9AD0901H12 SANYODENKI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

CATALOG No. C1097B001 '20.1 .IT ACDC Fan 92 mm sq. ACDC Fan 92×92×38 mm San Ace 92AD 9AD type ■ General Specifications

  • Material Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
  • Expected life See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage) Expected life at 40°C is for reference only.
  • Motor structure Brushless DC motor
  • Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 573.
  • Dielectric strength 50/60 Hz, 1500 VAC, for 1 minute (between input terminal and frame, and between sensor output and frame)
  • Insulation resistance

10 MΩ or more with a 500 VDC megger

  • Sound pressure level (SPL) At 1 m away from the air inlet
  • Storage temperature -30 to +75˚C (Non-condensing)
  • Mass 250 g Do not solder wires directly to AC input terminals. ■ Specifications The models listed below have ribs and no sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Operating voltage range Frequency Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [Hz] [A] [W] [min ] [ m³/min] [CFM] [Pa] [inchH²O] [dB (A)] [˚C] [h] The following sensor and control options are available for selection. Available for all models. Pulse sensor The models listed below have ribs and low-speed sensors. For models without ribs, append "1" to the end of model numbers. Model no. Rated voltage Operating voltage range Frequency Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life [V] [V] [Hz] [A] [W] [min ] [ m³/min] [CFM] [Pa] [inchH²O] [dB (A)] [˚C] [h] The following sensor and control options are available for selection. Available for all models. Pulse sensor The mark indicates Short Lead Time Service applicable models. See p. 626 for details. ■ Set Models Fan, finger guard, plug cord, screws, etc. can be purchased in one package. For details, please refer to p. 627 . Order no. Set items Fan Voltage Low-speed sensor Plug cord Finger guards Mounting screws ST1-9AD0901H12 9AD0901H12 100 to 240 V 489-1635-L10 109-099E M4×55 mm (4 screws)ST1-9AD0901M12 9AD0901M12 489-1635-L10 109-099E ST1-9AD0901H1H 9AD0901H1H ◯ 489-1635-L10 109-099E ST1-9AD0901M1H 9AD0901M1H ◯ 489-1635-L10 109-099E

CATALOG No. C1097B001 '20.1 .IT 100～240 V 50/60 Hz 静圧 風量 (inch H2O) (CFM) (m3/min) (Pa) 0 0.4 0.8 1.2 1.6 100 10 0 20 30 40 50 0.1 0.2 0.3 0.4 100～240 V 50/60 Hz 静圧 風量 (inch H2O) (CFM) (m3/min) (Pa) 0 0.4 0.8 1.2 1.6 10 0 20 30 40 50 0.05 0.10 0.15 0.20 9AD0901M12, 9AD0901M1H9AD0901H12, 9AD0901H1H 回転方向 風吹出方向 取付用穴 38±0.5 (4) (4)82.5±0.3 92±0.5 4-ø4.3±0.3 82.5±0.3 92±0.5 回転方向 風吹出方向 リード線 AWG24 UL 1007 4-ø4.3±0.3 取付用穴 コネクタ： Tyco Electronics 171822-2 （Pin.1 センサ出力：黄色 Pin.2 -：黒色） コンタクト：Tyco Electronics 170262-1 ※装置側のコネクタ・コンタクトは以下を推奨いたします。 コネクタ：Tyco Electronics 172211-2 コンタクト：Tyco Electronics 170376-1 100±10 82.5±0.3 92±0.5 38±0.5 (4) (4) 82.5±0.3 92±0.5 AC ACDC Fan 92 mm sq. Static pressure Static pressure Airflow Airflow 100 to 240 V 50/60 Hz 100 to 240 V 50/60 Hz ■ Airflow - Static Pressure Characteristics without Sensor with Low-speed sensor Rotating direction Mounting hole Mounting hole Airflow direction Rotating direction Airflow direction Lead wire AWG24 UL 1007 Connector: T yco Electronics 171822-2 (Pin1 S ensor output: Yellow Pin2 -: Black) Contact: Tyco Electronics 170262-1 * R ecommended connectors and contacts are listed below. Connector: Tyco Electronics 17221 1-2 Contact: Tyco Electronics 170376-1 ■ Dimensions (unit: mm) (With ribs)

CATALOG No. C1097B001 '20.1 .IT 4-ø4.54-ø4.5 ø105 90.5 90.5 ø97 82.5±0.3 82.5±0.3 82.5±0.3 82.5±0.3 90.5 90.5 ACDC Fan 92 mm sq. VCE=+27.6 VDC max. Ic=10 mA max. [VCE (SAT)=1.0 V max.] Sensor scheme HH L Fan power Fan speed Trip point Sensor output Startup delay Detection delay Example 2: when the rotor is locked when the fan motor is turned on and released after the start-up delay time. HH L Fan power Fan speed Trip point Sensor output Startup delay Detection delay Example 1: when steady running VCE (SAT)=1.0 V max. Typical standard model: 9AD0901H1H Output circuit: Open collector Inside of DC fan Pull-up resistor Pull-up voltage +27.6 VDC max. Photocoupler ○ － Ic=10 mA max.Sensor Sensor output (VCE) 9AD0901M1H Startup delay: 36±3 s Detection delay: 3 s max. Trip point: 850 min 9AD0901H1H Startup delay: 18±3 s Detection delay: 3 s max. Trip point: 1700 min ■ Specifications for Low-speed Sensors Inlet side Outlet side ■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) FAN FAN Photocoupler Yellow Black 10 mA max. +27.6 V max. Senser output GND (0 V) AC power supply AC power supply Pull-up resistor ■ Wiring Diagram without Sensor with Low-speed sensor

CATALOG No. C1097B001 '20.1 .IT AC ACDC Fan 92 mm sq. ■ Options Finger guards page: p. 558 Resin finger guards page: p. 565 Model no.: 109-099C, 109-099E, 109-099H Model no.: 109-1001G Resin filter kits page: p. 566 Plug cord page: p. 569 Model no.: 109-1001F13 (13PPI), 109-1001F20 (20PPI), 109-1001F30 (30PPI), 109-1001F40 (40PPI) Model no.: 489-1 635-L10, 489-1635-L21 Wiring harness for sensor page: p. 569 Model no.: 489-1636 With AC input, the same level of energy saving and long life as a DC fan can be achieved. The maintenance effort can be reduced too. Features of the San Ace 92AD 9AD type ACDC Fan Power consumption comparison Expected life comparison Low power consumption Long life Wide voltage range (Compared with our existing AC fan with equal size.) 0 5 10(W) 3 W 7 W AC fan 109S091 ACDC fan 9AD0901M12 57% reduction AC fan 109S091 ACDC fan 9AD0901M12 Expected life 60000 h at 60°C 2.4times longer 25000 h 25000 hReplacement