T315XW02

AU Optronics Corp.,

31.5?쓂XGAColor TFT-LCDModul Model Name: T315XW02 VC

Manufacturer: AU Optronics Corp.,

Document: 28 Pages / 566Kb

Request Quote Download Datasheet Read online HTML view

More from AU Optronics Corp., Browse T parts

Online Datasheet

Read T315XW02 online.

T315XW02 AUO | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 28

Technical content

Datasheet sections

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. Ver 3 1/28 No Reproduction and Redistribution Allowed Product Description: T315XW02 TFT-LCD PANEL AUO Model Name: T315XW02 VC Customer Part No/Project Name : Customer Signature Date AUO Date Approved By: Yu Chieh Lin Reviewed By: Hong Jye Hong Prepared By: CT Wu

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. ver 3 2/28 No Reproduction and Redistribution Allowed Document Version : 3 Date : 2007/03/14 Product Specifications 31.5” WXGA Color TFT-LCD Module Model Name: T315XW02 VC ( ) Preliminary Specifications (*) Final Specifications

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. ver 3 4/28 No Reproduction and Redistribution Allowed Record of Revision Version Date No Old Description New Description Remark 0 2006/08/30 First issue 1 2007/01/10 7/11 Update B/L power consumption min/max value 1 2007/01/10 23 Add Thermal Shock Test Criteria 2 2007/02/08 7/11 Power consumption typ=115W (4.6A) Update Power consumption typ = 105W (4.375A) 3 2007/03/14 12 Horizontal section period min = 1414 Horizontal section period min = 1440 3 2007/03/14 11 Update inverter pin assignment pin 11~14

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. ver 3 5/28 No Reproduction and Redistribution Allowed 1. General Description This specification applies to the 31.5 inch Color TFT-LCD Module T315XW02 VC. This LCD module has a TFT active matrix type liquid crystal panel 1366x768 pixels, and diagonal size of 31.51 inch. This module supports 1366x768 XGA-WIDE mode (Non-interlace). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot. The T315XW02 VC has been designed to apply the 8-bit 1 channel LVDS interface method. It is intended to support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very important. * General Information Items Specification Unit Note Active Screen Size 31.5 inches Display Area 697.685 (H) x 392.256(V) mm Outline Dimension 760.0(H) x 450.0(V) x 45(D) mm With inverter Driver Element a-Si TFT active matrix Display Colors 16.7M Colors Number of Pixels 1366 x 768 Pixel Pixel Pitch 0.51075 mm Pixel Arrangement RGB vertical stripe Display Mode Normally Black Surface Treatment AG, 3H

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. ver 3 6/28 No Reproduction and Redistribution Allowed 2. Absolute Maximum Ratings The following are maximum values which, if exceeded, may cause permanent damage to the unit. Item Symbol Min Max Unit Conditions Logic/LCD Drive Voltage Vcc -0.3 7.0 [Volt] Note 1 Input Voltage of Signal Vin -0.3 3.6 [Volt] Note 1 BLU Input Voltage VDDB -0.3 28 [Volt] Note 1 BLU Brightness Control Voltage Vdim -0.3 7.0 [Volt] Note 1 Operating Temperature TOP 0 +50 [ oC] Note 2 Operating Humidity HOP 10 90 [%RH] Note 2 Storage Temperature TST -20 +60 [ oC] Note 2 Storage Humidity HST 10 90 [%RH] Note 2 Panel Surface Temperature PST 65 [ oC] Note 1: Duration:50 msec. Note 2 : Maximum Wet-Bulb should be 39 and No condensation.℃ The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures ℃ greater than 40, the wet bulb temperature must not exceed 39. ℃℃

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. ver 3 7/28 No Reproduction and Redistribution Allowed 3. Electrical Specification The T315XW02 VC requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The second input power for the BLU, is to power inverter.. Values Parameter Min Typ Max Unit Notes LCD: Power Supply Input Voltage Vcc 4.5 5.0 5.5 Vdc 1 Power Supply Input Current Icc - 1.2 1.5 A 2 Power Consumption Pc - 6.0 7.5 Watt 2 Inrush Current I RUSH - - 6 Apeak 3 Differential Input High Threshold Voltage VTH +100 mV 4 Differential Input Low Threshold Voltage VTL -100 mV 4 LVDS Interface Common Input Voltage VCIM 1.10 1.25 1.40 V 4 Input High Threshold Voltage VIH (High) 2.4 3.3 Vdc CMOS Interface Input Low Threshold Voltage VIL (Low) 0 0.7 Vdc Backlight Power Consumption PDDB 99 105 111 Watt 5,6 CCFL Life Time 60,000 Hours 7 Note : 1. The ripple voltage should be controlled under 10% of VCC 2. Vcc=5.0V, =vf 60Hz, fCLK=81.5Mhz , 25, Test Pattern : White Pattern℃

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. ver 3 8/28 No Reproduction and Redistribution Allowed 3. Measurement condition : Trush = 470 uS 10% 90% VCC GND 4. VCIM = 1.2V VTH VCIM VTL 5. The performance of the Lamp in LCM, for example life time or brightness, is extremely influenced by the characteristics of the DC-AC Inverter. So all the parameters of an inverter should be carefully designed so as not to produce too much leakage current from high-voltage output of the inverter. When you design or order the inverter, please make sure unwanted lighting caused by the mismatch of the lamp and the inverter (no lighting, flicker, etc) never occurs. When you confirm it, the LCD Assembly should be operated in the same condition as installed in your instrument. 6. Do not attach a conducting tape to lamp connecting wire. If the lamp wire attach to conducting tape, TFT-LCD Module have a low luminance and the inverter has abnormal action because leakage current occurs between lamp wire and conducting tape. 7. The relative humidity must not exceed 80% non-condensing at temperatures of 40 or less. At ℃ temperatures greater than 40, the wet bulb temperature must not exceed 39. When operate at low ℃℃ temperatures, the brightness of CCFL will drop and the life time of CCFL will be reduced.

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. ver 3 9/28 No Reproduction and Redistribution Allowed 3-2 Interface Connections - LCD connector (CN3): JAE FI-E30S or equivalent. - LVDS Transmitter: DS90C385 (NS) or equivalent Pin No Symbol Description note

1 Reserved Open or High Auo internal test pin

2 Reserved Open or High Auo internal test pin

3 Reserved Open or High Auo internal test pin

4 GND Ground and Signal Return

5 RIN0- LVDS Channel 0 negative

6 RIN0+ LVDS Channel 0 positive

7 GND Ground and Signal Return for LVDS

8 RIN1- LVDS Channel 1 negative

9 RIN1+ LVDS Channel 1 positive

10 GND Ground and Signal Return for LVDS

11 RIN2- LVDS Channel 2 negative

12 RIN2+ LVDS Channel 2 positive

13 GND Ground and Signal Return for LVDS

14 RCLK- LVDS Clock negative

15 RCLK+ LVDS Clock positive

16 GND Ground and Signal Return for LVDS

17 RIN3- LVDS Channel 3 negative

18 RIN3+ LVDS Channel 3 positive

19 GND Ground and Signal Return

20 Reserved Open or High Auo internal test pin

21 LVDS Option Low for JEIDA, High/Open for NS

22 Reserved Open

23 GND Ground and Signal Return

24 GND Ground and Signal Return

25 GND Ground and Signal Return

26 Vcc 5V, DC, Regulated

27 Vcc 5V, DC, Regulated

28 Vcc 5V, DC, Regulated

29 Vcc 5V, DC, Regulated

30 Vcc 5V, DC, Regulated

Note: 1. All GND (ground) pins should be connected together and should also be connected to the LCD ’s metal frame. All Vcc (power input) pins should be connected together.

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. Ver 3 11/28 No Reproduction and Redistribution Allowed BACKLIGHT CONNECTOR PIN CONFIGURATION - 1. Electrical specification MinTypMax Input Voltage---21.624.026.4VDC Input Current (Stable Condition) VDDB=24V 4.134.384.63ADC 1 Input Power (Stable Condition) VDDB=24V 99105111W 1 ONVDDB=24V2.0---5.0 OFFVDDB=24V0.0---0.8 On/Off Control CurrentIBLONVDDB=24V0.0---1.5mADC MAXVDDB=24V---3.3--- MINVDDB=24V---0.0--- Dimming Control CurrentVDIMVDC On/Off Control VoltageVBLONVDC ItemSymb. VDDB IDDB PDDB IRUSH Note Spec UnitCondition Note1 : VDIM= 3.3V (MAX) （Ta=25±5, Turn on for 45minutes℃ ） Note 2 : Measurement condition Rising time = 20 ms (VDDB : 10%~90%); 2. Input specification CN1: JST PHR-14 or equivalent No Symbol Description 1 VDDB (Main Power) DC input 24.0 VDC 2 VDDB (Main Power) DC input 24.0 VDC 3 VDDB (Main Power) DC input 24.0 VDC 4 VDDB (Main Power) DC input 24.0 VDC 5 VDDB (Main Power) DC input 24.0 VDC

6 GND Ground

7 GND Ground

8 GND Ground

9 GND Ground

10 GND Ground

11 DET Panel status detect(0~0.8V=Normal, High=Inverter shut down)

12 VBLON (Enable Pin) On/Off control Signal; High: On; Low: Off

13 VDIM (LCD Bright) Internal PWM Dimming control signal input (DC 0~3.3V) (3.3V : Maximum brightness, 0V min brightness) 14 Reserved Please leave it Open.

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. ver 3 12/28 No Reproduction and Redistribution Allowed 3-3 Signal Timing Specifications This is the signal timing required at the input of the User connector. All of the interface signal timing should be satisfied with the following specifications for it’s proper operation. * Timing Table DE only Mode Vertical Frequency: Notes: 1.) Display position is specific by the rise of DE signal only. Horizontal display position is specified by the rising edge of 1 st DCLK after the rise of 1 st DE, is displayed on the left edge of the screen. Vertical display position is specified by the rise of DE after a “Low” level period equivalent to eight times of horizontal period. The 1st data corresponding to one horizontal line after the rise the of 1 st DE is displayed at the top line of screen. 3.) If a period of DE “High” is less than 1366 DCLK or less than 768 lines, the rest of the screen displays black. 4.) The display position does not fit to the screen if a period of DE “High” and the effective data period do not synchronize with each other.

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. Ver 3 13/28 No Reproduction and Redistribution Allowed 3-4 Signal Timing Waveforms Th Tdisp(v) Tv DE RGB Data768 Line Invalid DataInvalid Data 1 Line Line Line 768 Line Line Tclk CLK DE RGB DataPixel 1366Invalid DataPixel Pixel Pixel Pixel Pixel Pixel Pixel 1366Invalid DataPixel Pixel Th Tdisp(h)

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. Ver 3 14/28 No Reproduction and Redistribution Allowed 3-5 Color Input Data Reference The brightness of each primary color (red, green and blue) is based on the 8 bit gray scale data input for the color; the higher the binary input, the brighter the color. The table below provides a reference for color versus data input. COLOR DATA REFERENCE Input Color Data RED MSB LSB GREEN MSB LSB BLUE MSB LSB Color R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Basic Color White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 RED(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RED(001) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ---- RED(254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RED RED(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GREEN(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GREEN(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 ---- GREEN(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 GREEN GREEN(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 BLUE(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 BLUE(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 BLUE(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 BLUE BLUE(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

3.6.1 Power Sequence for LCD

(+5V) Interface Signal (LVDS data & CLK) GND GND Valid Data 90% 10% 10%10% 10%10% 90% Backlight on/off control signal (VBLON) Values Parameter Min. Typ. Max. Units t1 0.4 - 20 Ms t2 0.5 - 50 Ms t3 500 - - Ms t4 10 - - Ms t5 0.5 - 50 Ms t6 - 300 Ms t7 1 - - S *1 If t3=200ms, input black signal till 700ms from system if necessary In case of t3<200ms, the abnormal display will be happened. But it will not damage timing controller. Note: The timing controller will not be damaged in case of TV set AC input power suddenly shut down. Once power reset, it should follow power sequence as spec. definition. (1) Apply the lamp voltage within the LCD operation range. When the back-light turns on before the LCD operation or the LCD turns off before the back-light turns off, the display may momentarily become abnormal screen.

3.6.2 Power Sequence for Inverter

Min. Typ. Max. Units T1 20 - - Ms T2 50 - - Ms T3 0 - - Ms T4 0 - - Ms T5 0 - - Ms T6 - - 10 Ms

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. ver 3 17/28 No Reproduction and Redistribution Allowed 4. Optical Specification Optical characteristics are determined after the unit has been ‘ON’ and stable for approximately 45 minutes in a dark environment at 25. The values specified are at an approximate distance 50cm from the LCD surface at a ℃ viewing angle of Φ and θequal to 0°. Fig.1 1 presents additional information concerning the measurement equipment and method. Values Parameter Symbol Min. Typ. Max. Units Notes Contrast Ratio CR 1200 1500 1 Surface Luminance, white LWH 400 500 cd/㎡ 2 Luminance Variation δWHITE 9 p 1.40 3 Response time Gray to Gray Tγ 8 ms 4 Color Gamut NTSC 72 % Color Coordinates RED R X 0.64 R Y 0.33 GREEN G X 0.29 G Y 0.60 BLUE B X 0.15 B Y 0.06 WHITE W X 0.28 W Y Typ.-0.03 0.29 Typ.+0.03 Viewing Angle x axis, right(φ=0°) θr 89 Degree 6 x axis, left(φ=180°) θl 89 y axis, up(φ=90°) θu 89 y axis, down (φ=0°) θd 89

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. Ver 3 18/28 No Reproduction and Redistribution Allowed Note: 1. Contrast Ratio (CR) is defined mathematically as: Surface Luminance of Lon1 Contrast Ratio= Surface Luminance of Loff1 2. Surface luminance is luminance value at point 1 across the LCD surface 50cm from the surface with all pixels displaying white. From more information see FIG 2. When VDDB = 24V, IDDB = 5A. L WH=Lon1 Where Lon1 is the luminance with all pixels displaying white at center 1 location. 3. The variation in surface luminance, δWHITE is defined (center of Screen) as: δWHITE(9P)= Maximum(Lon1, Lon2,…,Lon9)/ Minimum(Lon1, Lon2,…Lon9) 4. Response time is the time required for the display to transition from black to white(Rise Time, Tr R) and from white to black (Decay Time, TrD). For additional information see FIG3. 5. Tγ is the response time between any two gray scale and is based on fv=60Hz to optimize. 6. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For more information see FIG4. FIG. 2 Luminance 1 2 3 4 5 6 7 8 H V H/6 H/2 V/2 V/6

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. ver 3 19/28 No Reproduction and Redistribution Allowed FIG.3 Response Time The response time is defined as the following figure and shall be measured by switching the input signal for “any level of gray(bright) “ and “any level of gray(dark)”. Any level of gray(Bright) Any level of gray(Dark) Any level of gray(Bright) TrR Photodetector Output Time L0,15,L31, ….L255 FIG.4 Viewing angle

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. Ver 3 20/28 No Reproduction and Redistribution Allowed 5. Mechanical Characteristics The contents provide general mechanical characteristics for the model T315XW02 V1. In addition the figures in the next page are detailed mechanical drawing of the LCD. Horizontal 760.0mm Vertical 450.0mm Outline Dimension Depth 45mm Horizontal 703.6mm Bezel Opening Vertical 398.3mm Horizontal 697.68mm Active Display Area Vertical 392.26mm Weight 6500g Typ. Surface Treatment AG, 3H

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. ver 3 23/28 No Reproduction and Redistribution Allowed 6. Reliability: Environment test condition No Test Item Condition

1 High temperature storage test Ta=60℃ Determination:300h

2 Low temperature storage test Ta=-20℃ Determination:300h

3 High temperature operation test Ta=50℃ Determination:300h

4 Low temperature operation test Ta=-5℃ Determination:300h

5 Thermal Humidity Bias Test Ta=50℃ 80%RH Determination:300h

6 Thermal Shock Test Ta=-20℃/0.5h~60℃/0.5h Determination:500cycles

7 Vibration test

(non-operating) Wave form: random Vibration level : 1.0G RMS Bandwidth : 10-500Hz Duration: X, Y, Z 20min, one time each direction

8 Shock test

(non-operating) Shock level: 50G Waveform: half since wave, 11ms Direction: ±X, ±Y, ±Z, one time each direction

9 Vibration test

(with carton) Random wave Vibration:10~200Hz,1.5Grms,30minutes Direction: ±X, ±Y, ±Z, one time each direction

10 Drop test

(with carton) Height: 53.3cm 1 corner, 3 edges, 6 surfaces (ASTMD4169-I)

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. Ver 3 24/28 No Reproduction and Redistribution Allowed 7. International Standard 7-1. Safety (1) UL1950 Third Edition, Underwriters Laboratories, Inc. Jan. 28, 1995 Standard for Safety of Information Technology Equipment Including electrical Business Equipment. (2) CAN/CSA C22.2 No. 950-95/60950 Third Edition, Canadian Standards Association, Standard for Safety of Information Technology Equipment Including Electrical Business Equipment. (3) EN60950 : 1992+A2: 1993+A2: 1993+C3: 1995+A4: 1997+A11: 1997 IEC 950: 1991+A1: 1992+A2: 1993+C3: 1995+A4:1996 European Committee for Electrotechnical Standardization (CENELEC) EUROPEAN STANDARD for Safety of Information Technology Equipment Including Electrical Business Equipment. 7-2. EMC a) ANSI C63.4 “Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electrical Equipment in the Range of 9kHz to 40GHz. “American National standards Institute(ANSI), 1992 b) C.I.S.P.R “Limits and Methods of Measurement of Radio Interface Characteristics of Information Technology Equipment.” International Special committee on Radio Interference. c) EN 55022 “Limits and Methods of Measurement of Radio Interface Characteristics of Information Technology Equipment. ” European Committee for Electrotechnical Standardization. (CENELEC), 1998

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. Ver 3 25/28 No Reproduction and Redistribution Allowed 8. Packing Panel label: C US TW6562700014 TW65627: Production Lot 00014: Panel Serial Number ZMA: AUO internal code Manufactured 06/21: 2006 week 21 Made In Taiwan: Taiwan made Carton Label :

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. ver 3 27/28 No Reproduction and Redistribution Allowed 9. PRECAUTIONS Please pay attention to the followings when you use this TFT LCD module. 9-1 MOUNTING PRECAUTIONS (1) You must mount a module using holes arranged in four corners or four sides. (2) You should consider the mounting structure so that uneven force (ex. Twisted stress) is not applied to module. And the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module. (3) Please attach the surface transparent protective plate to the surface in order to protect the polarizer. Transparent protective plate should have sufficient strength in order to the resist external force. (4) You should adopt radiation structure to satisfy the temperature specification. (5) Acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) Do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than HB pencil lead. And please do not rub with dust clothes with chemical treatment. Do not touch the surface of polarizer for bare hand or greasy cloth. (Some cosmetics are detrimental to the polarizer.) (7) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks with petroleum benzene. Normal-hexane is recommended for cleaning the adhesives used to attach front/ rear polarizers. Do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) Wipe off saliva or water drops as soon as possible. Their long time contact with polarizer causes deformations and color fading. (9) Do not open the case because inside circuits do not have sufficient strength. 9-2 OPERATING PRECAUTIONS (1) The spike noise causes the mis-operation of circuits. It should be lower than following voltage: V=±200mV(Over and under shoot voltage) (2) Response time depends on the temperature. (In lower temperature, it becomes longer..) (3) Brightness depends on the temperature. (In lower temperature, it becomes lower.) And in lower temperature, response time (required time that brightness is stable after turned on) becomes longer. (4) Be careful for condensation at sudden temperature change. Condensation makes damage to polarizer or electrical contacted parts. And after fading condensation, smear or spot will occur. (5) When fixed patterns are displayed for a long time, remnant image is likely to occur. (6) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall be done by system manufacturers. Grounding and shielding methods may be important to minimize the interface.

©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 VC - Specs. ver 3 28/28 No Reproduction and Redistribution Allowed 9-3 ELECTROSTATIC DISCHARGE CONTROL Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that treatment persons are connected to ground through wrist band etc. And don’t touch interface pin directly. 9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE Strong light exposure causes degradation of polarizer and color filter. 9-5 STORAGE When storing modules as spares for a long time, the following precautions are necessary. (1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the temperature between 5 and 35 at normal humidity.℃℃ (2) The polarizer surface should not come in contact with any other object. It is recommended that they be stored in the container in which they were shipped. 9-6 HANDLING PRECAUTIONS FOR PROTECTION FILM (1) The protection film is attached to the bezel with a small masking tape. When the protection film is peeled off, static electricity is generated between the film and polarizer. This should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) When the module with protection film attached is stored for a long time, sometimes there remains a very small amount of flue still on the Bezel after the protection film is peeled off. (3) You can remove the glue easily. When the glue remains on the Bezel or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane.

Product Information

T315XW02 specifications and overview.

Summary

31.5?쓂XGAColor TFT-LCDModul Model Name: T315XW02 VC

Description

31.5?쓂XGAColor TFT-LCDModul Model Name: T315XW02 VC

Source title T315XW02 Datasheet(PDF) - AU Optronics Corp.,

Related Parts

More parts from the same family.

Browse manufacturer