SPS252012U1R0Y

SPS252012U SUPERWORLD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

S P S 2 5 2 0 1 2 U 1 R 0 Y (a) (c) (b) (e) (d) 1. PART NO. EXPRESSION : (b) Dimension code (c) U: Uncoated (a) Series code 2. CONFIGURATION & DIMENSIONS : 4. MATERIALS : (a) Core : Ferrite Core (b) Wire : Copper Wire a 3. SCHEMATIC : (e) Tolerance code : M=± 20% Y=± 30% 5. GENERAL SPECIFICATION : b) Irms˖Based on temperature rise ˄ƸT˖40ć.˅ a) Isat : Based on inductance change ( L/L0 : -30%) @ ambient temp. 25°CƸ̰ SPS252012U SERIESSMD POWER INDUCTOR PG. 1 NOTE : Specifications subject to change without notice. Please check our website for latest information. 01.09.2011 2.20± 0.1 BD 0.80 ref. E Unit:m/m 2.50± 0.1 A C 1.2 max. 0.85 ref. b c) Storage temp. : -40° C to +105° C, 50-60%RH (Product without taping) d) Operating temp. : -40° C to +105° C e) Resistance to solder heat : 260± 5° C 10± 0.5secs (d) Inductance code : 1R0 = 1.0 µH A B D E D C SUPERWORLD ELECTRONICS (S) PTE LTD

NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 2 01.09.2011 6. ELECTRICAL CHARACTERISTICS : SPS252012U1R0Y Part Number 1.5 6.8 3.3 4.7 2.2 1.0 Inductance ( µH ) 0.590.630 DCR ±3 0 % 0.290 0.450 0.130 0.200 ±2 0 % ( ȍ ) 0.103 0.083 Isat 0.81 0.65 1.30 0.98 1.45 1.70 Typ. ( A ) 7. CHARACTERISTIC CURVES : SPS252012U1R5Y SPS252012U2R2M SPS252012U3R3M SPS252012U4R7M SPS252012U6R8M SPS252012U100M Frequency 0.1V/1M ( Hz ) TestTolerance ( % ) 1.40 0.84 1.25 1.00 1.90 2.20 Typ. ( A ) 2.60 Isat ±3 0 % ±2 0 % ±2 0 % ±2 0 % ±2 0 % ±2 0 % 0.1V/1M 0.1V/1M 0.1V/1M 0.1V/1M 0.1V/1M 0.1V/1M SPS252012U SERIES SUPERWORLD ELECTRONICS (S) PTE LTD ˃ˁ˃˃ ˃ˁ˄˃ ˃ˁ˅˃ ˃ˁˆ˃ ˃ˁˇ˃ ˃ˁˈ˃ ˃ˁˉ˃ ˃ˁˊ˃ ˃ˁˋ˃ ˃ˁˌ˃ ˄ˁ˃˃ ˃ˁ˃ ˈˁ˃ ˄˃ˁ˃ ˄ˈˁ˃ ˅˃ˁ˃ ˅ˈˁ˃ ˆ˃ˁ˃ ˆˈˁ˃ ˇ˃ˁ˃ ˇˈˁ˃ Ϧ˧ʻкʼ ˃ˁ˃˃ ˃ˁ˅˃ ˃ˁˇ˃ ˃ˁˉ˃ ˃ˁˋ˃ ˄ˁ˃˃ ˄ˁ˅˃ ˄ˁˇ˃ ˄ˁˉ˃ ˃ˁ˃ ˈˁ˃ ˄˃ˁ˃ ˄ˈˁ˃ ˅˃ˁ˃ ˅ˈˁ˃ ˆ˃ˁ˃ ˆˈˁ˃ Ϧ˧ʻкʼ SPS252012U1R5Y

NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 3 01.09.2011 SMD POWER INDUCTOR 7. CHARACTERISTIC CURVES : SPS252012U SERIES SUPERWORLD ELECTRONICS (S) PTE LTD ˃ˁ˃˃ ˃ˁ˅˃ ˃ˁˇ˃ ˃ˁˉ˃ ˃ˁˋ˃ ˄ˁ˃˃ ˄ˁ˅˃ ˄ˁˇ˃ ˄ˁˉ˃ ˄ˁˋ˃ ˅ˁ˃˃ ˅ˁ˅˃ ˃ˁ˃ ˈˁ˃ ˄˃ˁ˃ ˄ˈˁ˃ ˅˃ˁ˃ ˅ˈˁ˃ ˆ˃ˁ˃ ˆˈˁ˃ ˇ˃ˁ˃ ˇˈˁ˃ ˈ˃ˁ˃ Ϧ˧ʻкʼ ˃ˁ˃˃ ˃ˁˆ˃ ˃ˁˉ˃ ˃ˁˌ˃ ˄ˁ˅˃ ˄ˁˈ˃ ˄ˁˋ˃ ˅ˁ˄˃ ˅ˁˇ˃ ˅ˁˊ˃ ˆˁ˃˃ ˆˁˆ˃ ˃ˁ˃ ˈˁ˃ ˄˃ˁ˃ ˄ˈˁ˃ ˅˃ˁ˃ ˅ˈˁ˃ ˆ˃ˁ˃ ˆˈˁ˃ ˇ˃ˁ˃ Ϧ˧ʻкʼ SPS252012U3R3M ˃ˁ˃˃ ˃ˁˈ˃ ˄ˁ˃˃ ˄ˁˈ˃ ˅ˁ˃˃ ˅ˁˈ˃ ˆˁ˃˃ ˆˁˈ˃ ˇˁ˃˃ ˇˁˈ˃ ˈˁ˃˃ ˃ˁ˃ ˈˁ˃ ˄˃ˁ˃ ˄ˈˁ˃ ˅˃ˁ˃ ˅ˈˁ˃ ˆ˃ˁ˃ ˆˈˁ˃ ˇ˃ˁ˃ ˇˈˁ˃ Ϧ˧ʻкʼ ˃ˁ˃˃ ˃ˁˋ˃ ˄ˁˉ˃ ˅ˁˇ˃ ˆˁ˅˃ ˇˁ˃˃ ˇˁˋ˃ ˈˁˉ˃ ˉˁˇ˃ ˃ˁ˃ ˈˁ˃ ˄˃ˁ˃ ˄ˈˁ˃ ˅˃ˁ˃ ˅ˈˁ˃ ˆ˃ˁ˃ ˆˈˁ˃ ˇ˃ˁ˃ Ϧ˧ʻкʼ SPS252012U6R8M ˃ˁ˃˃ ˄ˁ˃˃ ˅ˁ˃˃ ˆˁ˃˃ ˇˁ˃˃ ˈˁ˃˃ ˉˁ˃˃ ˊˁ˃˃ ˋˁ˃˃ ˌˁ˃˃ ˄˃ˁ˃˃ ˃ˁ˃ ˈˁ˃ ˄˃ˁ˃ ˄ˈˁ˃ ˅˃ˁ˃ ˅ˈˁ˃ ˆ˃ˁ˃ ˆˈˁ˃ ˇ˃ˁ˃ ˇˈˁ˃ ˈ˃ˁ˃ Ϧ˧ʻкʼ SPS252012U100M

NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 4 01.09.2011 SMD POWER INDUCTOR 8. RELIABILITY & TEST CONDITION : 10± 0.5 seconds seconds Solderability 150° C 4± 1.0 seconds seconds More than 90% of the terminal electrode should be covered with solder. Preheating 245° C Dipping Natural cooling Solder : Sn-Ag3.0-Cu0.5 Flux for lead free : rosin Dip Time : 4± 1sec. Preheat : 150° C, 60sec. Solder Temperature : 245± 5° C Temperature Rise Test Solder Heat Resistance Rated Current Operating Temperature Storage Temperature Impedance change : Within ± 20% Appearance : No significant abnormality Preheating 260° C 150° C NaturalDipping cooling 40°C max. (ǻt) ITEM PERFORMANCE 1. Applied the allowed DC current Dip Time : 10± 0.5sec. Solder Temperature : 260± 5° C Solder : Sn-Cu0.5% Preheat : 150° C, 60sec. Flux for lead free : rosin Heat Rated Current (Irms) will cause the coil temperature TEST CONDITION -40 to +105° C -40 to +105° C, 50-60%RH Base on temp. rise & L/L0A 30%.Ƹ̰ Product without taping Saturation DC current (Isat) will cause L0 to drop approximately L(%)Ƹ 2. Temperature measured by hte digital surface thermometer Thermal shock Appearance: no damage Inductance: within± 20% initial value Step 1: -55+0/-2° C 15± 1 min. Step 3: +85 +2/-0° C 15± 1min. Step 4: Room temperature 5 min. Condition for 1 cycle Step 2: Room temperature 5 min. Number of cycles: 100 Humidity Resistance Test Measured at room temperature after placing for 2 to 3hrs. Duration : 500 hrs Temperature : 40± 2° C Humidity : 90~95% RH. Impedance : Within ± 20% of initial value. Appearance : No damage. Temperature (° C)Phase Times (min.) Measured : 100 times -55 +0/-2° C Room temp. 15± 1 +85 +2/-0° C Room Temp. 15± 1 SPS252012U SERIES SUPERWORLD ELECTRONICS (S) PTE LTD

NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 5 01.09.2011 SMD POWER INDUCTOR 8. RELIABILITY & TEST CONDITION : Random Vibration Test ITEM mutually perpendicular directions. (Total 9hours). this cycle shall be perfromed 12 times in each of the three Directions & times : X, Y, Z directions for 15 mins. defects harmful to the characteristics should Appearance : Cracking, shipping & any other Impedance : Within ± 20% not be allowed. Frequency : 10-55-10Hz for 15 min. Amplitude : 1.52mm PERFORMANCE TEST CONDITION High Temp. Resistance Test Applied current : rated current Temperature : -40± 2° C Impedance : Within ± 20% of initial value. Appearance : No damage. Low Temp. Life Test Duration : 500 hrs Temperature : 105± 2° C Impedance : Within ± 20% of initial value. Appearance : No damage. Duration : 500 hrs SPS252012U SERIES SUPERWORLD ELECTRONICS (S) PTE LTD

NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 7 01.09.2011 SMD POWER INDUCTOR 10. PACKAGING INFORMATION : 10-1. Reel Dimension10-1. Reel Dimension 7" x 8mm D B C A Application Notice a) Temperature and humidity conditions : -10 ~ 40° C and 30 ~ 70% RH. b) Recommended products should be used within 6 months from the time of delivery. c) The packaging material should be kept where no chlorine or sulfur exists in the air. b) The use of tweezers or vacuum pick up is strongly recommended for individual components. c) Bulk handling should ensure that abrasion and mechanical shock are minimized. a) Products should be handled with care to avoid dam age or contamination from perspiration and skin oils. To maintain the solderabililty of terminal electrodes : 2. Transportation : 1. Storage Conditions : Base tape 10-4. Tearing Off Force Top cover tape 165° to 180° F 10-3. Packaging Quantity Chip / Reel Chip Size 2000 252012 in the arrow direction under the following conditions. The force for tearing off cover tape is 15 to 60 grams Tearing Speed 45~85 Room Humidity 5~35 (° C) Room Temp. (%) 860~1060 Room atm (hPa) (mm/min) 300 P2:2± 0.05 P Po:4± 0.1 W:8.0± 0.1 Bo Ko Section A-A AoA t A 10-2 Tape Dimension / 8mm SPS252012U SERIES 178.0± 2.0 D(mm) 50 min7" x 8mm 8.4± 1.0 13.0± 0.8 Type A(mm) C(mm) B(mm) Size SPS Series 252012 1.40± 0.2 Ko(mm)Bo(mm) 2.74± 0.05 Ao(mm) 2.27± 0.05 P(mm) t(mm) none D1(mm) SUPERWORLD ELECTRONICS (S) PTE LTD