DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
(a) (c) (b) (d) 1. PART NO. EXPRESSION : (a) Series code SUPERWORLD ELECTRONICS (S) PTE LTD 3. MATERIALS : PG. 1 1.6 -0.1/+0.2 BD Unit:m/m 2.0 -0.1/+0.2 AC 1.0 Max. 0.60 Ref. S P S 2 0 1 6 1 0 E 1 R 0 M F E 0.80 Ref. L 2.4 Ref. G 0.8 Ref. H 1.8 Ref. (b) Dimension code (c) Material code (e) (d) Inductance code : 1R0 = 1.0uH (e) Tolerance code : M = ± 20% 16.01.2014 SPS201610E SERIESSMD Power Inductors 2. CONFIGURATION & DIMENSIONS : A BC D E D (a) Core : Ferrite Core (b) Coating : Epoxy with magnetic powder (c) Termination : Tin Pb Free (d) Wire : Enameled Copper Wire G H Recommended PCB Pattern L a b dc NOTE : Specifications subject to change without notice. Please check our website for latest information. Exposed wire tolerance limit of coating resin part on product side. Size of exposed wire occurring to coating resin is specified below. 1. Width direction（dimension a）：Acceptable when a≦w/2 Nonconforming when a＞w/2 2. Length direction（dimension b）：Dimension b is not specified. 3. The total area of exposed wire occurring to each sides is not greater than 50% of coating resin area, and is acceptable. b a w (f) (f) F : RoHS Compliant
- GENERAL SPECIFICATION : SUPERWORLD ELECTRONICS (S) PTE LTD PG. 2 Part No. SPS201610ER68MF Inductance 0.68± 20% ( uH ) 0.1V/1M DCR ( Hz ) Frequency Test 0.046 Isat 3.25 ( Ω )Typ. Typ. (A) Isat 2.80 Max. (A) 5. ELECTRICAL CHARACTERISTICS : b) Isat : Based on inductance change (ΔL/L0 : -30%)≦ c) Irms : Based on temperature rise ( ΔT : 40°C) Max d) Operating temp. : -55° C to 125° C(for products in unopened tape package, less than 40° C) a) ambient temp. : 25° C Irms 2.80 Typ. (A) SMD Power Inductors NOTE : Specifications subject to change without notice. Please check our website for latest information. 16.01.2014 SPS201610E SERIES DCR 0.055 ( Ω )Max. 0.072 0.170 0.042 0.028
SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 6. CHARACTERISTICS CURVES : SMD Power Inductors NOTE : Specifications subject to change without notice. Please check our website for latest information. SPS201610ER24MF SPS201610ER47MF SPS201610ER68MF SPS201610E1R0MF SPS201610E2R2MF 16.01.2014 SPS201610E SERIES
SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4 NOTE : Specifications subject to change without notice. Please check our website for latest information. SMD Power Inductors 16.01.2014 SPS201610E SERIES 7. RELIABILITY AND TEST CONDITION : Life Test Solderability Test Solder Heat Resistance JEDEC J-STD-020DClassification Reflow Profiles Preconditioning:Run through IR reflow for 2 times.( IPC/ Refer to standard electrical characteristics list PERFORMANCE Electrical Characteristics Test Inductance L ITEM Agilent-4291, Agilent- 4287 Agilent-4291 TEST CONDITION Appearance : No dam age. to drop approximately ΔL(%). Saturation DC Current (Isat) will cause L0 Agilent-4338 Temperature : 85± 2° C(Inductor) Base on temp. rise & ΔL/L0A 30%.≦ Q SRF DC Resistance Rated Current rise approximately ΔT(°C) without core loss. Heat Rated Current (Irms) will cause the coil temperature ΔT 40°CMaxTemperature Rise Test 1.Applied the allowed DC current. 2.Temperature measured by digital surface thermometer Mechanical Performance Test Inductance : within± 10% of initial value Q : Shall not exceed the specification value. More than 95% of terminal electr ode should be covered with solder. Reliability Test Agilent-4192, Agilent- 4285 RDC : within ± 15% of initial value and shall not exceed the specification value 260± 5 (solder temp) (° C) ramp/immersion Temperature Temperature and emersion rate 10± 1 (s) Tim e of heat Number cycles 25mm/s± 6 mm/s 1 Depth: completely cove r th e te r m i n a ti o n Solder : Sn99.5%-Cu0. 5% Temperature : 245± 5° C Preheat : 150° C,60sec Flux for lead free : Rosin. 9.5% Dip time : 4± 1sec Depth : completely cover t he t erminat ion Appearance : No dam age. Inductance : within± 10% of initial value Q : Shall not exceed the specification value. RDC : within ± 15% of initial value and shall not exceed the specification value Applied current : rated current Duration : 1000± 12hrs Measured at room temperature after placing for 24± 2 hrs Thermal shock JEDEC J-STD-020DClassification Reflow Profiles Step1 : -40± 2° C 30± 5min Preconditioning:Run through IR reflow for 2 times.( IPC/ Step2 : 25±2°C 0.5min≦ Step3 : 105± 2° C 30± 5min Number of cycles : 500 Measured at room fempraturc after placing for 24± 2 hrs Humidity Resistance Test JEDEC J-STD-020DClassification Reflow Profiles Humidity : 85±2﹪R.H Preconditioning:Run through IR reflow for 2 times.( IPC/ Temperature : 85° C± 2° C Duration : 1000hrs Min. with 100% rated current Measured at room temperature after placing for 24± 2 hrs Vibration Test JEDEC J-STD-020DClassification Reflow Profiles Oscillation Fr equency : 10 ～2K～10Hz for 20 minutes Preconditioning:Run through IR reflow for 2 times.( IPC/ Equipment : Vibration checker Total Amplitude : 1.52mm± 10% Testing Time : 12 hours(20 minutes, 12 cycles each of 3 orientations)
SUPERWORLD ELECTRONICS (S) PTE LTD PG. 6 NOTE : Specifications subject to change without notice. Please check our website for latest information. SMD Power Inductors 16.01.2014 SPS201610E SERIES 9. PACKAGING INFORMATION : 9-1. Reel Dimension D B C A C(mm) 13± 0.8 7" x 8mm 7" x 8mm 50 Min.8.4± 1.0 Type B(mm)A( mm) 178± 2 D(mm) P Po:4± 0.1 9-2 Tape Dimension / 8mm P2:2± 0.05 W:8.0± 0.1 Ao Bo Ko t Ko(mm) Series Bo(mm)Ao(mm) 4.0± 0.1 P( mm) 0.23± 0.05 t(mm) 9-3. Packaging Quantity SPS201610E Chip / Reel Size 2000 Bottom View
SUPERWORLD ELECTRONICS (S) PTE LTD PG. 7 NOTE : Specifications subject to change without notice. Please check our website for latest information. SMD Power Inductors 16.01.2014 SPS201610E SERIES Application Notice a) Temperature and humidity conditions : Less than 40° C and 60% RH. To maintain the solderabililty of terminal electrodes : b) Recommended products should be used within 12 months from the time of delivery. c) The packaging material should be kept where no chlorine or sulfur exists in the air. b) The use of tweezers or vacuum pick up is strongly recommended for individual components. c) Bulk handling should ensure that abrasion and mechanical shock are minimized. a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils. 2. Transportation : 1. Storage Conditions : 9-4. Tearing Off Force Top cover tape F 165° to 180° 860~1060 Room atm in the arrow direction under the following conditions. The force for tearing off cover tape is 15 to 80 grams Base tape 5~35 (° C) Room Temp. (%) 45~85 Room Humidity (mm/min) Tearing Speed (hPa) 300