SSC-AM101 SEOUL | Alldatasheet
Document overview
- Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
*Customer: SPECIFICATION ITEM CHIP LED DEVICE MODEL SSC-AM101 Revision Date Rev0.0(040101) [ Contents] 1. Features 2. Absolute maximum ratings 3. Electro-optical characteristics 4. Charact eristic diagram 5. Soldering profile 6. Outline dimension 7. Packing 8. Reel packing structure 9. Precaution for use Drawn by Checked by Approved by SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 1/7 - SSC-AM101Seoul SemiconductorSSC-QP-0401-06(REV.0)
- Features Package : 1.6×0.8×0.8mm Untinted, Diffused flat mold Wavelength : 605㎚ 2. Absolute Maximum Ratings ( Ta=25℃) Parameter Symbol Value Unit Power Dissipation Pd 75 ㎽ Forward Current IF 30 ㎃ Peak Forward Current IFM *1 50 ㎃ Reverse Voltage VR 5 V Operating Temperature Topr -40 ~ 85 ℃ Storage Temperature Tstg -40 ~ 100 ℃ *1 I FM conditions: Pulse width Tw≤ 0.1ms and Duty ratio≤ 1/10 3. Electro-Optical Characteristics ( Ta=25℃) Parameter Symbol Condition Min Typ Max Unit Forward Voltage VF IF=20㎃ 1.8 2.0 2.5 V Reverse Current IR VR=5V - - 10 ㎂ Luminous Intensity*2 IV IF=20㎃ 10 18 - mcd W avelength λ p IF=20㎃ 600 605 615 ㎚ Spectral Bandwidth Δλ IF=20㎃ - 30 - ㎚ Viewing angle*3 2θ 1/2 IF=20㎃ - 120 - ˚ *2 The luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. *3 θ 1/2 is the off-axis where the luminous intensity is 1/2 the peak intensity. [Note] All products confirm to the listed minimum and maximum specifications for electric and optical characteristics, when operated at 20mA within the maximum ratings shown above. All measurements were made under the standardized environment of SSC. SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 2/7 - SSC-AM101SSC-QP-0401-06(REV.0) (Tolerance : Iv ±10 %, λD ±2 nm, VF ±0.1 V)
- Characteristic Diagram SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 3/7 - SSC-AM101SSC-QP-0401-06(REV.0) Forward Current vs Forward Voltage Relative Intensity vs Forward Current 0 5 10 15 20 25 30 35 100 120 140 Relative Intensity IV(%) Forward Current IF(mA) Radiation Diagram -25 0 25 50 75 100 Forward current IF(mA) Ambient temperature Ta( )℃ Forward Current Derating Curve 100 Forward Current IF(mA) Forward Voltage VF(V)
- Soldering Profile (1) Reflow Soldering Conditions / Profile Preliminary heating to be at 150℃max. for 2 minutes max. Soldering heat to be at 240℃max. for 5 seconds max. Temperature rise: 5°C/sec. -5°C/sec. Cooling: Pre-heating Operation heating 60 to 120 sec. 5sec. max 120 150 240 0 ~ LED Surface temperature (2) Hand Soldering conditions Not more than 3 seconds @MAX280℃, under Soldering iron. [Note] In case the soldered products are reused in soldering process, we don’t guarantee the products. SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 4/7 - SSC-AM101SSC-QP-0401-06(REV.0)
(1) Qu antity: 4,000pcs./Reel (2) Cumulative Tolerance: Cumulative Tolerance/10pitches to be ±0.2mm (3) Adhesion Strength of Cover Tape: Adhesion strength to be 0.1-0.7N when the over tape is turned off from the carrier tape at10˚ angle to be the carrier tape. (4) Package: P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package. SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 5/7 - SSC-AM101SSC-QP-0401-06(REV.0) 7. Packing 6. Outline Dimension PCB Polarity Mark [Recommended Solder Pattern] Anode Cathode Tolerance: ±0.1, Unit: ㎜ Tolerance: ±0.2, Unit: ㎜
SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 6/7 - SSC-AM101SSC-QP-0401-06(REV.0) 8. Reel Packing Structure c CHIP LED PART : SSC##101 Q'YT : 40,000EA SEOUL SEMICONDUCTOR CO.,LTD a CHIP LED b DATE : LOT NO : CODE : SSC PART NUMBER : SSC##101 245 *Material: Paper(SW3B(B))Outer Box a 7inch TYPE b c 220 142 SIZE(mm) Reel QUANTITY : 4,000 QUANTITY : 4,000 SSC PART NUMBER : SSC##101 Aluminum Vinyl Bag
- Precaution for use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desiccator) with a desiccant . Otherwise, to store them in the following environment is recommended. T emperature : 5℃~30℃ Humidity : 60%HR max. (2) Attention after opened However LED is co rresponded SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. After opened and mounted, the soldering shall be quickly. b. Keeping of a fraction T emperature : 5 ~ 40℃ Hu midity : less than 30% (3) In case o f more than 1 week passe d after o pening or change col or of indicator o n desi ccant components shall be dried 10-12hr. at 60±5℃. (4) In case of supposed the components is humid, shall be dried dip-solder just before. 100Hr at 80±5℃ or 12Hr at 100±5℃. (5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. (6) Quick cooling shall not be avoid. (7) Components shall not be mounted on warped direction of PCB. (8) Anti radioactive ray design is not considered for the products listed here in. (9) Gallium a rsenide is used in some o f the produ cts listed in th is publication. These produ cts are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. (10) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA should be used. (11) When the LEDs are illu minating, operating current should be decided after considering the ambient maximum temperature. (12) LEDs must be st ored to maintain a cl ean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (13) The LEDs must be soldered within seven days after opening the moisture-proof packing. (14) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (15) The appearance and specifications of the product may be modified for improvement without notice. SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 7/7 - SSC-AM101SSC-QP-0401-06(REV.0)