T315HW07V8 AUO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 31
Technical content
Datasheet sections
- 1 GENERAL DESCRIPTION
- 2 ABSOLUTE MAXIMUM RATINGS
- 3 ELECTRICAL SPECIFICATION
- 4 OPTICAL SPECIFICATION
- 5 MECHANICAL CHARACTERISTICS
- 6 RELIABILITY TEST ITEMS
- 7 INTERNATIONAL STANDARD
- 8 PACKING
- 9 PRECAUTION
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 1 / 31 Model Name: T315HW07 V8 Issue Date : 2011/01/20 ( )Preliminary Specifications (/g992/g992/g992/g992)Final Specifications
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 3 / 31 Record of Revision Version Date Page D e s c r i p t i o n 0.0 2010/08/03 F i r s t r e l e a s e 0.1 2010/10/08 19 Update Color Coordinates 2 0 1 0 / 1 0 / 2 5 15 Add note 3 1.0 2010/12/01 6 Update BLU power consumption 1 9 U p d a t e l u m i n a n c e a n d C R s p e c 2.0 2011/01/20 19
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 4 / 31 1. General Description This specification applies to the 32.0 inch Color T FT-LCD Module T315HW07 V8. This LCD module has a TF T active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 32.0 inch. This modul e supports 1,920x1,080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot. The T315HW07 V8 has been designed to apply the 8-bi t 2 channel LVDS interface method. It is intended t o support displays where high brightness, wide viewin g angle, high color saturation, and high color dept h are very important. * General Information Items Specification Unit Note Active Screen Size 32.00 inch Display Area 698.40(H) x 392.85(V) mm Outline Dimension 735.4(H) x 433.0 (V) x 20.9(D) mm D : f r o n t b e z e l t o T - c o n c o v e r Driver Element a-Si TFT active matrix Bezel Opening 705.4(H) x 400 (V) mm Display Colors 8 bit, 16.7M Colors Number of Pixels 1,920x1,080 Pixel Pixel Pitch 0.36375 (H) x 0.36375 (W) mm Pixel Arrangement RGB vertical stripe Display Operation Mode Normally Black Surface Treatment Anti-Glare, 3H Haze=2%
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 5 / 31 2. Absolute Maximum Ratings The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit Item Symbol Min Max Unit Conditions Logic/LCD Drive Voltage Vcc -0.3 14 [Volt] Note 1 Input Voltage of Signal Vin -0.3 4 [Volt] Note 1 Operating Temperature TOP 0 +50 [ oC] Note 2 Operating Humidity HOP 10 90 [%RH] Note 2 Storage Temperature TST -20 +60 [ oC] Note 2 Storage Humidity HST 10 90 [%RH] Note 2 Panel Surface Temperature PST 65 [ oC] Note 3 Note 1: Duration:50 msec. Note 2 : Maximum Wet-Bulb should be 39 and No conde nsation. The relative humidity must not exceed 90% non-conde nsing at temperatures of 40 or less. At temperature s greater than 40 , the wet bulb temperature must not exceed 39 . Note 3: Surface temperature is measured at 50 Dry condition
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 6 / 31 3. Electrical Specification The T315HW07 V8 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The second input for BLU is to power inverter.
3.1 Electrical Characteristics
3.1.1: DC Characteristics Value Parameter Symbol Min. Typ. Max Unit Note LCD Power Supply Input Voltage V DD 1 0 . 8 1 2 1 3 . 2 V DC Power Supply Input Current I DD - - 0 . 3 9 0 . 5 6 A 1 Power Consumption P C - - 4.68 6.72 Watt 1 Inrush Current IRUSH - - - - 3 A 2 Input Differential Voltage VID 200 400 600 mV DC 3 Differential Input High Threshold Voltage VTH + 1 0 0 - - + 3 0 0 m V DC 3 Differential Input Low Threshold Voltage VTL - 3 0 0 - - - 1 0 0 m V DC 3 LVDS Interface Input Common Mode Voltage V ICM 1 . 1 1 . 2 5 1 . 4 V DC 3 Input High Threshold Voltage VIH (High) 2.7 -- 3.3 V DC 4 CMOS Interface Input Low Threshold Voltage VIL (Low) 0 -- 0.6 V DC 4 Backlight Power Consumption P BL - - 37.3 40.7 Watt Life time (MTTF) 3 0 0 0 0 Hour 7, 8
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 7 / 31 3.1.2: AC Characteristics Value Parameter Symbol Min. Typ. Max Unit Note Receiver Clock : Spread Spectrum Modulation range Fclk_ss Fclk -3% Fclk +3% MHz Receiver Clock : Spread Spectrum Modulation frequency Fss 200 KHz
5 LVDS
Receiver Data Input Margin F c l k = 8 5 M H z F c l k = 6 5 M H z tRMG -0.4 -0.5 0.4 0.5 ns Note : 1. Test Condition: (1) V DD = 12.0V (2) Fv = Type Timing, 60Hz (3) Fclk= Max freq. (4) Temperature = 25 (5) Typ. Input current : White Pattern Max. Input current: Heavy loading pattern defined by AUO 2. Measurement condition : Rising time = 400us GNDGNDGNDGND VVVVDDDD DDDD 10% 90% 400400 400400 sµ 3. VICM = 1.25V V TH V TL |V ID |V ICM GND |V ID | |V ID | LVDS - LVDS +
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 8 / 31 4. The measure points of VIH and VIL are in LCM side after connecting the System Board and LCM. 5. LVDS Receiver Clock SSCG (Spread spectrum clock generator) is defined as below figures 1111////FFFFSSSS SSSS FclkFclkFclkFclk____ssss ssss((((maxmaxmaxmax)))) FclkFclkFclkFclk____ssss ssss((((minminminmin)))) FclkFclkFclkFclk
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 9 / 31 6. R e c e i v e r D a t a I n p u t M a r g i n Rating Parameter Symbol Min Type Max Unit Note Input Clock Frequency Fclk Fclk (min) -- Fclk (max) M H z T=1/Fclk Input Data Position0 tRIP1 -|tRMG| 0 |tRMG| ns Input Data Position1 tRIP0 T/7-|tRMG| T/7 T/7+|tRMG | ns Input Data Position2 tRIP6 2T/7-|tRMG| 2T/7 2T/7+|tRMG| ns Input Data Position3 tRIP5 3T/7-|tRMG| 3T/7 3T/7+|tRMG| ns Input Data Position4 tRIP4 4T/7-|tRMG| 4T/7 4T/7+|tRMG| ns Input Data Position5 tRIP3 5T/7-|tRMG| 5T/7 5T/7+|tRMG| ns Input Data Position6 tRIP2 6T/7-|tRMG| 6T/7 6T/7+|tRMG| ns Rx1 Rx0 Rx6 Rx5 Rx4 Rx3 Rx2 Rx1 Rx0 Rx6Rx2Rx3 tRIP1 tRIP0 tRIP6 tRIP5 tRIP4 tRIP3 tRIP2 VVVVdiff diff diff diff = = = = 0000VVVV 1/Fclk=T LVDS-Rx Input Clock LVDS-Rx Input Data 7. The relative humidity must not exceed 80% non-conde nsing at temperatures of 40 o r l e s s . A t temperatures greater than 40 , the wet bulb temperature must not exceed 39 . When operate at low temperatures, the brightness of LED will drop and the life time of LED will be reduced. 8. The lifetime (MTTF) is defined as the time which luminance of LED is 50% compared to its original value. [ O p e r a t i n g c o n d i t i o n : C o n t i n u o u s o p e r a t i n g at Ta = 25±2
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 10 / 31
3.2 Interface Connections
LCD connector: 187059-51221 (P-TWO, LVDS connector) PIN Symbol Description PIN Symbol Description
1 NC No connection 26 NC No connection
2 NC No connection 27 NC No connection
3 NC No connection 28 CH2_0- LVDS Channel 2, Signal 0-
4 NC No connection 29 CH2_0+ LVDS Channel 2, Signal 0+
5 NC No connection 30 CH2_1- LVDS Channel 2, Signal 1-
6 ROTATE
Panel Rotation Display Control High(3.3V) : Rotate Enable Open/Low(GND) : Rotate Disable
31 CH2_1+ LVDS Channel 2, Signal 1+
7 LVDS_SEL Open/High(3.3V) for NS, Low(GND) for JEIDA 32 CH2_2- LVDS Channel 2, Signal 2-
8 NC No connection 33 CH2_2+ LVDS Channel 2, Signal 2+
9 NC No connection 34 GND Ground
10 NC No connection 35 CH2_CLK- LVDS Channel 2, Clock -
11 GND Ground 36 CH2_CLK+ LVDS Channel 2, Clock +
12 CH1_0- LVDS Channel 1, Signal 0- 37 GND Ground
13 CH1_0+ LVDS Channel 1, Signal 0+ 38 CH2_3- LVDS Channel 2, Signal 3-
14 CH1_1- LVDS Channel 1, Signal 1- 39 CH2_3+ LVDS Channel 2, Signal 3+
15 CH1_1+ LVDS Channel 1, Signal 1+ 40 NC No connection
16 CH1_2- LVDS Channel 1, Signal 2- 41 NC No connection
17 CH1_2+ LVDS Channel 1, Signal 2+ 42 NC No connection
18 GND Ground 43 NC No connection
19 CH1_CLK- LVDS Channel 1, Clock - 44 GND Ground
20 CH1_CLK+ LVDS Channel 1, Clock + 45 GND Ground
21 GND Ground 46 GND Ground
22 CH1_3- LVDS Channel 1, Signal 3- 47 NC No connection
23 CH1_3+ LVDS Channel 1, Signal 3+ 48 VDD
Power Supply, +12V DC Regulated
24 NC No connection 49 VDD
Power Supply, +12V DC Regulated
25 NC No connection 50 VDD
Power Supply, +12V DC Regulated 5 1 VDD Power Supply, +12V DC Regulated Note: N.C. : please leave this pin unoccupied. It can not be connected by any signal (Low/GND/High).
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 11 / 31 LVDS Option = High/OpenNS BBBB2222NANA NANA DEDE DEDEDEDE DEDEBBBB2222BBBB3333 BBBB4444BBBB5555NANA NANA BBBB3333 RRRR0000RRRR5555 GGGG0000GGGG0000RRRR0000RRRR1111 RRRR2222RRRR3333RRRR4444 RRRR1111 GGGG1111BBBB0000 BBBB1111BBBB1111GGGG1111GGGG2222 GGGG3333GGGG4444GGGG5555 GGGG2222 ClockClockClockClock CHxCHxCHxCHx____0000++++ CHxCHxCHxCHx____0000---- CHxCHxCHxCHx____1111++++ CHxCHxCHxCHx____1111---- CHxCHxCHxCHx____2222++++ CHxCHxCHxCHx____2222---- CHxCHxCHxCHx____3333++++ CHxCHxCHxCHx____3333---- RRRR6666BBBB7777 NANA NANANANA NANARRRR6666RRRR7777 GGGG6666GGGG7777BBBB6666 RRRR7777 Previous Cycle Curre nt Cycle Next Cycle Previous Cycle Curre nt Cycle Next Cycle Previous Cycle Curre nt Cycle Next Cycle Previous Cycle Curre nt Cycle Next Cycle LVDS Option = LowJEIDA BBBB4444NANA NANA DEDE DEDEDEDE DEDEBBBB4444BBBB5555 BBBB6666BBBB7777NANA NANA BBBB5555 RRRR2222RRRR7777 GGGG2222GGGG2222RRRR2222RRRR3333 RRRR4444RRRR5555RRRR6666 RRRR3333 GGGG3333BBBB2222 BBBB3333BBBB3333GGGG3333GGGG4444 GGGG5555GGGG6666GGGG7777 GGGG4444 ClockClockClockClock RRRR0000BBBB1111 NANA NANANANA NANARRRR0000RRRR1111 GGGG0000GGGG1111BBBB0000 RRRR1111 CHxCHxCHxCHx____0000++++ CHxCHxCHxCHx____0000---- CHxCHxCHxCHx____1111++++ CHxCHxCHxCHx____1111---- CHxCHxCHxCHx____2222++++ CHxCHxCHxCHx____2222---- CHxCHxCHxCHx____3333++++ CHxCHxCHxCHx____3333---- Previous Cycle Curre nt Cycle Next Cycle Previous Cycle Curre nt Cycle Next Cycle Previous Cycle Curre nt Cycle Next Cycle Previous Cycle Curre nt Cycle Next Cycle
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 12 / 31
3.3 Signal Timing Specification
This is the signal timing required at the input of the user connector. All of the interface signal tim ing should be satisfied with the following specifications for its proper operation. Timing Table (DE only Mode) Signal Item Symbol Min. Typ. Max Unit Period Tv 1090 1125 1480 Th Active Tdisp (v) 1080 Th Vertical Section Blanking Tblk (v) 10 400 Th Period Th 1030 1100 1325 Tclk Active Tdisp (h) 960 Tclk Horizontal Section Blanking Tblk (h) 70 140 365 Tclk Clock Frequency Fclk=1/Tclk 50 74.25 MHz Vertical Frequency Frequency Fv 47 Hz Horizontal Frequency Frequency Fh 60 67.5 KHz Notes: (1) Display position is specific by the rise of DE signal only. Horizontal display position is specified by the rising edge of 1st DCLK after the rise of 1st DE, is displayed on the left edge of the screen. (2)Vertical display position is specified by the ri se of DE after a “Low” level period equivalent to e ight times of horizontal period. The 1st data corresponding to one horizontal line after the rise of 1st DE is displayed at the top line of screen. (3)If a period of DE “High” is less than 1920 DCLK or less than 1080 lines, the rest of the screen displays black. (4)The display position does not fit to the screen if a period of DE “High” and the effective data period do not synchronize with each other.
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 13 / 31
3.4 Signal Timing Waveforms
Tdisp(v) Tblk(v) Tv DE RGB Data Line N Invalid DataInvalid Data Line Line Line Line N Line Tclk CLK DE CH1 CH2 Pixel M-7 Pixel M-5 Pixel M-3 Pixel M-1 Pixel M-6 Pixel M-4 Pixel M-2 Pixel M Invalid Data Invalid Data Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel Pixel M-5 Pixel M-3 Pixel M-1 Pixel M-4 Pixel M-2 Pixel M Invalid Data Invalid Data Pixel Pixel Pixel Pixel Th Tdisp(h) Tblk(h) MMMM ppppiiiixxxxeeeellll N LineN LineN LineN Line
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 14 / 31
3.5 Color Input Data Reference
The brightness of each primary color (red, green and blue) is based on the 8 bit gray scale data input for the color; the higher the binary input, the brighter the color. The table below provides a reference for color versus data input. COLOR DATA REFERENCE Input Color Data RED MSB LSB GREEN MSB LSB BLUE MSB LSB Color R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Basic Color White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 RED(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RED(001) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ---- RED(254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R RED(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GREEN(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GREEN(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 ---- GREEN(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 G GREEN(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 BLUE(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 BLUE(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ---- BLUE(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 B BLUE(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 15 / 31 Power Sequence for LCD Values Parameter Min. Type. Max. Unit t1 0.4 /g691 ---/g691 30/g691 ms t2 0.1 /g691 ---/g691 150/g691 ms t4 0 *1 /g691 ms t8/g691 10/g691 ---/g691 50/g691 ms/g691 Note: (1) t4=0 : concern for residual pattern before BLU turn off. (2) t6 : voltage of VDD must decay smoothly after power-off. (customer system decide this value) (3) When CMOS Interface is N.C. (no connection), opened in Transmitted end, T8 timing spec can be negligible Power Supply For LCD Power Supply For LCD Power Supply For LCD Power Supply For LCD VDD VDD VDD VDD (+(+ (+(+1212 1212VVVV)))) Interface SignalInterface SignalInterface SignalInterface Signal ((((LVDS Data LVDS Data LVDS Data LVDS Data & & & & CLKCLKCLKCLK)))) Backlight onBacklight onBacklight onBacklight on/ ///offoff offoff control signalcontrol signalcontrol signalcontrol signal ((((VBLONVBLONVBLONVBLON) ))) 10% 90% t3 t4 t5 t6 10% 90% 10% GND GND Valid DataValid DataValid DataValid Data GND CMOS Interface SignalCMOS Interface SignalCMOS Interface SignalCMOS Interface Signal GND t8 t9
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 16 / 31
3.7 Backlight Specification
T h e b a c k l i g h t u n i t c o n t a i n s 2 p c s l i g h t b a r .
3.7.1 Electrical specification
Note 1 : Dimming ratio= 100% (MAX) Ta=25±5 , Turn on for 45minutes Note 2: Measurement condition Rising time = 20ms (VDDB : 10%~90%); Note 3: When BLU off ( VDDB = 24V , VBLON = 0V) , IDDB (max) = 0.02A Note 4: V_DIM voltage of 100% duty ratio =3.1V~3.3V means Burst Mode entry point should be located between 3.1V and 3.3V. Note 5: Less than 5% dimming control is functional well and no backlight shutdown happened Note 6: Normal : 0~0.8V ; Abnormal : Open collector Spec Item Symbol Condition Min Typ Max Unit Note 1 Input Voltage VDDB - 22.8 24 25.2 VDC - 2 Input Current I DDB V D D B = 2 4 V 1 . 7 1 . 8 6 ADC 1 3 Input Power P DDB V D D B = 2 4 V 37.3 40.7 W 1
4 Inrush Current I RUSH V D D B = 2 4 V 4 A D C 2
ON 2 - 5.5 -
5 On/Off control voltage VBLON
VDDB=24V 0 - 0.8 VDC 6 On/Off control current IBLON V D D B = 2 4 V - - 1.5 mA - MAX 3.1 - 5.5 VDC 4
7 Dimming Control Voltage V_DIM
VDDB=24V - 0 - VDC -
8 Dimming Control Current I_DIM VDDB=24V - - 2 mADC -
9 Internal Dimming Ratio DIM_R VDDB=24V 5 - 100 % 5
MAX VDDB=24V 2 - 5.5 -
10 External PWM
Control Voltage V_EPWM MIN VDDB=24V 0 - 0.8 VDC
11 External PWM
Control Current I_EPWM VDDB=24V - - 2 mADC -
12 External PWM Duty ratio D_EPWM VDDB=24V 5 - 100 % 5
13 External PWM
Frequency F_EPWM VDDB=24V 140 180 240 Hz - HI Open Collector VDC 6
14 DET status signal DET
VDDB=24V 0 - 0.8 VDC 6
15 Input Impedance Rin VDDB=24V 300 Kohm -
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 17 / 31
3.7.2 Input Pin Assignment
LED driver board connector : Cvilux CI0114M1HR0-NH (Note*) IF External PWM function includes 5% dimming ratio. Judge condition as below: (1) Backlight module must be lighted ON normally. (2) All protection function must work normally. (3) Uniformity and flicker could NOT be guaranteed Pin Symbol Description
1 VDDB Operating Voltage Supply, +24V DC regulated
2 VDDB Operating Voltage Supply, +24V DC regulated
3 VDDB Operating Voltage Supply, +24V DC regulated
4 VDDB Operating Voltage Supply, +24V DC regulated
5 VDDB Operating Voltage Supply, +24V DC regulated
6 BLGND Ground and Current Return
7 BLGND Ground and Current Return
8 BLGND Ground and Current Return
9 BLGND Ground and Current Return
10 BLGND Ground and Current Return
11 DET BLU status detection:
Normal : 0~0.8V ; Abnormal : Open collector
12 VBLON
BLU On-Off control: BL On : High/Open (2V~5.5V); BL off : Low (0~0.8V/GND) 13 VDIM Internal PWM (0~3.3V for 10~100% Duty, open for 100%) < NC ; at External PWM mode>
14 PDIM External PWM (10%~100% Duty, open for 100%)
< NC ; at Internal PWM mode>
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 18 / 31
3.7.3 Power Sequence for Backlight
(VDDB) Dimming Control Signal (V_IPWM,V_EPWM) BLU On/Off Enable (VBLON) 24V(typ.) 10% 90% 90% T1 T2 T3 T4 Power Input for BLU (VDDB) Dimming Control Signal (V_IPWM,V_EPWM) BLU On/Off Enable (VBLON) 24V(typ.) 10% 90% 90% T1 T2 T3 T4 Dip condition for Inverter Power Input for BLU (VDDB) T6 VDDB(typ.)*0.8 Power Input for BLU (VDDB) T6 VDDB(typ.)*0.8 Value Parameter Min Typ Max Units T1 20 - - ms T2 500 - - ms T3 250 - - ms T4 0 - - ms T5 1 - - ms T6 - - 10 ms
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 19 / 31 4. Optical Specification Optical characteristics are determined after the un it has been ‘ON’ and stable for approximately 45 mi nutes in a dark environment at 25° C. The values specified are at an approximate distance 50cm from the LCD surfac e at a viewing angle of φ and θ equal to 0° . Fig.1 presents additional information concerning the measurement equipment and method. Values Parameter Symbol Min. Typ. Max Unit Notes Contrast Ratio CR 2800 3500 -- 1 Surface Luminance (White) L WH 288 360 -- cd/m 2 2 Luminance Variation δWHITE(9P) - - - - 1 . 3 3 3 Response Time (G to G) T γ - - 6 . 5 - - M s 4 Color Gamut NTSC 72 % Color Coordinates Red R X 0 . 6 3 0 R Y 0 . 3 3 0 Green G X 0 . 3 2 0 G Y 0 . 6 2 0 Blue B X 0 . 1 5 0 B Y 0 . 0 4 0 White W X 0 . 2 8 0 W Y Typ.-0.03 0.290 Typ.+0.03 Viewing Angle 5 x axis, right(φ=0° ) θr - - 8 9 - - d e g r e e x axis, left(φ=180° ) θl - - 8 9 - - d e g r e e y axis, up(φ=90° ) θu - - 8 9 - - d e g r e e y axis, down (φ=270° ) θd - - 8 9 - - d e g r e e SR3 or equivalent
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 20 / 31 Note: 1. Contrast Ratio (CR) is defined mathematically as: Surface Luminance of Lon5 Contrast Ratio= Surface Luminance of Loff5 2. Surface luminance is luminance value at point 5 across the LCD surface 50cm from the surface with a ll pixels displaying white. From more information see FIG 2. When LED current IF = typical value (without driver board), LED input VDDB =24V, IDDB. = Typical value (with driver board), LWH=Lon5 where Lon5 is the luminance with all pixels displaying white at center 5 location. 3. The variation in surface luminance, δWHITE is defined (center of Screen) as: δWHITE(9P)= Maximum(Lon1, Lon2,…,L on9)/ Minimum(Lon1, Lon2,…L on9) 4. Response time T is the average time required for display transition by sw i t ch i n g t h e i n p u t s i g n a l f o r f i v e luminance ratio (0%,25%,50%,75%,100% brightness mat rix) and is based on Fv=60Hz to optimize. Target Measured Response Time 0% 25% 50% 75% 100% 0% 0 % t o 2 5 % 0 % t o 5 0 % 0 % t o 7 5 % 0 % t o 1 0 0 % 25% 25% to 0% 25% to 50% 25% to 75% 25% to 100% 50% 50% to 0% 50% to 25% 5 0 % t o 7 5 % 50% to 100% 75% 75% to 0% 75% to 25% 75% to 50% 7 5 % t o 1 0 0 % Start 100% 100% to 0% 100% to 25% 100% to 50% 100% to 75% T is determined by 10% to 90% brightness difference of rising or falling period. (As illustrated) The response time is defined as the following figur e and shall be measured by switching the input sign al for “any level of grey(bright) “ and “any level of gray(dark)”. Any level of gray (Bright) Any level of gr ay (Dark) Any level of gray (Bright) T (R) Photodetector Output Time T (F) 100% 90% 10%
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 21 / 31 FIG. 2 Luminance 5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determine d for the horizontal or x axis and the vertical or y axis wit h respect to the z axis which is normal to the LCD surface. For more information see FIG3. FIG.3 Viewing Angle 1 2 3 4 5 6 7 8 H V H/6 H/2 V/2 V/6
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 22 / 31 5. Mechanical Characteristics The contents provide general mechanical characteristics for the model T315HW07 V8. In addition the figures in the next page are detailed mechanical drawing of the LCD. Item Dimension Unit Note Horizontal 735.4.0 mm Vertical 433.0 mm Depth (Dmin) 10.8 mm to rear Outline Dimension Depth (Dmax) 25.9 mm to Driver Board cover Weight 5600 g
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 23 / 31 Front View
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 24 / 31 Back View
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 25 / 31 6. Reliability Test Items Test Item Q’ty Condition
1 High temperature storage test 3 60
, 300hrs
2 Low temperature storage test 3 -20
, 300hrs
3 High temperature operation test 3 50
, 300hrs
4 Low temperature operation test 3 -5
, 300hrs
5 Vibration test (non-operation) 3
Wave form: random Vibration level : 1.0G RMS Bandwidth : 10-300Hz Duration : X,Y,Z 10min per axis X,Y,Z: Horizontal, face up
6 Shock test (non-operation) 3
50G ,20ms ±X,Y ,Z axis Waveform: half sine wave Direction: One time each direction
7 Vibration test (With carton) 5
Random wave (1.05Grms 10~200Hz) Duration : X,Y,Z 10min per axis
8 Drop test (With carton) 5
Height: 30.5 cm (ASTMD4169-I) 1 corner, 3 edges, 6 surfaces (refer ASTM D 5276)
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 26 / 31 7. International Standard
7.1 Safety
(1) UL 60950-1, UL 60065; Standard for Safety of In formation Technology Equipment Including electrical Business Equipment. (2) IEC 60950-1 : 2001, IEC 60065:2001 ; Standard f or Safety of International Electrotechnical Commission (3) EN 60950 : 2001+A11, EN 60065:2002+A1:2006; Eur opean Committee for Electrotechnical Standardization (CENELEC), EUROPEAN STANDARD for Sa fety of Information Technology Equipment Including Electrical Business Equipment.
7.2 EMC
(1) ANSI C63.4 “Methods of Measurement of Radio-Noi se Emissions from Low-Voltage Electrical and Electrical Equipment in the Range of 9kHz to 40GHz. “American National standards Institute(ANSI), 1992 (2) C.I.S.P .R “Limits and Methods of Measurement of R a d i o I n t e r f a c e C h a r a c t e r i s t i c s o f I n f o r ma t i o n Technology Equipment.” International Special committee on Radio Interference. (3) EN 55022 “Limits and Methods of Measurement of Radio Interface Characteristics of Information Technology Equipment.” European Committee for Elect rotechnical Standardization. (CENELEC), 1998
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 27 / 31 8. Packing 8-1 DEFINITION OF LABEL: A. Panel Label: *xxxxxxxxxxxx-xxxx* Green mark description (1) For Pb Free Product, AUO will add f o r i d e n t i f i c a t i o n . (2) For RoHs compatible products, AUO will add RoHS for identification. Note: The green Mark will be present only when the green documents have been ready by AUO internal gre en team. (definition of green design follows the AUO green design checklist.) B. Carton Label: T315HW07 V/g715 97.31T14.800 QTY : 5 AU Optronics Panel Unique ID AUO Internal Use Year XXXXX Model NO: T315HW07 V.8 XX XXXXX Manufactured XX/XX M A D E IN XXXXX AUO Internal Use Week Factory Location AUO Internal Use
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 28 / 31 8-2 PACKING METHODS: 5pcs Modules 1pc Module/ESD Bag Module Cushion set ” H ” Tape Panel upside down
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 29 / 31 8-3 Pallet and Shipment Information Specification Item Qty. Dimension Weight (kg) Packing Remark
1 Packing BOX 5pcs/box 828(L)mm*283(W)mm*536(H)mm 3 7
2 Pallet 1 1150(L)mm*840(W)mm*132(H)mm 13
3 Boxes per Pallet 8 boxes/pallet
4 Panels per Pallet 40pcs/pallet
N/A 1150(L)mm*840(W)mm*1204(H)mm 309 Stretch film Label Corner angle PET band Moisture-proof filmCorner angle Pallet
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 30 / 31 9. PRECAUTIONS Please pay attention to the followings when you use this TFT LCD module. 9-1 MOUNTING PRECAUTIONS (1) You must mount a module using holes arranged in four corners or four sides. (2) You should consider the mounting structure so t hat uneven force (ex. twisted stress) is not applied to module. And the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module. (3) Please attach the surface transparent protectiv e plate to the surface in order to protect the polarizer. Transparent protective plate should have sufficient strength in order to the resist external force. (4) You should adopt radiation structure to satisfy the temperature specification. (5) Acetic acid type and chlorine type materials for the cover case are not desirable because the form er generates corrosive gas of attacking the polarizer at high temperature and the latter cause circuit broken by electro-chemical reaction. (6) Do not touch, push or rub the exposed polarizer with glass, tweezers or anything harder than HB pencil lead. And please do not rub with dust clothe s with chemical treatment. Do not touch the surface of polarizer for bare hand or greasy cloth. (Some cosmetics are detrimental to the polarizer.) (7) When the surface becomes dusty, please wipe gen tly with absorbent cotton or other soft materials like chamois soaks with petroleum benzene. Normal-h exane is recommended for cleaning the adhesives used to attach front/ rear polarizer. Do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) Wipe off saliva or water drops as soon as possi ble. Their long time contact with polarizer causes deformations and color fading. (9) Do not open the case because inside circuits do not have sufficient strength. 9-2 OPERATING PRECAUTIONS (1) The device listed in the product specification sheets was designed and manufactured for TV application (2) The spike noise causes the mis-operation of cir cuits. It should be lower than following voltage: V=±200mV(Over and under shoot voltage) (3) Response time depends on the temperature. (In l ower temperature, it becomes longer..) (4) Brightness of CCFL depends on the temperature. (In lower temperature, it becomes lower.) And in lower temperature, response time (required time tha t brightness is stable after turned on) becomes longer. (5) Be careful for condensation at sudden temperatu re change. Condensation makes damage to polarizer or electrical contacted parts. And after fading condensation, smear or spot will occur. (6) When fixed patterns are displayed for a long ti me, remnant image is likely to occur. (7) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference sha ll
T315HW07 V8 Product Specification Rev.2.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 31 / 31 be done by system manufacturers. Grounding and shielding methods may be important to minimize the interface. 9-3 ELECTROSTATIC DISCHARGE CONTROL Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that treatment persons are connected to ground thro ugh wristband etc. And don’t touch interface pin directly. 9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE Strong light exposure causes degradation of polarizer and color filter. 9-5 STORAGE When storing modules as spares for a long time, the following precautions are necessary. (1) Store them in a dark place. Do not expose the m odule to sunlight or fluorescent light. Keep the temperature between 5 and 35 at normal humidity. (2) The polarizer surface should not come in contac t with any other object. It is recommended that they be stored in the container in which they were shipped. 9-6 HANDLING PRECAUTIONS FOR PROTECTION FILM (1) The protection film is attached to the bezel wi th a small masking tape. When the protection film i s peeled off, static electricity is generated between the film and polarizer. This should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) When the module with protection film attached i s stored for a long time, sometimes there remains a very small amount of glue still on the bezel after the protection film is peeled off. (3) You can remove the glue easily. When the glue r emains on the bezel or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane.