SR1640

SR1620_1 TSC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Dimensions in inches and (millimeters) - 128 - Version: B07 SR1620 SR16150 16.0 AMPS. Schottky Barrier Rectifiers TO-220AB F e a t u r e s /cuspopen Low power loss, high efficiency. /cuspopen High current capability, Low VF. /cuspopen High reliability /cuspopen High surge current capability. /cuspopen Epitaxial construction. /cuspopen Guard-ring for transient protection. /cuspopen For use in low voltage, high frequency inventor, free wheeling, and polarity protection application M e c h a n i c a l D a t a /cuspopen Cases: TO-220AB molded plastic /cuspopen Epoxy: UL 94V-0 rate flame retardant /cuspopen Terminals: Pure tin plated, lead free. solderable per MIL-STD-202, Method 208 guaranteed /cuspopen Polarity: As marked /cuspopen High temperature soldering guaranteed: 260 oC/10 seconds.25”,(6.35mm) from case. /cuspopen Weight: 2.24 grams Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol SR16 SR16 SR16 SR16 SR16 SR16 SR16 100 SR16

150 Units

Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 90 100 150 V Maximum RMS Voltage VRMS 14 21 28 35 42 63 70 105 V Maximum DC Blocking Voltage VDC 20 30 40 50 60 90 100 150 V Maximum Average Forward Rectified Current See Fig. 1 I(AV) 16.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 170 A Maximum Instantaneous Forward Voltage @ 8.0A VF 0.55 0.70 0.90 1.05 V 0.5 0.1 Maximum D.C. Reverse Current @ Tc=25 oC at Rated DC Blocking Voltage @ Tc=100 oC IR 15 10 5 mA mA Typical Junction Capacitance (Note 2) Cj 440 320 pF Typical Thermal Resistance (Note 1) RθJC 2.5 oC/W Operating Junction Temperature Range TJ -65 to +125 -65 to +150 oC Storage Temperature Range TSTG -65 to +150 oC Notes: 1. Mounted on Heatsink Size of 2” x 3” x 0.25” Al-Plate. 2. Measured at 1MHz and Applied Reverse Voltage of 4.0V D.C.

RATINGS AND CHARACTERISTIC CURVES (SR1620 THRU SR16150) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG PEAK FOR WARD SURGE CURRENT . (A) 1 2 5 10 20 100 50 200 150 100 250 300 NUMBER OF CYCLES AT 60Hz FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 0 50 100 150 4.0 8.0 12.0 16.0 20.0 CASE TEMPERATURE. ( C) o SR1650-16150 SR1620-1640 Version: B07 Tj=100 Tj=25 C Tj=75 C FIG.4- TYPICAL REVERSE CHARACTERISTICS PER LEG INSTANTANEOUS REVERSE CURRENT .( m A ) 0 20 40 60 80 100 120 140 .001 .01 .10 1.0 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS TRANSIENT THERMAL IMPEDANCE. ( C/W)O 10.01 0.1 10 100 0.1 10.0 100 PULSE DURATION. (sec) SR1650-1660 SR1620-1640 FIG.5- TYPICAL JUNCTION CAPACITANCE PER LEG CAPACITANCE.(pF) .1 .4 1.0 4 10 40 80 100100 200 400 600 1000 800 2000 4000 REVERSE VOLTAGE. (V) FIG.3- TYPICAL FORWARD CHARACTERISTICS PER LEG INSTANTANEOUS FOR WARD CURRENT . (A) 0.1 1.0 INSTANTANEOUS FORWARD VOLTAGE. (V) SR1650-1660SR1620-1640 SR1690-16100 SR16150