SSL1005

SSL1005 SUPERWORLD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

(a) (c) (b) (e) (d) 1. PART NO. EXPRESSION : (b) Dimension code (c) Inductance code : R10 = 0.10uH (a) Series code 2. CONFIGURATION & DIMENSIONS : A SUPERWORLD ELECTRONICS (S) PTE LTD 3. SCHEMATIC : (d) Tolerance code : M = ±20% (e) F : Lead Free SSL1005 SERIESHIGH CURRENT POWER INDUCTORS PG. 1 NOTE : Specifications subject to change without notice. Please check our website for latest information. 05.05.2008 PCB Pattern BCD 6.8 Max. Unit:m/m 5.5 Max. GE 2.5±0.5 Inductance L ( uH ) 0.10 ±20% 5. ELECTRICAL CHARACTERISTICS : SSL1005-R10MF SSL1005-R20MF SSL1005-R15MF Part No. 400.25V/1M Freq. Test Irms Max. ( A ) 0.65 50 400.65 420.65 DCR Isat Max. ( A )( mȍ ) Max. R10 A B D E C L G H 4.5 Max. 10.5 Max. HL e) Part temperature (ambient + temp. rise) : Shoul d not exceed 125°C under worst case operating conditions. d) Isat (A) : Will cause L to drop approximately 20% a) Operating temp. : -55°C to +125°C b) Storage temp. : -55°C to +125°C c) Irms (A) : Will cause coil temp. to rise approximately ǻT=40°C without core loss. 4. GENERAL SPECIFICATION : 0.15 ±20% 0.20 ±20% ( Hz ) 0.25V/1M 0.25V/1M

SUPERWORLD ELECTRONICS (S) PTE LTD SSL1005 SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 2 05.05.2008 6. CHARACTERISTICS CURVES : HIGH CURRENT POWER INDUCTORS SSL1005-R10MF SSL1005-R15MF SSL1005-R20MF

NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 05.05.2008 SSL1005 SERIES 7. RELIABILITY AND TEST CONDITION : HIGH CURRENT POWER INDUCTORS PERFORMANCE should be covered with solder. More than 90% of the terminal electrode Refer to standard electrical characteristics list seconds seconds Preheating 1. Appearance : No significant abnormality 2. Inductance change : Within ±20% Preheating No disconnection or short circuit. 2. Inductance : Within ±20% of initial value. 1. Appearance : No damage No disconnection or short circuit. 2. Inductance : Within ±20% of initial value. 1. Appearance : No damage Reliability Test Humidity Resistance Life Test Life Test High Temperature Low Temperature Thermal Shock Solderability Test Solder Heat Resistance 150°C 260°C 150°C 230°C Inductance DCR Heat Rated Current (Irms) Saturation Current (Isat) Mechanical Performance Test Electrical Characteristics Test ITEM Temperature : 40±5°C Time : 500±12 hours Applied Current : Rated Curent Humidity : 90% to 95% Measure at room temperature after placing for 2 to 3 hrs. Measure at room temperature after placing for 2 to 3 hrs. Temperature : 125±5°C Temperature : -55±5°C Time : 500±12 hours Time : 500±12 hours -55±3 +125±3 Conditions of 1 cycle. Room Temperature Room Temperature Temperature (°C) Measure at room temperature after placing for 2 to 3 hrs. Measure at room temperature after placing for 2 to 3 hrs. Total : 5 cycles Step Within 3 Within 3 30±3 Times (min.) 30±3 Preheat : 150°C, 60sec. Solder : Sn-Ag3.0-Cu0.5 Solder Temperature : 230±5°C Preheat : 150°C, 60sec. Solder : Sn-Ag3.0-Cu0.5 Dip Time : 10±0.5sec. Flux for lead free : rosin Solder Temperature : 260±5°C Flux for lead free : rosin 10±0.5 seconds Dipping cooling Natural 4±1 seconds Dipping cooling Natural Dip Time : 4±1sec. TEST CONDITION 1. Applied the allowed DC current 2. Temperature measured by digital surface thermometer Isat(A) will cause Lo to drop approximately 20% CH16502, Agilent33420A Micro-Ohm Meter. HP4284A, CH11025, CH3302, CH1320, CH1320S approximately ǻT=40°C without core loss Irms(A) will cause the coil temperature rise LCR meter.

SUPERWORLD ELECTRONICS (S) PTE LTD SSL1005 SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 5 05.05.2008 HIGH CURRENT POWER INDUCTORS 9. PACKAGING INFORMATION : A C(mm)A(mm)Type B(mm) D(mm) EMBOSSED CARRIER ØC 2.0±0.5 D 9-1. Reel Dimension B COVER TAPE 24.0±0.513" x 24mm 13.5±0.5 75±2 330 Inner Box Carton Chip / Reel 9-3 Packaging Quantity Size 5400 SSL1005 2700 900 t Ko Bo 1.75±0.1

0.15 MIN

P Ao W(mm) 24.0±0.3 P(mm)Ko(mm)Bo(mm)Ao(mm) t(mm) 0.35±0.05 W 9-2 Tape Dimension