DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 15

Technical content

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2 075_T502 • 10/21/2016 One world. One KEMET Benefits

  • F-Tech and 100% SBDS (KEMET's patented Simulated B reakdown Voltage Screening)
  • 3 Si gma Screening for iL, DF and ESR
  • Qualified a t 1 ,000 h ours o f l ife t est a t 2 30°C a t 0 .33 V r
  • Voltage d erating o f 6 7% a t 2 30°C
  • Un ique high temperature material set
  • Me ets or exceeds EIA standard 535BAAC
  • St andard gold-plated terminations
  • Ro HS compliant
  • Operating t emperature r ange o f − 55ºC t o + 230ºC
  • Vo ltage derating applies
  • Ta ped and reeled per EIA 481
  • Me ets MSL 1 requirements for Pb-free assembly according to JEDEC J–STD–020
  • Pa ckaged in moisture barrier bags with desiccant and a humidity indicator card
  • Su rge current options available Overview The KEMET T502 Series is a high temperature product that offers optimum performance characteristics in

applications

w ith o perating t emperatures u p t o 2 30°C. Th is s eries i s c lassified a s m oisture s ensitivity l evel ( MSL) 1 u nder J S TD 0 20: u nlimited fl oor l ife t ime a t ≤ 3 0°C/85% RH. D ue to the potential use of high melting point solders, KEMET has taken the initiative to package this series in moisture barrier bags with desiccant and a humidity indicator card. Tantalum Surface Mount Capacitors – High Temperature T502 Series MnO2 230°C Typical applications include decoupling and filtering for very high temperature environments such as measurement-while- dr illing (MWD) in down-hole applications. K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2 075_T502 • 10/21/2016 Tantalum Surface Mount Capacitors – High Temperature T502 Series MnO 2 230°C

Ordering Information

T 502 D 685 M 035 A G 61 10 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Failure Rate/ Design Termination Finish Performance ESR T = Tantalum High Temperature 230°C B D First two digits represent significant fig ures. T hird di git s pecifies nu mber of zeros. K = ±10% M = ±20% 016 = 16 025 = 25 035 = 35 A = N/A G = Gold plated 61 = Surge None = S urge a t 2 5°C 63 = S urge − 55°C a nd + 85°C 10 = Standard ESR Performance Characteristics Item Performance Characteristics Operating Temperature −55°C t o 2 30°C Rated Capacitance Range 6.8 – 1 0 µ F a t 1 20 H z/25°C Capacitance Tolerance K Tolerance (10%), M Tolerance (20%) Rated Voltage Range 16 – 35 V DF (120 Hz) Refer t o P art N umber E lectrical S pecification T able ES R (100 kHz) Refer t o P art N umber E lectrical S pecification T able Le akage Current ≤ 0 .01 C V ( µA) a t r ated v oltage a fter 5 m inutes

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2 075_T502 • 10/21/2016 Tantalum Surface Mount Capacitors – High Temperature T502 Series MnO 2 230°C Qualification Test Condition Characteristics Endurance 230°C a t 1 /3 r ated vo ltage, 1 ,000 h ours Δ C /C Within ±10% of initial value DF Within 1.5 x initial limits DCL 1 mAmp maximum ESR Within 2.0 x initial limits Storage Life 230°C a t 0 vo lts, 1 ,000 h ours Δ C /C Within ±10% of initial value DF Within 1.5 x initial limits DCL 1 mAmp maximum ESR Within 2.0 x initial limits Humidity 85°C, 8 5% R H, 0 V , 5 00 h ours Δ C /C Within ±10% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits Temperature Stability Extreme temperature exposure at a succession o f c ontinuous s teps a t + 25°C, 5°C, + 25°C, + 85°C, + 150°C, + 25°C Δ C DF IL IL 1.5 x IL 1.5 x IL DCL IL N/A 10 x IL 12 x IL Mechanical Shock/ Vibration MIL –STD–202, Method 213, Condition I, 100 G peak MIL –STD–202, Method 204, 10 Hz to 2,000 Hz, 5G's for 20 minutes, 12 cycles each of 3 orientations Δ C /C Within ±10 of initial value DF Within initial limits DCL Within initial limits *IL = Initial limit

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2 075_T502 • 10/21/2016 Tantalum Surface Mount Capacitors – High Temperature T502 Series MnO 2 230°C

Electrical Characteristics

Impedance & ESR vs. Frequency The measurements were taken at room temperature (25°C) Capacitance vs. Frequency The measurements were taken at room temperature (25°C) Impedance, ESR (Ohms) Frequency (Hz) 1,000 100 0.1 100 1,000 10,000 100,000 1,000,000 10,000,000 502D685K035_IMP 502D685K035_ESR 502B106K016_IMP 502B106K016_ESR 100 0.1 Capacitance (µF) Frequency (Hz) 100 1,000 10,000 100,000 1,000,000 10,000,000 502D685K035_CAP(µF) 502B106K016_CAP(µF)

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2 075_T502 • 10/21/2016 Tantalum Surface Mount Capacitors – High Temperature T502 Series MnO 2 230°C Dimensions – Millimeters H X T B B G F E A L R P SIDE VIEW ANODE (+) END VIEW BOTTOM VIEWCATHODE (-) END VIEW W S S Termination cutout at KEMET's option, either end Case Size Component Total Weight KEMET EIA L W H F S B (Ref) X (Ref) P (Ref) R (Ref) T (Ref) A (Min) (mg) B 3528-21 3.5 ±0.2 (0.138 ±0.008) 2.8±0.2 (0.110±0.008) 1.9±0.2 (0.075±0.008) 2.2±0.1 (0.087±0.004) 0.80+0.1/−0.3 0.4±0.15 (0.016±0.006) 0.10±0.10 (0.004±0.004) 0.5 (0.020) 1.0 (0.039) 0.13 (0.005) 1.9 (0.075) 63 D 7343-31 7.3 ±0.3 (0.287 ±0.012) 4.3±0.3 (0.169±0.012) 2.8±0.3 (0.110±0.012) 2.4±0.1 (0.094±0.004) 1.3±0.3 (0.051 ±0.012) 0.5±0.15 (0.020±0.006) 0.10±0.10 (0.004±0.004) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 292 Notes: (Ref) – Dimensions provided for reference only. These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative Table 1 – Ratings & Part Number Reference Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp VDC at 85°C µF KEMET/EIA (See below for part options) µA at 25°C Max/5 Minutes % at 25°C

120 Hz Max

Ω at 25°C 100 kHz Max mA at +45°C 100 kHz °C 16 10 B/3528-21 T502B106(1)016AG(2)10 1.6 6 2.8 174 230 25 10 D/7343-31 T502D106(1)025AG(2)10 2.5 6 1.8 289 230 35 6.8 D/7343-31 T502D685(1)035AG(2)10 2.4 6 1.8 289 230 (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles −55°C +85°C Designates surge current option. Refer to Ordering Information for additional detail.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2 075_T502 • 10/21/2016 Tantalum Surface Mount Capacitors – High Temperature T502 Series MnO 2 230°C Recommended Voltage Derating Guidelines 10% 20% 30% 40% 50% 60% −55 25 85 125 175 200 215 230 % Rated Voltage Temperature (ºC) 33% Rated Voltage Working Voltage 25°C 85°C 125°C 200°C 215°C 230°C 16 16 16 13.1 7.5 6.4 5.3 25 25 25 20.5 11.8 10 8.3 35 35 35 28.7 16.5 14 11.6 Note: Additional reliability can be obtained through the derating of voltage Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. T he positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. T he negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified f or r everse v oltage. S ee th e R everse V oltage sec tion for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Ripple Current T ≤ 200°C 200 ≥ 220°C 220 ≥ 230°C 1.00 0.70 0.30 T = Environmental Temperature KEMET Case Code EIA Case Code Maximum Power Dissipation (P max) mWatts at 25°C w/+20°C Rise B 3528–21 85 D 7343–31 150 The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √P max/R E(max) = Z √P max/R I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms)

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2 075_T502 • 10/21/2016 Tantalum Surface Mount Capacitors – High Temperature T502 Series MnO 2 230°C Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. T he p ositive t erminal i s i dentified o n th e c apacitor b ody b y a s tripe, p lus i n so me c ases a b eveled e dge. A s mall de gree of transient reverse voltage is permissible for short periods per the below table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25°C 15% of Rated Voltage 85°C 5% of Rated Voltage 125°C 1% of Rated Voltage Table 2 – Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. L S W W L Grid Placement Courtyard

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2 075_T502 • 10/21/2016 Tantalum Surface Mount Capacitors – High Temperature T502 Series MnO 2 230°C Time Temperature Tsmin Tsmax TL TP Maximum Ramp Up Rate = 3ºC/sec Maximum Ramp Down Rate = 6ºC/sec tP tL ts 25ºC to Peak Soldering Process KEMET’s families of surface mount capacitors are co mpatible with wave (single or dual), convection, IR, or v apor p hase r eflow t echniques. P reheating o f th ese co mponents is recommended to avoid extreme thermal stress. K EMET's r ecommended p rofile c onditions f or co nvection a nd I R r eflow r eflect th e p rofile c onditions o f th e IP C/J–STD–020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow p asses a t th ese c onditions. Note that although the X/7343–43 case size can withstand wave s oldering, th e t all p rofile ( 4.3 m m m aximum) d ictates ca re in wave process development. Hand soldering should be performed with care due to the difficulty i n p rocess c ontrol. I f p erformed, c are s hould b e ta ken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow o ccurs. O nce r eflow o ccurs, th e i ron s hould b e re moved immediately. “Wiping” the edges of a chip and heating the top surface is not recommended. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (T Smin) 100°C 150°C Temperature Maximum (T Smax) 150°C 200°C Time (ts) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds Ramp-up Rate (T L to TP) 3°C/seconds ma ximum 3°C/seconds ma ximum Liquidous Temperature (T L) 183°C 217°C Time Above Liquidous (t L) 60 – 150 seconds 60 – 150 seconds Peak Temperature (T P) 220°C* 235°C** 250°C* 260°C** Time within 5°C of Maximum Peak Temperature (t P) 20 seconds maximum 30 seconds maximum Ramp-down Rate (T P to TL) 6°C/seconds ma ximum 6°C/seconds ma ximum Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y, and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature reels may soften or warp and tape p eel f orce m ay i ncrease. K EMET r ecommends th at m aximum s torage t emperature n ot e xceed 4 0ºC a nd m aximum st orage h umidity n ot e xceed 6 0% r elative h umidity. T emperature fl uctuations s hould b e mi nimized t o a void c ondensation on th e parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years of receipt.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2 075_T502 • 10/21/2016 Tantalum Surface Mount Capacitors – High Temperature T502 Series MnO 2 230°C Construction Leadframe (− Cathode) Leadframe (+ Anode) Tantalum Wire Molded Epoxy Case Molded Epoxy Case Polarity Bevel (+) Weld (to attach wire) TLPS Washer Polarity Stripe (+) Detailed Cross Section Tantalum Wire Tantalum Ta2O5 Dielectric (First Layer) Carbon (Third Layer) Nickel Plating (Fourth Layer) Washer MnO2 (Second Layer) Capacitor Marking KEMET High Temperature MnO2 Polarity Indicator (+) Rated Voltage Picofarad Code KEMET ID Date Code* * 540 = 40th week of 2015 Date Code * 1st digit = Last number of Year 5 = 2015 6 = 2016 7 = 2017 8 = 2018 9 = 2019 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2 075_T502 • 10/21/2016 Tantalum Surface Mount Capacitors – High Temperature T502 Series MnO 2 230°C Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Table 3 – Packaging Quantity Case Code Tape Width (mm) 7" Reel* 13" Reel* KEMET EIA S 3216-12 8 2,500 10,000 T 3528-12 8 2,500 10,000 M 3528-15 8 2,000 8,000 U 6032-15 12 1,000 5,000 L 6032-19 12 1,000 3,000 W 7343-15 12 1,000 3,000 Z 7343-17 12 1,000 3,000 V 7343-20 12 1,000 3,000 A 3216-18 8 2,000 9,000 B 3528-21 8 2,000 8,000 C 6032-28 12 500 3,000 D 7343-31 12 500 2,500 Q 7343-12 12 1,000 3,000 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 E/T428P 7360-38 12 500 2,000 H 7360-20 12 1,000 2,500 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. Top Tape Thickness 0.10 mm (0.004") Maximum Thickness 8 mm (0.315") or or 330 mm (13.0")

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2 075_T502 • 10/21/2016 Tantalum Surface Mount Capacitors – High Temperature T502 Series MnO 2 230°C Figure 5 – Reel Dimensions A D (See Note) Full Radius, See Note B (see Note) Access Hole at Slot Location (Ø 40 mm minimum) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth W3 (Includes flange distortion at outer edge) W2 (Measured at hub) W1 (Measured at hub) C (Arbor hole diameter) Note: Drive spokes optional; if used, dimensions B and D shall apply. N Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178±0.20 (7.008±0.008) or 330±0.20 (13.000±0.008) 1.5 (0.059) 13.0+0.5/−0.2 20.2 (0.795)12 mm 16 mm Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 8 mm (1.969) 8.4+1.5/−0.0 (0.331+0.059/−0.0) 14.4 (0.567) Shall accommodate tape width without interference12 mm 12.4+2.0/−0.0 (0.488+0.078/−0.0) 18.4 (0.724) (0.646+0.078/−0.0) 22.4 (0.882)

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2 075_T502 • 10/21/2016 Tantalum Surface Mount Capacitors – High Temperature T502 Series MnO 2 230°C KEMET Electronic Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation.