T4010S

T4010S KEYSIGHT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

02 | Keysight T4010S Conformance Test System - Technical Overview The Keysight Technologies, Inc. T4010S conformance test systems includes LTE and LTE-Advanced carrier aggregation (CA), RF and RRM conformance testing, RF solutions for design verification and pre-conformance of LTE device. The system goes beyond 3GPP-defined LTE RF and RRM conformance test cases, offering a wide range of supplementary test plans required for network operator acceptance and more. Compared to competing LTE RF and RRM test systems, the T4010S is the easiest to use test platform available. Conformance testing The T4010S conformance test system caters to the specific needs of laboratories at UE and chipset manufactures and third-party certification test houses. It provides a comprehensive set of tools that helps you through the process of entering UE-under-test data into the test system, defining the test plan to be executed, configuring the system to execute the tests according to the specific UE charac - teristics, analyzing the tests results, and producing the associated test reports. With an ever-increasing number of bands and frequency combinations, plus the need to support an expanding set of GCF and PTCRB test cases, Keysight is dedicated to an ongoing program of development and validation to make the Keysight T4010S test platform an invaluable and efficient asset for your test laboratory. Overview Design verification To address the unique testing needs of baseband and RF hardware developers, the system provides a comprehensive set of test cases following the 3GPP 36.521-1 test specifications for out-of-the-box pre-conformance testing of LTE UE designs. During the early phases of development, the T4010S DV system lets you create or customize test cases to verify LTE UE RF parametric design characteristics, preventing costly redesigns and mod - ifications in later project phases. That increases confidence and reduces the time-to-market for new LTE UE designs. Its modularity and flexibility also make the system an ideal tool for quality assurance and manufacturing screening. Key features The Keysight T4010S conformance test system has the capabilities you need to speed your LTE UE designs to market: – Easy-to-use test campaign manage - ment environment streamlines test execution and result analysis through design verification, conformance test, and supplementary testing – Reduced operation and maintenance costs—uses the most efficient hardware architecture on the market in terms of testing coverage with standard hardware supporting all active LTE frequency bands and duplex modes – Automated and unattended RF path compensation procedures – Clear and immediate access to the test results, including export to different formats (html, CSV, and XML) for extended analysis and archival – Test beyond the scope of 3GPP conformance. Configure test condi - tions and LTE signaling to customize your test plan with ease Complex testing made simple This integrated RF and RRM solution will help you from the design and verification stages up to certification of the final product, including operator’s acceptance test plans. Your complex testing is made simple thanks to the T4010S configuration options, ease of use, and automation capabilities.

03 | Keysight T4010S Conformance Test System - Technical Overview Accelerate Your Time to Market Complete 3GPP test case coverage for RF and RRM according to GCF and PTCRB requirements The T4010S E7515A-based system (GCF/ PTCRB TP 195) provides you with the com - plete set of 3GPP TS 36.521-1 LTE RF and 3GPP TS 36.521-3 LTE RRM conformance test cases, validated according to GCF and PTCRB requirements. These test cases include all the duplex/band/bandwidths combinations needed for certification purposes, including bands with different channel bandwidths requirements for GCF and PTCRB. And, as new requirements emerge, Keysight continues to add test cases. For an up to date list of validated tests, please contact Keysight Technologies. Complete set of RF measurement procedures for UE characterization As part of design verification the system provides you with a complete set of stan - dard and frequency band-independent test procedures that you can customize. These test procedures cover the complete set of measurements typically required to characterize LTE UEs including: – Power and power control measurements – Global in-channel measurements – Receiver measurements – Receiver performance measurements – CQI, sub-band CQI, and PMI reporting measurements – Occupied bandwidth, spectrum mask, and adjacent channel leakage power ratio measurements – Blocking and intermodulation measurements – Sustained data rate performance measurements – feICIC/eICIC Integration of E7515A UXM wireless test set The T4010S system is built around the Keysight Technologies, Inc. E7515A UXM wireless test set, extending the UXM functionality to pre-conformance & conformance testing. It also adds following features: – Receiver test capabilities including flexible channel definitions and closed- loop testing – Frequency division duplex (FDD) and time division duplex (TDD) options – Integrated fading – Out of the channel measurements (OBW, SEM, ACLR) Comprehensive test system automation capabilities The automated T4010S systems enables unattended operation, maximizing labora - tory productivity. The test systems can be easily configured to automatically control the UE under test using AT commands or non-standard, UE-specific command sets. Keysight provides access to the API used by the test system to implement the UE control, allowing you to develop your own UE drivers to automate test execution. Automation in the T4010S system also controls ancillary equipment, like power supplies and climate chambers, for completely unattended extreme condition testing. Easy upgrade options to expand test capabilities Since all T4010S systems share the same underlying hardware and software platform, it is easy to add conformance or design verification parametric testing as your needs evolve. Better still, DV and CT system software versions can coexist on the same test system, allowing you to switch between the systems at will, maximizing convenience and cost-effectiveness. T4010S conformance test system is based on the E7515A UXM wireless test system and includes the following: – Support for 1CC, 2CC, 3CC, 4CC band combinations and beyond – Sustained data rate – Scalable solution from one box to full system – Dual-feed antenna UE support – 2CC FDD/TDD CA intra-band contiguous/non-contiguous inter-band UL CA, and mixed mode test cases – UL CA 64QAM test cases – feICIC/eICIC test cases – 3CC FDD/TDD and mixed mode test cases – 256QAM DL test cases – 4CC test cases

04 | Keysight T4010S Conformance Test System - Technical Overview Compact and Scaleable Platform The Keysight T4010S conformance test system can be scaled to your requirements to support both RF CT and DV, and RRM test cases. Bench-top configuration To make it easy to adapt to your changing needs, scalability is one of the key aspects of the T4010S. There are two different bench-top configurations available. A single E7515A wireless test system can generate up two component carriers and enable testing of in-channel characteris - tics of the UE´s transmitter and receiver, receiver performance, CSI tests, spurious emission, ACLR, SEM, OBW, as well as TDD CA and sustained data rate test cases. – The single box solution can be easily upgraded to a higher coverage bench- top configuration by adding another E7515A and T1255A LTE multicell combiner unit in order to cover three component carrier test cases. Also, this configuration offers dual feed UE antenna support. Full test system configuration These configurations are capable of the broadest range of testing, including all UE RF characteristics, adding in-band and out-of-band blocking, intermodulation, transmitter and receiver spurious tests for two and three component carriers. Also, this configuration offers dual feed UE antenna support.

Figure 4. Protocol analysis (MSC view) resolving issues fast and easy.

07 | Keysight T4010S Conformance Test System - Technical Overview General Data Environmental conditions Temperature Storage Operating Operating temperature after RF calibration -10 to 50 ºC 5 to 40 ºC 20 to 35 ºC 5 to 85% (non-condensing) Humidity Altitude operating range Up to 2000 m Electrical safety Complies with European Low Voltage Directive 2006/95/EC IEC/EN 61010-1, 3rd Edition CAN/CSA-C22.2 No. 61010-1-12 UL Std. No. 61010-1 (3rd Edition) EMC Complies with European EMC Directive 2004/108/EC: IEC/EN 61326-1 CISPR Pub 11 Group 1, class A AS/NZS CISPR 11 ICES/NMB-001 This ISM device complies with Canadian ICES-001. Cet appareil ISM est conforme à la norme NMB-001 du Canada. Frequency range Defined by 3GPP E-UTRA operating bands FDD and TDD Input and output connector N-type 50 ohms Supported bandwidths 1.4, 3, 5, 10, 15, 20 MHz Supported Test Standards The system design is based on the following standards: – 3GPP TS 36.521-1 – 3GPP TS 36.521-3 – 3GPP TS 36.508 – 3GPP TS 36.509 – 3GPP TS 36.521-2 Test System Technical Information Configuration Dimensions W x H x D Weight 1: Dual-cell bench-top 435 x 305 (321 with feet) x 445 (504 with handles) 50 kg 2: Quad-cell bench-top 1500 x 305 (321 with feet) x 445 (504 with handles) 110 kg 4: Dual-cell full rack 600 x 1650 x 900 (+500 with keyboard tray) 265 kg 4: Quad-cell full rack 1200 x 1650 x 900 (+500 with keyboard tray) 415 kg

08 | Keysight | Keysight T4010S Conformance Test System - Technical Overview This information is subject to change without notice. © Keysight Technologies, 2013 - 2016 Published in USA, October 7, 2016 5991-2980EN www.keysight.com For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada (877) 894 4414 Brazil 55 11 3351 7010 Mexico 001 800 254 2440 United States (800) 829 4444 Asia Pacific Australia 1 800 629 485 China 800 810 0189 Hong Kong 800 938 693 India 1 800 11 2626 Japan 0120 (421) 345 Korea 080 769 0800 Malaysia 1 800 888 848 Singapore 1 800 375 8100 Taiwan 0800 047 866 Other AP Countries (65) 6375 8100 Europe & Middle East Austria 0800 001122 Belgium 0800 58580 Finland 0800 523252 France 0805 980333 Germany 0800 6270999 Ireland 1800 832700 Israel 1 809 343051 Italy 800 599100 Luxembourg +32 800 58580 Netherlands 0800 0233200 Russia 8800 5009286 Spain 800 000154 Sweden 0200 882255 Switzerland 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) United Kingdom 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-10-3-16) DEKRA Certified ISO9001 Quality Management System www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2015 Quality Management System Evolving Our unique combination of hardware, software, support, and people can help you reach your next breakthrough. We are unlocking the future of technology. From Hewlett-Packard to Agilent to Keysight myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. Keysight Services www.keysight.com/find/service Our deep offering in design, test, and measurement services deploys an industry-leading array of people, processes, and tools. The result? We help you implement new technologies and engineer improved processes that lower costs. Three-Year Warranty www.keysight.com/find/ThreeYearWarranty Keysight’s committed to superior product quality and lower total cost of ownership. Keysight is the only test and measurement company with three-year warranty standard on all instruments, worldwide. And, we provide a one-year warranty on many accessories, calibration devices, systems and custom products. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience.