0_7 IOM reference input —O 2 Reserved QSPI3_SCLK O3 QSPI3 output (aka: SCLK3) —O 4 Reserved VADC_EMUX01 O5 VADC output SENT_SPC1 O6 SENT output CCU60_CC61 O7 CCU60 output IOM_MON1_1 IOM monitor input IOM_REF1_5 IOM reference input Table 2-3 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-15 V 1.0 2017-09 9 P02.8 I A1 / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN SENT_SENT0C SENT input CCU60_CC62INC CCU60 input CCU60_CCPOS2A CCU60 input CCU61_T12HRC CCU61 input CCU61_T13HRC CCU61 input GPT120_T4INA GPT120 input P02.8 O0 General-purpose output TOM0_8 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) IOM_REF0_8 IOM reference input QSPI3_SLSO5 O2 QSPI3 output (aka: SLSO35) —O 3 Reserved —O 4 Reserved VADC_EMUX02 O5 VADC output —O 6 Reserved CCU60_CC62 O7 CCU60 output IOM_MON1_0 IOM monitor input IOM_REF1_4 IOM reference input Table 2-3 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-16 V 1.0 2017-09 Table 2-4 Port 10 Functions Pin Symbol Ctrl. Buffer Type Function 79 P10.5 I A1 / HighZ / VDDP3 General-purpose input TIM0_2 GTM_TIN SCU_HWCFG4 SCU input P10.5 O0 General-purpose output TOM0_2 O1 GTM_TOUT TOM1_10 GTM_TOUT IOM_REF2_9 IOM reference input —O 2 Reserved QSPI3_SLSO8 O3 QSPI3 output (aka: SLSO38) QSPI1_SLSO9 O4 QSPI1 output (aka: SLSO19) GPT120_T6OUT O5 GPT120 output —O 6 Reserved —O 7 Reserved 80 P10.6 I A1 / HighZ / VDDP3 General-purpose input TIM0_3 GTM_TIN QSPI3_MTSRB QSPI3 input (aka: MTSR3B) SCU_HWCFG5 SCU input P10.6 O0 General-purpose output TOM0_3 O1 GTM_TOUT TOM1_11 GTM_TOUT IOM_REF2_10 IOM reference input —O 2 Reserved QSPI3_MTSR O3 QSPI3 output (aka: MTSR3) GPT120_T3OUT O4 GPT120 output —O 5 Reserved QSPI1_MRST O6 QSPI1 output (aka: MRST1) IOM_MON2_1 IOM monitor input IOM_REF2_1 IOM reference input —O 7 Reserved

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-17 V 1.0 2017-09 Table 2-5 Port 11 Functions Pin Symbol Ctrl. Buffer Type Function 72 P11.2 I A1+ / HighZ / VDDP3 General-purpose input P11.2 O0 General-purpose output TOM0_8 O1 GTM_TOUT TOM1_1 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) —O 2 Reserved QSPI0_SLSO5 O3 QSPI0 output (aka: SLSO05) QSPI1_SLSO5 O4 QSPI1 output (aka: SLSO15) CCU61_COUT63 O5 CCU61 output IOM_MON1_7 IOM monitor input IOM_REF1_7 IOM reference input —O 6 Reserved CCU60_COUT63 O7 CCU60 output IOM_MON1_6 IOM monitor input IOM_REF1_0 IOM reference input 73 P11.3 I A1+ / HighZ / VDDP3 General-purpose input QSPI1_MRSTB QSPI1 input (aka: MRST1B) P11.3 O0 General-purpose output TOM0_10 O1 GTM_TOUT TOM1_2 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) —O 2 Reserved QSPI1_MRST O3 QSPI1 output (aka: MRST1) IOM_MON2_1 IOM monitor input IOM_REF2_1 IOM reference input —O 4 Reserved CCU61_COUT62 O5 CCU61 output IOM_MON1_13 IOM monitor input IOM_REF1_8 IOM reference input —O 6 Reserved CCU60_COUT62 O7 CCU60 output IOM_MON1_5 IOM monitor input IOM_REF1_1 IOM reference input

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-18 V 1.0 2017-09 74 P11.6 I A1+ / HighZ / VDDP3 General-purpose input QSPI1_SCLKB QSPI1 input (aka: SCLK1B) P11.6 O0 General-purpose output TOM0_11 O1 GTM_TOUT TOM1_3 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) —O 2 Reserved QSPI1_SCLK O3 QSPI1 output (aka: SCLK1) —O 4 Reserved CCU61_COUT61 O5 CCU61 output IOM_MON1_12 IOM monitor input IOM_REF1_9 IOM reference input —O 6 Reserved CCU60_COUT61 O7 CCU60 output IOM_MON1_4 IOM monitor input IOM_REF1_2 IOM reference input 75 P11.9 I A1+ / HighZ / VDDP3 General-purpose input QSPI1_MTSRB QSPI1 input (aka: MTSR1B) P11.9 O0 General-purpose output TOM0_12 O1 GTM_TOUT TOM1_4 GTM_TOUT (= DTM5_OUT4) TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) —O 2 Reserved QSPI1_MTSR O3 QSPI1 output (aka: MTSR1) —O 4 Reserved CCU61_COUT60 O5 CCU61 output IOM_MON1_11 IOM monitor input IOM_REF1_10 IOM reference input —O 6 Reserved CCU60_COUT60 O7 CCU60 output IOM_MON1_3 IOM monitor input IOM_REF1_3 IOM reference input Table 2-5 Port 11 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-19 V 1.0 2017-09 76 P11.10 I A1+ / HighZ / VDDP3 General-purpose input ASCLIN1_RXE ASCLIN1 input (aka: ARX1E) SCU_REQ12 SCU input P11.10 O0 General-purpose output TOM0_13 O1 GTM_TOUT TOM1_5 GTM_TOUT (= DTM5_OUT5) TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) —O 2 Reserved QSPI0_SLSO3 O3 QSPI0 output (aka: SLSO03) QSPI1_SLSO3 O4 QSPI1 output (aka: SLSO13) CCU61_CC62 O5 CCU61 output IOM_MON1_10 IOM monitor input IOM_REF1_11 IOM reference input —O 6 Reserved CCU60_CC62 O7 CCU60 output IOM_MON1_0 IOM monitor input IOM_REF1_4 IOM reference input 77 P11.11 I A1+ / HighZ / VDDP3 General-purpose input P11.11 O0 General-purpose output TOM0_14 O1 GTM_TOUT TOM1_6 GTM_TOUT (= DTM5_OUT6) TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) —O 2 Reserved QSPI0_SLSO4 O3 QSPI0 output (aka: SLSO04) QSPI1_SLSO4 O4 QSPI1 output (aka: SLSO14) CCU61_CC61 O5 CCU61 output IOM_MON1_9 IOM monitor input IOM_REF1_12 IOM reference input —O 6 Reserved CCU60_CC61 O7 CCU60 output IOM_MON1_1 IOM monitor input IOM_REF1_5 IOM reference input Table 2-5 Port 11 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-20 V 1.0 2017-09 78 P11.12 I A1+ / HighZ / VDDP3 General-purpose input P11.12 O0 General-purpose output TOM0_15 O1 GTM_TOUT TOM1_7 GTM_TOUT (= DTM5_OUT7) TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input GTM_CLK2 O3 GTM output —O 4 Reserved CCU61_CC60 O5 CCU61 output IOM_MON1_8 IOM monitor input IOM_REF1_13 IOM reference input SCU_EXTCLK1 O6 SCU output CCU60_CC60 O7 CCU60 output IOM_MON1_2 IOM monitor input IOM_REF1_6 IOM reference input Table 2-5 Port 11 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-21 V 1.0 2017-09 Table 2-6 Port 14 Functions Pin Symbol Ctrl. Buffer Type Function 66 P14.0 I A1+ / HighZ / VDDP3 General-purpose input TIM0_3 GTM_TIN P14.0 O0 General-purpose output TOM0_3 O1 GTM_TOUT TOM1_3 GTM_TOUT TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) ASCLIN0_TX O2 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input —O 3 Reserved —O 4 Reserved CAN1_TXD O5 CAN node 1 output (aka: TXDCAN1) IOM_MON2_6 IOM monitor input IOM_REF2_6 IOM reference input ASCLIN0_SCLK O6 ASCLIN0 output (aka: ASCLK0) CCU60_COUT62 O7 CCU60 output IOM_MON1_5 IOM monitor input IOM_REF1_1 IOM reference input

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-22 V 1.0 2017-09 67 P14.1 I A1+ / HighZ / VDDP3 General-purpose input TIM0_4 GTM_TIN ASCLIN0_RXA ASCLIN0 input (aka: ARX0A) CAN1_RXDB CAN node 1 input (aka: RXDCAN1B) SCU_REQ15 SCU input SCU_EVRWUPA AI SCU input P14.1 O0 General-purpose output TOM0_4 O1 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) IOM_REF1_14 IOM reference input ASCLIN0_TX O2 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_COUT63 O7 CCU60 output IOM_MON1_6 IOM monitor input IOM_REF1_0 IOM reference input 68 P14.3 I A1 / PU / VDDP3 General-purpose input TIM0_6 GTM_TIN SCU_REQ10 SCU input SCU_HWCFG3_BMI SCU input P14.3 O0 General-purpose output TOM0_6 O1 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) IOM_REF2_4 IOM reference input —O 2 Reserved QSPI2_SLSO3 O3 QSPI2 output (aka: SLSO23) ASCLIN1_SLSO O4 ASCLIN1 output (aka: ASLSO1) —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-6 Port 14 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-23 V 1.0 2017-09 69 P14.4 I A1+ / HighZ / VDDP3 General-purpose input TIM0_7 GTM_TIN P14.4 O0 General-purpose output TOM0_7 O1 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) IOM_REF2_8 IOM reference input —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved 70 P14.6 I A1+ / PU / VDDP3 General-purpose input TIM0_1 GTM_TIN QSPI0_MRSTD QSPI0 input (aka: MRST0D) P14.6 O0 General-purpose output TOM0_1 O1 GTM_TOUT TOM1_1 GTM_TOUT IOM_REF2_14 IOM reference input —O 2 Reserved QSPI2_SLSO2 O3 QSPI2 output (aka: SLSO22) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-6 Port 14 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-24 V 1.0 2017-09 Table 2-7 Port 15 Functions Pin Symbol Ctrl. Buffer Type Function 61 P15.0 I A1 / HighZ / VDDP3 General-purpose input P15.0 O0 General-purpose output TOM1_3 O1 GTM_TOUT TOM0_11 GTM_TOUT TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input QSPI0_SLSO13 O3 QSPI0 output (aka: SLSO013) —O 4 Reserved CAN2_TXD O5 CAN node 2 output (aka: TXDCAN2) IOM_MON2_7 IOM monitor input IOM_REF2_7 IOM reference input ASCLIN1_SCLK O6 ASCLIN1 output (aka: ASCLK1) —O 7 Reserved 62 P15.1 I A1 / HighZ / VDDP3 General-purpose input ASCLIN1_RXA ASCLIN1 input (aka: ARX1A) QSPI2_SLSIB QSPI2 input (aka: SLSI2B) CAN2_RXDA CAN node 2 input (aka: RXDCAN2A) SCU_REQ16 SCU input SCU_EVRWUPB AI SCU input P15.1 O0 General-purpose output TOM1_4 O1 GTM_TOUT (= DTM5_OUT4) TOM0_12 GTM_TOUT TOM0_4 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input QSPI2_SLSO5 O3 QSPI2 output (aka: SLSO25) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-25 V 1.0 2017-09 63 P15.2 I A1 / HighZ / VDDP3 General-purpose input QSPI2_MRSTE QSPI2 input (aka: MRST2E) QSPI2_SLSIA QSPI2 input (aka: SLSI2A) QSPI2_HSICINA QSPI2 input (aka: HSIC2INA) P15.2 O0 General-purpose output TOM1_5 O1 GTM_TOUT (= DTM5_OUT5) TOM0_13 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) ASCLIN0_TX O2 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input QSPI2_SLSO0 O3 QSPI2 output (aka: SLSO20) —O 4 Reserved CAN1_TXD O5 CAN node 1 output (aka: TXDCAN1) IOM_MON2_6 IOM monitor input IOM_REF2_6 IOM reference input ASCLIN0_SCLK O6 ASCLIN0 output (aka: ASCLK0) —O 7 Reserved 64 P15.3 I A1 / HighZ / VDDP3 General-purpose input ASCLIN0_RXB ASCLIN0 input (aka: ARX0B) QSPI2_SCLKA QSPI2 input (aka: SCLK2A) QSPI2_HSICINB QSPI2 input (aka: HSIC2INB) CAN1_RXDA CAN node 1 input (aka: RXDCAN1A) P15.3 O0 General-purpose output TOM1_6 O1 GTM_TOUT (= DTM5_OUT6) TOM0_14 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) ASCLIN0_TX O2 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input QSPI2_SCLK O3 QSPI2 output (aka: SCLK2) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-7 Port 15 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-26 V 1.0 2017-09 65 P15.5 I A1 / HighZ / VDDP3 General-purpose input ASCLIN1_RXB ASCLIN1 input (aka: ARX1B) QSPI2_MTSRA QSPI2 input (aka: MTSR2A) SCU_REQ13 SCU input P15.5 O0 General-purpose output TOM0_0 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input QSPI2_MTSR O3 QSPI2 output (aka: MTSR2) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_CC61 O7 CCU60 output IOM_MON1_1 IOM monitor input IOM_REF1_5 IOM reference input Table 2-8 Port 20 Functions Pin Symbol Ctrl. Buffer Type Function 51 P20.2 I Input Only / PU / VDDP3 General-purpose input TESTMODE Factory Test Mode Enable Table 2-7 Port 15 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-27 V 1.0 2017-09 55 P20.8 I A1 / HighZ / VDDP3 General-purpose input TIM0_7 GTM_TIN P20.8 O0 General-purpose output TOM1_7 O1 GTM_TOUT (= DTM5_OUT7) TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM0_4 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) IOM_MON2_8 IOM monitor input ASCLIN1_SLSO O2 ASCLIN1 output (aka: ASLSO1) QSPI0_SLSO0 O3 QSPI0 output (aka: SLSO00) QSPI1_SLSO0 O4 QSPI1 output (aka: SLSO10) CAN0_TXD O5 CAN node 0 output (aka: TXDCAN0) IOM_MON2_5 IOM monitor input IOM_REF2_5 IOM reference input SCU_WDT0LCK O6 SCU output CCU61_CC60 O7 CCU61 output IOM_MON1_8 IOM monitor input IOM_REF1_13 IOM reference input 56 P20.9 I A1 / HighZ / VDDP3 General-purpose input ASCLIN1_RXC ASCLIN1 input (aka: ARX1C) QSPI0_SLSIB QSPI0 input (aka: SLSI0B) SCU_REQ11 SCU input P20.9 O0 General-purpose output TOM1_13 O1 GTM_TOUT TOM0_13 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) IOM_MON2_11 IOM monitor input —O 2 Reserved QSPI0_SLSO1 O3 QSPI0 output (aka: SLSO01) QSPI1_SLSO1 O4 QSPI1 output (aka: SLSO11) —O 5 Reserved SCU_WDTSLCK O6 SCU output CCU61_CC61 O7 CCU61 output IOM_MON1_9 IOM monitor input IOM_REF1_12 IOM reference input Table 2-8 Port 20 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-28 V 1.0 2017-09 57 P20.11 I A1+ / HighZ / VDDP3 General-purpose input QSPI0_SCLKA QSPI0 input (aka: SCLK0A) P20.11 O0 General-purpose output TOM1_15 O1 GTM_TOUT TOM0_15 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) IOM_MON2_15 IOM monitor input —O 2 Reserved QSPI0_SCLK O3 QSPI0 output (aka: SCLK0) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU61_COUT60 O7 CCU61 output IOM_MON1_11 IOM monitor input IOM_REF1_10 IOM reference input 58 P20.12 I A1 / HighZ / VDDP3 General-purpose input QSPI0_MRSTA QSPI0 input (aka: MRST0A) IOM_PIN13 IOM pad input P20.12 O0 General-purpose output TOM1_0 O1 GTM_TOUT TOM0_8 GTM_TOUT TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) IOM_MON0_13 IOM monitor input —O 2 Reserved QSPI0_MRST O3 QSPI0 output (aka: MRST0) IOM_MON2_0 IOM monitor input IOM_REF2_0 IOM reference input QSPI0_MTSR O4 QSPI0 output (aka: MTSR0) —O 5 Reserved —O 6 Reserved CCU61_COUT61 O7 CCU61 output IOM_MON1_12 IOM monitor input IOM_REF1_9 IOM reference input Table 2-8 Port 20 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-29 V 1.0 2017-09 59 P20.13 I A1+ / HighZ / VDDP3 General-purpose input QSPI0_SLSIA QSPI0 input (aka: SLSI0A) IOM_PIN14 IOM pad input P20.13 O0 General-purpose output TOM1_1 O1 GTM_TOUT TOM0_9 GTM_TOUT TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) IOM_MON0_14 IOM monitor input —O 2 Reserved QSPI0_SLSO2 O3 QSPI0 output (aka: SLSO02) QSPI1_SLSO2 O4 QSPI1 output (aka: SLSO12) QSPI0_SCLK O5 QSPI0 output (aka: SCLK0) —O 6 Reserved CCU61_COUT62 O7 CCU61 output IOM_MON1_13 IOM monitor input IOM_REF1_8 IOM reference input 60 P20.14 I A1+ / HighZ / VDDP3 General-purpose input QSPI0_MTSRA QSPI0 input (aka: MTSR0A) IOM_PIN15 IOM pad input P20.14 O0 General-purpose output TOM1_2 O1 GTM_TOUT TOM0_10 GTM_TOUT TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) IOM_MON0_15 IOM monitor input —O 2 Reserved QSPI0_MTSR O3 QSPI0 output (aka: MTSR0) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-8 Port 20 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-30 V 1.0 2017-09 Table 2-9 Port 21 Functions Pin Symbol Ctrl. Buffer Type Function 46 P21.6 I A1 / PU / VDDP3 General-purpose input TIM0_4 GTM_TIN TDI OCDS input OCDS_TGI2 OCDS input GPT120_T5EUDA GPT120 input P21.6 O0 General-purpose output TOM0_4 O1 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved GPT120_T3OUT O7 GPT120 output OCDS_TGO2 O OCDS 48 P21.7 I A1+ / PU / VDDP3 General-purpose input TIM0_5 GTM_TIN OCDS_DAP2 OCDS input OCDS_TGI3 OCDS input GPT120_T5INA GPT120 input P21.7 O0 General-purpose output TOM0_5 O1 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved GPT120_T6OUT O7 GPT120 output OCDS_TGO3 O OCDS OCDS_DAP2 O OCDS Output TDO O JTAG Output

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-31 V 1.0 2017-09 Table 2-10 Port 23 Functions Pin Symbol Ctrl. Buffer Type Function 41 P23.1 I A1+ / HighZ / VDDP3 General-purpose input TIM0_6 GTM_TIN P23.1 O0 General-purpose output TOM0_6 O1 GTM_TOUT (= DTM1_OUT6) TOM0_15 GTM_TOUT ASCLIN1_RTS O2 ASCLIN1 output (aka: ARTS1) QSPI3_SLSO13 O3 QSPI3 output (aka: SLSO313) GTM_CLK0 O4 GTM output SCU_EXTCLK1 O5 SCU output SCU_EXTCLK0 O6 SCU output —O 7 Reserved Table 2-11 Port 33 Functions Pin Symbol Ctrl. Buffer Type Function 31 P33.5 I A1 / HighZ / VDDP3 General-purpose input TIM0_1 GTM_TIN CCU61_CCPOS2C CCU61 input GPT120_T4EUDB GPT120 input IOM_PIN5 IOM pad input P33.5 O0 General-purpose output TOM0_1 O1 GTM_TOUT TOM1_1 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) IOM_MON0_5 IOM monitor input QSPI0_SLSO7 O2 QSPI0 output (aka: SLSO07) QSPI1_SLSO7 O3 QSPI1 output (aka: SLSO17) —O 4 Reserved VADC_EMUX11 O5 VADC output VADC_G0BFL1 O6 VADC output CCU61_CC60 O7 CCU61 output IOM_MON1_8 IOM monitor input IOM_REF1_13 IOM reference input

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-32 V 1.0 2017-09 32 P33.6 I A1 / HighZ / VDDP3 General-purpose input TIM0_2 GTM_TIN ASCLIN1_RXF ASCLIN1 input (aka: ARX1F) CCU61_CCPOS1C CCU61 input GPT120_T2EUDB GPT120 input IOM_PIN6 IOM pad input P33.6 O0 General-purpose output TOM0_2 O1 GTM_TOUT TOM1_2 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) IOM_MON0_6 IOM monitor input —O 2 Reserved —O 3 Reserved ASCLIN1_TX O4 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input VADC_EMUX10 O5 VADC output VADC_G0BFL2 O6 VADC output CCU61_CC61 O7 CCU61 output IOM_MON1_9 IOM monitor input IOM_REF1_12 IOM reference input Table 2-11 Port 33 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-33 V 1.0 2017-09 33 P33.7 I A1+ / HighZ / VDDP3 General-purpose input TIM0_3 GTM_TIN CAN0_RXDE CAN node 0 input (aka: RXDCAN0E) SCU_REQ8 SCU input CCU61_CCPOS0C CCU61 input GPT120_T2INB GPT120 input IOM_PIN7 IOM pad input P33.7 O0 General-purpose output TOM0_3 O1 GTM_TOUT TOM1_3 GTM_TOUT TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) IOM_MON0_7 IOM monitor input —O 2 Reserved QSPI3_SLSO7 O3 QSPI3 output (aka: SLSO37) —O 4 Reserved —O 5 Reserved VADC_G0BFL3 O6 VADC output CCU61_COUT60 O7 CCU61 output IOM_MON1_11 IOM monitor input IOM_REF1_10 IOM reference input Table 2-11 Port 33 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-34 V 1.0 2017-09 34 P33.8 I A1+ / HighZ / VDDP3 General-purpose input TIM0_4 GTM_TIN SCU_EMGSTOPA SCU input IOM_PIN8 IOM pad input P33.8 O0 General-purpose output TOM0_4 O1 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) IOM_MON0_8 IOM monitor input —O 2 Reserved QSPI3_SLSO2 O3 QSPI3 output (aka: SLSO32) —O 4 Reserved CAN0_TXD O5 CAN node 0 output (aka: TXDCAN0) IOM_MON2_5 IOM monitor input IOM_REF2_5 IOM reference input —O 6 Reserved CCU61_COUT62 O7 CCU61 output IOM_MON1_13 IOM monitor input IOM_REF1_8 IOM reference input SMU_FSP O SMU Table 2-11 Port 33 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-35 V 1.0 2017-09 35 P33.9 I A1 / HighZ / VDDP3 General-purpose input TIM0_1 GTM_TIN QSPI3_HSICINA QSPI3 input (aka: HSIC3INA) IOM_PIN9 IOM pad input P33.9 O0 General-purpose output TOM0_1 O1 GTM_TOUT TOM1_1 GTM_TOUT TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) IOM_MON0_9 IOM monitor input —O 2 Reserved QSPI3_SLSO1 O3 QSPI3 output (aka: SLSO31) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU61_CC62 O7 CCU61 output IOM_MON1_10 IOM monitor input IOM_REF1_11 IOM reference input 36 P33.10 I A1+ / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN QSPI3_SLSIC QSPI3 input (aka: SLSI3C) QSPI3_HSICINB QSPI3 input (aka: HSIC3INB) IOM_PIN10 IOM pad input P33.10 O0 General-purpose output TOM0_0 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) IOM_MON0_10 IOM monitor input QSPI1_SLSO6 O2 QSPI1 output (aka: SLSO16) QSPI3_SLSO11 O3 QSPI3 output (aka: SLSO311) ASCLIN1_SLSO O4 ASCLIN1 output (aka: ASLSO1) GTM_CLK1 O5 GTM output SCU_EXTCLK1 O6 SCU output CCU61_COUT61 O7 CCU61 output IOM_MON1_12 IOM monitor input IOM_REF1_9 IOM reference input Table 2-11 Port 33 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-36 V 1.0 2017-09 Table 2-12 Port 40 Functions Pin Symbol Ctrl. Buffer Type Function 30 P40.5 I S / VDDM General-purpose input VADCG0_5 AI VADC input channel 5 of group 0 29 P40.6 I S / VDDM General-purpose input VADCG0_6 AI VADC input channel 6 of group 0 24 P40.7 I S / VDDM General-purpose input VADCG0_7 AI VADC input channel 7 of group 0 (with pull down diagnostics) 23 P40.8 I S / VDDM General-purpose input VADCG0_8 AI VADC input channel 8 of group 0 22 P40.9 I S / VDDM General-purpose input VADCG0_9 AI VADC input channel 9 of group 0 (with multiplexer diagnostics) 21 P40.10 I S / VDDM General-purpose input VADCG0_10 AI VADC input channel 10 of group 0 (with multiplexer diagnostics) 20 P40.11 I S / VDDM General-purpose input SENT_SENT0A SENT input CCU60_CCPOS0D CCU60 input VADCG0_11 AI VADC input channel 11 of group 0 Table 2-13 Port 41 Functions Pin Symbol Ctrl. Buffer Type Function 19 P41.0 I S / VDDM General-purpose input SENT_SENT1A SENT input CCU60_CCPOS1B CCU60 input VADCG1_0 AI VADC input channel 0 of group 1 18 P41.1 I S / VDDM General-purpose input VADCG1_1 AI VADC input channel 1 of group 1 (with multiplexer diagnostics) 17 P41.2 I S / VDDM General-purpose input SENT_SENT2A SENT input CCU61_CCPOS1B CCU61 input VADCG1_2 AI VADC input channel 2 of group 1 (with multiplexer diagnostics)

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-80-7 Package Variant Pin Data Sheet 2-37 V 1.0 2017-09 16 P41.3 I S / VDDM General-purpose input SENT_SENT3A SENT input CCU61_CCPOS1D CCU61 input VADCG1_3 AI VADC input channel 3 of group 1 (with pull down diagnostics) 15 P41.4 I S / VDDM General-purpose input VADCG1_4 AI VADC input channel 4 of group 1 14 P41.5 I S / VDDM General-purpose input VADCG1_5 AI VADC input channel 5 of group 1 13 P41.6 I S / VDDM General-purpose input VADCG1_6 AI VADC input channel 6 of group 1 Table 2-14 System I/O Pin Symbol Ctrl. Buffer Type Function

43 XTAL1 I VDDP3 Main Oscillator/PLL/Clock Generator Input

44 XTAL2 O VDDP3 Main Oscillator/PLL/Clock Generator Output

47 TMS/DAP1 I A1+ / PD /

DAP1 I/O Device Access Port LIne 1

49 TRST I Input Only

/ PD / VDDP3 JTAG Module Reset/Enable Input

50 TCK/DAP0 I Input Only

/ PD / VDDP3 OCDS input DAP0 I Device Access Port LIne 0

53 PORST I Input Only

/ PD / VDDP3 Power On Reset Additional strong PD in case of power fail. Table 2-15 Supply Pin Symbol Ctrl. Buffer Type Function

25 V AGND I— Negative Analog Reference Voltage 0

26 V AREF I— Positive Analog Reference Voltage 0

12 V DDP3 I— Digital I/O Power Supply (3.3V) 11 V DD I— Digital Core Power Supply (1.3V)

27 V SSM I— Analog Ground for VDDM

Table 2-13 Port 41 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-38 V 1.0 2017-09

2.1.2 Pull-Up/Pull-Down R eset Behavior of the Pins

2.2 PG-TQFP-100-23 Packag e Variant Pin Configuration of TC213 / TC223

Figure 2-1 is showing the TC213 / TC223 pinout for the package variant: PG-TQFP-100-23. 28 V DDM I— ADC Power Supply (5.0V) 37 V DDP3 I— Digital I/O Power Supply (3.3V) 42 V DD I— Digital Core Power Supply (1.3V) This pin supplies also the main XTAL Oscillator/PLL (1.3V). A higher decoupling capacitor is therefore recommended to the VSS pin for better noise immunity. 45 V DDP3 I— Digital I/O Power Supply (3.3V) This pin supplies also the main XTAL Oscillator/PLL (3.3V). A higher decoupling capacitor is therefore recommended to the VSS pin for better noise immunity. 54 V DD I— Digital Core Power Supply (1.3V) 71 V DDP3 I— Digital I/O Power Supply (3.3V) This pin supplies also the Flash 3.3V. Table 2-16 List of Pull-Up/Pull-Down Reset Behavior of the Pins Pins PORST = 0 PORST = 1 all GPIOs High-Z TDI, TESTMODE Pull-up PORST1) 1) Pull-down with IPORST relevant is always activated when a primary supply monitor detects a violation. Pull-down with IPORST relevant Pull-down with IPDLI relevant TRST, TCK, TMS Pull-down ESR0 The open-drain driver is used to drive low.2) 2) Valid additionally after deactivation of PORST until the inter nal reset phase has finished. See the SCU chapter for details. Pull-up3) 3) See the SCU_IOCR register description. ESR1 Pull-up3) P14.2, P14.3, P14.6 Pull-up P21.7 / TDO Pull-up High-Z/Pull-up 4) 4) Depends on JTAG/DAP selection with TRST . Table 2-15 Supply (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-39 V 1.0 2017-09 Figure 2-2 TC213 / TC223 Pinout for the package variant: PG-TQFP-100-23. 77 P15.1 78 P15.2 79 P15.3 80 P15.5 81 P14.0/B ootloader 82 P14.1/B ootloader 83 P14.3 84 P14.4 85 P14.6 87 P13.0 88 P13.1 89 P13.2 90 P13.3 91 P11.2 92 P11.3 93 P11.6 94 P11.9 95 P11.8 96 P11.10 97 P11.11 98 P11.12 99 P10.5 100 P10.6 1P02.0 2P02.1 3P02.2 4P02.3 5P02.4 6P02.5 7P02.6 8P02.7 9P02.8 10P00.0 41P 33.5 42P 33.6 43P 33.7 44P 33.8 45P 33.9 46P 33.10 51 P23.1 56 P21.2 57 P21.3 58 P21.4 59 P21.6/TDI 61 P21.7/TDO/DAP2 64 P20.2/TESTMODE 69 P20.8 70 P20.9 71 P20.10 72 P20.11 73 P20.12 74 P20.13 75 P20.14 76 P15.0

86 V DDP 3

52 V DD

55 V DDP3

68 V DD

48N.C. 49N.C. 50N.C. 30VAGND 31VAREF

53 XTAL1

54 XTAL2

60 TMS/DAP1

62 TRST

63 TCK/ DAP0

65 ESR1

66 PORST

67 ESR0

13AN23/P41.11 14AN22/P41.10 15AN21/P41.9 16AN20/P41.8 17AN19/P41.7 18AN18/P41.6 19AN17/P41.5 20AN16/P41.4 21AN15/P41.3 22AN14/P41.2 23AN13/P41.1 24AN12/P41.0 25AN11/P40.11 26AN10/P 40.10 27AN9/P 40.9 28AN8/P 40.8 29AN7/P 40.7 34AN6/P 40.6 35AN5/P 40.5 36AN4/P 40.4 37AN3/P 40.3 38AN2/P 40.2 39AN1/P 40.1 40AN0/P 40.0 TC22x (Top View )

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-40 V 1.0 2017-09

2.2.1 Port Functions and Pinning Tables

2.2.1.1 How to Read the Fol lowing Port Function Tables

Some hints for interpreting the following tables. Column “Ctrl.”: I = Input (for GPIO port Lines with IOCR bit field Selection PCx = 0XXXB) AI = Analog input O = Output O0 = Output with IOCR bit field selection PCx = 1X000B O1 = Output with IOCR bit field selection PCx = 1X001B (ALT1) O2 = Output with IOCR bit field selection PCx = 1X010B (ALT2) O3 = Output with IOCR bit field selection PCx = 1X011B (ALT3) O4 = Output with IOCR bit field selection PCx = 1X100B (ALT4) O5 = Output with IOCR bit field selection PCx = 1X101B (ALT5) O6 = Output with IOCR bit field selection PCx = 1X110B (ALT6) O7 = Output with IOCR bit field selection PCx = 1X111B (ALT7) To each input several functions can be connected. The peripherals’ configuration defines if this input is used. The port module (see corresponding chapter) decides which of the 8 output signals O0 to O7 drives the pad. Some Ox rows list more than one function, e.g. several GTM_TOUT outputs and IOM reference inputs. The GTM module (see corresponding chapter) has its own sub-multiplexer structure that defines which of the GTM sub-units drives this signal. Additionally the IOM modules “listens” on these output signals (see IOM chapter). Some pin symbol names were changed in this AURIX device compared to other AURIX devices to improve naming systematics. The previously used symbol name is documented in the “Function” column with the text “(aka …)”1). Column “Type”: IN = Input only A1 = Pad class A1 (3.3V) A1+ = Pad class A1+ (3.3V) S = ADC with digital input. Pad class D for analog input “AI”, pad class S for digital input “I”. PU = with pull-up device connected during reset (PORST = 0) PD = with pull-down device connected during reset (PORST = 0) Table 2-17 Example Port Table Pin Symbol Ctrl. Buffer Type Function 10 Pxx.y I A1 / HighZ / VDDP3 General-purpose input TIMm_n GTM_TIN TOMa_b O1 GTM_TOUT TOMc_d GTM_TOUT IOM_REFv_w IOM reference input ASCLINz_RTS O2 ASCLIN0 output (aka ARTSz) 1) “aka” as abbreviation for “also known as”.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-41 V 1.0 2017-09 High-Z = High-Z during reset (PORST = 0) Vx = Supply (the Exposed Pad is also considered as VSS and shall be connected to ground)

2.2.1.2 Tables

Port function and pinning tables. Table 2-18 Port 00 Functions Pin Symbol Ctrl. Buffer Type Function 10 P00.0 I A1 / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN CCU61_CTRAPA CCU61 input CCU60_T12HRE CCU60 input P00.0 O0 General-purpose output TOM0_8 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_4 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) IOM_REF0_9 IOM reference input ASCLIN0_SCLK O2 ASCLIN0 output (aka: ASCLK0) ASCLIN0_TX O3 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input —O 4 Reserved CAN1_TXD O5 CAN node 1 output (aka: TXDCAN1) IOM_MON2_6 IOM monitor input IOM_REF2_6 IOM reference input —O 6 Reserved CCU60_COUT63 O7 CCU60 output IOM_MON1_6 IOM monitor input IOM_REF1_0 IOM reference input

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-42 V 1.0 2017-09 Table 2-19 Port 02 Functions Pin Symbol Ctrl. Buffer Type Function 1 P02.0 I A1+ / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN SCU_REQ6 SCU input CCU60_CC60INA CCU60 input CCU61_CC60INB CCU61 input P02.0 O0 General-purpose output TOM0_8 O1 GTM_TOUT TOM1_8 GTM_TOUT TOM0_4 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) IOM_REF0_0 IOM reference input —O 2 Reserved QSPI3_SLSO1 O3 QSPI3 output (aka: SLSO31) —O 4 Reserved CAN0_TXD O5 CAN node 0 output (aka: TXDCAN0) IOM_MON2_5 IOM monitor input IOM_REF2_5 IOM reference input —O 6 Reserved CCU60_CC60 O7 CCU60 output IOM_MON1_2 IOM monitor input IOM_REF1_6 IOM reference input

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-43 V 1.0 2017-09 2 P02.1 I A1 / HighZ / VDDP3 General-purpose input TIM0_1 GTM_TIN CAN0_RXDA CAN node 0 input (aka: RXDCAN0A) SCU_REQ14 SCU input P02.1 O0 General-purpose output TOM0_9 O1 GTM_TOUT TOM1_9 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) IOM_REF0_1 IOM reference input —O 2 Reserved QSPI3_SLSO2 O3 QSPI3 output (aka: SLSO32) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_COUT60 O7 CCU60 output IOM_MON1_3 IOM monitor input IOM_REF1_3 IOM reference input Table 2-19 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-44 V 1.0 2017-09 3 P02.2 I A1+ / HighZ / VDDP3 General-purpose input TIM0_2 GTM_TIN CCU60_CC61INA CCU60 input CCU61_CC61INB CCU61 input P02.2 O0 General-purpose output TOM0_10 O1 GTM_TOUT TOM1_10 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) IOM_REF0_2 IOM reference input ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input QSPI3_SLSO3 O3 QSPI3 output (aka: SLSO33) —O 4 Reserved CAN2_TXD O5 CAN node 2 output (aka: TXDCAN2) IOM_MON2_7 IOM monitor input IOM_REF2_7 IOM reference input —O 6 Reserved CCU60_CC61 O7 CCU60 output IOM_MON1_1 IOM monitor input IOM_REF1_5 IOM reference input Table 2-19 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-45 V 1.0 2017-09 4 P02.3 I A1 / HighZ / VDDP3 General-purpose input TIM0_3 GTM_TIN ASCLIN1_RXG ASCLIN1 input (aka: ARX1G) CAN2_RXDB CAN node 2 input (aka: RXDCAN2B) P02.3 O0 General-purpose output TOM0_11 O1 GTM_TOUT TOM1_11 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) IOM_REF0_3 IOM reference input —O 2 Reserved QSPI3_SLSO4 O3 QSPI3 output (aka: SLSO34) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_COUT61 O7 CCU60 output IOM_MON1_4 IOM monitor input IOM_REF1_2 IOM reference input 5 P02.4 I A1+ / HighZ / VDDP3 General-purpose input TIM0_4 GTM_TIN QSPI3_SLSIA QSPI3 input (aka: SLSI3A) CAN0_RXDD CAN node 0 input (aka: RXDCAN0D) CCU60_CC62INA CCU60 input CCU61_CC62INB CCU61 input P02.4 O0 General-purpose output TOM0_12 O1 GTM_TOUT TOM1_12 GTM_TOUT TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) IOM_REF0_4 IOM reference input —O 2 Reserved QSPI3_SLSO0 O3 QSPI3 output (aka: SLSO30) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_CC62 O7 CCU60 output IOM_MON1_0 IOM monitor input IOM_REF1_4 IOM reference input Table 2-19 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-46 V 1.0 2017-09 6 P02.5 I A1+ / HighZ / VDDP3 General-purpose input TIM0_5 GTM_TIN QSPI3_MRSTA QSPI3 input (aka: MRST3A) SENT_SENT3C SENT input P02.5 O0 General-purpose output TOM0_13 O1 GTM_TOUT TOM1_13 GTM_TOUT TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) IOM_REF0_5 IOM reference input CAN0_TXD O2 CAN node 0 output (aka: TXDCAN0) IOM_MON2_5 IOM monitor input IOM_REF2_5 IOM reference input QSPI3_MRST O3 QSPI3 output (aka: MRST3) IOM_MON2_3 IOM monitor input IOM_REF2_3 IOM reference input —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_COUT62 O7 CCU60 output IOM_MON1_5 IOM monitor input IOM_REF1_1 IOM reference input Table 2-19 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-47 V 1.0 2017-09 7 P02.6 I A1 / HighZ / VDDP3 General-purpose input TIM0_6 GTM_TIN QSPI3_MTSRA QSPI3 input (aka: MTSR3A) SENT_SENT2C SENT input CCU60_CC60INC CCU60 input CCU60_CCPOS0A CCU60 input CCU61_T12HRB CCU61 input GPT120_T3INA GPT120 input P02.6 O0 General-purpose output TOM0_14 O1 GTM_TOUT TOM1_14 GTM_TOUT TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) IOM_REF0_6 IOM reference input —O 2 Reserved QSPI3_MTSR O3 QSPI3 output (aka: MTSR3) —O 4 Reserved VADC_EMUX00 O5 VADC output —O 6 Reserved CCU60_CC60 O7 CCU60 output IOM_MON1_2 IOM monitor input IOM_REF1_6 IOM reference input Table 2-19 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-48 V 1.0 2017-09 8 P02.7 I A1 / HighZ / VDDP3 General-purpose input TIM0_7 GTM_TIN QSPI3_SCLKA QSPI3 input (aka: SCLK3A) SENT_SENT1C SENT input CCU60_CC61INC CCU60 input CCU60_CCPOS1A CCU60 input CCU61_T13HRB CCU61 input GPT120_T3EUDA GPT120 input PMU_FDEST PMU input P02.7 O0 General-purpose output TOM0_15 O1 GTM_TOUT TOM1_15 GTM_TOUT TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) IOM_REF0_7 IOM reference input —O 2 Reserved QSPI3_SCLK O3 QSPI3 output (aka: SCLK3) —O 4 Reserved VADC_EMUX01 O5 VADC output SENT_SPC1 O6 SENT output CCU60_CC61 O7 CCU60 output IOM_MON1_1 IOM monitor input IOM_REF1_5 IOM reference input Table 2-19 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-49 V 1.0 2017-09 9 P02.8 I A1 / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN SENT_SENT0C SENT input CCU60_CC62INC CCU60 input CCU60_CCPOS2A CCU60 input CCU61_T12HRC CCU61 input CCU61_T13HRC CCU61 input GPT120_T4INA GPT120 input P02.8 O0 General-purpose output TOM0_8 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) IOM_REF0_8 IOM reference input QSPI3_SLSO5 O2 QSPI3 output (aka: SLSO35) —O 3 Reserved —O 4 Reserved VADC_EMUX02 O5 VADC output —O 6 Reserved CCU60_CC62 O7 CCU60 output IOM_MON1_0 IOM monitor input IOM_REF1_4 IOM reference input Table 2-19 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-50 V 1.0 2017-09 Table 2-20 Port 10 Functions Pin Symbol Ctrl. Buffer Type Function 99 P10.5 I A1 / HighZ / VDDP3 General-purpose input TIM0_2 GTM_TIN SCU_HWCFG4 SCU input P10.5 O0 General-purpose output TOM0_2 O1 GTM_TOUT TOM1_10 GTM_TOUT IOM_REF2_9 IOM reference input —O 2 Reserved QSPI3_SLSO8 O3 QSPI3 output (aka: SLSO38) QSPI1_SLSO9 O4 QSPI1 output (aka: SLSO19) GPT120_T6OUT O5 GPT120 output —O 6 Reserved —O 7 Reserved 100 P10.6 I A1 / HighZ / VDDP3 General-purpose input TIM0_3 GTM_TIN QSPI3_MTSRB QSPI3 input (aka: MTSR3B) SCU_HWCFG5 SCU input P10.6 O0 General-purpose output TOM0_3 O1 GTM_TOUT TOM1_11 GTM_TOUT IOM_REF2_10 IOM reference input —O 2 Reserved QSPI3_MTSR O3 QSPI3 output (aka: MTSR3) GPT120_T3OUT O4 GPT120 output —O 5 Reserved QSPI1_MRST O6 QSPI1 output (aka: MRST1) IOM_MON2_1 IOM monitor input IOM_REF2_1 IOM reference input —O 7 Reserved

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-51 V 1.0 2017-09 Table 2-21 Port 11 Functions Pin Symbol Ctrl. Buffer Type Function 91 P11.2 I A1+ / HighZ / VDDP3 General-purpose input P11.2 O0 General-purpose output TOM0_8 O1 GTM_TOUT TOM1_1 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) —O 2 Reserved QSPI0_SLSO5 O3 QSPI0 output (aka: SLSO05) QSPI1_SLSO5 O4 QSPI1 output (aka: SLSO15) CCU61_COUT63 O5 CCU61 output IOM_MON1_7 IOM monitor input IOM_REF1_7 IOM reference input —O 6 Reserved CCU60_COUT63 O7 CCU60 output IOM_MON1_6 IOM monitor input IOM_REF1_0 IOM reference input 92 P11.3 I A1+ / HighZ / VDDP3 General-purpose input QSPI1_MRSTB QSPI1 input (aka: MRST1B) P11.3 O0 General-purpose output TOM0_10 O1 GTM_TOUT TOM1_2 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) —O 2 Reserved QSPI1_MRST O3 QSPI1 output (aka: MRST1) IOM_MON2_1 IOM monitor input IOM_REF2_1 IOM reference input —O 4 Reserved CCU61_COUT62 O5 CCU61 output IOM_MON1_13 IOM monitor input IOM_REF1_8 IOM reference input —O 6 Reserved CCU60_COUT62 O7 CCU60 output IOM_MON1_5 IOM monitor input IOM_REF1_1 IOM reference input

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-52 V 1.0 2017-09 93 P11.6 I A1+ / HighZ / VDDP3 General-purpose input QSPI1_SCLKB QSPI1 input (aka: SCLK1B) P11.6 O0 General-purpose output TOM0_11 O1 GTM_TOUT TOM1_3 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) —O 2 Reserved QSPI1_SCLK O3 QSPI1 output (aka: SCLK1) —O 4 Reserved CCU61_COUT61 O5 CCU61 output IOM_MON1_12 IOM monitor input IOM_REF1_9 IOM reference input —O 6 Reserved CCU60_COUT61 O7 CCU60 output IOM_MON1_4 IOM monitor input IOM_REF1_2 IOM reference input 95 P11.8 I A1 / HighZ / VDDP3 General-purpose input QSPI1_MTSRC QSPI1 input (aka: MTSR1C) P11.8 O0 General-purpose output TOM0_4 O1 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) —O 2 Reserved QSPI1_SLSO10 O3 QSPI1 output (aka: SLSO110) QSPI1_MTSR O4 QSPI1 output (aka: MTSR1) —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-21 Port 11 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-53 V 1.0 2017-09 94 P11.9 I A1+ / HighZ / VDDP3 General-purpose input QSPI1_MTSRB QSPI1 input (aka: MTSR1B) P11.9 O0 General-purpose output TOM0_12 O1 GTM_TOUT TOM1_4 GTM_TOUT (= DTM5_OUT4) TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) —O 2 Reserved QSPI1_MTSR O3 QSPI1 output (aka: MTSR1) —O 4 Reserved CCU61_COUT60 O5 CCU61 output IOM_MON1_11 IOM monitor input IOM_REF1_10 IOM reference input —O 6 Reserved CCU60_COUT60 O7 CCU60 output IOM_MON1_3 IOM monitor input IOM_REF1_3 IOM reference input 96 P11.10 I A1+ / HighZ / VDDP3 General-purpose input ASCLIN1_RXE ASCLIN1 input (aka: ARX1E) SCU_REQ12 SCU input P11.10 O0 General-purpose output TOM0_13 O1 GTM_TOUT TOM1_5 GTM_TOUT (= DTM5_OUT5) TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) —O 2 Reserved QSPI0_SLSO3 O3 QSPI0 output (aka: SLSO03) QSPI1_SLSO3 O4 QSPI1 output (aka: SLSO13) CCU61_CC62 O5 CCU61 output IOM_MON1_10 IOM monitor input IOM_REF1_11 IOM reference input —O 6 Reserved CCU60_CC62 O7 CCU60 output IOM_MON1_0 IOM monitor input IOM_REF1_4 IOM reference input Table 2-21 Port 11 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-54 V 1.0 2017-09 97 P11.11 I A1+ / HighZ / VDDP3 General-purpose input P11.11 O0 General-purpose output TOM0_14 O1 GTM_TOUT TOM1_6 GTM_TOUT (= DTM5_OUT6) TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) —O 2 Reserved QSPI0_SLSO4 O3 QSPI0 output (aka: SLSO04) QSPI1_SLSO4 O4 QSPI1 output (aka: SLSO14) CCU61_CC61 O5 CCU61 output IOM_MON1_9 IOM monitor input IOM_REF1_12 IOM reference input —O 6 Reserved CCU60_CC61 O7 CCU60 output IOM_MON1_1 IOM monitor input IOM_REF1_5 IOM reference input 98 P11.12 I A1+ / HighZ / VDDP3 General-purpose input P11.12 O0 General-purpose output TOM0_15 O1 GTM_TOUT TOM1_7 GTM_TOUT (= DTM5_OUT7) TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input GTM_CLK2 O3 GTM output —O 4 Reserved CCU61_CC60 O5 CCU61 output IOM_MON1_8 IOM monitor input IOM_REF1_13 IOM reference input SCU_EXTCLK1 O6 SCU output CCU60_CC60 O7 CCU60 output IOM_MON1_2 IOM monitor input IOM_REF1_6 IOM reference input Table 2-21 Port 11 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-55 V 1.0 2017-09 Table 2-22 Port 13 Functions Pin Symbol Ctrl. Buffer Type Function 87 P13.0 I A1 / HighZ / VDDP3 General-purpose input CCU60_CTRAPA CCU60 input GPT120_T6EUDB GPT120 input P13.0 O0 General-purpose output TOM0_5 O1 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) —O 2 Reserved QSPI2_SCLK O3 QSPI2 output (aka: SCLK2) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved 88 P13.1 I A1 / HighZ / VDDP3 General-purpose input CCU60_CCPOS0C CCU60 input GPT120_T3INB GPT120 input P13.1 O0 General-purpose output TOM0_6 O1 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-56 V 1.0 2017-09 89 P13.2 I A1 / HighZ / VDDP3 General-purpose input CCU60_CCPOS1C CCU60 input GPT120_T3EUDB GPT120 input GPT120_CAPINA GPT120 input P13.2 O0 General-purpose output TOM0_7 O1 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved 90 P13.3 I A1 / HighZ / VDDP3 General-purpose input CCU60_CCPOS2C CCU60 input GPT120_T4INB GPT120 input P13.3 O0 General-purpose output TOM0_8 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_4 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) —O 2 Reserved QSPI2_MTSR O3 QSPI2 output (aka: MTSR2) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-22 Port 13 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-57 V 1.0 2017-09 Table 2-23 Port 14 Functions Pin Symbol Ctrl. Buffer Type Function 81 P14.0 I A1+ / HighZ / VDDP3 General-purpose input TIM0_3 GTM_TIN P14.0 O0 General-purpose output TOM0_3 O1 GTM_TOUT TOM1_3 GTM_TOUT TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) ASCLIN0_TX O2 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input —O 3 Reserved —O 4 Reserved CAN1_TXD O5 CAN node 1 output (aka: TXDCAN1) IOM_MON2_6 IOM monitor input IOM_REF2_6 IOM reference input ASCLIN0_SCLK O6 ASCLIN0 output (aka: ASCLK0) CCU60_COUT62 O7 CCU60 output IOM_MON1_5 IOM monitor input IOM_REF1_1 IOM reference input

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-58 V 1.0 2017-09 82 P14.1 I A1+ / HighZ / VDDP3 General-purpose input TIM0_4 GTM_TIN ASCLIN0_RXA ASCLIN0 input (aka: ARX0A) CAN1_RXDB CAN node 1 input (aka: RXDCAN1B) SCU_REQ15 SCU input SCU_EVRWUPA AI SCU input P14.1 O0 General-purpose output TOM0_4 O1 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) IOM_REF1_14 IOM reference input ASCLIN0_TX O2 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_COUT63 O7 CCU60 output IOM_MON1_6 IOM monitor input IOM_REF1_0 IOM reference input 83 P14.3 I A1 / PU / VDDP3 General-purpose input TIM0_6 GTM_TIN SCU_REQ10 SCU input SCU_HWCFG3_BMI SCU input P14.3 O0 General-purpose output TOM0_6 O1 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) IOM_REF2_4 IOM reference input —O 2 Reserved QSPI2_SLSO3 O3 QSPI2 output (aka: SLSO23) ASCLIN1_SLSO O4 ASCLIN1 output (aka: ASLSO1) —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-23 Port 14 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-59 V 1.0 2017-09 84 P14.4 I A1+ / HighZ / VDDP3 General-purpose input TIM0_7 GTM_TIN P14.4 O0 General-purpose output TOM0_7 O1 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) IOM_REF2_8 IOM reference input —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved 85 P14.6 I A1+ / PU / VDDP3 General-purpose input TIM0_1 GTM_TIN QSPI0_MRSTD QSPI0 input (aka: MRST0D) P14.6 O0 General-purpose output TOM0_1 O1 GTM_TOUT TOM1_1 GTM_TOUT IOM_REF2_14 IOM reference input —O 2 Reserved QSPI2_SLSO2 O3 QSPI2 output (aka: SLSO22) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-23 Port 14 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-60 V 1.0 2017-09 Table 2-24 Port 15 Functions Pin Symbol Ctrl. Buffer Type Function 76 P15.0 I A1 / HighZ / VDDP3 General-purpose input P15.0 O0 General-purpose output TOM1_3 O1 GTM_TOUT TOM0_11 GTM_TOUT TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input QSPI0_SLSO13 O3 QSPI0 output (aka: SLSO013) —O 4 Reserved CAN2_TXD O5 CAN node 2 output (aka: TXDCAN2) IOM_MON2_7 IOM monitor input IOM_REF2_7 IOM reference input ASCLIN1_SCLK O6 ASCLIN1 output (aka: ASCLK1) —O 7 Reserved 77 P15.1 I A1 / HighZ / VDDP3 General-purpose input ASCLIN1_RXA ASCLIN1 input (aka: ARX1A) QSPI2_SLSIB QSPI2 input (aka: SLSI2B) CAN2_RXDA CAN node 2 input (aka: RXDCAN2A) SCU_REQ16 SCU input SCU_EVRWUPB AI SCU input P15.1 O0 General-purpose output TOM1_4 O1 GTM_TOUT (= DTM5_OUT4) TOM0_12 GTM_TOUT TOM0_4 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input QSPI2_SLSO5 O3 QSPI2 output (aka: SLSO25) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-61 V 1.0 2017-09 78 P15.2 I A1 / HighZ / VDDP3 General-purpose input QSPI2_MRSTE QSPI2 input (aka: MRST2E) QSPI2_SLSIA QSPI2 input (aka: SLSI2A) QSPI2_HSICINA QSPI2 input (aka: HSIC2INA) P15.2 O0 General-purpose output TOM1_5 O1 GTM_TOUT (= DTM5_OUT5) TOM0_13 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) ASCLIN0_TX O2 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input QSPI2_SLSO0 O3 QSPI2 output (aka: SLSO20) —O 4 Reserved CAN1_TXD O5 CAN node 1 output (aka: TXDCAN1) IOM_MON2_6 IOM monitor input IOM_REF2_6 IOM reference input ASCLIN0_SCLK O6 ASCLIN0 output (aka: ASCLK0) —O 7 Reserved 79 P15.3 I A1 / HighZ / VDDP3 General-purpose input ASCLIN0_RXB ASCLIN0 input (aka: ARX0B) QSPI2_SCLKA QSPI2 input (aka: SCLK2A) QSPI2_HSICINB QSPI2 input (aka: HSIC2INB) CAN1_RXDA CAN node 1 input (aka: RXDCAN1A) P15.3 O0 General-purpose output TOM1_6 O1 GTM_TOUT (= DTM5_OUT6) TOM0_14 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) ASCLIN0_TX O2 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input QSPI2_SCLK O3 QSPI2 output (aka: SCLK2) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-24 Port 15 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-62 V 1.0 2017-09 80 P15.5 I A1 / HighZ / VDDP3 General-purpose input ASCLIN1_RXB ASCLIN1 input (aka: ARX1B) QSPI2_MTSRA QSPI2 input (aka: MTSR2A) SCU_REQ13 SCU input P15.5 O0 General-purpose output TOM0_0 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input QSPI2_MTSR O3 QSPI2 output (aka: MTSR2) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_CC61 O7 CCU60 output IOM_MON1_1 IOM monitor input IOM_REF1_5 IOM reference input Table 2-25 Port 20 Functions Pin Symbol Ctrl. Buffer Type Function 64 P20.2 I Input Only / PU / VDDP3 General-purpose input TESTMODE Factory Test Mode Enable Table 2-24 Port 15 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-63 V 1.0 2017-09 69 P20.8 I A1 / HighZ / VDDP3 General-purpose input TIM0_7 GTM_TIN P20.8 O0 General-purpose output TOM1_7 O1 GTM_TOUT (= DTM5_OUT7) TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM0_4 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) IOM_MON2_8 IOM monitor input ASCLIN1_SLSO O2 ASCLIN1 output (aka: ASLSO1) QSPI0_SLSO0 O3 QSPI0 output (aka: SLSO00) QSPI1_SLSO0 O4 QSPI1 output (aka: SLSO10) CAN0_TXD O5 CAN node 0 output (aka: TXDCAN0) IOM_MON2_5 IOM monitor input IOM_REF2_5 IOM reference input SCU_WDT0LCK O6 SCU output CCU61_CC60 O7 CCU61 output IOM_MON1_8 IOM monitor input IOM_REF1_13 IOM reference input 70 P20.9 I A1 / HighZ / VDDP3 General-purpose input ASCLIN1_RXC ASCLIN1 input (aka: ARX1C) QSPI0_SLSIB QSPI0 input (aka: SLSI0B) SCU_REQ11 SCU input P20.9 O0 General-purpose output TOM1_13 O1 GTM_TOUT TOM0_13 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) IOM_MON2_11 IOM monitor input —O 2 Reserved QSPI0_SLSO1 O3 QSPI0 output (aka: SLSO01) QSPI1_SLSO1 O4 QSPI1 output (aka: SLSO11) —O 5 Reserved SCU_WDTSLCK O6 SCU output CCU61_CC61 O7 CCU61 output IOM_MON1_9 IOM monitor input IOM_REF1_12 IOM reference input Table 2-25 Port 20 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-64 V 1.0 2017-09 71 P20.10 I A1 / HighZ / VDDP3 General-purpose input P20.10 O0 General-purpose output TOM1_14 O1 GTM_TOUT TOM0_14 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) IOM_MON2_14 IOM monitor input ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input QSPI0_SLSO6 O3 QSPI0 output (aka: SLSO06) QSPI2_SLSO7 O4 QSPI2 output (aka: SLSO27) —O 5 Reserved ASCLIN1_SCLK O6 ASCLIN1 output (aka: ASCLK1) CCU61_CC62 O7 CCU61 output IOM_MON1_10 IOM monitor input IOM_REF1_11 IOM reference input 72 P20.11 I A1+ / HighZ / VDDP3 General-purpose input QSPI0_SCLKA QSPI0 input (aka: SCLK0A) P20.11 O0 General-purpose output TOM1_15 O1 GTM_TOUT TOM0_15 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) IOM_MON2_15 IOM monitor input —O 2 Reserved QSPI0_SCLK O3 QSPI0 output (aka: SCLK0) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU61_COUT60 O7 CCU61 output IOM_MON1_11 IOM monitor input IOM_REF1_10 IOM reference input Table 2-25 Port 20 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-65 V 1.0 2017-09 73 P20.12 I A1 / HighZ / VDDP3 General-purpose input QSPI0_MRSTA QSPI0 input (aka: MRST0A) IOM_PIN13 IOM pad input P20.12 O0 General-purpose output TOM1_0 O1 GTM_TOUT TOM0_8 GTM_TOUT TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) IOM_MON0_13 IOM monitor input —O 2 Reserved QSPI0_MRST O3 QSPI0 output (aka: MRST0) IOM_MON2_0 IOM monitor input IOM_REF2_0 IOM reference input QSPI0_MTSR O4 QSPI0 output (aka: MTSR0) —O 5 Reserved —O 6 Reserved CCU61_COUT61 O7 CCU61 output IOM_MON1_12 IOM monitor input IOM_REF1_9 IOM reference input 74 P20.13 I A1+ / HighZ / VDDP3 General-purpose input QSPI0_SLSIA QSPI0 input (aka: SLSI0A) IOM_PIN14 IOM pad input P20.13 O0 General-purpose output TOM1_1 O1 GTM_TOUT TOM0_9 GTM_TOUT TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) IOM_MON0_14 IOM monitor input —O 2 Reserved QSPI0_SLSO2 O3 QSPI0 output (aka: SLSO02) QSPI1_SLSO2 O4 QSPI1 output (aka: SLSO12) QSPI0_SCLK O5 QSPI0 output (aka: SCLK0) —O 6 Reserved CCU61_COUT62 O7 CCU61 output IOM_MON1_13 IOM monitor input IOM_REF1_8 IOM reference input Table 2-25 Port 20 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-66 V 1.0 2017-09 75 P20.14 I A1+ / HighZ / VDDP3 General-purpose input QSPI0_MTSRA QSPI0 input (aka: MTSR0A) IOM_PIN15 IOM pad input P20.14 O0 General-purpose output TOM1_2 O1 GTM_TOUT TOM0_10 GTM_TOUT TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) IOM_MON0_15 IOM monitor input —O 2 Reserved QSPI0_MTSR O3 QSPI0 output (aka: MTSR0) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-26 Port 21 Functions Pin Symbol Ctrl. Buffer Type Function 56 P21.2 I A1 / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN SCU_EMGSTOPB SCU input P21.2 O0 General-purpose output TOM0_0 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_4 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-25 Port 20 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-67 V 1.0 2017-09 57 P21.3 I A1 / HighZ / VDDP3 General-purpose input TIM0_1 GTM_TIN P21.3 O0 General-purpose output TOM0_1 O1 GTM_TOUT TOM1_1 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved 58 P21.4 I A1 / HighZ / VDDP3 General-purpose input TIM0_2 GTM_TIN P21.4 O0 General-purpose output TOM0_2 O1 GTM_TOUT TOM1_2 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-26 Port 21 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-68 V 1.0 2017-09 59 P21.6 I A1 / PU / VDDP3 General-purpose input TIM0_4 GTM_TIN TDI OCDS input OCDS_TGI2 OCDS input GPT120_T5EUDA GPT120 input P21.6 O0 General-purpose output TOM0_4 O1 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved GPT120_T3OUT O7 GPT120 output OCDS_TGO2 O OCDS 61 P21.7 I A1+ / PU / VDDP3 General-purpose input TIM0_5 GTM_TIN OCDS_DAP2 OCDS input OCDS_TGI3 OCDS input GPT120_T5INA GPT120 input P21.7 O0 General-purpose output TOM0_5 O1 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved GPT120_T6OUT O7 GPT120 output OCDS_TGO3 O OCDS OCDS_DAP2 O OCDS Output TDO O JTAG Output Table 2-26 Port 21 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-69 V 1.0 2017-09 Table 2-27 Port 23 Functions Pin Symbol Ctrl. Buffer Type Function 51 P23.1 I A1+ / HighZ / VDDP3 General-purpose input TIM0_6 GTM_TIN P23.1 O0 General-purpose output TOM0_6 O1 GTM_TOUT (= DTM1_OUT6) TOM0_15 GTM_TOUT ASCLIN1_RTS O2 ASCLIN1 output (aka: ARTS1) QSPI3_SLSO13 O3 QSPI3 output (aka: SLSO313) GTM_CLK0 O4 GTM output SCU_EXTCLK1 O5 SCU output SCU_EXTCLK0 O6 SCU output —O 7 Reserved Table 2-28 Port 33 Functions Pin Symbol Ctrl. Buffer Type Function 41 P33.5 I A1 / HighZ / VDDP3 General-purpose input TIM0_1 GTM_TIN CCU61_CCPOS2C CCU61 input GPT120_T4EUDB GPT120 input IOM_PIN5 IOM pad input P33.5 O0 General-purpose output TOM0_1 O1 GTM_TOUT TOM1_1 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) IOM_MON0_5 IOM monitor input QSPI0_SLSO7 O2 QSPI0 output (aka: SLSO07) QSPI1_SLSO7 O3 QSPI1 output (aka: SLSO17) —O 4 Reserved VADC_EMUX11 O5 VADC output VADC_G0BFL1 O6 VADC output CCU61_CC60 O7 CCU61 output IOM_MON1_8 IOM monitor input IOM_REF1_13 IOM reference input

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-70 V 1.0 2017-09 42 P33.6 I A1 / HighZ / VDDP3 General-purpose input TIM0_2 GTM_TIN ASCLIN1_RXF ASCLIN1 input (aka: ARX1F) CCU61_CCPOS1C CCU61 input GPT120_T2EUDB GPT120 input IOM_PIN6 IOM pad input P33.6 O0 General-purpose output TOM0_2 O1 GTM_TOUT TOM1_2 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) IOM_MON0_6 IOM monitor input —O 2 Reserved —O 3 Reserved ASCLIN1_TX O4 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input VADC_EMUX10 O5 VADC output VADC_G0BFL2 O6 VADC output CCU61_CC61 O7 CCU61 output IOM_MON1_9 IOM monitor input IOM_REF1_12 IOM reference input Table 2-28 Port 33 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-71 V 1.0 2017-09 43 P33.7 I A1+ / HighZ / VDDP3 General-purpose input TIM0_3 GTM_TIN CAN0_RXDE CAN node 0 input (aka: RXDCAN0E) SCU_REQ8 SCU input CCU61_CCPOS0C CCU61 input GPT120_T2INB GPT120 input IOM_PIN7 IOM pad input P33.7 O0 General-purpose output TOM0_3 O1 GTM_TOUT TOM1_3 GTM_TOUT TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) IOM_MON0_7 IOM monitor input —O 2 Reserved QSPI3_SLSO7 O3 QSPI3 output (aka: SLSO37) —O 4 Reserved —O 5 Reserved VADC_G0BFL3 O6 VADC output CCU61_COUT60 O7 CCU61 output IOM_MON1_11 IOM monitor input IOM_REF1_10 IOM reference input Table 2-28 Port 33 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-72 V 1.0 2017-09 44 P33.8 I A1+ / HighZ / VDDP3 General-purpose input TIM0_4 GTM_TIN SCU_EMGSTOPA SCU input IOM_PIN8 IOM pad input P33.8 O0 General-purpose output TOM0_4 O1 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) IOM_MON0_8 IOM monitor input —O 2 Reserved QSPI3_SLSO2 O3 QSPI3 output (aka: SLSO32) —O 4 Reserved CAN0_TXD O5 CAN node 0 output (aka: TXDCAN0) IOM_MON2_5 IOM monitor input IOM_REF2_5 IOM reference input —O 6 Reserved CCU61_COUT62 O7 CCU61 output IOM_MON1_13 IOM monitor input IOM_REF1_8 IOM reference input SMU_FSP O SMU Table 2-28 Port 33 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-73 V 1.0 2017-09 45 P33.9 I A1 / HighZ / VDDP3 General-purpose input TIM0_1 GTM_TIN QSPI3_HSICINA QSPI3 input (aka: HSIC3INA) IOM_PIN9 IOM pad input P33.9 O0 General-purpose output TOM0_1 O1 GTM_TOUT TOM1_1 GTM_TOUT TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) IOM_MON0_9 IOM monitor input —O 2 Reserved QSPI3_SLSO1 O3 QSPI3 output (aka: SLSO31) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU61_CC62 O7 CCU61 output IOM_MON1_10 IOM monitor input IOM_REF1_11 IOM reference input 46 P33.10 I A1+ / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN QSPI3_SLSIC QSPI3 input (aka: SLSI3C) QSPI3_HSICINB QSPI3 input (aka: HSIC3INB) IOM_PIN10 IOM pad input P33.10 O0 General-purpose output TOM0_0 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) IOM_MON0_10 IOM monitor input QSPI1_SLSO6 O2 QSPI1 output (aka: SLSO16) QSPI3_SLSO11 O3 QSPI3 output (aka: SLSO311) ASCLIN1_SLSO O4 ASCLIN1 output (aka: ASLSO1) GTM_CLK1 O5 GTM output SCU_EXTCLK1 O6 SCU output CCU61_COUT61 O7 CCU61 output IOM_MON1_12 IOM monitor input IOM_REF1_9 IOM reference input Table 2-28 Port 33 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-74 V 1.0 2017-09 Table 2-29 Port 40 Functions Pin Symbol Ctrl. Buffer Type Function 40 P40.0 I S / VDDM General-purpose input VADCG0_0 AI VADC input channel 0 of group 0 39 P40.1 I S / VDDM General-purpose input VADCG0_1 AI VADC input channel 1 of group 0 (with multiplexer diagnostics) 38 P40.2 I S / VDDM General-purpose input VADCG0_2 AI VADC input channel 2 of group 0 (with multiplexer diagnostics) 37 P40.3 I S / VDDM General-purpose input VADCG0_3 AI VADC input channel 3 of group 0 36 P40.4 I S / VDDM General-purpose input VADCG0_4 AI VADC input channel 4 of group 0 35 P40.5 I S / VDDM General-purpose input VADCG0_5 AI VADC input channel 5 of group 0 34 P40.6 I S / VDDM General-purpose input VADCG0_6 AI VADC input channel 6 of group 0 29 P40.7 I S / VDDM General-purpose input VADCG0_7 AI VADC input channel 7 of group 0 (with pull down diagnostics) 28 P40.8 I S / VDDM General-purpose input VADCG0_8 AI VADC input channel 8 of group 0 27 P40.9 I S / VDDM General-purpose input VADCG0_9 AI VADC input channel 9 of group 0 (with multiplexer diagnostics) 26 P40.10 I S / VDDM General-purpose input VADCG0_10 AI VADC input channel 10 of group 0 (with multiplexer diagnostics) 25 P40.11 I S / VDDM General-purpose input SENT_SENT0A SENT input CCU60_CCPOS0D CCU60 input VADCG0_11 AI VADC input channel 11 of group 0

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-75 V 1.0 2017-09 Table 2-30 Port 41 Functions Pin Symbol Ctrl. Buffer Type Function 24 P41.0 I S / VDDM General-purpose input SENT_SENT1A SENT input CCU60_CCPOS1B CCU60 input VADCG1_0 AI VADC input channel 0 of group 1 23 P41.1 I S / VDDM General-purpose input VADCG1_1 AI VADC input channel 1 of group 1 (with multiplexer diagnostics) 22 P41.2 I S / VDDM General-purpose input SENT_SENT2A SENT input CCU61_CCPOS1B CCU61 input VADCG1_2 AI VADC input channel 2 of group 1 (with multiplexer diagnostics) 21 P41.3 I S / VDDM General-purpose input SENT_SENT3A SENT input CCU61_CCPOS1D CCU61 input VADCG1_3 AI VADC input channel 3 of group 1 (with pull down diagnostics) 20 P41.4 I S / VDDM General-purpose input VADCG1_4 AI VADC input channel 4 of group 1 19 P41.5 I S / VDDM General-purpose input VADCG1_5 AI VADC input channel 5 of group 1 18 P41.6 I S / VDDM General-purpose input VADCG1_6 AI VADC input channel 6 of group 1 17 P41.7 I S / VDDM General-purpose input VADCG1_7 AI VADC input channel 7 of group 1 16 P41.8 I S / VDDM General-purpose input VADCG1_8 AI VADC input channel 8 of group 1 15 P41.9 I S / VDDM General-purpose input VADCG1_9 AI VADC input channel 9 of group 1 (with multiplexer diagnostics) 14 P41.10 I S / VDDM General-purpose input VADCG1_10 AI VADC input channel 10 of group 1 (with multiplexer diagnostics) 13 P41.11 I S / VDDM General-purpose input VADCG1_11 AI VADC input channel 11 of group 1

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin Data Sheet 2-76 V 1.0 2017-09 Table 2-31 System I/O Pin Symbol Ctrl. Buffer Type Function

53 XTAL1 I VDDP3 Main Oscillator/PLL/Clock Generator Input

54 XTAL2 O VDDP3 Main Oscillator/PLL/Clock Generator Output

60 TMS/DAP1 I A1+ / PD /

DAP1 I/O Device Access Port LIne 1

62 TRST I Input Only

/ PD / VDDP3 JTAG Module Reset/Enable Input

63 TCK/DAP0 I Input Only

/ PD / VDDP3 OCDS input DAP0 I Device Access Port LIne 0

65 ESR1 I/O A1+ / PU /

66 PORST I Input Only

/ PD / VDDP3 Power On Reset Additional strong PD in case of power fail. Pin Symbol Ctrl. Buffer Type Function

30 V AGND I— Negative Analog Reference Voltage 0

31 V AREF I— Positive Analog Reference Voltage 0

86 V DDP3 I— Digital I/O Power Supply (3.3V) This pin supplies also the Flash 3.3V. 47 V DDP3 I— Digital I/O Power Supply (3.3V) 52 V DD I— Digital Core Power Supply (1.3V) This pin supplies also the main XTAL Oscillator/PLL (1.3V). A higher decoupling capacitor is therefore recommended to the VSS pin for better noise immunity. 55 V DDP3 I— Digital I/O Power Supply (3.3V) This pin supplies also the main XTAL Oscillator/PLL (3.3V). A higher decoupling capacitor is therefore recommended to the VSS pin for better noise immunity. 33 V DDM I— ADC Power Supply (5.0V) 12 V DDP3 I— Digital I/O Power Supply (3.3V) 11 V DD I— Digital Core Power Supply (1.3V) 68 V DD I— Digital Core Power Supply (1.3V)

32 V SSM I— Analog Ground for VDDM

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-77 V 1.0 2017-09

2.2.2 Pull-Up/Pull-Down R eset Behavior of the Pins

2.3 PG-TQFP-144-27 Packag e Variant Pin Configuration of TC214 / TC224

Figure 2-1 is showing the TC214 / TC224 pinout for the package variant: PG-TQFP-144-27. Table 2-33 List of Pull-Up/Pull-Down Reset Behavior of the Pins Pins PORST = 0 PORST = 1 all GPIOs High-Z TDI, TESTMODE Pull-up PORST1) 1) Pull-down with IPORST relevant is always activated when a primary supply monitor detects a violation. Pull-down with IPORST relevant Pull-down with IPDLI relevant TRST, TCK, TMS Pull-down ESR0 The open-drain driver is used to drive low.2) 2) Valid additionally after deactivation of PORST until the inter nal reset phase has finished. See the SCU chapter for details. Pull-up3) 3) See the SCU_IOCR register description. ESR1 Pull-up3) P14.2, P14.3, P14.6 Pull-up P21.7 / TDO Pull-up High-Z/Pull-up 4) 4) Depends on JTAG/DAP selection with TRST .

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-78 V 1.0 2017-09 Figure 2-3 TC214 / TC224 Pinout for the package variant PG-TQFP-144-27. 110 P15.1 111 P15.2 112 P15.3 113 P15.4 114 P15.5 115 P15.6 116 P15.7 117 P15.8 118 P14.0/B ootloader 119 P14.1/B ootloader 120 P14.2 121 P14.3 122 P14.4 123 P14.5 124 P14.6 125 P14.7 127 P14.8 128 P13.0 129 P13.1 130 P13.2 131 P13.3 132 P11.2 133 P11.3 134 P11.6 135 P11.9 136 P11.8 137 P11.10 138 P11.11 139 P11.12 140 P10.1 141 P10.2 142 P10.3 143 P10.5 144 P10.6 1P02.0 2P02.1 3P02.2 4P02.3 5P02.4 6P02.5 7P02.6 8P02.7 9P02.8 11P00.0 12P00.1 13P00.2 14P00.3 15P00.4 16P00.5 17P00.6 18P00.7 19P00.8 20P00.9 21P00.12 52P 34.0 53P 34.1 54P 34.2 55P 34.3 56P 33.0 57P 33.1 58P 33.2 59P 33.3 60P 33.4 61P 33.5 62P 33.6 63P 33.7 64P 33.8 65P 33.9 66P 33.10 67P 33.11 68P 33.12 73 P23.1 74 P22.0 75 P22.1 76 P22.2 77 P22.3 78 P22.4 84 P21.2 85 P21.3 86 P21.4 87 P21.5 88 P21.6/TDI 90 P21.7/TDO/DAP2 93 P20.0 94 P20.2/TESTMODE 95 P20.3 100 P20.6 101 P20.7 102 P20.8 103 P20.9 104 P20.10 105 P20.11 106 P20.12 107 P20.13 108 P20.14 109 P15.0

126 V DDP 3

79 V DD

83 V DDP3

99 V DD

80 V SS

70N.C. 71N.C. 72N.C. 41VAGND 42VAREF

81 XTAL1

82 XTAL2

89 TMS/DAP1

91 TRST

92 TCK/ DAP0

96 ESR1

97 PORST

98 ESR0

24AN23/P41.11 25AN22/P41.10 26AN21/P41.9 27AN20/P41.8 28AN19/P41.7 29AN18/P41.6 30AN17/P41.5 31AN16/P41.4 32AN15/P41.3 33AN14/P41.2 34AN13/P41.1 35AN12/P41.0 36AN11/P40.11 37AN10/P 40.10 38AN9/P 40.9 39AN8/P 40.8 40AN7/P 40.7 45AN6/P 40.6 46AN5/P 40.5 47AN4/P 40.4 48AN3/P 40.3 49AN2/P 40.2 50AN1/P 40.1 51AN0/P 40.0 TC22x (Top View)

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-79 V 1.0 2017-09

2.3.1 Port Functions and Pinning Tables

2.3.1.1 How to Read the Fol lowing Port Function Tables

Some hints for interpreting the following tables. Column “Ctrl.”: I = Input (for GPIO port Lines with IOCR bit field Selection PCx = 0XXXB) AI = Analog input O = Output O0 = Output with IOCR bit field selection PCx = 1X000B O1 = Output with IOCR bit field selection PCx = 1X001B (ALT1) O2 = Output with IOCR bit field selection PCx = 1X010B (ALT2) O3 = Output with IOCR bit field selection PCx = 1X011B (ALT3) O4 = Output with IOCR bit field selection PCx = 1X100B (ALT4) O5 = Output with IOCR bit field selection PCx = 1X101B (ALT5) O6 = Output with IOCR bit field selection PCx = 1X110B (ALT6) O7 = Output with IOCR bit field selection PCx = 1X111B (ALT7) To each input several functions can be connected. The peripherals’ configuration defines if this input is used. The port module (see corresponding chapter) decides which of the 8 output signals O0 to O7 drives the pad. Some Ox rows list more than one function, e.g. several GTM_TOUT outputs and IOM reference inputs. The GTM module (see corresponding chapter) has its own sub-multiplexer structure that defines which of the GTM sub-units drives this signal. Additionally the IOM modules “listens” on these output signals (see IOM chapter). Some pin symbol names were changed in this AURIX device compared to other AURIX devices to improve naming systematics. The previously used symbol name is documented in the “Function” column with the text “(aka …)”1). Column “Type”: IN = Input only A1 = Pad class A1 (3.3V) A1+ = Pad class A1+ (3.3V) S = ADC with digital input. Pad class D for analog input “AI”, pad class S for digital input “I”. PU = with pull-up device connected during reset (PORST = 0) PD = with pull-down device connected during reset (PORST = 0) Table 2-34 Example Port Table Pin Symbol Ctrl. Buffer Type Function 10 Pxx.y I A1 / HighZ / VDDP3 General-purpose input TIMm_n GTM_TIN TOMa_b O1 GTM_TOUT TOMc_d GTM_TOUT IOM_REFv_w IOM reference input ASCLINz_RTS O2 ASCLIN0 output (aka ARTSz) 1) “aka” as abbreviation for “also known as”.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-80 V 1.0 2017-09 High-Z = High-Z during reset (PORST = 0) Vx = Supply (the Exposed Pad is also considered as VSS and shall be connected to ground)

2.3.1.2 Tables

Port function and pinning tables. Table 2-35 Port 00 Functions Pin Symbol Ctrl. Buffer Type Function 11 P00.0 I A1 / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN CCU61_CTRAPA CCU61 input CCU60_T12HRE CCU60 input P00.0 O0 General-purpose output TOM0_8 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_4 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) IOM_REF0_9 IOM reference input ASCLIN0_SCLK O2 ASCLIN0 output (aka: ASCLK0) ASCLIN0_TX O3 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input —O 4 Reserved CAN1_TXD O5 CAN node 1 output (aka: TXDCAN1) IOM_MON2_6 IOM monitor input IOM_REF2_6 IOM reference input —O 6 Reserved CCU60_COUT63 O7 CCU60 output IOM_MON1_6 IOM monitor input IOM_REF1_0 IOM reference input

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-81 V 1.0 2017-09 12 P00.1 I A1 / HighZ / VDDP3 General-purpose input TIM0_1 GTM_TIN ASCLIN0_RXC ASCLIN0 input (aka: ARX0C) CAN1_RXDD CAN node 1 input (aka: RXDCAN1D) SENT_SENT0B SENT input CCU60_CC60INB CCU60 input CCU61_CC60INA CCU61 input P00.1 O0 General-purpose output TOM0_9 O1 GTM_TOUT TOM1_1 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) IOM_REF0_10 IOM reference input ASCLIN0_TX O2 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input —O 3 Reserved —O 4 Reserved —O 5 Reserved SENT_SPC0 O6 SENT output CCU61_CC60 O7 CCU61 output IOM_MON1_8 IOM monitor input IOM_REF1_13 IOM reference input Table 2-35 Port 00 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-82 V 1.0 2017-09 13 P00.2 I A1 / HighZ / VDDP3 General-purpose input TIM0_1 GTM_TIN SENT_SENT1B SENT input P00.2 O0 General-purpose output TOM0_9 O1 GTM_TOUT TOM1_1 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) IOM_REF0_11 IOM reference input ASCLIN0_SCLK O2 ASCLIN0 output (aka: ASCLK0) —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU61_COUT60 O7 CCU61 output IOM_MON1_11 IOM monitor input IOM_REF1_10 IOM reference input 14 P00.3 I A1 / HighZ / VDDP3 General-purpose input SENT_SENT2B SENT input CCU60_CC61INB CCU60 input CCU61_CC61INA CCU61 input P00.3 O0 General-purpose output TOM0_10 O1 GTM_TOUT TOM1_2 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) IOM_REF0_12 IOM reference input —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved SENT_SPC2 O6 SENT output CCU61_CC61 O7 CCU61 output IOM_MON1_9 IOM monitor input IOM_REF1_12 IOM reference input Table 2-35 Port 00 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-83 V 1.0 2017-09 15 P00.4 I A1 / HighZ / VDDP3 General-purpose input SCU_REQ7 SCU input SENT_SENT3B SENT input P00.4 O0 General-purpose output TOM0_11 O1 GTM_TOUT TOM1_3 GTM_TOUT TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) IOM_REF0_13 IOM reference input —O 2 Reserved —O 3 Reserved —O 4 Reserved VADC_G1BFL0 O5 VADC output SENT_SPC3 O6 SENT output CCU61_COUT61 O7 CCU61 output IOM_MON1_12 IOM monitor input IOM_REF1_9 IOM reference input 16 P00.5 I A1 / HighZ / VDDP3 General-purpose input CCU60_CC62INB CCU60 input CCU61_CC62INA CCU61 input P00.5 O0 General-purpose output TOM0_12 O1 GTM_TOUT TOM1_4 GTM_TOUT (= DTM5_OUT4) TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) IOM_REF0_14 IOM reference input —O 2 Reserved —O 3 Reserved —O 4 Reserved VADC_G1BFL1 O5 VADC output —O 6 Reserved CCU61_CC62 O7 CCU61 output IOM_MON1_10 IOM monitor input IOM_REF1_11 IOM reference input Table 2-35 Port 00 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-84 V 1.0 2017-09 17 P00.6 I A1 / HighZ / VDDP3 General-purpose input P00.6 O0 General-purpose output TOM0_13 O1 GTM_TOUT TOM1_5 GTM_TOUT (= DTM5_OUT5) TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) IOM_REF0_15 IOM reference input —O 2 Reserved VADC_G1BFL2 O3 VADC output —O 4 Reserved VADC_EMUX10 O5 VADC output —O 6 Reserved CCU61_COUT62 O7 CCU61 output IOM_MON1_13 IOM monitor input IOM_REF1_8 IOM reference input 18 P00.7 I A1 / HighZ / VDDP3 General-purpose input CCU61_CC60INC CCU61 input CCU61_CCPOS0A CCU61 input CCU60_T12HRB CCU60 input GPT120_T2INA GPT120 input P00.7 O0 General-purpose output TOM0_14 O1 GTM_TOUT TOM1_6 GTM_TOUT (= DTM5_OUT6) TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) —O 2 Reserved VADC_G1BFL3 O3 VADC output —O 4 Reserved VADC_EMUX11 O5 VADC output —O 6 Reserved CCU61_CC60 O7 CCU61 output IOM_MON1_8 IOM monitor input IOM_REF1_13 IOM reference input Table 2-35 Port 00 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-85 V 1.0 2017-09 19 P00.8 I A1 / HighZ / VDDP3 General-purpose input CCU61_CC61INC CCU61 input CCU61_CCPOS1A CCU61 input CCU60_T13HRB CCU60 input GPT120_T2EUDA GPT120 input P00.8 O0 General-purpose output TOM0_15 O1 GTM_TOUT TOM1_7 GTM_TOUT (= DTM5_OUT7) QSPI3_SLSO6 O2 QSPI3 output (aka: SLSO36) —O 3 Reserved —O 4 Reserved VADC_EMUX12 O5 VADC output —O 6 Reserved CCU61_CC61 O7 CCU61 output IOM_MON1_9 IOM monitor input IOM_REF1_12 IOM reference input 20 P00.9 I A1 / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN CCU61_CC62INC CCU61 input CCU61_CCPOS2A CCU61 input CCU60_T13HRC CCU60 input CCU60_T12HRC CCU60 input GPT120_T4EUDA GPT120 input P00.9 O0 General-purpose output TOM0_0 O1 GTM_TOUT TOM1_0 GTM_TOUT QSPI3_SLSO7 O2 QSPI3 output (aka: SLSO37) ASCLIN0_RTS O3 ASCLIN0 output (aka: ARTS0) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU61_CC62 O7 CCU61 output IOM_MON1_10 IOM monitor input IOM_REF1_11 IOM reference input Table 2-35 Port 00 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-86 V 1.0 2017-09 21 P00.12 I A1 / HighZ / VDDP3 General-purpose input TIM0_3 GTM_TIN ASCLIN0_CTSA ASCLIN0 input (aka: ACTS0A) P00.12 O0 General-purpose output TOM0_3 O1 GTM_TOUT TOM1_3 GTM_TOUT —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU61_COUT63 O7 CCU61 output IOM_MON1_7 IOM monitor input IOM_REF1_7 IOM reference input Table 2-35 Port 00 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-87 V 1.0 2017-09 Table 2-36 Port 02 Functions Pin Symbol Ctrl. Buffer Type Function 1 P02.0 I A1+ / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN SCU_REQ6 SCU input CCU60_CC60INA CCU60 input CCU61_CC60INB CCU61 input P02.0 O0 General-purpose output TOM0_8 O1 GTM_TOUT TOM1_8 GTM_TOUT TOM0_4 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) IOM_REF0_0 IOM reference input —O 2 Reserved QSPI3_SLSO1 O3 QSPI3 output (aka: SLSO31) —O 4 Reserved CAN0_TXD O5 CAN node 0 output (aka: TXDCAN0) IOM_MON2_5 IOM monitor input IOM_REF2_5 IOM reference input —O 6 Reserved CCU60_CC60 O7 CCU60 output IOM_MON1_2 IOM monitor input IOM_REF1_6 IOM reference input

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-88 V 1.0 2017-09 2 P02.1 I A1 / HighZ / VDDP3 General-purpose input TIM0_1 GTM_TIN CAN0_RXDA CAN node 0 input (aka: RXDCAN0A) SCU_REQ14 SCU input P02.1 O0 General-purpose output TOM0_9 O1 GTM_TOUT TOM1_9 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) IOM_REF0_1 IOM reference input —O 2 Reserved QSPI3_SLSO2 O3 QSPI3 output (aka: SLSO32) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_COUT60 O7 CCU60 output IOM_MON1_3 IOM monitor input IOM_REF1_3 IOM reference input Table 2-36 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-89 V 1.0 2017-09 3 P02.2 I A1+ / HighZ / VDDP3 General-purpose input TIM0_2 GTM_TIN CCU60_CC61INA CCU60 input CCU61_CC61INB CCU61 input P02.2 O0 General-purpose output TOM0_10 O1 GTM_TOUT TOM1_10 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) IOM_REF0_2 IOM reference input ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input QSPI3_SLSO3 O3 QSPI3 output (aka: SLSO33) —O 4 Reserved CAN2_TXD O5 CAN node 2 output (aka: TXDCAN2) IOM_MON2_7 IOM monitor input IOM_REF2_7 IOM reference input —O 6 Reserved CCU60_CC61 O7 CCU60 output IOM_MON1_1 IOM monitor input IOM_REF1_5 IOM reference input Table 2-36 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-90 V 1.0 2017-09 4 P02.3 I A1 / HighZ / VDDP3 General-purpose input TIM0_3 GTM_TIN ASCLIN1_RXG ASCLIN1 input (aka: ARX1G) CAN2_RXDB CAN node 2 input (aka: RXDCAN2B) P02.3 O0 General-purpose output TOM0_11 O1 GTM_TOUT TOM1_11 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) IOM_REF0_3 IOM reference input —O 2 Reserved QSPI3_SLSO4 O3 QSPI3 output (aka: SLSO34) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_COUT61 O7 CCU60 output IOM_MON1_4 IOM monitor input IOM_REF1_2 IOM reference input 5 P02.4 I A1+ / HighZ / VDDP3 General-purpose input TIM0_4 GTM_TIN QSPI3_SLSIA QSPI3 input (aka: SLSI3A) CAN0_RXDD CAN node 0 input (aka: RXDCAN0D) CCU60_CC62INA CCU60 input CCU61_CC62INB CCU61 input P02.4 O0 General-purpose output TOM0_12 O1 GTM_TOUT TOM1_12 GTM_TOUT TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) IOM_REF0_4 IOM reference input —O 2 Reserved QSPI3_SLSO0 O3 QSPI3 output (aka: SLSO30) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_CC62 O7 CCU60 output IOM_MON1_0 IOM monitor input IOM_REF1_4 IOM reference input Table 2-36 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-91 V 1.0 2017-09 6 P02.5 I A1+ / HighZ / VDDP3 General-purpose input TIM0_5 GTM_TIN QSPI3_MRSTA QSPI3 input (aka: MRST3A) SENT_SENT3C SENT input P02.5 O0 General-purpose output TOM0_13 O1 GTM_TOUT TOM1_13 GTM_TOUT TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) IOM_REF0_5 IOM reference input CAN0_TXD O2 CAN node 0 output (aka: TXDCAN0) IOM_MON2_5 IOM monitor input IOM_REF2_5 IOM reference input QSPI3_MRST O3 QSPI3 output (aka: MRST3) IOM_MON2_3 IOM monitor input IOM_REF2_3 IOM reference input —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_COUT62 O7 CCU60 output IOM_MON1_5 IOM monitor input IOM_REF1_1 IOM reference input Table 2-36 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-92 V 1.0 2017-09 7 P02.6 I A1 / HighZ / VDDP3 General-purpose input TIM0_6 GTM_TIN QSPI3_MTSRA QSPI3 input (aka: MTSR3A) SENT_SENT2C SENT input CCU60_CC60INC CCU60 input CCU60_CCPOS0A CCU60 input CCU61_T12HRB CCU61 input GPT120_T3INA GPT120 input P02.6 O0 General-purpose output TOM0_14 O1 GTM_TOUT TOM1_14 GTM_TOUT TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) IOM_REF0_6 IOM reference input —O 2 Reserved QSPI3_MTSR O3 QSPI3 output (aka: MTSR3) —O 4 Reserved VADC_EMUX00 O5 VADC output —O 6 Reserved CCU60_CC60 O7 CCU60 output IOM_MON1_2 IOM monitor input IOM_REF1_6 IOM reference input Table 2-36 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-93 V 1.0 2017-09 8 P02.7 I A1 / HighZ / VDDP3 General-purpose input TIM0_7 GTM_TIN QSPI3_SCLKA QSPI3 input (aka: SCLK3A) SENT_SENT1C SENT input CCU60_CC61INC CCU60 input CCU60_CCPOS1A CCU60 input CCU61_T13HRB CCU61 input GPT120_T3EUDA GPT120 input PMU_FDEST PMU input P02.7 O0 General-purpose output TOM0_15 O1 GTM_TOUT TOM1_15 GTM_TOUT TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) IOM_REF0_7 IOM reference input —O 2 Reserved QSPI3_SCLK O3 QSPI3 output (aka: SCLK3) —O 4 Reserved VADC_EMUX01 O5 VADC output SENT_SPC1 O6 SENT output CCU60_CC61 O7 CCU60 output IOM_MON1_1 IOM monitor input IOM_REF1_5 IOM reference input Table 2-36 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-94 V 1.0 2017-09 9 P02.8 I A1 / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN SENT_SENT0C SENT input CCU60_CC62INC CCU60 input CCU60_CCPOS2A CCU60 input CCU61_T12HRC CCU61 input CCU61_T13HRC CCU61 input GPT120_T4INA GPT120 input P02.8 O0 General-purpose output TOM0_8 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) IOM_REF0_8 IOM reference input QSPI3_SLSO5 O2 QSPI3 output (aka: SLSO35) —O 3 Reserved —O 4 Reserved VADC_EMUX02 O5 VADC output —O 6 Reserved CCU60_CC62 O7 CCU60 output IOM_MON1_0 IOM monitor input IOM_REF1_4 IOM reference input Table 2-36 Port 02 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-95 V 1.0 2017-09 Table 2-37 Port 10 Functions Pin Symbol Ctrl. Buffer Type Function 140 P10.1 I A1 / HighZ / VDDP3 General-purpose input TIM0_1 GTM_TIN QSPI1_MRSTA QSPI1 input (aka: MRST1A) GPT120_T5EUDB GPT120 input P10.1 O0 General-purpose output TOM0_1 O1 GTM_TOUT TOM1_9 GTM_TOUT QSPI1_MTSR O2 QSPI1 output (aka: MTSR1) QSPI1_MRST O3 QSPI1 output (aka: MRST1) IOM_MON2_1 IOM monitor input IOM_REF2_1 IOM reference input —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved 141 P10.2 I A1 / HighZ / VDDP3 General-purpose input TIM0_2 GTM_TIN QSPI1_SCLKA QSPI1 input (aka: SCLK1A) CAN2_RXDE CAN node 2 input (aka: RXDCAN2E) SCU_REQ2 SCU input GPT120_T6INB GPT120 input P10.2 O0 General-purpose output TOM0_2 O1 GTM_TOUT TOM1_10 GTM_TOUT IOM_MON2_9 IOM monitor input —O 2 Reserved QSPI1_SCLK O3 QSPI1 output (aka: SCLK1) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-96 V 1.0 2017-09 142 P10.3 I A1 / HighZ / VDDP3 General-purpose input TIM0_3 GTM_TIN QSPI1_MTSRA QSPI1 input (aka: MTSR1A) SCU_REQ3 SCU input GPT120_T5INB GPT120 input P10.3 O0 General-purpose output TOM0_3 O1 GTM_TOUT TOM1_11 GTM_TOUT IOM_MON2_10 IOM monitor input —O 2 Reserved QSPI1_MTSR O3 QSPI1 output (aka: MTSR1) —O 4 Reserved —O 5 Reserved CAN2_TXD O6 CAN node 2 output (aka: TXDCAN2) IOM_MON2_7 IOM monitor input IOM_REF2_7 IOM reference input —O 7 Reserved 143 P10.5 I A1 / HighZ / VDDP3 General-purpose input TIM0_2 GTM_TIN SCU_HWCFG4 SCU input P10.5 O0 General-purpose output TOM0_2 O1 GTM_TOUT TOM1_10 GTM_TOUT IOM_REF2_9 IOM reference input —O 2 Reserved QSPI3_SLSO8 O3 QSPI3 output (aka: SLSO38) QSPI1_SLSO9 O4 QSPI1 output (aka: SLSO19) GPT120_T6OUT O5 GPT120 output —O 6 Reserved —O 7 Reserved Table 2-37 Port 10 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-97 V 1.0 2017-09 144 P10.6 I A1 / HighZ / VDDP3 General-purpose input TIM0_3 GTM_TIN QSPI3_MTSRB QSPI3 input (aka: MTSR3B) SCU_HWCFG5 SCU input P10.6 O0 General-purpose output TOM0_3 O1 GTM_TOUT TOM1_11 GTM_TOUT IOM_REF2_10 IOM reference input —O 2 Reserved QSPI3_MTSR O3 QSPI3 output (aka: MTSR3) GPT120_T3OUT O4 GPT120 output —O 5 Reserved QSPI1_MRST O6 QSPI1 output (aka: MRST1) IOM_MON2_1 IOM monitor input IOM_REF2_1 IOM reference input —O 7 Reserved Table 2-38 Port 11 Functions Pin Symbol Ctrl. Buffer Type Function 132 P11.2 I A1+ / HighZ / VDDP3 General-purpose input P11.2 O0 General-purpose output TOM0_8 O1 GTM_TOUT TOM1_1 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) —O 2 Reserved QSPI0_SLSO5 O3 QSPI0 output (aka: SLSO05) QSPI1_SLSO5 O4 QSPI1 output (aka: SLSO15) CCU61_COUT63 O5 CCU61 output IOM_MON1_7 IOM monitor input IOM_REF1_7 IOM reference input —O 6 Reserved CCU60_COUT63 O7 CCU60 output IOM_MON1_6 IOM monitor input IOM_REF1_0 IOM reference input Table 2-37 Port 10 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-98 V 1.0 2017-09 133 P11.3 I A1+ / HighZ / VDDP3 General-purpose input QSPI1_MRSTB QSPI1 input (aka: MRST1B) P11.3 O0 General-purpose output TOM0_10 O1 GTM_TOUT TOM1_2 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) —O 2 Reserved QSPI1_MRST O3 QSPI1 output (aka: MRST1) IOM_MON2_1 IOM monitor input IOM_REF2_1 IOM reference input —O 4 Reserved CCU61_COUT62 O5 CCU61 output IOM_MON1_13 IOM monitor input IOM_REF1_8 IOM reference input —O 6 Reserved CCU60_COUT62 O7 CCU60 output IOM_MON1_5 IOM monitor input IOM_REF1_1 IOM reference input 134 P11.6 I A1+ / HighZ / VDDP3 General-purpose input QSPI1_SCLKB QSPI1 input (aka: SCLK1B) P11.6 O0 General-purpose output TOM0_11 O1 GTM_TOUT TOM1_3 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) —O 2 Reserved QSPI1_SCLK O3 QSPI1 output (aka: SCLK1) —O 4 Reserved CCU61_COUT61 O5 CCU61 output IOM_MON1_12 IOM monitor input IOM_REF1_9 IOM reference input —O 6 Reserved CCU60_COUT61 O7 CCU60 output IOM_MON1_4 IOM monitor input IOM_REF1_2 IOM reference input Table 2-38 Port 11 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-99 V 1.0 2017-09 136 P11.8 I A1 / HighZ / VDDP3 General-purpose input QSPI1_MTSRC QSPI1 input (aka: MTSR1C) P11.8 O0 General-purpose output TOM0_4 O1 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) —O 2 Reserved QSPI1_SLSO10 O3 QSPI1 output (aka: SLSO110) QSPI1_MTSR O4 QSPI1 output (aka: MTSR1) —O 5 Reserved —O 6 Reserved —O 7 Reserved 135 P11.9 I A1+ / HighZ / VDDP3 General-purpose input QSPI1_MTSRB QSPI1 input (aka: MTSR1B) P11.9 O0 General-purpose output TOM0_12 O1 GTM_TOUT TOM1_4 GTM_TOUT (= DTM5_OUT4) TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) —O 2 Reserved QSPI1_MTSR O3 QSPI1 output (aka: MTSR1) —O 4 Reserved CCU61_COUT60 O5 CCU61 output IOM_MON1_11 IOM monitor input IOM_REF1_10 IOM reference input —O 6 Reserved CCU60_COUT60 O7 CCU60 output IOM_MON1_3 IOM monitor input IOM_REF1_3 IOM reference input Table 2-38 Port 11 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-100 V 1.0 2017-09 137 P11.10 I A1+ / HighZ / VDDP3 General-purpose input ASCLIN1_RXE ASCLIN1 input (aka: ARX1E) SCU_REQ12 SCU input P11.10 O0 General-purpose output TOM0_13 O1 GTM_TOUT TOM1_5 GTM_TOUT (= DTM5_OUT5) TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) —O 2 Reserved QSPI0_SLSO3 O3 QSPI0 output (aka: SLSO03) QSPI1_SLSO3 O4 QSPI1 output (aka: SLSO13) CCU61_CC62 O5 CCU61 output IOM_MON1_10 IOM monitor input IOM_REF1_11 IOM reference input —O 6 Reserved CCU60_CC62 O7 CCU60 output IOM_MON1_0 IOM monitor input IOM_REF1_4 IOM reference input 138 P11.11 I A1+ / HighZ / VDDP3 General-purpose input P11.11 O0 General-purpose output TOM0_14 O1 GTM_TOUT TOM1_6 GTM_TOUT (= DTM5_OUT6) TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) —O 2 Reserved QSPI0_SLSO4 O3 QSPI0 output (aka: SLSO04) QSPI1_SLSO4 O4 QSPI1 output (aka: SLSO14) CCU61_CC61 O5 CCU61 output IOM_MON1_9 IOM monitor input IOM_REF1_12 IOM reference input —O 6 Reserved CCU60_CC61 O7 CCU60 output IOM_MON1_1 IOM monitor input IOM_REF1_5 IOM reference input Table 2-38 Port 11 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-101 V 1.0 2017-09 139 P11.12 I A1+ / HighZ / VDDP3 General-purpose input P11.12 O0 General-purpose output TOM0_15 O1 GTM_TOUT TOM1_7 GTM_TOUT (= DTM5_OUT7) TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input GTM_CLK2 O3 GTM output —O 4 Reserved CCU61_CC60 O5 CCU61 output IOM_MON1_8 IOM monitor input IOM_REF1_13 IOM reference input SCU_EXTCLK1 O6 SCU output CCU60_CC60 O7 CCU60 output IOM_MON1_2 IOM monitor input IOM_REF1_6 IOM reference input Table 2-39 Port 13 Functions Pin Symbol Ctrl. Buffer Type Function 128 P13.0 I A1 / HighZ / VDDP3 General-purpose input CCU60_CTRAPA CCU60 input GPT120_T6EUDB GPT120 input P13.0 O0 General-purpose output TOM0_5 O1 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) —O 2 Reserved QSPI2_SCLK O3 QSPI2 output (aka: SCLK2) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-38 Port 11 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-102 V 1.0 2017-09 129 P13.1 I A1 / HighZ / VDDP3 General-purpose input CCU60_CCPOS0C CCU60 input GPT120_T3INB GPT120 input P13.1 O0 General-purpose output TOM0_6 O1 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved 130 P13.2 I A1 / HighZ / VDDP3 General-purpose input CCU60_CCPOS1C CCU60 input GPT120_T3EUDB GPT120 input GPT120_CAPINA GPT120 input P13.2 O0 General-purpose output TOM0_7 O1 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-39 Port 13 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-103 V 1.0 2017-09 131 P13.3 I A1 / HighZ / VDDP3 General-purpose input CCU60_CCPOS2C CCU60 input GPT120_T4INB GPT120 input P13.3 O0 General-purpose output TOM0_8 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_4 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) —O 2 Reserved QSPI2_MTSR O3 QSPI2 output (aka: MTSR2) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-40 Port 14 Functions Pin Symbol Ctrl. Buffer Type Function 118 P14.0 I A1+ / HighZ / VDDP3 General-purpose input TIM0_3 GTM_TIN P14.0 O0 General-purpose output TOM0_3 O1 GTM_TOUT TOM1_3 GTM_TOUT TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) ASCLIN0_TX O2 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input —O 3 Reserved —O 4 Reserved CAN1_TXD O5 CAN node 1 output (aka: TXDCAN1) IOM_MON2_6 IOM monitor input IOM_REF2_6 IOM reference input ASCLIN0_SCLK O6 ASCLIN0 output (aka: ASCLK0) CCU60_COUT62 O7 CCU60 output IOM_MON1_5 IOM monitor input IOM_REF1_1 IOM reference input Table 2-39 Port 13 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-104 V 1.0 2017-09 119 P14.1 I A1+ / HighZ / VDDP3 General-purpose input TIM0_4 GTM_TIN ASCLIN0_RXA ASCLIN0 input (aka: ARX0A) CAN1_RXDB CAN node 1 input (aka: RXDCAN1B) SCU_REQ15 SCU input SCU_EVRWUPA AI SCU input P14.1 O0 General-purpose output TOM0_4 O1 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) IOM_REF1_14 IOM reference input ASCLIN0_TX O2 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_COUT63 O7 CCU60 output IOM_MON1_6 IOM monitor input IOM_REF1_0 IOM reference input 120 P14.2 I A1 / PU / VDDP3 General-purpose input TIM0_5 GTM_TIN SCU_HWCFG2_EVR13 SCU input P14.2 O0 General-purpose output TOM0_5 O1 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) IOM_REF1_15 IOM reference input —O 2 Reserved QSPI2_SLSO1 O3 QSPI2 output (aka: SLSO21) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-40 Port 14 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-105 V 1.0 2017-09 121 P14.3 I A1 / PU / VDDP3 General-purpose input TIM0_6 GTM_TIN SCU_REQ10 SCU input SCU_HWCFG3_BMI SCU input P14.3 O0 General-purpose output TOM0_6 O1 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) IOM_REF2_4 IOM reference input —O 2 Reserved QSPI2_SLSO3 O3 QSPI2 output (aka: SLSO23) ASCLIN1_SLSO O4 ASCLIN1 output (aka: ASLSO1) —O 5 Reserved —O 6 Reserved —O 7 Reserved 122 P14.4 I A1+ / HighZ / VDDP3 General-purpose input TIM0_7 GTM_TIN P14.4 O0 General-purpose output TOM0_7 O1 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) IOM_REF2_8 IOM reference input —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-40 Port 14 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-106 V 1.0 2017-09 123 P14.5 I A1+ / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN P14.5 O0 General-purpose output TOM0_0 O1 GTM_TOUT TOM1_0 GTM_TOUT IOM_REF2_11 IOM reference input —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved 124 P14.6 I A1+ / PU / VDDP3 General-purpose input TIM0_1 GTM_TIN QSPI0_MRSTD QSPI0 input (aka: MRST0D) P14.6 O0 General-purpose output TOM0_1 O1 GTM_TOUT TOM1_1 GTM_TOUT IOM_REF2_14 IOM reference input —O 2 Reserved QSPI2_SLSO2 O3 QSPI2 output (aka: SLSO22) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved 125 P14.7 I A1 / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN P14.7 O0 General-purpose output TOM0_0 O1 GTM_TOUT IOM_REF2_15 IOM reference input ASCLIN0_RTS O2 ASCLIN0 output (aka: ARTS0) QSPI2_SLSO4 O3 QSPI2 output (aka: SLSO24) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-40 Port 14 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-107 V 1.0 2017-09 127 P14.8 I A1 / HighZ / VDDP3 General-purpose input ASCLIN1_RXD ASCLIN1 input (aka: ARX1D) CAN2_RXDD CAN node 2 input (aka: RXDCAN2D) P14.8 O0 General-purpose output TOM0_2 O1 GTM_TOUT —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-41 Port 15 Functions Pin Symbol Ctrl. Buffer Type Function 109 P15.0 I A1 / HighZ / VDDP3 General-purpose input P15.0 O0 General-purpose output TOM1_3 O1 GTM_TOUT TOM0_11 GTM_TOUT TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input QSPI0_SLSO13 O3 QSPI0 output (aka: SLSO013) —O 4 Reserved CAN2_TXD O5 CAN node 2 output (aka: TXDCAN2) IOM_MON2_7 IOM monitor input IOM_REF2_7 IOM reference input ASCLIN1_SCLK O6 ASCLIN1 output (aka: ASCLK1) —O 7 Reserved Table 2-40 Port 14 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-108 V 1.0 2017-09 110 P15.1 I A1 / HighZ / VDDP3 General-purpose input ASCLIN1_RXA ASCLIN1 input (aka: ARX1A) QSPI2_SLSIB QSPI2 input (aka: SLSI2B) CAN2_RXDA CAN node 2 input (aka: RXDCAN2A) SCU_REQ16 SCU input SCU_EVRWUPB AI SCU input P15.1 O0 General-purpose output TOM1_4 O1 GTM_TOUT (= DTM5_OUT4) TOM0_12 GTM_TOUT TOM0_4 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input QSPI2_SLSO5 O3 QSPI2 output (aka: SLSO25) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved 111 P15.2 I A1 / HighZ / VDDP3 General-purpose input QSPI2_MRSTE QSPI2 input (aka: MRST2E) QSPI2_SLSIA QSPI2 input (aka: SLSI2A) QSPI2_HSICINA QSPI2 input (aka: HSIC2INA) P15.2 O0 General-purpose output TOM1_5 O1 GTM_TOUT (= DTM5_OUT5) TOM0_13 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) ASCLIN0_TX O2 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input QSPI2_SLSO0 O3 QSPI2 output (aka: SLSO20) —O 4 Reserved CAN1_TXD O5 CAN node 1 output (aka: TXDCAN1) IOM_MON2_6 IOM monitor input IOM_REF2_6 IOM reference input ASCLIN0_SCLK O6 ASCLIN0 output (aka: ASCLK0) —O 7 Reserved Table 2-41 Port 15 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-109 V 1.0 2017-09 112 P15.3 I A1 / HighZ / VDDP3 General-purpose input ASCLIN0_RXB ASCLIN0 input (aka: ARX0B) QSPI2_SCLKA QSPI2 input (aka: SCLK2A) QSPI2_HSICINB QSPI2 input (aka: HSIC2INB) CAN1_RXDA CAN node 1 input (aka: RXDCAN1A) P15.3 O0 General-purpose output TOM1_6 O1 GTM_TOUT (= DTM5_OUT6) TOM0_14 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) ASCLIN0_TX O2 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input QSPI2_SCLK O3 QSPI2 output (aka: SCLK2) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved 113 P15.4 I A1 / HighZ / VDDP3 General-purpose input QSPI2_MRSTA QSPI2 input (aka: MRST2A) SCU_REQ0 SCU input P15.4 O0 General-purpose output TOM1_7 O1 GTM_TOUT (= DTM5_OUT7) TOM0_15 GTM_TOUT ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input QSPI2_MRST O3 QSPI2 output (aka: MRST2) IOM_MON2_2 IOM monitor input IOM_REF2_2 IOM reference input —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_CC62 O7 CCU60 output IOM_MON1_0 IOM monitor input IOM_REF1_4 IOM reference input Table 2-41 Port 15 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-110 V 1.0 2017-09 114 P15.5 I A1 / HighZ / VDDP3 General-purpose input ASCLIN1_RXB ASCLIN1 input (aka: ARX1B) QSPI2_MTSRA QSPI2 input (aka: MTSR2A) SCU_REQ13 SCU input P15.5 O0 General-purpose output TOM0_0 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input QSPI2_MTSR O3 QSPI2 output (aka: MTSR2) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_CC61 O7 CCU60 output IOM_MON1_1 IOM monitor input IOM_REF1_5 IOM reference input 115 P15.6 I A1 / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN QSPI2_MTSRB QSPI2 input (aka: MTSR2B) P15.6 O0 General-purpose output TOM0_0 O1 GTM_TOUT TOM1_0 GTM_TOUT —O 2 Reserved QSPI2_MTSR O3 QSPI2 output (aka: MTSR2) —O 4 Reserved QSPI2_SCLK O5 QSPI2 output (aka: SCLK2) —O 6 Reserved CCU60_CC60 O7 CCU60 output IOM_MON1_2 IOM monitor input IOM_REF1_6 IOM reference input Table 2-41 Port 15 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-111 V 1.0 2017-09 116 P15.7 I A1 / HighZ / VDDP3 General-purpose input TIM0_1 GTM_TIN QSPI2_MRSTB QSPI2 input (aka: MRST2B) P15.7 O0 General-purpose output TOM0_1 O1 GTM_TOUT TOM1_1 GTM_TOUT —O 2 Reserved QSPI2_MRST O3 QSPI2 output (aka: MRST2) IOM_MON2_2 IOM monitor input IOM_REF2_2 IOM reference input —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_COUT60 O7 CCU60 output IOM_MON1_3 IOM monitor input IOM_REF1_3 IOM reference input 117 P15.8 I A1 / HighZ / VDDP3 General-purpose input TIM0_2 GTM_TIN QSPI2_SCLKB QSPI2 input (aka: SCLK2B) SCU_REQ1 SCU input P15.8 O0 General-purpose output TOM0_2 O1 GTM_TOUT TOM1_2 GTM_TOUT —O 2 Reserved QSPI2_SCLK O3 QSPI2 output (aka: SCLK2) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU60_COUT61 O7 CCU60 output IOM_MON1_4 IOM monitor input IOM_REF1_2 IOM reference input Table 2-41 Port 15 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-112 V 1.0 2017-09 Table 2-42 Port 20 Functions Pin Symbol Ctrl. Buffer Type Function 93 P20.0 I A1 / HighZ / VDDP3 General-purpose input TIM0_6 GTM_TIN SCU_REQ9 SCU input OCDS_TGI0 OCDS input GPT120_T6EUDA GPT120 input P20.0 O0 General-purpose output TOM0_6 O1 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved OCDS_TGO0 O OCDS 94 P20.2 I Input Only / PU / VDDP3 General-purpose input TESTMODE Factory Test Mode Enable 95 P20.3 I A1 / HighZ / VDDP3 General-purpose input TIM0_4 GTM_TIN GPT120_T6INA GPT120 input P20.3 O0 General-purpose output TOM1_12 O1 GTM_TOUT TOM0_4 GTM_TOUT (= DTM1_OUT4) IOM_MON1_14 IOM monitor input —O 2 Reserved QSPI0_SLSO9 O3 QSPI0 output (aka: SLSO09) QSPI2_SLSO9 O4 QSPI2 output (aka: SLSO29) —O 5 Reserved —O 6 Reserved —O 7 Reserved

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-113 V 1.0 2017-09 100 P20.6 I A1 / HighZ / VDDP3 General-purpose input TIM0_6 GTM_TIN P20.6 O0 General-purpose output TOM1_10 O1 GTM_TOUT TOM0_10 GTM_TOUT IOM_MON1_15 IOM monitor input ASCLIN1_RTS O2 ASCLIN1 output (aka: ARTS1) QSPI0_SLSO8 O3 QSPI0 output (aka: SLSO08) QSPI2_SLSO8 O4 QSPI2 output (aka: SLSO28) —O 5 Reserved —O 6 Reserved —O 7 Reserved 101 P20.7 I A1 / HighZ / VDDP3 General-purpose input TIM0_7 GTM_TIN ASCLIN1_CTSA ASCLIN1 input (aka: ACTS1A) CAN0_RXDB CAN node 0 input (aka: RXDCAN0B) P20.7 O0 General-purpose output TOM1_11 O1 GTM_TOUT TOM0_11 GTM_TOUT IOM_MON2_4 IOM monitor input —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU61_COUT63 O7 CCU61 output IOM_MON1_7 IOM monitor input IOM_REF1_7 IOM reference input Table 2-42 Port 20 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-114 V 1.0 2017-09 102 P20.8 I A1 / HighZ / VDDP3 General-purpose input TIM0_7 GTM_TIN P20.8 O0 General-purpose output TOM1_7 O1 GTM_TOUT (= DTM5_OUT7) TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM0_4 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) IOM_MON2_8 IOM monitor input ASCLIN1_SLSO O2 ASCLIN1 output (aka: ASLSO1) QSPI0_SLSO0 O3 QSPI0 output (aka: SLSO00) QSPI1_SLSO0 O4 QSPI1 output (aka: SLSO10) CAN0_TXD O5 CAN node 0 output (aka: TXDCAN0) IOM_MON2_5 IOM monitor input IOM_REF2_5 IOM reference input SCU_WDT0LCK O6 SCU output CCU61_CC60 O7 CCU61 output IOM_MON1_8 IOM monitor input IOM_REF1_13 IOM reference input 103 P20.9 I A1 / HighZ / VDDP3 General-purpose input ASCLIN1_RXC ASCLIN1 input (aka: ARX1C) QSPI0_SLSIB QSPI0 input (aka: SLSI0B) SCU_REQ11 SCU input P20.9 O0 General-purpose output TOM1_13 O1 GTM_TOUT TOM0_13 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) IOM_MON2_11 IOM monitor input —O 2 Reserved QSPI0_SLSO1 O3 QSPI0 output (aka: SLSO01) QSPI1_SLSO1 O4 QSPI1 output (aka: SLSO11) —O 5 Reserved SCU_WDTSLCK O6 SCU output CCU61_CC61 O7 CCU61 output IOM_MON1_9 IOM monitor input IOM_REF1_12 IOM reference input Table 2-42 Port 20 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-115 V 1.0 2017-09 104 P20.10 I A1 / HighZ / VDDP3 General-purpose input P20.10 O0 General-purpose output TOM1_14 O1 GTM_TOUT TOM0_14 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) IOM_MON2_14 IOM monitor input ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input QSPI0_SLSO6 O3 QSPI0 output (aka: SLSO06) QSPI2_SLSO7 O4 QSPI2 output (aka: SLSO27) —O 5 Reserved ASCLIN1_SCLK O6 ASCLIN1 output (aka: ASCLK1) CCU61_CC62 O7 CCU61 output IOM_MON1_10 IOM monitor input IOM_REF1_11 IOM reference input 105 P20.11 I A1+ / HighZ / VDDP3 General-purpose input QSPI0_SCLKA QSPI0 input (aka: SCLK0A) P20.11 O0 General-purpose output TOM1_15 O1 GTM_TOUT TOM0_15 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) IOM_MON2_15 IOM monitor input —O 2 Reserved QSPI0_SCLK O3 QSPI0 output (aka: SCLK0) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU61_COUT60 O7 CCU61 output IOM_MON1_11 IOM monitor input IOM_REF1_10 IOM reference input Table 2-42 Port 20 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-116 V 1.0 2017-09 106 P20.12 I A1 / HighZ / VDDP3 General-purpose input QSPI0_MRSTA QSPI0 input (aka: MRST0A) IOM_PIN13 IOM pad input P20.12 O0 General-purpose output TOM1_0 O1 GTM_TOUT TOM0_8 GTM_TOUT TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) IOM_MON0_13 IOM monitor input —O 2 Reserved QSPI0_MRST O3 QSPI0 output (aka: MRST0) IOM_MON2_0 IOM monitor input IOM_REF2_0 IOM reference input QSPI0_MTSR O4 QSPI0 output (aka: MTSR0) —O 5 Reserved —O 6 Reserved CCU61_COUT61 O7 CCU61 output IOM_MON1_12 IOM monitor input IOM_REF1_9 IOM reference input 107 P20.13 I A1+ / HighZ / VDDP3 General-purpose input QSPI0_SLSIA QSPI0 input (aka: SLSI0A) IOM_PIN14 IOM pad input P20.13 O0 General-purpose output TOM1_1 O1 GTM_TOUT TOM0_9 GTM_TOUT TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) IOM_MON0_14 IOM monitor input —O 2 Reserved QSPI0_SLSO2 O3 QSPI0 output (aka: SLSO02) QSPI1_SLSO2 O4 QSPI1 output (aka: SLSO12) QSPI0_SCLK O5 QSPI0 output (aka: SCLK0) —O 6 Reserved CCU61_COUT62 O7 CCU61 output IOM_MON1_13 IOM monitor input IOM_REF1_8 IOM reference input Table 2-42 Port 20 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-117 V 1.0 2017-09 108 P20.14 I A1+ / HighZ / VDDP3 General-purpose input QSPI0_MTSRA QSPI0 input (aka: MTSR0A) IOM_PIN15 IOM pad input P20.14 O0 General-purpose output TOM1_2 O1 GTM_TOUT TOM0_10 GTM_TOUT TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) IOM_MON0_15 IOM monitor input —O 2 Reserved QSPI0_MTSR O3 QSPI0 output (aka: MTSR0) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-43 Port 21 Functions Pin Symbol Ctrl. Buffer Type Function 84 P21.2 I A1 / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN SCU_EMGSTOPB SCU input P21.2 O0 General-purpose output TOM0_0 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_4 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-42 Port 20 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-118 V 1.0 2017-09 85 P21.3 I A1 / HighZ / VDDP3 General-purpose input TIM0_1 GTM_TIN P21.3 O0 General-purpose output TOM0_1 O1 GTM_TOUT TOM1_1 GTM_TOUT TOM0_4N GTM_TOUT (= DTM1_OUT4_N) TOM1_4N GTM_TOUT (= DTM5_OUT4_N) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved 86 P21.4 I A1 / HighZ / VDDP3 General-purpose input TIM0_2 GTM_TIN P21.4 O0 General-purpose output TOM0_2 O1 GTM_TOUT TOM1_2 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-43 Port 21 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-119 V 1.0 2017-09 87 P21.5 I A1 / HighZ / VDDP3 General-purpose input TIM0_3 GTM_TIN P21.5 O0 General-purpose output TOM0_3 O1 GTM_TOUT TOM1_3 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved 88 P21.6 I A1 / PU / VDDP3 General-purpose input TIM0_4 GTM_TIN TDI OCDS input OCDS_TGI2 OCDS input GPT120_T5EUDA GPT120 input P21.6 O0 General-purpose output TOM0_4 O1 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved GPT120_T3OUT O7 GPT120 output OCDS_TGO2 O OCDS Table 2-43 Port 21 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-120 V 1.0 2017-09 90 P21.7 I A1+ / PU / VDDP3 General-purpose input TIM0_5 GTM_TIN OCDS_DAP2 OCDS input OCDS_TGI3 OCDS input GPT120_T5INA GPT120 input P21.7 O0 General-purpose output TOM0_5 O1 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved GPT120_T6OUT O7 GPT120 output OCDS_TGO3 O OCDS OCDS_DAP2 O OCDS Output TDO O JTAG Output Table 2-44 Port 22 Functions Pin Symbol Ctrl. Buffer Type Function 74 P22.0 I A1 / HighZ / VDDP3 General-purpose input TIM0_1 GTM_TIN QSPI3_MTSRE QSPI3 input (aka: MTSR3E) P22.0 O0 General-purpose output TOM0_9 O1 GTM_TOUT TOM1_1 GTM_TOUT —O 2 Reserved QSPI3_MTSR O3 QSPI3 output (aka: MTSR3) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-43 Port 21 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-121 V 1.0 2017-09 75 P22.1 I A1 / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN QSPI3_MRSTE QSPI3 input (aka: MRST3E) P22.1 O0 General-purpose output TOM0_8 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) —O 2 Reserved QSPI3_MRST O3 QSPI3 output (aka: MRST3) IOM_MON2_3 IOM monitor input IOM_REF2_3 IOM reference input —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved 76 P22.2 I A1 / HighZ / VDDP3 General-purpose input TIM0_3 GTM_TIN QSPI3_SLSID QSPI3 input (aka: SLSI3D) P22.2 O0 General-purpose output TOM0_11 O1 GTM_TOUT TOM1_3 GTM_TOUT TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) —O 2 Reserved QSPI3_SLSO12 O3 QSPI3 output (aka: SLSO312) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-44 Port 22 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-122 V 1.0 2017-09 77 P22.3 I A1 / HighZ / VDDP3 General-purpose input TIM0_4 GTM_TIN QSPI3_SCLKE QSPI3 input (aka: SCLK3E) P22.3 O0 General-purpose output TOM0_12 O1 GTM_TOUT TOM1_4 GTM_TOUT (= DTM5_OUT4) TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) —O 2 Reserved QSPI3_SCLK O3 QSPI3 output (aka: SCLK3) —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved 78 P22.4 I A1 / HighZ / VDDP3 General-purpose input P22.4 O0 General-purpose output TOM0_7N O1 GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) —O 2 Reserved —O 3 Reserved QSPI0_SLSO12 O4 QSPI0 output (aka: SLSO012) —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-44 Port 22 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-123 V 1.0 2017-09 Table 2-45 Port 23 Functions Pin Symbol Ctrl. Buffer Type Function 73 P23.1 I A1+ / HighZ / VDDP3 General-purpose input TIM0_6 GTM_TIN P23.1 O0 General-purpose output TOM0_6 O1 GTM_TOUT (= DTM1_OUT6) TOM0_15 GTM_TOUT ASCLIN1_RTS O2 ASCLIN1 output (aka: ARTS1) QSPI3_SLSO13 O3 QSPI3 output (aka: SLSO313) GTM_CLK0 O4 GTM output SCU_EXTCLK1 O5 SCU output SCU_EXTCLK0 O6 SCU output —O 7 Reserved Table 2-46 Port 33 Functions Pin Symbol Ctrl. Buffer Type Function 56 P33.0 I A1 / HighZ / VDDP3 General-purpose input TIM0_4 GTM_TIN IOM_PIN0 IOM pad input P33.0 O0 General-purpose output TOM0_4 O1 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) IOM_MON0_0 IOM monitor input —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved VADC_G1BFL0 O6 VADC output —O 7 Reserved

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-124 V 1.0 2017-09 57 P33.1 I A1 / HighZ / VDDP3 General-purpose input TIM0_5 GTM_TIN IOM_PIN1 IOM pad input P33.1 O0 General-purpose output TOM0_5 O1 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) IOM_MON0_1 IOM monitor input —O 2 Reserved —O 3 Reserved —O 4 Reserved VADC_EMUX02 O5 VADC output VADC_G1BFL1 O6 VADC output —O 7 Reserved 58 P33.2 I A1 / HighZ / VDDP3 General-purpose input TIM0_6 GTM_TIN IOM_PIN2 IOM pad input P33.2 O0 General-purpose output TOM0_6 O1 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) IOM_MON0_2 IOM monitor input —O 2 Reserved —O 3 Reserved —O 4 Reserved VADC_EMUX01 O5 VADC output VADC_G1BFL2 O6 VADC output CCU61_COUT63 O7 CCU61 output IOM_MON1_7 IOM monitor input IOM_REF1_7 IOM reference input Table 2-46 Port 33 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-125 V 1.0 2017-09 59 P33.3 I A1 / HighZ / VDDP3 General-purpose input TIM0_7 GTM_TIN IOM_PIN3 IOM pad input P33.3 O0 General-purpose output TOM0_7 O1 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) IOM_MON0_3 IOM monitor input —O 2 Reserved —O 3 Reserved —O 4 Reserved VADC_EMUX00 O5 VADC output VADC_G1BFL3 O6 VADC output CCU61_CC60 O7 CCU61 output IOM_MON1_8 IOM monitor input IOM_REF1_13 IOM reference input 60 P33.4 I A1 / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN CCU61_CTRAPC CCU61 input IOM_PIN4 IOM pad input P33.4 O0 General-purpose output TOM0_0 O1 GTM_TOUT TOM1_0 GTM_TOUT IOM_MON0_4 IOM monitor input —O 2 Reserved —O 3 Reserved —O 4 Reserved VADC_EMUX12 O5 VADC output VADC_G0BFL0 O6 VADC output —O 7 Reserved Table 2-46 Port 33 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-126 V 1.0 2017-09 61 P33.5 I A1 / HighZ / VDDP3 General-purpose input TIM0_1 GTM_TIN CCU61_CCPOS2C CCU61 input GPT120_T4EUDB GPT120 input IOM_PIN5 IOM pad input P33.5 O0 General-purpose output TOM0_1 O1 GTM_TOUT TOM1_1 GTM_TOUT TOM0_5 GTM_TOUT (= DTM1_OUT5) TOM1_5 GTM_TOUT (= DTM5_OUT5) IOM_MON0_5 IOM monitor input QSPI0_SLSO7 O2 QSPI0 output (aka: SLSO07) QSPI1_SLSO7 O3 QSPI1 output (aka: SLSO17) —O 4 Reserved VADC_EMUX11 O5 VADC output VADC_G0BFL1 O6 VADC output CCU61_CC60 O7 CCU61 output IOM_MON1_8 IOM monitor input IOM_REF1_13 IOM reference input Table 2-46 Port 33 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-127 V 1.0 2017-09 62 P33.6 I A1 / HighZ / VDDP3 General-purpose input TIM0_2 GTM_TIN ASCLIN1_RXF ASCLIN1 input (aka: ARX1F) CCU61_CCPOS1C CCU61 input GPT120_T2EUDB GPT120 input IOM_PIN6 IOM pad input P33.6 O0 General-purpose output TOM0_2 O1 GTM_TOUT TOM1_2 GTM_TOUT TOM0_5N GTM_TOUT (= DTM1_OUT5_N) TOM1_5N GTM_TOUT (= DTM5_OUT5_N) IOM_MON0_6 IOM monitor input —O 2 Reserved —O 3 Reserved ASCLIN1_TX O4 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input VADC_EMUX10 O5 VADC output VADC_G0BFL2 O6 VADC output CCU61_CC61 O7 CCU61 output IOM_MON1_9 IOM monitor input IOM_REF1_12 IOM reference input Table 2-46 Port 33 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-128 V 1.0 2017-09 63 P33.7 I A1+ / HighZ / VDDP3 General-purpose input TIM0_3 GTM_TIN CAN0_RXDE CAN node 0 input (aka: RXDCAN0E) SCU_REQ8 SCU input CCU61_CCPOS0C CCU61 input GPT120_T2INB GPT120 input IOM_PIN7 IOM pad input P33.7 O0 General-purpose output TOM0_3 O1 GTM_TOUT TOM1_3 GTM_TOUT TOM0_6 GTM_TOUT (= DTM1_OUT6) TOM1_6 GTM_TOUT (= DTM5_OUT6) IOM_MON0_7 IOM monitor input —O 2 Reserved QSPI3_SLSO7 O3 QSPI3 output (aka: SLSO37) —O 4 Reserved —O 5 Reserved VADC_G0BFL3 O6 VADC output CCU61_COUT60 O7 CCU61 output IOM_MON1_11 IOM monitor input IOM_REF1_10 IOM reference input Table 2-46 Port 33 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-129 V 1.0 2017-09 64 P33.8 I A1+ / HighZ / VDDP3 General-purpose input TIM0_4 GTM_TIN SCU_EMGSTOPA SCU input IOM_PIN8 IOM pad input P33.8 O0 General-purpose output TOM0_4 O1 GTM_TOUT (= DTM1_OUT4) TOM1_4 GTM_TOUT (= DTM5_OUT4) TOM0_6N GTM_TOUT (= DTM1_OUT6_N) TOM1_6N GTM_TOUT (= DTM5_OUT6_N) IOM_MON0_8 IOM monitor input —O 2 Reserved QSPI3_SLSO2 O3 QSPI3 output (aka: SLSO32) —O 4 Reserved CAN0_TXD O5 CAN node 0 output (aka: TXDCAN0) IOM_MON2_5 IOM monitor input IOM_REF2_5 IOM reference input —O 6 Reserved CCU61_COUT62 O7 CCU61 output IOM_MON1_13 IOM monitor input IOM_REF1_8 IOM reference input SMU_FSP O SMU Table 2-46 Port 33 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-130 V 1.0 2017-09 65 P33.9 I A1 / HighZ / VDDP3 General-purpose input TIM0_1 GTM_TIN QSPI3_HSICINA QSPI3 input (aka: HSIC3INA) IOM_PIN9 IOM pad input P33.9 O0 General-purpose output TOM0_1 O1 GTM_TOUT TOM1_1 GTM_TOUT TOM0_7 GTM_TOUT (= DTM1_OUT7) TOM1_7 GTM_TOUT (= DTM5_OUT7) IOM_MON0_9 IOM monitor input —O 2 Reserved QSPI3_SLSO1 O3 QSPI3 output (aka: SLSO31) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU61_CC62 O7 CCU61 output IOM_MON1_10 IOM monitor input IOM_REF1_11 IOM reference input 66 P33.10 I A1+ / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN QSPI3_SLSIC QSPI3 input (aka: SLSI3C) QSPI3_HSICINB QSPI3 input (aka: HSIC3INB) IOM_PIN10 IOM pad input P33.10 O0 General-purpose output TOM0_0 O1 GTM_TOUT TOM1_0 GTM_TOUT TOM0_7N GTM_TOUT (= DTM1_OUT7_N) TOM1_7N GTM_TOUT (= DTM5_OUT7_N) IOM_MON0_10 IOM monitor input QSPI1_SLSO6 O2 QSPI1 output (aka: SLSO16) QSPI3_SLSO11 O3 QSPI3 output (aka: SLSO311) ASCLIN1_SLSO O4 ASCLIN1 output (aka: ASLSO1) GTM_CLK1 O5 GTM output SCU_EXTCLK1 O6 SCU output CCU61_COUT61 O7 CCU61 output IOM_MON1_12 IOM monitor input IOM_REF1_9 IOM reference input Table 2-46 Port 33 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-131 V 1.0 2017-09 67 P33.11 I A1 / HighZ / VDDP3 General-purpose input TIM0_2 GTM_TIN QSPI3_SCLKD QSPI3 input (aka: SCLK3D) SCU_REQ17 SCU input IOM_PIN11 IOM pad input P33.11 O0 General-purpose output TOM0_2 O1 GTM_TOUT TOM1_2 GTM_TOUT IOM_MON0_11 IOM monitor input ASCLIN1_SCLK O2 ASCLIN1 output (aka: ASCLK1) QSPI3_SCLK O3 QSPI3 output (aka: SCLK3) —O 4 Reserved —O 5 Reserved —O 6 Reserved CCU61_CC61 O7 CCU61 output IOM_MON1_9 IOM monitor input IOM_REF1_12 IOM reference input 68 P33.12 I A1 / HighZ / VDDP3 General-purpose input TIM0_0 GTM_TIN QSPI3_MTSRD QSPI3 input (aka: MTSR3D) IOM_PIN12 IOM pad input P33.12 O0 General-purpose output TOM1_12 O1 GTM_TOUT TOM0_12 GTM_TOUT IOM_MON0_12 IOM monitor input ASCLIN1_TX O2 ASCLIN1 output (aka: ATX1) IOM_MON2_13 IOM monitor input IOM_REF2_13 IOM reference input QSPI3_MTSR O3 QSPI3 output (aka: MTSR3) ASCLIN1_SCLK O4 ASCLIN1 output (aka: ASCLK1) —O 5 Reserved —O 6 Reserved CCU61_COUT60 O7 CCU61 output IOM_MON1_11 IOM monitor input IOM_REF1_10 IOM reference input Table 2-46 Port 33 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-132 V 1.0 2017-09 Table 2-47 Port 34 Functions Pin Symbol Ctrl. Buffer Type Function 52 P34.0 I A1 / HighZ / VDDP3 General-purpose input P34.0 O0 General-purpose output TOM1_12 O1 GTM_TOUT —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved 53 P34.1 I A1 / HighZ / VDDP3 General-purpose input P34.1 O0 General-purpose output TOM1_13 O1 GTM_TOUT ASCLIN0_TX O2 ASCLIN0 output (aka: ATX0) IOM_MON2_12 IOM monitor input IOM_REF2_12 IOM reference input —O 3 Reserved CAN0_TXD O4 CAN node 0 output (aka: TXDCAN0) IOM_MON2_5 IOM monitor input IOM_REF2_5 IOM reference input —O 5 Reserved —O 6 Reserved —O 7 Reserved 54 P34.2 I A1 / HighZ / VDDP3 General-purpose input ASCLIN0_RXD ASCLIN0 input (aka: ARX0D) CAN0_RXDG CAN node 0 input (aka: RXDCAN0G) P34.2 O0 General-purpose output TOM1_14 O1 GTM_TOUT —O 2 Reserved —O 3 Reserved —O 4 Reserved —O 5 Reserved —O 6 Reserved —O 7 Reserved

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-133 V 1.0 2017-09 55 P34.3 I A1 / HighZ / VDDP3 General-purpose input ASCLIN1_CTSB ASCLIN1 input (aka: ACTS1B) P34.3 O0 General-purpose output TOM1_15 O1 GTM_TOUT —O 2 Reserved —O 3 Reserved QSPI2_SLSO10 O4 QSPI2 output (aka: SLSO210) —O 5 Reserved —O 6 Reserved —O 7 Reserved Table 2-48 Port 40 Functions Pin Symbol Ctrl. Buffer Type Function 51 P40.0 I S / VDDM General-purpose input VADCG0_0 AI VADC input channel 0 of group 0 50 P40.1 I S / VDDM General-purpose input VADCG0_1 AI VADC input channel 1 of group 0 (with multiplexer diagnostics) 49 P40.2 I S / VDDM General-purpose input VADCG0_2 AI VADC input channel 2 of group 0 (with multiplexer diagnostics) 48 P40.3 I S / VDDM General-purpose input VADCG0_3 AI VADC input channel 3 of group 0 47 P40.4 I S / VDDM General-purpose input VADCG0_4 AI VADC input channel 4 of group 0 46 P40.5 I S / VDDM General-purpose input VADCG0_5 AI VADC input channel 5 of group 0 45 P40.6 I S / VDDM General-purpose input VADCG0_6 AI VADC input channel 6 of group 0 40 P40.7 I S / VDDM General-purpose input VADCG0_7 AI VADC input channel 7 of group 0 (with pull down diagnostics) 39 P40.8 I S / VDDM General-purpose input VADCG0_8 AI VADC input channel 8 of group 0 38 P40.9 I S / VDDM General-purpose input VADCG0_9 AI VADC input channel 9 of group 0 (with multiplexer diagnostics) Table 2-47 Port 34 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-134 V 1.0 2017-09 37 P40.10 I S / VDDM General-purpose input VADCG0_10 AI VADC input channel 10 of group 0 (with multiplexer diagnostics) 36 P40.11 I S / VDDM General-purpose input SENT_SENT0A SENT input CCU60_CCPOS0D CCU60 input VADCG0_11 AI VADC input channel 11 of group 0 Table 2-49 Port 41 Functions Pin Symbol Ctrl. Buffer Type Function 35 P41.0 I S / VDDM General-purpose input SENT_SENT1A SENT input CCU60_CCPOS1B CCU60 input VADCG1_0 AI VADC input channel 0 of group 1 34 P41.1 I S / VDDM General-purpose input VADCG1_1 AI VADC input channel 1 of group 1 (with multiplexer diagnostics) 33 P41.2 I S / VDDM General-purpose input SENT_SENT2A SENT input CCU61_CCPOS1B CCU61 input VADCG1_2 AI VADC input channel 2 of group 1 (with multiplexer diagnostics) 32 P41.3 I S / VDDM General-purpose input SENT_SENT3A SENT input CCU61_CCPOS1D CCU61 input VADCG1_3 AI VADC input channel 3 of group 1 (with pull down diagnostics) 31 P41.4 I S / VDDM General-purpose input VADCG1_4 AI VADC input channel 4 of group 1 30 P41.5 I S / VDDM General-purpose input VADCG1_5 AI VADC input channel 5 of group 1 29 P41.6 I S / VDDM General-purpose input VADCG1_6 AI VADC input channel 6 of group 1 28 P41.7 I S / VDDM General-purpose input VADCG1_7 AI VADC input channel 7 of group 1 27 P41.8 I S / VDDM General-purpose input VADCG1_8 AI VADC input channel 8 of group 1 Table 2-48 Port 40 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-135 V 1.0 2017-09 26 P41.9 I S / VDDM General-purpose input VADCG1_9 AI VADC input channel 9 of group 1 (with multiplexer diagnostics) 25 P41.10 I S / VDDM General-purpose input VADCG1_10 AI VADC input channel 10 of group 1 (with multiplexer diagnostics) 24 P41.11 I S / VDDM General-purpose input VADCG1_11 AI VADC input channel 11 of group 1 Table 2-50 System I/O Pin Symbol Ctrl. Buffer Type Function

81 XTAL1 I VDDP3 Main Oscillator/PLL/Clock Generator Input

82 XTAL2 O VDDP3 Main Oscillator/PLL/Clock Generator Output

89 TMS/DAP1 I A1+ / PD /

DAP1 I/O Device Access Port LIne 1

91 TRST I Input Only

/ PD / VDDP3 JTAG Module Reset/Enable Input

92 TCK/DAP0 I Input Only

/ PD / VDDP3 OCDS input DAP0 I Device Access Port LIne 0

97 PORST I Input Only

/ PD / VDDP3 Power On Reset Additional strong PD in case of power fail.

98 ESR0 I/O A1+ / OD /

Pin Symbol Ctrl. Buffer Type Function

41 V AGND I— Negative Analog Reference Voltage 0

42 V AREF I— Positive Analog Reference Voltage 0

126 V DDP3 I— Digital I/O Power Supply (3.3V) This pin supplies also the Flash 3.3V. 69 V DDP3 I— Digital I/O Power Supply (3.3V) Table 2-49 Port 41 Functions (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin Data Sheet 2-136 V 1.0 2017-09

2.3.2 Pull-Up/Pull-Down R eset Behavior of the Pins

79 V DD I— Digital Core Power Supply (1.3V) This pin supplies also the main XTAL Oscillator/PLL (1.3V). A higher decoupling capacitor is therefore recommended to the VSS pin for better noise immunity. 83 V DDP3 I— Digital I/O Power Supply (3.3V) This pin supplies also the main XTAL Oscillator/PLL (3.3V). A higher decoupling capacitor is therefore recommended to the VSS pin for better noise immunity. 44 V DDM I— ADC Power Supply (5.0V) 23 V DDP3 I— Digital I/O Power Supply (3.3V) 10 V DD I— Digital Core Power Supply (1.3V) 22 V DD I— Digital Core Power Supply (1.3V) 99 V DD I— Digital Core Power Supply (1.3V)

43 V SSM I— Analog Ground for VDDM

80 V SS I— Digital Ground

Table 2-52 List of Pull-Up/Pull-Down Reset Behavior of the Pins Pins PORST = 0 PORST = 1 all GPIOs High-Z TDI, TESTMODE Pull-up PORST1) 1) Pull-down with IPORST relevant is always activated when a primary supply monitor detects a violation. Pull-down with IPORST relevant Pull-down with IPDLI relevant TRST, TCK, TMS Pull-down ESR0 The open-drain driver is used to drive low.2) 2) Valid additionally after deactivation of PORST until the inter nal reset phase has finished. See the SCU chapter for details. Pull-up3) 3) See the SCU_IOCR register description. ESR1 Pull-up3) P14.2, P14.3, P14.6 Pull-up P21.7 / TDO Pull-up High-Z/Pull-up 4) 4) Depends on JTAG/DAP selection with TRST . Table 2-51 Supply (cont’d) Pin Symbol Ctrl. Buffer Type Function

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationParameter Interpretation Data Sheet 3-137 V 1.0 2017-09

3 Electrical Specification

3.1 Parameter Interpretation

The parameters listed in this section partly represent the characteristics of the TC212 / TC213 / TC214 / TC222 / TC223 / TC224 and partly its requir ements on the system. To aid interpreting the parameters easily when evaluating them for a design, they are marked with an two-letter abbreviation in column “Symbol”:

• CC Such parameters indicate Controller Characteristics which are a distinctive feature of the TC212 / TC213 / TC214 / TC222 / TC223 / TC224 and must be regarded for a system design.
• SR Such parameters indicate System Requirements which must provided by the microcontroller system in which the TC212 / TC213 / TC214 / TC222 / TC223 / TC224 designed in.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationAbsolute Maximum Ratings Data Sheet 3-138 V 1.0 2017-09

3.2 Absolute Maximum Ratings

Stresses above the values listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functi onal operation of the device at thes e or any other conditions above those indicated in the Operational Conditions of this specification is not implied. Exposure to absolute maximum rating conditions may affect device reliability. Table 3-1 Absolute Maximum Ratings Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Storage Temperature TST SR -65 - 170 °C upto 65h @ TJ = 150°C; upto 15h @ TJ = 170°C Voltage at VDD power supply pins with respect to VSS 1) 1) Valid for cumulated for up to 2.8h and pulse forms following a power supply switch on phase, where the rise and fall times are releated to the system capacities and coils. VDD S R --1 . 9 V Voltage at VDDP3 power supply pins with respect to VSS VDDP3 S R --4 . 4 3 V Voltage at VDDM power supply pin with respect to VSS VDDM S R --7 . 0 V Voltage on all analog and class S input pins with respect to VSS 2) Voltages below VINmin have no Impact to the device reliabiltiy as Long as the times and currents defined in section Pin Reliability in Overload for the affected pad(s) are not violated. VIN SR -0.5 - 7.0 V Voltage on all other input pins with respect to VSS 1)2) VIN SR -0.5 - min( VDDP3 + 0.6 , 4.23 V Whatever is lower Input current on any pin during overload condition 3) This parameter is an Absolute Maximum Rating. Exposure to Absolute Maximum Ratings for extended periods of time may damage the device. IIN SR -10 - 10 mA Absolute maximum sum of all input circuit currents during overload condition ΣIIN SR -100 - 100 mA

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationPin Reliability in Overload Data Sheet 3-139 V 1.0 2017-09

3.3 Pin Reliability in Overload

When receiving signals from higher voltage devices, low-voltage devices experience overload currents and voltages that go beyond their own IO power supplies specification. The following table defines overload conditions that will not cause any negative reliability impact if all the following conditions are met:

• full operation life-time is not exceeded
• Operating Conditions are met for – pad supply levels – temperature
• Parameters defined in Absolute Maximum Ratings are not violated If a pin current is out of the Operating Conditions but within the overload parameters, then the parameters functionality of this pin as stated in the Operating Conditions can no longer be guaranteed. Operation is still possible in most cases but with relaxed parameters. Note: An overload condition on one or more pins does not require a reset. Table 3-2 Overload Parameters Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Input current on any digital pin during overload condition IIN -5 - 5 mA Input current on analog input pin during overload condition IINANA -1 - 3 mA -5 - 5 mA limited to 60h over lifetime Absolute sum of all ADC inputs during overload condition IINSCA -20 - 20 mA Absolute maximum sum of all input circuit currents during overload condition ΣIINS -100 - 100 mA Inactive device pin current during overload condtion 1) IID -1 - 1 mA All power supply voltages VDDx = 0 Sum of all inactive device pin currents 1) IIDS -100 - 100 mA Overload coupling factor for digital inputs, negative 2) KOVDN C C --2 * 1 0 -3 Overload injected on GPIO pad and affecting neighbor GPIO pad Overload coupling factor for digital inputs, positive KOVDP C C --1 * 1 0 -5 Overload injected on GPIO pad and affecting neighbor GPIO pad Overload coupling factor for analog inputs, negative KOVAN C C --1 * 1 0 -3 Analog Inputs overlaid with pull down diagnostics --1 * 1 0 -4 else

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationPin Reliability in Overload Data Sheet 3-140 V 1.0 2017-09 Overload coupling factor for analog inputs, positive KOVAP C C --1 * 1 0 -4 Analog Inputs overlaid with pull down diagnostics --1 * 1 0 -5 else 1) Limitations for time and supply levels specified in this section are not valid for this parameter. 2) Overload is measured as increase of pad leakage caused by injection on neighbor pad. Table 3-3 PN-Junction Characteristics for positive Overload Pad Type IIN =3m A IIN =5m A A1 / A1+ UIN = VDDP3 +0 . 5V UIN = VDDP3 +0 . 6V D UIN = VDDM +0 . 7 5V - Table 3-4 PN-Junction Characteristics for negative Overload Pad Type IIN =- 3m A IIN =- 5m A A1 / A1+ UIN = VSS -0 . 5V UIN = VSS -0 . 6V D UIN = VSS -0 . 7 5V - Table 3-2 Overload Parameters (cont’d) Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationOperating Conditions Data Sheet 3-141 V 1.0 2017-09

3.4 Operating Conditions

The following operating conditions must not be exceeded in order to ensure correct operation and reliability of the TC212 / TC213 / TC214 / TC222 / TC223 / TC224. All parame ters specified in the following tables refer to these operating conditions, unless otherwise noticed. Digital supply voltages applied to the TC212 / TC213 / TC214 / TC222 / TC223 / TC224 must be static regulated voltages. All parameters specified in the following tables refer to these oper ating conditions (see table below), unless otherwise noticed in the Note / Test Condition column. Table 3-5 Operating Conditions Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. SRI frequency fSRI S R --1 3 3 M H z Max System Frequency fMAX S R --1 3 3 M H z CPU0 Frequency fCPU0 S R --1 3 3 M H z PLL output frequency fPLL SR 20 - 200 MHz SPB frequency fSPB S R --1 0 0 M H z ASCLIN fast frequency fASCLINF S R --1 3 3 M H z ASCLIN slow frequency fASCLINS S R --1 0 0 M H z Baud2 frequency fBAUD2 S R --1 3 3 M H z FSI2 frequency fFSI2 S R --1 3 3 M H z FSI frequency fFSI S R --1 0 0 M H z GTM frequency fGTM S R --1 0 0 M H z STM frequency fSTM S R --1 0 0 M H z MultiCAN frequency fCAN S R --1 0 0 M H z Absolute sum of short circuit currents of the device ΣISC_D S R --1 0 0 m A Ambient Temperature TA SR -40 - 125 °C valid for all SAK products -40 - 150 °C valid for all SAL products Junction Temperature TJ SR -40 - 150 °C valid for all SAK products -40 - 165 °C valid for all SAL products Core Supply Voltage 1) VDD SR 1.17 1.3 1.43 2) V Only required if externally supplied ADC analog supply voltage VDDM SR 2.97 5.0 5.5 3) V Digital ground voltage VSS SR 0 - - V Analog ground voltage for VDDM VSSM CC -0.1 0 0.1 V

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationOperating Conditions Data Sheet 3-142 V 1.0 2017-09 Voltage to ensure defined pad states 4) VDDPPA CC 0.72 - - V Digital supply voltage for GPIO pads and EVR 5) VDDP3 SR 2.97 3.3 3.63 V 1) No external inductive load permissible if EVR is used. All VDD pins shall be connected together externally on the PCB. 2) Voltage overshoot to 1.69V is permissi ble, provided the duration is less than 2h cumulated. Reduced ADC accuracy and leakage is increased. 3) Voltage overshoot to 6.5V is permissi ble, provided the duration is less than 2h cumulated. Reduced ADC accuracy and leakage is increased. 4) This parameter is valid under the assumption the PORST signal is constantly at low level during the power-up/power-down of VDDP3. 5) All VDDP3 pins shall be connected together externally on the PCB. Table 3-5 Operating Conditions (cont’d) Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical Specification3.3 V Pads Data Sheet 3-143 V 1.0 2017-09 3.5 3.3 V Pads Table 3-6 Standard_Pads Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Pin capacitance (digital inputs/outputs) CIO CC - 6 10 pF Spike filter always blocked pulse duration tSF1 CC - - 80 ns PORST only Spike filter pass-through pulse duration tSF2 CC 220 - - ns PORST only PORST pad output current 1) 1) Pull-down with IPORST relevant is always activated when a primary supply monitor detects a violation. IPORST CC 10.1 - - mA VDDP3 = 3.0V; VPORST = 0.9V; TJ = 150°C; Table 3-7 Class_A1 Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Input frequency fIN S R --1 0 0 M H z Input Hysteresis A1 HYSA1 CC 0.1 * VDDP3 --V Input Leakage Current Class IOZA1 CC -400 - 400 nA (0.1* VDDP3) < VIN < (0.9*VDDP3) -475 - 475 nA (0.1* VDDP3) < VIN < (0.9*VDDP3); only vaild for P0.0 -800 - 800 nA else Pull-down current class A1 pads IPDLA1 C C --| 1 2 0 | µ A VIHmin |15| - - µA VILmax Pull-up current class A1 pads IPUHA1 CC |15| - - µA VIHmin --| 1 2 0 | µ A VILmax On-Resistance of the A1 pad, medium driver RDSONA1M CC 50 125 200 Ohm IOH=2mA; IOL=2mA On-Resistance of the class A1 pad, weak driver RDSONA1W CC 250 500 800 Ohm IOH=0.5mA; IOL=0.5mA Input high voltage class A1 pads VIHA1 CC 0.7 * VDDP3 --V C M O S Input low voltage, class A1 pads VILA1 C C --0 . 3 * VDDP3 VC M O S

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical Specification3.3 V Pads Data Sheet 3-144 V 1.0 2017-09 Rise/fall time 1) tA1 CC - - 10+0.4 * CL ns CL≤100pF; pin out driver=medium - - 30+2.0 * CL ns CL≤100pF; pin out driver=weak 1) Rise / fall times are defined 10% - 90% of VDDP3. Table 3-8 Class_A1+ Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Input frequency fIN S R --7 5 M H z Input Leakage Current Class A1+ IOZA1+ CC -1 - 1 µA (0.1* VDDP3) < VIN < (0.9*VDDP3) -2 - 2 µA else Pull-down current class A1+ pads IPDLA1+ C C --| 1 2 0 | µ A VIHmin |15| - - µA VILmax Pull-up current class A1+ pads IPUHA1+ CC |15| - - µA VIHmin --| 1 2 0 | µ A VILmax On-Resistance of the A1+ pad, medium driver RDSONA1+M CC 50 125 200 Ohm IOH=2mA; IOL=2mA On-Resistance of the A1+ pad, strong driver RDSONA1+S CC 10 40 65 Ohm IOH=6mA; IOL=6mA On-Resistance of the A1+ pad, weak driver RDSONA1+W CC 250 500 800 Ohm IOH=0.5mA; IOL=0.5mA Input high voltage, Class A1+ pads VIHA1+ CC 0.7 * VDDP3 --V C M O S Input low voltage Class A1+ pads VILA1+ C C --0 . 3 * VDDP3 VC M O S Rise/fall time 1) 1) Rise / fall times are defined 10% - 90% of VDDP3. tA1+ C C --8 + 0 . 1 4 * CL ns CL≤100pF; edge=slow ; pin out driver=strong (sw) --1 + 0 . 1 4 * CL ns CL≤100pF; edge=soft ; pin out driver=strong (sf) - - 10+0.4 * CL ns CL≤100pF; pin out driver=medium - - 30+2.0 * CL ns CL≤100pF; pin out driver=weak Input Hysteresis A1+ HYSA1+ CC 0.1 * VDDP3 --V Table 3-7 Class_A1 (cont’d) Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical Specification3.3 V Pads Data Sheet 3-145 V 1.0 2017-09 Table 3-9 Class_S Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Input frequency fIN S R --7 5 M H z Input Hysteresis for S pad 1) 1) Hysteresis is implemented to avoid me tastable states and switching due to internal ground bounce. It can't be guaranteed that it suppresses switching due to external system noise. HYSS CC 0.3 - - V Pull-up current for S pad IPUHS CC |11| - - µA VIHmin --| 1 2 0 | µ A VILmax Pull-down current for S pad IPDLS C C --| 1 2 0 | µ A VIHmin |30| - - µA VILmax Input Leakage current Class S IOZS CC -350 - 350 nA Analog Inputs overlaid with pull down diagnosis -150 - 150 nA else Input voltage high for S pad VIHS S R --3 . 8 2) 2) VILx = 0.65 * VDDM V Input voltage low for S pad VILS SR 1.39 3) 3) VILx = 0.41 * VDDM --V Input low threshold variation for S pad 4) 4) VILSD is implemented to ensure J2716 specification. For details of dedicated pins please see AP32286 for details. VILSD SR -50 - 50 mV max. variation of 1ms; VDDM=constant Input capacitance for S pad CINS C C --1 0 p F Pad set-up time for S pad tSETS C C --1 0 0 n s Table 3-10 Class I Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Input frequency fIN S R --1 0 0 M H z Input Hysteresis for I pad 1) HYSI CC 0.1 * VDDP3 --V Pull-up current for I pad IPUHI CC |15| - - µA VIHImin --| 1 2 0 | µ A VILImax Pull-down current for I pad IPDLI C C --| 1 2 0 | µ A VIHImin |15| - - µA VILImax Input Leakage Current for I pad IOZI CC -150 - 150 nA (0.1* VDDP3) < VIN < (0.9*VDDP3) -500 - 350 nA else Input high voltage for I pad VIHI SR 0.7 * VDDP3 --V C M O S

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical Specification3.3 V Pads Data Sheet 3-146 V 1.0 2017-09 Input low voltage for I pad VILI S R --0 . 3 * VDDP3 VC M O S Pad set-up time for I pad tSETI C C --1 0 0 n s 1) Hysteresis is implemented to avoid me tastable states and switching due to internal ground bounce. It can't be guaranteed that it suppresses switching due to external system noise. Table 3-11 Driver Mode Selection for A1 Pads PDx.2 PDx.1 PDx.0 Port Functionality Driver Setting X X 0 Speed grade 1 medium (A1m) X X 1 Speed grade 2 weak (A1w) Table 3-12 Driver Mode Selection for A1+ Pads PDx.2 PDx.1 PDx.0 Port Functionality Driver Setting X 0 0 Speed grade 1 Strong soft edge (A1+sf) X 0 1 Speed grade 2 Strong slow edge (A1+sw) X 1 0 Speed grade 3 medium (A1+m) X 1 1 Speed grade 4 weak (A1+w) Table 3-10 Class I (cont’d) Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationVADC Parameters Data Sheet 3-147 V 1.0 2017-09

3.6 VADC Parameters

VADC parameter are valid for VDDM = 4.5 V to 5.5 V. This table also covers the parameters for Class D pads. Table 3-13 VADC Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Analog reference voltage 1) VAREF SR VAGND + 1.0 - VDDM + 0.05 V Analog reference ground VAGND SR VSSM - 0.05 - VSSM + 0.05 V Analog input voltage range VAIN SR VAGND - VAREF V Converter reference clock fADCI SR 2 - 20 MHz Charge consumption per conversion 2) 3) QCONV CC - 50 75 pC VAIN = 5 V, charge consumed from reference pin, precharging disabled -1 0 2 2 p C VAIN = 5 V, charge consumed from reference pin, precharging enabled Conversion time for 12-bit result tC12 CC - (16 + STC) x tADCI + 2 x tVADC - Includes sample time and post calibration Conversion time for 10-bit result tC10 CC - (14 + STC) x tADCI + 2 x tVADC - Includes sample time Conversion time for 8-bit result tC8 CC - (12 + STC) x tADCI + 2 x tVADC - Includes sample time Conversion time for fast compare mode tCF CC - (4 + STC) x tADCI + 2 x tVADC - Includes sample time Broken wire detection delay against VAGND 4) tBWG CC - - 120 cycles Result below 10% Broken wire detection delay against VAREF 5) tBWR CC - - 60 cycles Result above 80% Input leakage at analog inputs IOZ1 CC -350 - 350 nA Analog Inputs overlaid with pull down diagnosis -150 - 150 nA else Total Unadjusted Error 1) TUE CC -4 6) -4 6) LSB 12-bit resolution

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationVADC Parameters Data Sheet 3-148 V 1.0 2017-09 INL Error EAINL CC -3 - 3 LSB 12-bit resolution Gain Error 1) EAGAIN CC -3.5 - 3.5 LSB 12-bit resolution DNL error 1) EADNL CC -3 - 3 LSB 12-bit resolution Offset Error 1) EAOFF CC -4 - 4 LSB 12-bit resolution Total capacitance of an analog input CAINT C C --3 0 p F Switched capacitance of an analog input CAINS CC 2 - 7 pF Resistance of the analog input path RAIN C C --1 . 5 k O h m - - 1.8 kOhm valid for analog inputs mapped to GPIOs Switched capacitance of a reference input CAREFS C C --3 0 p F RMS Noise 7) ENRMS CC - 0.5 0.8 6)8) LSB Positive reference VAREFx pin leakage IOZ2 CC -2 - 2 µA VAREFx = VAREF; TJ>150°C -1 - 1 µA VAREFx = VAREF; TJ≤150°C Negative reference VAGNDx pin leakage IOZ3 CC -2.5 - 2.5 µA VAGNDx = VAGND; TJ>150°C -1.5 - 1.5 µA VAGNDx = VAGND; TJ≤150°C Resistance of the reference input path RAREF C C --1 k O h m CSD resistance 9) RCSD C C --2 8 k O h m Resistance of the multiplexer diagnostics pull-down device RMDD CC 25 + 1* VIN -3 5 - 8 * VIN kOhm 0 V ≤ VIN ≤ 2.5 V -5 + 13*VIN -1 5 + 16*VIN kOhm 2.5 V ≤ VIN ≤ VDDM Resistance of the multiplexer diagnostics pull-up device RMDU CC 45 - 6* VIN -9 0 - 16*VIN kOhm 0 V ≥ VIN ≤ 2.5 V 40 - 4*VIN -6 5 - 6 * VIN kOhm 2.5 V ≤ VIN ≤ VDDM Resistance of the pull-down test device 10) RPDD C C --0 . 3 k O h m CSD voltage accuracy 11) 12) dVCSD C C --1 0 % Wakeup time tWU C C --1 2 µ s 1) If the reference voltage is reduced by the factor k (k < 1), TUE,DNL,INL,Gain, and Offset errors increase also by the factor 1/k. VAREF must be decoupled with an external capacitor. 2) For QCONV = X pC and a conversion time of 1 µs a rms value of X µA results for IAREFx. 3) For the details of the mapping for a VADC group to pin VAREFx please see the User's Manual. 4) The broken wire detection delay against VAGND is measured in numbers of consecutive precharge cycles at a conversion rate higher than 1 conversion per 500 ms. Table 3-13 VADC (cont’d) Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationVADC Parameters Data Sheet 3-149 V 1.0 2017-09 VADC parameter are valid for VDDM =2 . 9 7V t o 4 . 5V . 5) The broken wire detection delay against VAREF is measured in numbers of consecutive precharge cycles at a conversion rate higher than 1 conversion per 10 ms. This function is influenced by leakage current, in particular at high temperature. 6) Resulting worst case combined error is arithmetic combination of TUE and ENRMS. 7) This parameter is valid for soldered devic es and requires careful analog board design. 8) Value is defined for one sigma Gauss distribution. 9) In order to avoid an additional error due to incomplete sampling, the sampling time shall be set greater than 5 * RCSD * CAINS. 10) The pull-down resistor RPDD is connected between the input pad and the analog multiplexer. The input pad itself adds another 200-Ohm series resistance, when measuring through the pin. 11) CSD: Converter Self Diagnostics, for details please consult the User's Manual. 12) Note, that in case CSD voltage is chosen to nom. 1/3 or 2/3 of VAREF voltage, the reference voltage is loaded with a current of max. VAREF / 45 kOhm. Table 3-14 VADC_33 Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Analog reference voltage 1) VAREF SR VAGND + 1.0 - VDDM + 0.05 V Analog reference ground VAGND SR VSSM - 0.05 - VSSM + 0.05 V Analog input voltage range VAIN SR VAGND - VAREF V Converter reference clock fADCI SR 2 - 20 MHz Charge consumption per conversion 2) 3) QCONV CC - 35 50 pC VAIN = 3.3 V, charge consumed from reference pin, precharging disabled - 8 17 pC VAIN = 3.3 V, charge consumed from reference pin, precharging enabled Conversion time for 12-bit result tC12 CC - (16 + STC) x tADCI + 2 x tVADC - Includes sample time and post calibration Conversion time for 10-bit result tC10 CC - (14 + STC) x tADCI + 2 x tVADC - Includes sample time Conversion time for 8-bit result tC8 CC - (12 + STC) x tADCI + 2 x tVADC - Includes sample time Conversion time for fast compare mode tCF CC - (4 + STC) x tADCI + 2 x tVADC - Includes sample time Broken wire detection delay against VAGND 4) tBWG CC - - 120 cycles Result below 10%

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationVADC Parameters Data Sheet 3-150 V 1.0 2017-09 Broken wire detection delay against VAREF 5) tBWR CC - - 60 cycles Result above 80% Input leakage at analog inputs IOZ1 CC -350 - 350 nA Analog Inputs overlaid with pull down diagnostics -150 - 150 nA else Total Unadjusted Error 1) TUE CC -12 - 12 LSB 12-bit Resolution; TJ > 150 °C -6 - 6 LSB 12-bit Resolution; TJ ≤ 150 °C INL Error EAINL CC -12 - 12 LSB 12-bit Resolution; TJ > 150 °C -5 - 5 LSB 12-bit Resolution; TJ ≤ 150 °C Gain Error 1) EAGAIN CC -6 - 6 LSB 12-bit Resolution; TJ > 150 °C -5.5 - 5.5 LSB 12-bit Resolution; TJ ≤ 150 °C DNL error 1) EADNL CC -4 - 4 LSB 12-bit resolution Offset Error 1) EAOFF CC -6 - 6 LSB 12-bit Resolution; TJ > 150 °C -5 - 5 LSB 12-bit Resolution; TJ ≤ 150 °C Total capacitance of an analog input CAINT C C --3 0 p F Switched capacitance of an analog input CAINS CC 2 4 7 pF Resistance of the analog input path RAIN C C --4 . 5 k O h m Switched capacitance of a reference input CAREFS C C --3 0 p F RMS Noise 6) ENRMS C C --1 . 7 L S B Positive reference VAREFx pin leakage IOZ2 CC -2 - 2 µA VAREFx = VAREF; TJ>150°C -1 - 1 µA VAREFx = VAREF; TJ≤150°C Negative reference VAGNDx pin leakage IOZ3 CC -2.5 - 2.5 µA VAGNDx = VAGND; TJ>150°C -1 - 1 µA VAGNDx = VAGND; TJ≤150°C Resistance of the reference input path RAREF C C --3 k O h m Table 3-14 VADC_33 (cont’d) Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationVADC Parameters Data Sheet 3-151 V 1.0 2017-09 Figure 3-1 Equivalent Circuitry for Analog Inputs CSD resistance 7) RCSD C C --2 8 k O h m Resistance of the multiplexer diagnostics pull-down device RMDD CC 25 + 3* VIN -4 0 + 12*VIN kOhm 0 V ≤ VIN ≤ 1.667 V 0 + 18*VIN -0 + 1 8 * VIN kOhm 1.667 V ≤ VIN ≤ VDDM Resistance of the multiplexer diagnostics pull-up device RMDU CC 60 - 12*VIN -1 2 0 - 30*VIN kOhm 0 V ≤ VIN ≤ 1.667 V 55 - 9*VIN -9 5 - 15*VIN kOhm 1.667 V ≤ VIN ≤ VDDM Resistance of the pull-down test device 8) RPDD C C --0 . 9 k O h m CSD voltage accuracy 9) 10) dVCSD C C --1 0 % Wakeup time tWU C C --1 2 µ s 1) If the reference voltage is reduced by the factor k (k < 1), TUE,DNL,INL,Gain, and Offset errors increase also by the factor 1/k. VAREF must be decoupled with an external capacitor. 2) For QCONV = X pC and a conversion time of 1 µs a rms value of X µA results for IAREFx. 3) For the details of the mapping for a VADC group to pin VAREFx please see the User's Manual. 4) The broken wire detection delay against VAGND is measured in numbers of consecutive precharge cycles at a conversion rate higher than 1 conversion per 500 ms. 5) The broken wire detection delay against VAREF is measured in numbers of consecutive precharge cycles at a conversion rate higher than 1 conversion per 10 ms. This function is influenced by leakage current, in particular at high temperature. 6) This parameter is valid for soldered devic es and requires careful analog board design. 7) In order to avoid an additional error due to incomplete sampling, the sampling time shall be set greater than 5 * RCSD * CAINS. 8) The pull-down resistor RPDD is connected between the input pad and the analog multiplexer. The input pad itself adds another 200-Ohm series resistance, when measuring through the pin. 9) CSD: Converter Self Diagnostics, for de tails please consult the User's Manual. 10) Note, that in case CSD voltage is chosen to nom. 1/3 or 2/3 of VAREF voltage, the reference voltage is loaded with a current of max. VAREF / 45 kOhm. Table 3-14 VADC_33 (cont’d) Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. A/D Converter MCS05570 RSource VAIN CExt CAINT CAINS- RAIN, On CAINS

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationMHz Oscillator Data Sheet 3-152 V 1.0 2017-09

3.7 MHz Oscillator

OSC_XTAL is used as accurate and exact clock source. OSC_XTAL supports 8 MHz to 40 MHz crystals external outside of the device. Support of ceramic resonators is also provided. Note: It is strongly recommended to measure the oscillation allowance (negative resistance) in the final target system (layout) to determine the optimal parameters for the oscillator operation. Please refer to the limits specified by the crystal or ceramic resonator supplier. Table 3-15 OSC_XTAL Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Input current at XTAL1 IIX1 CC -25 - 25 µA VIN>0V; VIN<VDDP3V Oscillator frequency fOSC SR 4 - 40 MHz Direct Input Mode selected 8 - 40 MHz External Crystal Mode selected Oscillator start-up time 1) 1) tOSCS is defined from the moment when VDDP3 = 3.13V until the oscillations reach an amplitude at XTAL1 of 0.3 * VDDP3. The external oscillator circuitry must be optimized by the customer and checked for negative resistance as recommended and specified by crystal suppliers. tOSCS C C --5 2) 2) This value depends on the frequency of the used external crystal. For faster crystal frequencies this value decrease. ms Input high voltage at XTAL1 VIHBX SR 0.8 - VDDP3 + 0.5 V If shaper is bypassed Input low voltage at XTAL1 VILBX SR -0.5 - 0.4 V If shaper is bypassed Input voltage at XTAL1 VIX SR -0.5 - VDDP3 + 0.5 V If shaper is not bypassed Input amplitude (peak to peak) at XTAL1 VPPX SR 0.3 * VDDP3 - VDDP3 + 1.0 V If shaper is not bypassed; fOSC > 25MHz 0.4 * VDDP3 - VDDP3 + 1.0 V If shaper is not bypassed; fOSC ≤ 25MHz

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationBack-up Clock Data Sheet 3-153 V 1.0 2017-09

3.8 Back-up Clock

The back-up clock provides an alternative clock source. Table 3-16 Back-up Clock Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Back-up clock before trimming fBACKUT CC 75 100 125 MHz Slow speed Back-up clock fBACKSS CC 75 100 125 kHz Back-up clock after trimming fBACKT CC 97.5 100 102.5 MHz

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationTemperature Sensor Data Sheet 3-154 V 1.0 2017-09

3.9 Temperature Sensor

The following formula calculates the temperature measured by the DTS in [ oC] from the RESULT bit field of the DTSSTAT register. (3.1) Table 3-17 DTS Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Measurement time tM C C --1 0 0 µ s Calibration reference accuracy TCALACC CC -1 - 1 °C calibration points @ TJ=-40°C and TJ=127°C Non-linearity accuracy over temperature range TNL CC -2 - 2 °C Temperature sensor range TSR SR -40 - 170 °C Start-up time after resets inactive tTSST S R --2 0 µ s Tj DTSSTATRESULT 607()–

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationPower Supply Current Data Sheet 3-155 V 1.0 2017-09

3.10 Power Supply Current

The total power supply current defined below consists of leakage and switching component. Application relevant values are typically lower than those given in the following table and depend on the customer's system operating conditions (e.g. thermal connection or used application configurations). The operating conditions for the parameters in the following table are: The real (realisic) power pattern defines the following conditions:

• TJ = 150 °C
• fSRI = fMAX = fCPU0 =2 0 0M H z
• fSPB = fSTM = fGTM = fBAUD1 = fBAUD2 = fASCLIN =4 0 M H z
• VDD =1 . 3 2 6V
• VDDP3 =3 . 3 6 6V
• VDDM =5 . 1V
• core is active
• the following peripherals are i nactive: HSM, Ethernet, and MTU The max power pattern defines the following conditions: TJ = 150 °C
• fSRI = fMAX = fCPU0 =2 0 0M H z
• fSPB = fSTM = fGTM = fBAUD1 = fBAUD2 = fASCLIN = 100 MHz
• VDD =1 . 4 3V
• VDDP3 =3 . 6 3V
• VDDM =5 . 5V
• core is active
• all peripherals are active Table 3-18 Power Supply Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. ∑ Sum of IDD 1.3 V core and peripheral supply currents IDD CC - - 99 mA max power pattern - - 75 mA real power pattern IDD core current during active power-on reset (PORST held low) IDDPORST CC --1 5 m A TJ=125°C --2 6 m A TJ=150°C --4 4 m A TJ=165°C IDD core current of CPU0 lockstep core active IDDC01 CC - - 20 mA real power pattern ∑ Sum of 3.3 V supply currents without pad activity IDDx3RAIL C C --3 6 1) mA real power pattern; incl. OSC, EVR and Pflash programming current. - - 38 mA real power pattern; incl. OSC, EVR and Pflash rerad current.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationPower Supply Current Data Sheet 3-156 V 1.0 2017-09 3.10.1 Calculating the 1.3 V Current Consumption The current consumption of the 1.3 V rail compose out of two parts:

• Static curren t consumption
• Dynamic current consumption The static current consumption is re lated to the device temperature T J and the dynamic current consumption depends of the configured clocking frequencies and the software application executed. These two parts needs to be added in order to get the rail current consumption. (3.2) (3.3) Function 2 defines the typical static current consumpt ion and Function 3 defines the maximum static current consumption. Both functions are valid for VDD =1 . 3 2 6V . IDDM supply current IDDM CC - - 6 mA max pattern; current for VADC only ∑ Sum of all currents (incl. IDDP3RAIL+IDD+IDDM) IDDTOTL CC - - 117 mA real power pattern ∑ Sum of all currents (STANDBY mode) IEVRSB C C --1 5 0 2) µA Standby RAM is active. Power to remaining domains switched off. TJ = 25°C; VEVRSB = 5V ∑ Sum of all currents (SLEEP mode) ISLEEP CC - - 10 mA CPU is in idle, All peripherals in sleep, fSRI/SPB = 1 MHz; TJ = 55°C Maximum power dissipation PD C C --3 7 0 3) mW max power pattern --2 9 0 3) mW real power pattern 1) Realistic Pflash read pattern with 50% Pflash bandwidth utlil ization and a code mix of 50% 0s and 50% 1s. Dynamic Flash Idle via FCON.IDLE is activated bringing a benefit of 4 mA. A decoupling capacitor of atleast 100nF is used. Dflash read current is also included. 2) The current during STANDBY mode is drawn at VDDP3 supply pin. During RUN-STANDBY mode transition the current drawn at VDDP3 supply pin is less than 6mA. 3) SC DC DC losses is included in the power consumption estimate. Table 3-18 Power Supply (cont’d) Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. I0 0 0228 mA I0 0 868 mA

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationPower-up and Power-down Data Sheet 3-157 V 1.0 2017-09

3.11 Power-up a nd Power-down

Figure 3-2 Single Supply mode - 3.3 V single supply EVR13 Ramp-up Phase 0 3 Firmware ExecutionBasic Supply & Clock Infrastructure User Code Execution 0 V 1.30 V VDD (internally generated by EVR13)

1.17 V Primary Reset Threshold

1.33 V Power Ramp-down phase fCPU=100 MHz default on firmware exit Startup _Diag_ 4 v 0 .1 PORST (output ) PORST (input ) 0 V 3.30 V 3.63 V 2.97 V Primary Reset Threshold VDDP3 (externally supplied )

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationPower-up and Power-down Data Sheet 3-158 V 1.0 2017-09

3.11.1 Single Supply mode

3.3 V single supply mode. 1.3 V is generated internally by the EVR13 regulator.

• The rate at which current is drawn from the extern al regulator (dIEXT /dt) is limited during the basic infrastructure and EVR13 regulator start-up phase (T0 upto T2) to a maximum of 100 mA/100 us. EVR13 is also robust against a voltage ramp-up starting from a residual voltage between 0 - 1 V. Start-up slew rates for supply rails should comply to datasheet values.
• Furthermore it is also ensured that the current drawn fr om the external regulator (dIEXT /dt) is limited during the Firmware start-up phase (T2 upto T3) to a maximum of 100 mA/100 us.
• PORST is active/ asserted when either PORST (input) or PORST (output) is active/ asserted.
• PORST (input) active means that the reset is held active by external agents by pulling the PORST pin low. It is recommended to keep the PORST (input) asserted until the external supply is above the respective primary reset threshold.
• PORST (output) active means that µC asserts the re set internally and drives the PORST pin low thus propagating the reset to external devices. The PORST (output) is asserted by the µC when atleast one among the two supply domains (1.3 V or 3.3 V) violate their primary under-voltage reset thresholds.The PORST (output) is deasserted by the µC when all supplies are above their primary reset thresholds and the basic supply and clock infrastructure is available.
• The power sequence as shown in Figure 3-2 is enumerated below – T1 refers to the point in time when basic supply and cl ock infrastructure is available as the external supply ramps up. The supply mode is evaluated based on the HWCFG[0,2] pins and consequently a soft start of EVR13 regulator is initiated. – T2 refers to the point in time when all supplies are above their primary reset thresholds. EVR13 regulator has ramped up. PORST (output) is deasserted and HWCFG[3:5] pins are latched on PORST rising edge. Firmware execution is initiated. – T3 refers to the point in time when Firmware execution is completed. User code execution starts with a default frequency of 100 MHz. – T4 refers to the point in time du ring the Ramp-down phase when atleast one of the externally provided or generated supplies (1.3 V or 3.3 V) drop below their respective primary under-voltage reset thresholds.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationPower-up and Power-down Data Sheet 3-159 V 1.0 2017-09 Figure 3-3 External Supply mode - 3.3 V and 1.3 V external supply VDDP3 (externally supplied ) 1 20 0 V 1.3 0 V VDD (externally supplied) 1.1 7 V Primary Reset Threshold 1.3 3 V T0 T2 Firmware ExecutionBasic Supply & Clock Infrastructure User Code Execution Power Ramp -down phase fCP U=100 MHz default on firmware exit Startup_ Diag_5 v 0. 1 PORST (output ) PORST (input ) 0 V 3.30 V 3.63 V 2.97 V Primary Reset Threshold

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationPower-up and Power-down Data Sheet 3-160 V 1.0 2017-09

3.11.2 External Supply mode

All supplies, namely 3.3 V & 1.3 V, are externally supplied.

• External supplies VDDP3 & VDD may ramp-up or ramp-down independent of each other with regards to start, rise and fall time(s). The supply system is also robust against a voltage ramp-up starting from a residual voltage between 0 - 1 V. Start-up slew rates for supply rails should comply to datasheet values.
• The rate at which current is drawn from the external re gulator (dIEXT /dt, dIDD /dt) is limited in the Start-up phase to a maximum of 50 mA/100 us.
• PORST is active/ asserted when either PORST (input) or PORST (output) is active/ asserted.
• PORST (input) active means that the reset is held active by external agents by pulling the PORST pin low. It is recommended to keep the PORST (input) asserted until all the external supplies are above their primary reset thresholds.
• PORST (output) active means that µC asserts the re set internally and drives the PORST pin low thus propagating the reset to external devices. The PORST (output) is asserted by the µC when atleast one among the two supply domains (1.3 V or 3.3 V) violate their primary under-voltage reset thresholds.The PORST (output) is deasserted by the µC when all supplies are above their primary reset thresholds and the basic supply and clock infrastructure is available.
• The power sequence as shown in Figure 3-3 is enumerated below – T1 refers to the point in time when all supplies are above their primary reset thresholds and basic clock infrastructure is available. The supply mode is evaluated based on the HWCFG[0,2] pins. PORST (output) is deasserted and HWCFG[3:5] pins are latched on PORST rising edge. Firmware execution is initiated. – T2 refers to the point in time when Firmware execution is completed. User code execution starts with a default frequency of 100 MHz. – T3 refers to the po int in time during the Ramp-down phase when atleast one of the externally provided supplies (1.3 V or 3.3 V) drop below their respective primary under-voltage reset thresholds.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationReset Timing Data Sheet 3-161 V 1.0 2017-09

3.12 Reset Timing

Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Application Reset Boot Time 1) 1) The duration of the boot time is defined between the rising edge of the internal application reset and the clock cycle when the first user instruction has entered the CPU pipeline and its processing starts. tB CC - - 350 µs operating with max. frequencies System Reset Boot Time tBS C C --1 m s Power on Reset Boot Time 2) 2) The duration of the boot time is defined by all external supply voltages are inside there operation condictions and the clock cycle when the first user instruction has entered the CPU pipeline and its processing starts. tBP C C --2 . 5 m s dV/dT=1V/ms. including EVR ramp- up and Firmware execution time - - 1.1 ms Firmware execution time; without EVR operation (external supply only) EVR start-up or ramp-up time tEVRstartup CC --1 m s dV/dT=1V/ms Minimum PORST active hold time after power supplies are stable at operating levels 3) 3) The regulator that supplies VEXT should ensure that VEXT is in the operational region before PORST is externally released by the regulator. Incase of 5V nominal supply, it should be ensured that VEXT > 4V before PORST is released. Incase of 3.3V nominal supply , it should be ensured that VEXT > 3V before PORST is released. The additional minimum PORST hold time is required as an additional mechanism to avoid consecutive PORST toggling owing to slow supply slopes or residual supply ramp-ups. It is also required to activate external PORST atleast 100us before power-fail is recognised to avoid consecutive PORST toggling on a power fail event. tPOA CC 1 - - ms HWCFG pins hold time from ESR0 rising edge tHDH CC 16 / fSPB --n s HWCFG pins setup time to ESR0 rising edge tHDS CC 0 - - ns Ports inactive after ESR0 reset active tPI C C --8 / fSPB ns Ports inactive after PORST reset active 4) 4) This parameter includes the delay of the analog spike filter in the PORST pad. tPIP C C --1 5 0 n s Hold time from PORST rising edge tPOH SR 150 - - ns Setup time to PORST rising edge tPOS SR 0 - - ns

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationReset Timing Data Sheet 3-162 V 1.0 2017-09 Figure 3-4 Power, Pad and Reset Timing reset_beh_aurix VDDP PORST Pads Pad- state undefined VDD VDDPP A VDDPPA Pad- state undefined VDDPR Programmed Z / HTristate Z / pullup H tPOA tPOA HWCFG ESR 0 tPI P Z / H Cold Warm tHDH TESTMODE tPO S tPOH tPOS tPOHTRST t PI Programmed Programmed tPI power -on config tHDA tHDH config tHDA tHDH config

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationEVR Data Sheet 3-163 V 1.0 2017-09

3.13 EVR

Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Input voltage range 1) 1) A maximum pass device dropout voltage of 700mV is included in the minimum input voltage to ensure optimal pass device operation. VIN SR 2.97 - 3.63 V VIN≥; pass device=on chip Output voltage operational range including load/line regulation and aging incase of LDO regulator VOUT CC 1.17 1.3 1.43 V VIN≥; pass device=on chip Output VDD static voltage accuracy after trimming without dynamic load/line regulation with aging incase of LDO regulator. VOUTT CC 1.275 1.3 1.325 V load equal to IDD of max power pattern; VIN≥; pass device=on chip Output buffer capacitance on VOUT 2) 2) It is recommended to select a capacitor with ESR less than 50 mOhm (0.5MHz - 10 MHz). It is also recommended that the resistance of the supply trace from the pin to the EVR output capacitor is less than 100 mOhm. COUT CC 1.4 2.2 3 µF On chip pass device usage restricted to IDD < 150mA.; VIN≥; pass device=on chip Primary undervoltage reset threshold for VDD 3) 3) The reset release on supply ramp-up is delayed by a time dur ation 30-60 µs after reaching undervoltage reset threshold. This serves as a time hysteresis to avoid multiple consecutive cold PORST events during slow supply ramp-ups owing to voltage drop/current jumps when reset is released.The reset limit of 1,17V at pin is for the case with 1.3V generated internally from EVR13. In case the 1.3V supply is provided externally, the bondwire drop will cause a reset at a higher voltage of 1.18V at the VDD pin. VRST13 C C --1 . 1 7 4) 4) In TQFP-80 and TQFP-100 pin package, only VDDPRIUV is tested instead of VRST13 as HWCFG2 pin is absent. V VIN≥; pass device=on chip Startup time tSTR CC - - 1000 µs VIN≥; pass device=on chip External VIN supply ramp 5) 5) EVR robust against residual voltage ramp-up starting between 0-1 V. dVin/dT SR -1 5 0 V / m s VIN≥; pass device=on chip Load step response dVout/dIout CC --1 0 0 m V dI=-100mA; Tsettle=20µs; VIN≥; pass device=on chip -100 - - mV dI=75mA; Tsettle=20µs; VIN≥; pass device=on chip Line step response dVout/dVin CC -10 - 10 mV dV/dT=1V/ms; VIN≥; pass device=on chip

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationEVR Data Sheet 3-164 V 1.0 2017-09 Table 3-21 Supply Monitoring Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. VDDP3 primary undervoltage monitor accuracy after trimming 1) 1) The monitor tolerances constitute the inherent variation of the bandgap and ADC over process, voltage and temperature operational ranges. The xxxPRIUV parameters are device individually tested in production with ±1% tolerance about the min and max xxxPRIUV limits. In TQFP100 and QFP80 pin packages, VDDPRIUV is not tested as HWCFG2 pin is absent. VDDP3PRIUV SR 2.86 2.92 2.97 V VDD primary undervoltage monitor accuracy after trimming VDDPRIUV SR 1.13 1.15 1.17 V VDDP3 secondary supply monitor accuracy VDDP3MON CC 3.23 3.30 3.37 V SWDxxVAL VDDP3 monitoring threshold=3.3V=91h VDD secondary supply monitor accuracy VDDMON CC 1.27 1.30 1.33 V EVR13xxVAL VDD monitoring threshold=1.3V=E3h EVR primary and secondary monitor measurement latency for a new supply value tEVRMON CC - - 1.8 µs after trimming

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationPhase Locked Loop (PLL) Data Sheet 3-165 V 1.0 2017-09

3.14 Phase Locked Loop (PLL)

Note: The specified PLL jitter values are valid if the capacitive load per pin does not exceed CL = 20 pF with the maximum driver and soft edge (speed grade 1). Note: The maximum peak-to-peak noise on the power supply voltage, is limited to a peak-to-peak voltage of VPP = 100 mV for noise frequencies below 300 KHz and VPP = 40 mV for noise frequencies above 300 KHz. These conditions can be achieved by appropriate blocking of the supply voltage as near as possible to the supply pins and using PCB supply and ground planes. Table 3-22 PLL Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. PLL base frequency fPLLBASE CC 80 150 360 MHz VCO frequency range fVCO SR 400 - 800 MHz VCO Input frequency range fREF CC 8 - 24 MHz Modulation Amplitude MA CC 0 - 2 % Peak Period jitter DP CC -200 - 200 ps Peak Accumulated Jitter DPP CC -5 - 5 ns without modulation Total long term jitter JTOT CC - - 12.2 ns including modulation; MA ≤ 1% - - 11.5 ns including modulation; MA≤0.9% System frequency deviation fSYSD CC - - 0.01 % with active modulation Modulation variation frequency fMV CC 2 3.6 5.4 MHz PLL lock-in time tL CC 11.5 - 200 µs

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationAC Specifications Data Sheet 3-166 V 1.0 2017-09

3.15 AC Specifications

All AC parameters are specified for the complette operating range defined in Chapter 3.4 unless otherwise noted in colum Note / test Condition. Unless otherwise noted in the figures the timings are defined with the following guidelines: Figure 3-5 Definition of rise / fall times Figure 3-6 Time Reference Point Definition 10% 90% 10% 90% VSS VDDP 3 tr rise_fall tf timing _reference VDDP 3 Timing Reference Points VDDP3 VSS VDDP 3

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationJTAG Parameters Data Sheet 3-167 V 1.0 2017-09

3.16 JTAG Parameters

The following parameters are applicable for communication through the JTAG debug interface. The JTAG module is fully compliant with IEEE1149.1-2000. Figure 3-7 Test Clock Timing (TCK) Table 3-23 JTAG Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. TCK clock period t1 SR 25 - - ns TCK high time t2 SR 10 - - ns TCK low time t3 SR 10 - - ns TCK clock rise time t4 S R --4 n s TCK clock fall time t5 S R --4 n s TDI/TMS setup to TCK rising edge t6 SR 6.0 - - ns TDI/TMS hold after TCK rising edge t7 SR 6.0 - - ns TDO valid after TCK falling edge (propagation delay) 1) 1) The falling edge on TCK is used to generate the TDO timing. t8 CC 3.0 - - ns CL≤20pF --1 6 n s CL≤50pF TDO hold after TCK falling edge 1) t18 CC 2 - - ns TDO high impedance to valid from TCK falling edge 1)2) 2) The setup time for TDO is given implicitly by the TCK cycle time. t9 CC - - 17.5 ns CL≤50pF TDO valid output to high impedance from TCK falling edge t10 C C --1 7 n s CL≤50pF MC_JTAG _TCK

0.9 VDDP

0.5 VDDP

0.1 VDDP

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationJTAG Parameters Data Sheet 3-168 V 1.0 2017-09 Figure 3-8 JTAG Timing t6 t7 t6 t7 t9 t8 t10 TCK TMS TDI TDO MC_JTAG t18

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationDAP Parameters Data Sheet 3-169 V 1.0 2017-09

3.17 DAP Parameters

The following parameters are applicable for communication through the DAP debug interface. Figure 3-9 Test Clock Timing (DAP0) Figure 3-10 DAP Timing Host to Device Table 3-24 DAP Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. DAP0 clock period t11 SR 7.51 - - ns DAP0 high time t12 SR 2 - - ns DAP0 low time t13 SR 2 - - ns DAP0 clock rise time t14 S R --1 n s f=133MHz --2 n s f=80MHz DAP0 clock fall time t15 S R --1 n s f=133MHz --2 n s f=80MHz DAP1 setup to DAP0 rising edge t16 SR 4 - - ns DAP1 hold after DAP0 rising edge t17 SR 2 - - ns DAP1 valid per DAP0 clock period 1) 1) The Host has to find a suitable sampling point by analyzing the sync telegram response. t19 CC 3 - - ns CL=20pF; f=133MHz 8 - - ns CL=20pF; f=80MHz 10 - - ns CL=50pF; f=40MHz MC_DAP0 MC_DAP1_RX

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationDAP Parameters Data Sheet 3-170 V 1.0 2017-09 Figure 3-11 DAP Timing Device to Host (DAP1 and DAP2 pins) Note: The DAP1 and DAP2 device to host timing is individual for both pins. There is no guaranteed max. signal skew. DAP1 MC_DAP1_TX t11 t19

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationASCLIN SPI Master Timing Data Sheet 3-171 V 1.0 2017-09

3.18 ASCLIN SPI Master Timing

This section defines the timings for the ASCLIN in the TC212 / TC213 / TC214 / TC222 / TC223 / TC224. Table 3-25 Master Mode A1+strong soft (sf) output pads Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. ASCLKO clock period 1) 1) PLL Jitter not included. Should be considered additionally, corresponding to the used baudrate. The duty cycle can be adjusted using the BITCON.SAMPLEPOINT bitfield with the finest granularity of TMAX = 1 / fMAX. t50 CC 20 - - ns CL=25pF Deviation from ideal duty cycle 2) Positive deviation lenghtens the high time and shortens the low time of a clock period. Negative deviation does the opposite. t500 CC -3 - 3 ns CL=25pF MTSR delay from ASCLKO shifting edge t51 CC -4 - 4 ns CL=25pF ASLSOn delay from the first ASCLKO edge t510 CC -4 - 4 ns CL=25pF MRST setup to ASCLKO latching edge t52 SR 20 - - ns CL=25pF MRST hold from ASCLKO latching edge t53 SR -3 - - ns CL=25pF Table 3-26 Master Mode A1+strong slow (sw) output pads Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. ASCLKO clock period 1) 1) PLL Jitter not included. Should be considered additionally, corresponding to the used baudrate. The duty cycle can be adjusted using the BITCON.SAMPLEPOINT bitfield with the finest granularity of TMAX = 1 / fMAX. t50 CC 80 - - ns CL=50pF Deviation from ideal duty cycle 2) Positive deviation lenghtens the high time and shortens the low time of a clock period. Negative deviation does the opposite. t500 CC -8 - 8 ns CL=50pF MTSR delay from ASCLKO shifting edge t51 CC -12 - 12 ns CL=50pF ASLSOn delay from the first ASCLKO edge t510 CC -12 - 12 ns CL=50pF MRST setup to ASCLKO latching edge t52 SR 40 - - ns CL=50pF MRST hold from ASCLKO latching edge t53 SR -3 - - ns CL=50pF

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationASCLIN SPI Master Timing Data Sheet 3-172 V 1.0 2017-09 Table 3-27 Master Mode medium output pads Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. ASCLKO clock period 1) 1) PLL Jitter not included. Should be considered additionally, corresponding to the used baudrate. The duty cycle can be adjusted using the BITCON.SAMPLEPOINT bitfield with the finest granularity of TMAX = 1 / fMAX. t50 CC 100 - - ns CL=50pF Deviation from ideal duty cycle 2) Positive deviation lenghtens the high time and shortens the low time of a clock period. Negative deviation does the opposite. t500 CC -10 - 10 ns CL=50pF MTSR delay from ASCLKO shifting edge t51 CC -15 - 15 ns CL=50pF ASLSOn delay from the first ASCLKO edge t510 CC -15 - 15 ns CL=50pF MRST setup to ASCLKO latching edge t52 SR 50 - - ns CL=50pF MRST hold from ASCLKO latching edge t53 SR -5 - - ns CL=50pF Table 3-28 Master Mode weak output pads Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. ASCLKO clock period 1) 1) PLL Jitter not included. Should be considered additionally, corresponding to the used baudrate. The duty cycle can be adjusted using the BITCON.SAMPLEPOINT bitfield with the finest granularity of TMAX = 1 / fMAX. t50 CC 1000 - - ns CL=50pF Deviation from ideal duty cycle 2) Positive deviation lenghtens the high time and shortens the low time of a clock period. Negative deviation does the opposite. t500 CC -25 - 25 ns CL=50pF MTSR delay from ASCLKO shifting edge t51 CC -65 - 65 ns CL=50pF ASLSOn delay from the first ASCLKO edge t510 CC -65 - 65 ns CL=50pF MRST setup to ASCLKO latching edge t52 SR 150 - - ns CL=50pF MRST hold from ASCLKO latching edge t53 SR -10 - - ns CL=50pF

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationQSPI Timings, Master and Slave Mode Data Sheet 3-173 V 1.0 2017-09 Figure 3-12 ASCLIN SPI Master Timing

3.19 QSPI Timings, Master and Slave Mode

This section defines the timings for the QSPI in the TC212 / TC213 / TC214 / TC222 / TC223 / TC224. It is assumed that SCLKO, MTSR, and SLSO pads have the same pad settings: Table 3-29 Master Mode timing A1+ strong soft (sf) output pads Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. SCLKO clock period 1) 1) Documented value is valid for master transmit or slave receive only. For full duplex the external SPI counterpart timing has to be taken into account. t50 CC 20 - - ns CL=25pF Deviation from the ideal duty cycle 2) 3) 2) The PLL jitter is not included. It should be considered additionally, corresponding to the used baudrate. The duty cycle can be adjusted using the bit fields ECONz.A, B and C with the finest granularity of TMAX = 1 / fMAX. 3) Positive deviation lenghtens the high time and shortens the low time of a clock period. Negative deviation does the opposite. t500 CC -3 - 3 ns CL=25pF MTSR delay from SCLKO shifting edge t51 CC -4 - 4 ns CL=25pF SLSOn deviation from the ideal programmed position t510 CC -4 - 4 ns CL=25pF MRST setup to SCLK latching edge 4) 4) For compensation of the average on-chip delay the Q SPI module provides the bit fields ECONz.A, B and C. t52 SR 20 4) --n s CL=25pF MRST hold from SCLK latching edge t53 SR -3 4) --n s CL=25pF ASCLIN_TmgMM.vsd ASCLKO MTSR t51 t51 MRST t53 Data valid ASLSO t510 t50 t500 t52 Data valid

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationQSPI Timings, Master and Slave Mode Data Sheet 3-174 V 1.0 2017-09 Table 3-30 Master Mode timing A1+ strong slow (sw) output pads Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. SCLKO clock period 1) 1) Documented value is valid for master transmit or slave receive only. For full duplex the external SPI counterpart timing has to be taken into account. t50 CC 80 - - ns CL=50pF Deviation from the ideal duty cycle 2) 3) 2) The PLL jitter is not included. It should be considered additionally, corresponding to the used baudrate. The duty cycle can be adjusted using the bit fields ECONz.A, B and C with the finest granularity of TMAX = 1 / fMAX. 3) Positive deviation lenghtens the high time and shortens the low time of a clock period. Negative deviation does the opposite. t500 CC -8 - 8 ns CL=50pF MTSR delay from SCLKO shifting edge t51 CC -12 - 12 ns CL=50pF SLSOn deviation from the ideal programmed position t510 CC -12 - 12 ns CL=50pF MRST setup to SCLK latching edge 4) 4) For compensation of the average on-chip delay the Q SPI module provides the bit fields ECONz.A, B and C. t52 SR 40 4) --n s CL=50pF MRST hold from SCLK latching edge t53 SR -3 - - ns CL=50pF Table 3-31 Master Mode timing A1+m/A1m output pads Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. SCLKO clock period 1) 1) Documented value is valid for master transmit or slave receive only. For full duplex the external SPI counterpart timing has to be taken into account. t50 CC 100 - - ns CL=50pF Deviation from the ideal duty cycle 2) 3) 2) The PLL jitter is not included. It should be considered additionally, corresponding to the used baudrate. The duty cycle can be adjusted using the bit fields ECONz.A, B and C with the finest granularity of TMAX = 1 / fMAX. 3) Positive deviation lenghtens the high time and shortens the low time of a clock period. Negative deviation does the opposite. t500 CC -3 - 3 ns CL=50pF MTSR delay from SCLKO shifting edge t51 CC -8 - 8 ns CL=50pF SLSOn deviation from the ideal programmed position t510 CC -15 - 15 ns CL=50pF MRST setup to SCLK latching edge 4) 4) For compensation of the average on-chip delay the Q SPI module provides the bit fields ECONz.A, B and C. t52 SR 50 4) --n s CL=50pF MRST hold from SCLK latching edge t53 SR -5 4) --n s CL=50pF

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationQSPI Timings, Master and Slave Mode Data Sheet 3-175 V 1.0 2017-09 Table 3-32 Master Mode Weak output pads Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. SCLKO clock period 1) 1) Documented value is valid for master transmit or slave receive only. For full duplex the external SPI counterpart timing has to be taken into account. t50 CC 1000 - - ns CL=50pF Deviation from the ideal duty cycle 2) 3) 2) The PLL jitter is not included. It should be considered additionally, corresponding to the used baudrate. The duty cycle can be adjusted using the bit fields ECONz.A, B and C with the finest granularity of TMAX = 1 / fMAX. 3) Positive deviation lenghtens the high time and shortens the low time of a clock period. Negative deviation does the opposite. t500 CC -25 - 25 ns CL=50pF MTSR delay from SCLKO shifting edge t51 CC -65 - 65 ns CL=50pF SLSOn deviation from the ideal programmed position t510 CC -65 - 65 ns CL=50pF MRST setup to SCLK latching edge 4) 4) For compensation of the average on-chip delay the Q SPI module provides the bit fields ECONz.A, B and C. t52 SR 150 4) --n s CL=50pF MRST hold from SCLK latching edge t53 SR -10 4) --n s CL=50pF Table 3-33 Slave mode timing Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. SCLK clock period t54 SR 4 x TMAX --n s SCLK duty cycle t55/t54 SR 40 - 60 % MTSR setup to SCLK latching edge t56 SR 3 - - ns MTSR hold from SCLK latching edge t57 SR 3 - - ns SLSI setup to first SCLK shift edge t58 SR 3 - - ns SLSI hold from last SCLK latching edge t59 SR 3 - - ns MRST delay from SCLK shift edge t60 CC 5 - 50 ns A1+m/A1m; CL=50pF 3 - 20 ns A1+sf; CL=25pF 5 - 40 ns A1+sw; CL=50pF 10 - 150 ns A1+w/A1w; CL=50pF SLSI to valid data on MRST t61 S R --9 n s

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationQSPI Timings, Master and Slave Mode Data Sheet 3-176 V 1.0 2017-09 Figure 3-13 Master Mode Timing Figure 3-14 Slave Mode Timing QSPI_TmgMM_EP.vsd SCLK1)2) MTSR1) t51 MRST1) t53 Data valid SLSOn2) 1) This timing is based on the following setup : ECON.CPH = 1, ECON.CPOL = 0, ECON.B=0 (no sampling point delay ). 2) t510 is the deviation from the ideal position configured with the leading delay , BACON.LPRE and BACON.LEAD > 0. t50 t500 t52 Data valid SAMPLING POINT t510

0.5 VDD 3

QSPI_TmgSM_EP.vsd SCLKI1) t55 MTSR1) t57 Data valid t56 SLSI 1) This timing is based on the following setup : ECON.CPH = 1, ECON.CPOL = 0. t54 t55 t59 Last latching SCLK edge First latching SCLK edge t57 Data valid t56 MRST1) t60 First shift SCLK edge t60 t61 t58

0.5 VDD3

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationFlash Parameters Data Sheet 3-177 V 1.0 2017-09

3.20 Flash Parameters

Program Flash program and erase operation is only allowed up the TJ = 150°C. Table 3-34 FLASH Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Program Flash Erase Time per logical sector tERP CC - - 1 s cycle count < 1000 - 0.207 + 0.003 * (S [KByte]) / fFSI [MHz])1) - s cycle count < 1000, for sector of size S Program Flash Erase Time per Multi-Sector Command tMERP CC - - 1 s For consecutive logical sectors in a physical sector, cycle count < 1000 - 0.207 + 0.003 * ( S [KByte]) / fFSI [MHz])1) - s For consecutive logical sector range of size S in a physical sector, cycle count < 1000 Program Flash program time per page in 3.3 V mode tPRP3 C C --8 1 + 3400/(fFSI [MHz]) µs 32 Byte Program Flash program time per burst in 3.3 V mode tPRPB3 C C --4 1 0 + 12000/(fF SI [MHz]) µs 256 Byte Program Flash program time for 1 MByte with burst programming in 3 V mode excluding communication tPRPB3_1MB CC - - 2.2 s Derived value for documentation purpose, valid for fFSI = 100MHz Write Page Once adder tADD CC - - 15 + 500/(fFSI [MHz]) µs Adder to Program Time when using Write Page Once Program Flash suspend to read latency tSPNDP CC - - 12000/( fF SI [MHz]) µs For Write Burst, Verify Erased and for multi- (logical) sector erase commands Data Flash Erase Time per Sector tERD CC - 0.12 + 0.08/(fFSI [MHz])1) - s cycle count < 1000 -0 . 5 7 + 0.15/(fFSI [MHz])1) 0.928 + 0.15/(fFSI [MHz]) s cycle count < 125000

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationFlash Parameters Data Sheet 3-178 V 1.0 2017-09 Data Flash Erase Time per Multi-Sector Command 2) tMERD CC - 0.12 + 0.01 * (S [KByte]) / (fFSI [MHz])1) - s For consecutive logical sector range of size S, cycle count < 1000 -0 . 5 7 + 0.019 * (S [KByte]) / fFSI [MHz])1) 0.928 + 0.019 * ( S [KByte]) / fFSI [MHz]) s For consecutive logical sector range of size S, cycle count < 125000 Data Flash erase disturb limit NDFD C C --5 0 c y c l e s Program time data flash per page 3) tPRD CC - - 50 + 2500/(fFSI [MHz]) 3) µs 8 Byte Data Flash program time per burst 3) tPRDB C C --9 6 + 4400/(fFSI [MHz]) 3) µs 32 Bytes Data Flash suspend to read latency tSPNDD CC - - 12000/( fF SI [MHz]) µs Wait time after margin change tFL_MarginDel CC --1 0 µ s Program Flash Retention Time, Sector tRET CC 20 - - years Max. 1000 erase/program cycles Data Flash Endurance per EEPROMx sector 4) NE_EEP10 CC 125000 - - cycles Max. data retention time 10 years UCB Retention Time tRTU CC 20 - - years Max. 100 erase/program cycles per UCB, max 400 erase/program cycles in total Data Flash access delay tDF CC - - 100 ns see PMU_FCON.WSDFLA SH Data Flash ECC Delay tDFECC CC - - 20 ns see PMU_FCON.WSECD F Program Flash access delay tPF CC - - 30 ns see PMU_FCON.WSPFLA SH Program Flash ECC delay tPFECC CC - - 10 ns see PMU_FCON.WSECP F Table 3-34 FLASH (cont’d) Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationFlash Parameters Data Sheet 3-179 V 1.0 2017-09 Number of erase operations on DF0 over lifetime NERD0 CC - - 750000 cycles Junction temperature limit for PFlash program/erase operations TJPFlash S R --1 5 0 ° C 1) All typical values were characterised, but are not tested. Typical values are safe median values at room temperature 2) Under out-of-spec conditions (e.g. over-cycling) or in case of activation of WL oriented defects, the duration of erase processes may be increased by up to 50%. 3) Time is not dependent on program mode (5V or 3.3V). 4) Only valid when a robust EEPROM emulation algorithm is used. For more details see the Users Manual. Table 3-34 FLASH (cont’d) Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationPackage Outline Data Sheet 3-180 V 1.0 2017-09

3.21 Package Outline

Figure 3-15 Package Outlines PG-TQFP-144-27 Note: It is recommended to use dimensions Ex and Ey for board layout considerations. Solder wetting between Ex / Ey and Ax / Ay and lead between Ex / Ey and Ax / Ay will not case any harm. Table 3-35 Exposed Pad Dimensions Ex; (nominal EPad size) 5.7 mm ± 50 µm Ey; (nominal EPad size) 5.7 mm ± 50 µm Ax; (solder able EPad size) 4.9 mm ± 50 µm Ay; (solder able EPad size) 4.9 mm ± 50 µm

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationPackage Outline Data Sheet 3-181 V 1.0 2017-09 Figure 3-16 Package Outlines PG-TQFP-100-23 Note: It is recommended to use dimensions Ex and Ey for board layout considerations. Solder wetting between Ex / Ey and Ax / Ay and lead between Ex / Ey and Ax / Ay will not case any harm. Table 3-36 Exposed Pad Dimensions Ex; (nominal EPad size) 5.7 mm ± 50 µm Ey; (nominal EPad size) 5.7 mm ± 50 µm Ax; (solder able EPad size) 4.9 mm ± 50 µm Ay; (solder able EPad size) 4.9 mm ± 50 µm

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationPackage Outline Data Sheet 3-182 V 1.0 2017-09 Figure 3-17 Package Outlines PG-TQFP-80-7 Note: It is recommended to use dimensions Ex and Ey for board layout considerations. Solder wetting between Ex / Ey and Ax / Ay and lead between Ex / Ey and Ax / Ay will not case any harm. You can find all of our packages, sorts of packing and others in our Infineon Internet Page “Products”: http://www.infineon.com/products.

3.21.1 Package Parameters

Table 3-37 Exposed Pad Dimensions Ex; (nominal EPad size) 5.7 mm ± 50 µm Ey; (nominal EPad size) 5.7 mm ± 50 µm Ax; (solder able EPad size) 4.9 mm ± 50 µm Ay; (solder able EPad size) 4.9 mm ± 50 µm Table 3-38 Thermal Characteristics of the Package Device Package RQJCT 1) RQJCB1) RQJA Unit Note TC212 / TC222 PG-TQFP-80-7 23.9 12.9 31.2 2) K/W with soldered exposed pad and internal pass device TC213 / TC223 PG-TQFP-100-23 23.8 13.0 31.1 2) K/W with soldered exposed pad and internal pass device TC214 / TC224 PG-TQFP-144-27 22.4 12.9 30.6 2) K/W with soldered exposed pad and internal pass device

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationPackage Outline Data Sheet 3-183 V 1.0 2017-09 1) The top and bottom thermal resistances between the case and the ambient (RTCAT, RTCAB) are to be combined with the thermal resistances between the junction and the case given above (RTJCT, RTJCB), in order to calculate the total thermal resistance between the junction and the ambient (RTJA). The thermal resistances between the case and the ambient (RTCAT, RTCAB) depend on the external system (PCB, case) characteristics, and are under user responsibility. The junction temperature can be calculated using the following equation: TJ = TA + RTJA * PD, where the RTJA is the total thermal resistance between the junction and the ambient. This total junction ambient resistance RTJA can be obtained from the upper four partial thermal resistances. Thermal resistances as measured by the ’cold plate method’ (MIL SPEC-883 Method 1012.1). 2) Value is defined in accordance with JEDEC JESD51-3, JESD51-5, and JESD51-7.

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 Electrical SpecificationQuality Declarations Data Sheet 3-184 V 1.0 2017-09

3.22 Quality Declarations

Table 3-39 Quali ty Parameters Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Operation Lifetime tOP - - 24500 hour ESD susceptibility according to Human Body Model (HBM) VHBM - - 2000 V Conforming to JESD22-A114-B ESD susceptibility according to Charged Device Model (CDM) VCDM - - 500 V for all other balls/pins; conforming to JESD22-C101-C - - 750 V for corner balls/pins; conforming to JESD22-C101-C Moisture Sensitivity Level MSL - - 3 Conforming to Jedec J-STD--020C for 240C

TC212 / TC213 / TC214 / TC222 / TC223 / TC224 HistoryChanges from Version TC21x22x_DS_V1.0 to Version Data Sheet 5-185 V 1.0 2017-09

4 History

Version 0.6 is the first version of this document. 4.1 Changes from Version TC21x22x_DS_V 1.0 to Version TC21x22x_AC_DS_V1.0

• O v e r l o a d – Remove parameter IING
• changes in table’ Class_S’ of Standard_Pads – add footenote ‘ VILx = 0.65 * VDDM’ to VIHS – add footenote ‘ VILx = 0.41 * VDDM’ to VILS
• Back-up Clock – Add parameter fBACKSS
• VADC – Add parameter tWU – Add parameter RMDU – Add parameter RMDD
• VADC_33 – Add parameter tWU – Add parameter RMDU – Add parameter RMDD
• Power Supply – Change max value of IEVRSB from 650 µA to 150 µA – Change note of IEVRSB from 'Standby RAM is active. Power to remaining domains switched off. TJ =25°C' to 'Standby RAM is active. Power to remaining domains switched off. TJ = 25°C; VEVRSB = 5V' – Update formulas 3.2 and 3.3
• Package Outlne –I m p r o v e i n f o r m a tion in table 3-35 –I m p r o v e i n f o r m a tion in table 3-36 –I m p r o v e i n f o r m a tion in table 3-37

Published by Infineon Technologies AG www.infineon.com