T260XW04V7 AUO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 29
Technical content
Datasheet sections
- 1 GENERAL DESCRIPTION
- 2 ABSOLUTE MAXIMUM RATINGS
- 3 ELECTRICAL SPECIFICATION
- 4 OPTICAL SPECIFICATION
- 5 MECHANICAL CHARACTERISTICS
- 6 RELIABILITY TEST ITEMS
- 7 INTERNATIONAL STANDARD
- 8 PACKING
- 9 PRECAUTION
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 1 / 29 Model Name: T260XW04 V7 Issue Date : 2009/10/14 (＊＊ ＊＊) Preliminary Specifications ( ) Final Specifications Customer Signature Date AUO Date Approved By Approval By PM Director Frank Hsu Reviewed By RD Director Eugene CC Chen Reviewed By Project Leader Polo Shen Note Prepared By PM Derek Teng Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 3 / 29 Record of Revision Version Date Page Description 0.0 2009/10/13 First release Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 4 / 29 1. General Description This specification applies to the 26.0 inch Color T FT-LCD Module T260XW04 V7. This LCD module has a TF T active matrix type liquid crystal panel 768x1366 pi xels, and diagonal size of 26.0 inch. This module s upports 768x1366 mode. Each pixel is divided into Red, Gree n and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot. The T260XW04 V7 has been designed to apply the 8-bi t 1 channel LVDS interface method. It is intended t o support displays where high brightness, wide viewin g angle, high color saturation, and high color dept h are very important. * General Information Items Specification Unit Note Active Screen Size 26.00 inch Display Area 575.769 (H) x 323.712(V) mm Outline Dimension 626.0 (H) x 373.0 (V) x 43.5(D) m m With inverter Driver Element a-Si TFT active matrix Display Colors 8 bit, 16.7M Colors Number of Pixels 768 x1366 Pixel Pixel Pitch 0.4215 (H) x 0.4215(W) mm Pixel Arrangement RGB vertical stripe Display Operation Mode Normally Black Surface Treatment Anti-Glare, 3H Haze=13% Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 5 / 29 2. Absolute Maximum Ratings The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit Item Symbol Min Max Unit Conditions Logic/LCD Drive Voltage Vcc -0.3 14 [Volt] Note 1 Input Voltage of Signal Vin -0.3 4 [Volt] Note 1 Operating Temperature TOP 0 +50 [ oC] Note 2 Operating Humidity HOP 10 90 [%RH] Note 2 Storage Temperature TST -20 +60 [ oC] Note 2 Storage Humidity HST 10 90 [%RH] Note 2 Panel Surface Temperature PST 65 [ oC] Note 3 Note 1: Duration: 1sec. Note 2 : Maximum Wet-Bulb should be 39 and No conde nsation. The relative humidity must not exceed 90% non-conde nsing at temperatures of 40 or less. At temperature s ℃ greater than 40 , the wet bulb temperature must not exceed 39 .℃ ℃ Note 3: Surface temperature is measured at 50 ℃ Dry condition Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 6 / 29 3. Electrical Specification The T260XW04 V7 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The second input for BLU is to power inverter.
3.1 Electrical Characteristics
Min. Typ. Max Unit Note LCD Power Supply Input Voltage (12V model) V DD 10.8 12 13.2 V DC 1 Power Supply Input Current (by Product define) I DD 0.27 0.35 A 2 Power Consumption (by Product define) P C 3.24 4.2 Watt 2 Inrush Current (by Product define) I RUSH 3.0 A 3 Differential Input High Threshold Voltage VTH -- -- +100 4 4 Differential Input Low Threshold Voltage V TL -100 -- -- 4 4 LVDS Interface Input Common Mode Voltage V ICM 1.1 1.25 1.4 V DC 4 Input High Threshold Voltage VIH (High) 2.7 -- 3.3 V DC CMOS Interface Input Low Threshold Voltage V IL (Low) 0 -- 0.6 V DC Backlight Power Consumption (Refer to Section: 3.7) P BL 45 47 49 Watt Life Time 50000 -- Hours 5 Note : 1. The ripple voltage should be controlled under 10% of V CC 2. Test Condition: (1) V DD = 12.0V (2) Fv = 60Hz (3) F CLK = 80MHz (4) Temperature = 25 ℃ (5) Test Pattern : White Pattern 3. Measurement condition : Rising time = 400us Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 7 / 29 GND GND GND GND VV VV DD DD DD DD 10% 90% 400 400 400 400 sµ 4. VICM = 1.25V VV VV TH TH TH TH VV VV ICM ICM ICM ICM VV VV TL TL TL TL 00 00VV VV 5. Specified values are for a single lamp only which is aligned horizontally. The lifetime is defined as the time which luminance of the lamp is 50% compared to its original value. [Operating condition: Continuous operating at Ta = 25±2 ℃ ] Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 8 / 29
3.2 Interface Connections
/circle6 LCD connector: CN1: P-TWO 196282-30041 /circle6 Mating connector: Pin no Function Description
1 Reserved AUO Internal Use Only
2 SCL EEPROM Serial Clock
3 SDA EEPROM Serial Data
4 GND Ground
5 CH1_0- LVDS Channel 1, Signal 0-
6 CH1_0+ LVDS Channel 1, Signal 0+
7 GND Ground
8 CH1_1- LVDS Channel 1, Signal 1-
9 CH1_1+ LVDS Channel 1, Signal 1+
10 GND Ground
11 CH1_2- LVDS Channel 1, Signal 2-
12 CH1_2+ LVDS Channel 1, Signal 2+
13 GND Ground
14 CH1_CLK- LVDS Channel 1, Clock -
15 CH1_CLK+ LVDS Channel 1, Clock +
16 GND Ground
17 CH1_3- LVDS Channel 1, Signal 3-
18 CH1_3+ LVDS Channel 1, Signal 3+
19 GND Ground
20 NC No Connect
21 LVDS_SEL Open/High(3.3V) for NS, Low(GND) for JEIDA 22 WP EEPROM Write Protection ,High(3.3V) for Writable,Low(GND) for Protection
23 GND Ground
24 GND Ground
25 GND Ground
26 VDD Power Supply, +12V DC Regulated
27 VDD Power Supply, +12V DC Regulated
28 VDD Power Supply, +12V DC Regulated
29 VDD Power Supply, +12V DC Regulated
30 VDD Power Supply, +12V DC Regulated
Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 9 / 29 LVDS Option = High/Open /barb4right/barb4right/barb4right/barb4rightNS BB BB 22 22N A N A N A N A D E D E D E D E D E D E D E D E BB BB 22 22BB BB 33 33 BB BB 44 44BB BB 55 55N A N A N A N A BB BB 33 33 RR RR 00 00RR RR 55 55 GG GG 00 00GG GG 00 00RR RR 00 00RR RR 11 11 RR RR 22 22RR RR 33 33RR RR 44 44 RR RR 11 11 GG GG 11 11BB BB 00 00 BB BB 11 11BB BB 11 11GG GG 11 11GG GG 22 22 GG GG 33 33GG GG 44 44GG GG 55 55 GG GG 22 22 C lock C lock C lock C lock C Hx C Hx C Hx C Hx __ __ 00 00 ++ ++ C Hx C Hx C Hx C Hx __ __ 00 00 -- -- C Hx C Hx C Hx C Hx __ __ 11 11 ++ ++ C Hx C Hx C Hx C Hx __ __ 11 11 -- -- C Hx C Hx C Hx C Hx __ __ 22 22 ++ ++ C Hx C Hx C Hx C Hx __ __ 22 22 -- -- C Hx C Hx C Hx C Hx __ __ 33 33 ++ ++ C Hx C Hx C Hx C Hx __ __ 33 33 -- -- RR RR 66 66BB BB 77 77 N A N A N A N A N A N A N A N A RR RR 66 66RR RR 77 77 GG GG 66 66GG GG 77 77BB BB 66 66 RR RR 77 77 P revious Cycle Current C ycle Next C ycle P revious Cycle Current C ycle Next C ycle P revious Cycle Current C ycle Next C ycle P revious Cycle Current C ycle Next C ycle LVDS Option = Low /barb4right/barb4right/barb4right/barb4rightJEIDA BB BB 44 44N A N A N A N A D E D E D E D E D E D E D E D E BB BB 44 44BB BB 55 55 BB BB 66 66BB BB 77 77N A N A N A N A BB BB 55 55 RR RR 22 22RR RR 77 77 GG GG 22 22GG GG 22 22RR RR 22 22RR RR 33 33 RR RR 44 44RR RR 55 55RR RR 66 66 RR RR 33 33 GG GG 33 33BB BB 22 22 BB BB 33 33BB BB 33 33GG GG 33 33GG GG 44 44 GG GG 55 55GG GG 66 66GG GG 77 77 GG GG 44 44 Clock Clock Clock Clock RR RR 00 00BB BB 11 11 N A N A N A N A N A N A N A N A RR RR 00 00RR RR 11 11 GG GG 00 00GG GG 11 11BB BB 00 00 RR RR 11 11 C Hx C Hx C Hx C Hx __ __ 00 00 ++ ++ C Hx C Hx C Hx C Hx __ __ 00 00 -- -- C Hx C Hx C Hx C Hx __ __ 11 11 ++ ++ C Hx C Hx C Hx C Hx __ __ 11 11 -- -- C Hx C Hx C Hx C Hx __ __ 22 22 ++ ++ C Hx C Hx C Hx C Hx __ __ 22 22 -- -- C Hx C Hx C Hx C Hx __ __ 33 33 ++ ++ C Hx C Hx C Hx C Hx __ __ 33 33 -- -- P revious C ycle C urrent C ycle N ext Cycle P revious C ycle C urrent C ycle N ext Cycle P revious C ycle C urrent C ycle N ext Cycle P revious C ycle C urrent C ycle N ext Cycle Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 10 / 29
3.3 Signal Timing Specification
This is the signal timing required at the input of the user connector. All of the interface signal tim ing should be satisfied with the following specifications for its proper operation. Timing Table Signal Item Symbol Min. Typ. Max Unit Vertical Section Period Tv 784 810 1015 Th Active Tdisp (v) 768 Th Blanking Tblk (v) 16 42 247 Th Period Th 1460 1648 2000 Tclk Active Tdisp (h) 1366 Tclk Horizontal Section Blanking Tblk (h) 94 282 634 Tclk Clock Frequency Fclk=1/Tclk 50 80 86 MHz Vertical Frequency Frequency Fv 47 60 63 Hz Horizontal Frequency Frequency Fh 43 48 53 KHz Notes: (1) Display position is specific by the rise of DE signal only. Horizontal display position is specified by the rising edge of 1 st DCLK after the rise of 1 st DE, is displayed on the left edge of the screen. (2)Vertical display position is specified by the ri se of DE after a “Low” level period equivalent to e ight times of horizontal period. The 1 st data corresponding to one horizontal line after the rise of 1 st DE is displayed at the top line of screen. (3)If a period of DE “High” is less than 1366 DCLK or less than 768 lines, the rest of the screen displays black. (4)The display position does not fit to the screen if a period of DE “High” and the effective data per iod do not synchronize with each other. Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 11 / 29
3.4 Signal Timing Waveforms
Tdisp(v) Tblk(v) Tv DE RGB Data Line N Invalid DataInvalid Data Line Line Line Line N Line Tclk CLK DE CH1 Pixel M-3 Pixel M-2 Pixel M-1 Pixel MInvalid DataPixel Pixel Pixel Pixel Pixel Pixel Pixel M-2 Pixel M-1 Pixel MInvalid DataPixel Pixel Th Tdisp(h) Tblk(h) MMMM ppppiiiixxxxeeeellll N L in e N L in e N L in e N L in e Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 12 / 29
3.5 Color Input Data Reference
The brightness of each primary color (red, green and blue) is based on the 8 bit gray scale data input for the color; the higher the binary input, the brighter the color. The table below provides a reference for color versus data input. COLOR DATA REFERENCE Input Color Data RED MSB LSB GREEN MSB LSB BLUE MSB LSB Color R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Basic Color White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 RED(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 RED(001) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ---- RED(254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R RED(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GREEN(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GREEN(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 ---- GREEN(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 G GREEN(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 BLUE(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 BLUE(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ---- BLUE(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 B BLUE(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 13 / 29
3.6 Power Sequence for LCD
Min. Type. Max. Unit t1 0.4 --- 30 ms t2 0.1 --- --- ms t3 200 --- --- ms t4 0 --- --- ms t5 0 --- --- ms t6 --- --- --- ms t7 500 --- --- ms Note: (1) T4=0 : concern for residual pattern before BLU turn off. (2) T6 : voltage of VDD must decay smoothly after power-off. (customer system decide this value) (3) T2b : customer decide this value Power Supply For LCD VDD (+12V) Interface Signal (LVDS Data & CLK) Backlight on/off control signal (VBLON) 10% 90% 10% t3 t4 10% t5 t6 10% 90% 10% Valid Data GND GND Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 14 / 29
3.7 Backlight Specification (Inverter Type)
The backlight unit contains 4U type CCFLs (Cold Ca thode Fluorescent Lamp)
3.7.1 Electrical specification
Note 1 : Dimming ratio= 100% (MAX) （ Ta=25±5 , Turn on for 45minutes℃ ） Note 2: Measurement condition Rising time = 20ms (V DDB : 10%~90%); Note 3: Less than10% dimming control is functional well and no backlight shutdown happened Spec Item Symbol Condition Min Typ Max Unit Note 1 Input Voltage VDDB - 21.6 24 26.4 VDC -
2 Input Current I DDB VDDB=24
V 1.78 1.96 2.18 ADC 1
3 Input Power P DDB VDDB=24
4 Inrush Current I RUSH VDDB=24
V - - 3.6 ADC 2 ON 2 - 5.5 -
5 On/Off control
VDDB=24 V -0.3 - 0.8 VDC
6 On/Off control
current IBLON VDDB=24 V - - 1.5 mA - MAX 3.1 - 3.3 VDC -
7 Dimming Control
Voltage V_DIM MIN VDDB=24 V - 0 - VDC -
8 Dimming Control
Current I_DIM VDDB=24 V - - 2 mADC -
9 Internal Dimming
Ratio DIM_R VDDB=24 V 10 - 100 % 3 MAX VDDB=24 V 2 - 3.3 -
10 External PWM
V_EPW M MIN VDDB=24 V -0.3 - 0.8 VDC
11 External PWM
Control Current I_EPWM VDDB=24 V - - 2 mADC -
12 External PWM Duty
ratio D_EPWM VDDB=24 V 5 - 100 % 3
13 External PWM
Frequency F_EPWM VDDB=24 V 140 180 240 Hz - Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 15 / 29
3.7.2 Input Pin Assignment
Inverter Connector: CI0114M1HRL-NH (Cvilux) (Note*) IF External PWM function includes 10% dimming ratio. Judge condition as below: (1) Backlight module must be lighted ON normally. (2) All protection function must work normally. (3) Uniformity and flicker could NOT be guaranteed Pin No Symbol Description
1 VDDB Operating Voltage Supply, +24V DC regulated
2 VDDB Operating Voltage Supply, +24V DC regulated
3 VDDB Operating Voltage Supply, +24V DC regulated
4 VDDB Operating Voltage Supply, +24V DC regulated
5 VDDB Operating Voltage Supply, +24V DC regulated
6 BLGND Ground and Current Return
7 BLGND Ground and Current Return
8 BLGND Ground and Current Return
9 BLGND Ground and Current Return
10 BLGND Ground and Current Return
11 DET (27) BLU status detection:
Normal : 0~0.8V ; Abnormal : Open collector
12 VBLON
BL On-Off control: High/Open (2.0V~5.5V) for BL On, Low (GND) for off Internal PWM (26) (VDI Internal PWM (0~3.1V,10~100% Duty) < NC ; when External PWM mode> (29) External PWM (28)(PDI External PWM (5%~100% Duty ratio) < NC ; when internal PWM mode> (29) Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 16 / 29
3.7.3 Power Sequence for Inverter (Refer to INV/ BB/LIPS)
(VDDB) Dimming Control Signal (VDIM) BLU On/Off Enable (VBLON) 24V(typ.) 10% 90% 90% T1 T2 T3 T4 Power Input for BLU (VDDB) Dimming Control Signal (VDIM) BLU On/Off Enable (VBLON) 24V(typ.) 10% 90% 90% T1 T2 T3 T4 T4 Dip condition for Inverter Power Input for BLU (VDDB) T6 VDDB(typ.)*0.8 Power Input for BLU (VDDB) T6 VDDB(typ.)*0.8 Value Parameter Min Typ Max Units T1 20 - - ms T2 500 - - ms T3 250 - - ms T4 0 - - ms T5 1 - - ms T6 - - 10 ms Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 17 / 29 4. Optical Specification Optical characteristics are determined after the un it has been ‘ON’ and stable for approximately 45 mi nutes in a dark environment at 25° C. The values specified are at an approximate distance 50cm from the LCD surfac e at a viewing angle of φ and θ equal to 0° . Fig.1 presents additional information concerning the measurement equipment and method. Values Parameter Symbol Min. Typ. Max Unit Notes Contrast Ratio CR 2400 3000 -- 1 Surface Luminance (White) L WH 350 420 -- cd/m 2 2 Luminance Variation δWHITE(9P) -- -- 1.3 3 Response Time (G to G) T γ -- 6.5 -- Ms 4 Color Gamut NTSC 72 % Color Coordinates Red R X 0.640 R Y 0.330 Green G X 0.281 G Y 0.590 Blue B X 0.150 B Y 0.050 White W X 0.280 W Y Typ.-0.03 0.290 Typ.+0.03 Viewing Angle 5 x axis, right( φ=0° ) θr -- 89 -- degree x axis, left( φ=180° ) θl -- 89 -- degree y axis, up( φ=90° ) θu -- 89 -- degree y axis, down ( φ=270° ) θd -- 89 -- degree SR3 or equivalent Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 18 / 29 Note: 1. Contrast Ratio (CR) is defined mathematically as: Surface Luminance of Lon5 Contrast Ratio= Surface Luminance of Loff5 2. Surface luminance is luminance value at point 5 across the LCD surface 50cm from the surface with a ll pixels displaying white. From more information see FIG 2. When lamp current I H = 11mA. L WH =Lon5 where Lon5 is the luminance with all pixels displaying white at center 5 location. 3. The variation in surface luminance, δWHITE is defined (center of Screen) as: δWHITE(9P) = Maximum(L on1 , L on2 ,…,L on9 )/ Minimum(L on1 , L on2 ,…L on9 ) 4. Response time Tγ is the average time required for display transition by switching the input signal for five luminance ratio (0%,25%,50%,75%,100% brightness matrix) and is based on Fv=60Hz to optimize. Target Measured Response Time 0% 25% 50% 75% 100% 0% 0% to 25% 0% to 50% 0% to 75% 0% to 100% 25% 25% to 0% 25% to 50% 25% to 75% 25% to 100% 50% 50% to 0% 50% to 25% 50% to 75% 50% to 100% 75% 75% to 0% 75% to 25% 75% to 50% 75% to 100% Start 100% 100% to 0% 100% to 25% 100% to 50% 100% to 75% 4. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determine d for the horizontal or x axis and the vertical or y axis wit h respect to the z axis which is normal to the LCD surface. For more information see FIG4. FIG. 2 Luminance 1 2 3 4 5 6 7 8 H V H/6 H/2 V/2 V/6 Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 19 / 29 FIG.3 Response Time The response time is defined as the following figur e and shall be measured by switching the input sign al for “any level of grey(bright) “ and “any level of gray(dark )”. Any level of gray (Bright) Any level of gr ay (Dark) Any level of gray (Bright) Tγγ γγ (R) Photodetector Output Time Tγγ γγ (F) FIG.4 Viewing Angle Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 20 / 29 5. Mechanical Characteristics The contents provide general mechanical characteristics for the model T260XW05 V0. In addition the figures in the next page are detailed mechanical drawing of the LCD. Horizontal 626.0 mm Vertical 373.0 mm Outline Dimension Depth 43.5 mm (to inverter cover) Horizontal 580.8 mm Bezel Opening Vertical 328.8 mm Horizontal 575.769mm Active Display Area Vertical 323.712 mm Weight 3354g (Typ.) Surface Treatment Anti-Glare, 3H Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 21 / 29 Front View Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 22 / 29 Back View Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 23 / 29 6. Reliability Test Items Test Item Q’ty Condition
1 High temperature storage test 3 60 ℃ , 300hrs
2 Low temperature storage test 3 -20 ℃ , 300hrs
3 High temperature operation test 3 50 ℃ , 300hrs
4 Low temperature operation test 3 -5 ℃ , 300hrs
5 Vibration test (non-operation) 3
(10~300Hz/1.5G/11min SR, XYZ 30,im/axis) Vibration level : 1.5G RMS, Bandwidth: 10-300Hz Duration: X, Y , Z 30min
6 Shock test (non-operation) 3
Shock level: 50G Waveform: half since wave, 11ms Direction: ±X, ±Y, ±Z, One time each direction
7 Vibration test (With carton) 3
Random wave (1.5G RMS, 10-200Hz) 30mins/ Per each X,Y ,Z axes
8 Drop test (With carton) 3
Height: 46 m 1 corner, 3 edges, 6 surfaces (ASTMD4169-I) Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 24 / 29 7. International Standard
7.1 Safety
(1) UL 60950-1, UL 60065; Standard for Safety of In formation Technology Equipment Including electrical Business Equipment. (2) IEC 60950-1 : 2001, IEC 60065:2001 ; Standard f or Safety of International Electrotechnical Commission (3) EN 60950 : 2001+A11, EN 60065:2002+A1:2006; Eur opean Committee for Electrotechnical Standardization (CENELEC), EUROPEAN STANDARD for Sa fety of Information Technology Equipment Including Electrical Business Equipment.
7.2 EMC
(1) ANSI C63.4 “Methods of Measurement of Radio-Noi se Emissions from Low-Voltage Electrical and Electrical Equipment in the Range of 9kHz to 40GHz. “American National standards Institute(ANSI), 1992 (2) C.I.S.P .R “Limits and Methods of Measurement of Radio Interface Characteristics of Information Technology Equipment.” International Special committee on Radio Interference. (3) EN 55022 “Limits and Methods of Measurement of Radio Interface Characteristics of Information Technology Equipment.” European Committee for Elect rotechnical Standardization. (CENELEC), 1998 Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 25 / 29 8. Packing 8-1 DEFINITION OF LABEL: A. Panel Label: *xxxxxxxxxxxx -xxxx * Green mark description (1) For Pb Free Product, AUO will add for identification. (2) For RoHs compatible products, AUO will add RoHS for identification. Note: The green Mark will be present only when the green documents have been ready by AUO internal gre en team. (definition of green design follows the AUO green design checklist.) B. Carton Label: T260XW04 VX 97.26TXX.XXX QTY : 5 AU Optronics XXXXX MADE IN XXXXX Manufactured XX /XX XXXXXXX Model NO: T260XW04 V0 AUO Internal Use Week Year Panel Unique ID AUO Internal Use Factory Location 格格 格格 式化 式化式化式化 :: :: 字型: 粗體 格格 格格 式化 式化式化式化 :: :: 字型: (英文)Verdana , (中文) MS Gothic 格格 格格 式化 式化式化式化 :: :: 字型: (英文)Verdana Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 26 / 29 8-2 PACKING METHODS: 1p cs M od ul e / ES D B ag 1p cs M od ul e / ES D B ag 1p cs M od ul e / ES D B ag 1p cs M od ul e / ES D B ag Modul e 55 55 p c s / 1 ca r to n p c s / 1 ca r to n p c s / 1 ca r to n p c s / 1 ca r to n ” H ” T ape Cu shi o n set Cu shi o n set Cu shi o n set Cu shi o n set Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 27 / 29 8-3 Pallet and Shipment Information Specification Item Qty. Dimension Weight (kg) Packing Remark
1 Packing BOX 5pcs/box 722(L)*325(W)*438(H) 26
2 Pallet 1 980(L)*740(W)*135(H) 16
3 Boxes per Pallet 6 boxes/pallet
4 Panels per Pallet 30pcs/pallet
Pallet after packing 66 980(L)*740(W)*1011(H) 150 Stretch film Label Corner angle PET band Moisture-proof film Corner angle Pallet Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 28 / 29 9. PRECAUTIONS Please pay attention to the followings when you use this TFT LCD module. 9-1 MOUNTING PRECAUTIONS (1) You must mount a module using holes arranged in four corners or four sides. (2) You should consider the mounting structure so t hat uneven force (ex. twisted stress) is not applied to module. And the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module. (3) Please attach the surface transparent protectiv e plate to the surface in order to protect the polarizer. Transparent protective plate should have sufficient strength in order to the resist external force. (4) You should adopt radiation structure to satisfy the temperature specification. (5) Acetic acid type and chlorine type materials for the cover case are not desirable because the form er generates corrosive gas of attacking the polarizer at high temperature and the latter cause circuit broken by electro-chemical reaction. (6) Do not touch, push or rub the exposed polarizer with glass, tweezers or anything harder than HB pencil lead. And please do not rub with dust clothe s with chemical treatment. Do not touch the surface of polarizer for bare hand or greasy cloth. (Some cosmetics are detrimental to the polarizer.) (7) When the surface becomes dusty, please wipe gen tly with absorbent cotton or other soft materials like chamois soaks with petroleum benzene. Normal-h exane is recommended for cleaning the adhesives used to attach front/ rear polarizer. Do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) Wipe off saliva or water drops as soon as possi ble. Their long time contact with polarizer causes deformations and color fading. (9) Do not open the case because inside circuits do not have sufficient strength. 9-2 OPERATING PRECAUTIONS (1) The device listed in the product specification sheets was designed and manufactured for TV application (2) The spike noise causes the mis-operation of cir cuits. It should be lower than following voltage: V=±200mV(Over and under shoot voltage) (3) Response time depends on the temperature. (In l ower temperature, it becomes longer..) (4) Brightness of CCFL depends on the temperature. (In lower temperature, it becomes lower.) And in lower temperature, response time (required time tha t brightness is stable after turned on) becomes longer. (5) Be careful for condensation at sudden temperatu re change. Condensation makes damage to polarizer or electrical contacted parts. And after fading condensation, smear or spot will occur. (6) When fixed patterns are displayed for a long ti me, remnant image is likely to occur. (7) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall Free Datasheet http://www.datasheet4u.com/
T260XW04 V7 Product Specification Rev. 0.0 © Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 29 / 29 be done by system manufacturers. Grounding and shie lding methods may be important to minimize the interface. 9-3 ELECTROSTATIC DISCHARGE CONTROL Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that treatment persons are connected to ground thro ugh wristband etc. And don’t touch interface pin directly. 9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE Strong light exposure causes degradation of polarizer and color filter. 9-5 STORAGE When storing modules as spares for a long time, the following precautions are necessary. (1) Store them in a dark place. Do not expose the m odule to sunlight or fluorescent light. Keep the temperature between 5 and 35 at normal humidity.℃ ℃ (2) The polarizer surface should not come in contac t with any other object. It is recommended that they be stored in the container in which they were shipped. 9-6 HANDLING PRECAUTIONS FOR PROTECTION FILM (1) The protection film is attached to the bezel wi th a small masking tape. When the protection film i s peeled off, static electricity is generated between the film and polarizer. This should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) When the module with protection film attached i s stored for a long time, sometimes there remains a very small amount of glue still on the bezel after the protection film is peeled off. (3) You can remove the glue easily. When the glue r emains on the bezel or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane. Free Datasheet http://www.datasheet4u.com/