SPW SYSTEMSENSOR | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Plug-in design• Protective cover isolates speaker components, reduces ground • faults Electrical compatibility with existing SpectrAlert products• Field selectable candela settings on wall and ceiling units: • Standard: 15, 15/75, 30, 75, 95, 110, 115 High: 135, 150, 177, 185 Shorting spring on mounting plate tests continuity before • installation Rotary switch simplifies field selection of speaker voltage (25 and •
70.7 Vrms) and power settings (¼, ½, 1 and 2 watts)
Universal mounting plate for wall- and ceiling-mount units• Compatible with System Sensor synchronization protocol• SP speakers offer high fidelity sound output• SPV speakers offer high volume sound output• Automatic selection of 12- or 24-volt operation at 15 and 15/75 • candela No extension ring required• Ceiling and wall mount application• Optional tamper resistant Torx head screw included• The SpectrAlert Advance Series of speakers and speaker strobes is designed to reduce ground faults. The plug-in design allows the installer to pre-wire mounting plates and dress the wires before plugging in the speakers. The plastic cover prevents nicked wires by covering exposed speaker components. This design also allows faster installations with instant feedback to ensure that wiring is properly connected, rotary switches to select voltage and power settings, and 11 field selectable candela settings for wall and ceiling speaker strobes. The low total harmonic distortion of the SP speaker offers high fidelity sound output while the SPV speaker offers high volume sound output for use in high ambient noise applications. SpectrAlert Advance makes installation easy
- Attach a universal mounting plate to a 4 × 4 × 21⁄8 inch back box . Flush mount applications are achievable without the need for an extension ring.
- Connect the notification appliance circuit or speaker wiring to the terminals on the mounting plate.
- Attach the speaker or speaker strobe to the mounting plate by inserting the product tabs into the mounting plate grooves. Rotate the device into position to lock the product pins into the mounting plate terminals. The device will temporarily hold in place with a catch until it is secured with a captured mounting screw. 10-08-E7320-1653:201S4048
SpectrAlert Advance Speaker and Speaker Strobe Specifications Architectural/Engineering Specifications General SpectrAlert Advance speaker and speaker strobes shall mount to a 4 × 4 × 21⁄8-inch back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit and amplifier wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance speaker strobes, when used with the Sync•Circuit™ Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt rated notification appliance circuit outputs shall operate between nine and 17.5 volts; 24-volt rated notification appliance circuit outputs shall operate between 17 and 33 volts. Indoor SpectrAlert Advance products shall operate between 32°F and 120°F from a regulated DC, or full-wave rectified, unfiltered power supply. Speaker strobes shall have field-selectable candela settings including 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, 185. Speaker The speaker shall be a System Sensor SpectrAlert Advance model _______ dual-voltage transformer speaker capable of operating at 25.0 or 70.7 nominal Vrms. It should be listed to UL 1480 and shall be approved for fire protective service. The speaker shall have a frequency range of 400 to 4000 Hz and shall have an operating temperature between 32°F and 120°F. Speaker shall have power taps and voltage that are selected by rotary switches. Speaker Strobe combination The speaker strobe shall be a System Sensor SpectrAlert Advance model __________ listed to UL1480 and UL 1971 and be approved for fire protective signaling systems. Speaker shall be capable of operating at 25.0 or 70.7 nominal Vrms selected via rotary switch, and shall have a frequency range of 400 to 4000 Hz. Speaker shall have power taps which are selected by rotary switch. The strobe shall comply with the NFP A72 requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. Synchronization Module The module shall be a System Sensor Sync•Circuit model MDL listed to UL 464 and shall be approved for fire protective service. The module shall synchronize SpectrAlert strobes at 1Hz. The module shall mount to a 411⁄16 × 411⁄16 × 21⁄8-inch back box. The module shall also control two Style Y (class B) circuits or one Style Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more synchronization modules together will synchronize all the zones they control. The module shall not operate on a coded power supply. Physical Specifications Operating Temperature 32°F to 120°F (0°C to 49°C) Humidity Range 10 to 93% non-condensing Dimensions, Wall-Mount SPS Speaker Strobe 6.0 in L × 5.0 in W × 4.7 in D (including lens and speaker) SPSV Speaker Strobe 6.0 in L × 5.0 in W × 4.9 in D (including lens and speaker) SP Speaker 6.0 in L × 5.0 in W × 2.8 in D SPSV Speaker 6.0 in L × 5.0 in W × 2.9 in D Dimensions, Ceiling-Mount SPS Speaker Strobe 6.8 in Dia. × 4.7 in D (including lens and speaker) SPSV Speaker Strobe 6.8 in Dia. × 4.8 in D (including lens and speaker) SP Speaker 6.8 in Dia. × 2.8 in D SPV Speaker 6.8 in Dia. × 2.9 in D Electrical/Operating Specifications Nominal Voltage (speakers) 25 Volts or 70.7 Volts (nominal) Maximum Supervisory Voltage (speakers) 50 VDC Strobe Flash Rate 1 flash per second Nominal Voltage (strobes) Regulated 12 VDC/FWR or regulated 24 DC/FWR Operating Voltage Range (includes fire alarm panels with built in sync) 8 to 17.5 V (12 V nominal) or 16 to 33V (24 V nominal) Operating Voltage with MDL Sync Module 9 to 17.5 V (12 V nominal) or 17 to 33V (24 V nominal) Frequency Range 400 to 4000 Hz Power ¼, ½, 1, 2 watts
UL Max. Strobe Current Draw (mA RMS) Candela 8 to 17.5 Volts 16 to 33 Volts DC FWR DC FWR Standard Candela Range 15 123 128 66 71 15/75 142 148 77 81
30 NA NA 94 96
75 NA NA 158 153
95 NA NA 181 176
110 NA NA 202 195
115 NA NA 210 205
135 NA NA 228 207
150 NA NA 246 220
177 NA NA 281 251
185 NA NA 286 258
UL Reverberant (dBA @ 10 ft.) 2W 1W ½ W ¼ W Wall-Mount SP Series 86 83 80 77 Wall-Mount SPV Series 90 87 84 81 Ceiling-Mount SPC Series 86 83 80 77 Ceiling-Mount SPCV Series 90 87 84 81 Wall-Mount SPS Series 85 82 79 76 Wall-Mount SPSV Series 89 86 83 80 Ceiling-Mount SPSC Series 85 82 79 76 Ceiling-Mount SPSCV Series 89 86 83 80 Dimensions 5.00˝ .97˝ 1.84˝ 5.98˝ 6.81˝ 1.60˝ 1.84˝ 2.83˝ 5.00˝ 2.83˝ 1.84˝1.60˝ 5.97˝ Ceiling Mount SPV Speaker Wall Mount SP Speaker Wall Mount SPS Speaker Strobe Ceiling Mount SP Speaker Ceiling Mount SPS Speaker Strobe
3825 Ohio Avenue • St. Charles, IL 60174 Phone: 800-SENSOR2 • Fax: 630-377-6495 ©2008 System Sensor. Product specifications subject to change without notice. Visit systemsensor.com for current product information, including the latest version of this data sheet. A05-0424-002 • 5/08 • #1986 Ordering Information for SpectrAlert® Advance Speakers and Speaker Strobes Wall Mount White Red Description SPW SPR Speaker only SPWV SPRV Speaker only, High dB SPSW* SPSR* Speaker Strobe, Selectable Candela (15, 15/75, 30, 75, 95, 110, 115) SPSWH* SPSRH* Speaker Strobe, Selectable Candela, High cd (135, 150, 177, 185) SPSWV* SPSRV* Speaker Strobe, Selectable Candela (15, 15/75, 30, 75, 95, 110, 115), High dB Ceiling Mount White Red Description SPCW SPCR Speaker only SPCWV SPCRV Speaker only, High dB SPSCW* SPSCR Speaker Strobe, Selectable Candela (15, 15/75, 30, 50, 75, 95, 110, 115) SPSCWH* SPSCRH Speaker Strobe, Selectable Candela, High cd (135, 150, 177, 185) SPSCWV* SPSCRV Speaker Strobe, Selectable Candela (15, 15/75, 30, 75, 95, 110, 115), High dB SPSCWVH* SPSCRVH Speaker Strobe, Selectable Candela, High dB, High cd (135, 150, 177, 185) Accessories White Red Description RFPW RFP 7 in × 9.5 in Retrofit Plate SPBBSCW SPBBSC Ceiling Mount Back Box Skirt SPBBSW SPBBS Wall Mount Back Box Skirt TRW TR Wall Mount Trim Ring TRCW TRC Ceiling Mount Trim Ring * Add -P to model number for plain housing (no “FIRE” marking on the cover) e.g. SPSW-P Surface Mounting Ceiling Mount Speaker with SPBBSCW Back Box Skirt Wall Mount Speaker Strobe with SPBBS Back Box Skirt