DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

  1. MATERIALS : : a) Core : Ferrite Core b) Clip : Copper (a) (e) (b) (f) 1. PART NO. EXPRESSION : (b) Dimension code (c) Type code (a) Series code 2. CONFIGURATION & DIMENSIONS : A SUPERWORLD ELECTRONICS (S) PTE LTD 3. SCHEMATIC : (d) Inductance code : R19 = 185nH (e) Tolerance code : M = ±20%, L = ±15%, K = ±10% PG. 1 9.0 Max. BC 10.0 Max. D 8.76 ± 0.5 E Unit:m/m (d) (f) F : RoHS Compliant A S S P 1 0 0 9 M R 1 9 L F 29.11.2012 SMD Power Choke Coil SSP1009M SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. XXX B E C F D Ø0.8 F 8.76 2-Ø1.17 PCB Layout 5. GENERAL SPECIFICATION : a) Operating temperature: -20°C ~ +125°C b) Storage temperature : 25±5°C c) Wire : 2UEW c) Humidity range : 70% RH Max. S F (c)

SUPERWORLD ELECTRONICS (S) PTE LTD PG. 2 ±15% Inductance L0 ( nH ) 185 6. ELECTRICAL CHARACTERISTICS : SSP1009MR19LF Part No. 80%L0≧ ( A ) Isat @ 25°C 0.64 DCR ( mΩ )±4.6% 7. CHARACTERISTICS CURVES : Irms ( A ) T4 0 ° C△≦(Hz) 100K/1V Test Frequency 29.11.2012 SMD Power Choke Coil NOTE : Specifications subject to change without notice. Please check our website for latest information. 220SSP1009MR22LF 63100K/1V 270SSP1009MR27LF 50100K/1V 335SSP1009MR33LF 40100K/1V 470SSP1009MR47LF 27100K/1V 0.64 0.64 0.64 0.64 100 150 200 250 300 350 400 450 500 0 5 10 15 20 25 30 35 40 45 50 55 60 DC BIA S(A ) INDUCTOR(nH) 100 DC BIAS(A) △T(℃) SSP1009M SERIES

SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 should be covered with solder. More than 90% of the terminal electr ode Preheating seconds Inductance within ±20% of initial value. No disconnection or short circuit. Preheating seconds Humidity Resistance Heat resistance Cold resistance Thermal shock Solder Heat Resistance 150°C 260°C 150°C 230°C Solderability Test 8. RELIABILITY AND TEST CONDITION : 2 hour drying under normal c ondition. After 500 hours in 40±2°C and 90 to 95% humidity , and After 500 hours in 125±5°C and 2 hour drying under normal condition. Temperature (°C) After 10 cycles of following c ondition. After 500 hours in -40±5°C and 2 hour drying under normal condition. Room Temperature Room Temperature +125±5 -40±2 Ste p Within 3 Within 3 Times (min.) 10± 0. 5 seconds Dipping cooling Natural 4±1 seconds Dipping cooling Natural Inductance within ±5% of initial value and Vibration Test Amplitudes. sweep vibration (10~55~10Hz) with 1.52mm P-P After vibration for 1hour, In each of three orientations at appearance shall not break. 29.11.2012 SMD Power Choke Coil NOTE : Specifications subject to change without notice. Please check our website for latest information. The appearance shall not break. Inductance within ±20% of initial value. No disconnection or short circuit. The appearance shall not break. Inductance within ±20% of initial value. No disconnection or short circuit. The appearance shall not break. SSP1009M SERIES

SUPERWORLD ELECTRONICS (S) PTE LTD PG. 5 9. PACKAGING INFORMATION : 29.11.2012 SMD Power Choke Coil NOTE : Specifications subject to change without notice. Please check our website for latest information. PET 210 255 12PET/BOX 220 260 235 PET Size: 255* 210*14m/m QUANTITY: 150PCS/PET BOX SIZE: 260*235* 220m/m QUANTITY: 12PET/BOX P/N SSP1009M Chip/Tray 150pcs Carton 1800pcs (1) Tray Dimension (2) Packaging Quantity SSP1009M SERIES

SUPERWORLD ELECTRONICS (S) PTE LTD a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils. 1. Storage Conditions : To maintain the solderabililty of terminal electrodes : a) Temperature and humidity conditions : Less than 40°C and 70% RH. b) Recommended products should be used within 6 months from the time of delivery. c) The packaging material should be kept where no chlorine or sulfur exists in the air. b) The use of tweezers or vacuum pick up is strongly recommended for individual components. c) Bulk handling should ensure that abrasion and mechanical shock are minimized. 2. Transportation : Application Notice PG. 6 29.11.2012 SMD Power Choke Coil NOTE : Specifications subject to change without notice. Please check our website for latest information. SSP1009M SERIES