SPLTR85 AMSCO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 13
Technical content
1 Version 0.2 | 2018-11-26 Preliminary datasheet version Produktdatenblatt | Version 1.1 www.osram-os.com
Applications
Metal Can ® TO56 Infrared Laser Diode in TO56 Package —Gesture Recognition Features: —Laser wavelength 850 nm —Efficient radiation source for cw and pulsed operation —Single tranverse mode semiconductor laser —High modulation bandwidth —TO56 package with photo diode
Ordering Information
Type Peak output power Ordering Code typ. Tcase = 25 °C Popt SPL TR85 200 mW Q65112A1150
2 Version 0.2 | 2018-11-26 Preliminary datasheet version Maximum Ratings Parameter Symbol Values Operating temperature Top min. max. -20 °C 60 °C Storage temperature Tstg min. max. -40 °C 85 °C Peak output power P opt max. 220 mW Forward current IF max. 260 mA Reverse voltage 1) VR max. 3 V Reverse voltage of photodiode VRPD max. 30 V Soldering temperature tmax = 10 s TS max. 260 °C Operation outside these conditions may damage the device. Operation at maximum ratings may influence lifetime.
3 Version 0.2 | 2018-11-26 Preliminary datasheet version Characteristics Popt = 200 mW; Tcase = 25 °C Parameter Symbol Values Forward current IF typ. max. 225 mA 255 mA Peak wavelength λ peak min. typ. max. 840 nm 850 nm 860 nm Spectral bandwidth at 50% I e,rel,max ∆λ typ. 3 nm Beam divergence (FWHM) parallel to pn-junction Θ‖ typ. 6 ° Beam divergence (FWHM) perpendicular to pn-junction Θ┴ typ. 19 ° Monitor current 2)3) Im min. typ. 300 µA 500 µA Threshold current I th typ. max. 56 mA 85 mA Forward voltage V F typ. max. 1.77 V 2.20 V TE polarization P TE typ. 20:1 Modulation frequency f min. 100 MHz Thermal resistance junction case real RthJC typ. 50 K / W
4 Version 0.2 | 2018-11-26 Preliminary datasheet version Relative Spectral Emission 4) Popt = f(λ) Beam Divergence 4) Popt = ƒ(θ), Tcase = 25 °C
5 Version 0.2 | 2018-11-26 Preliminary datasheet version Optical Output Power 4) Popt = f (IF) Operating Voltage 4) VF = f (IF) Threshold Current Ith = f(Tcase);
6 Version 0.2 | 2018-11-26 Preliminary datasheet version Dimensional Drawing 5) Approximate Weight: 310.0 mg
7 Version 0.2 | 2018-11-26 Preliminary datasheet version Electrical internal circuit Pin Description
1 LD Cathode
2 LD Anode, PD Cathode (case)
3 PD Anode
8 Version 0.2 | 2018-11-26 Preliminary datasheet version Tray 5) 200 pieces per Tray Barcode-Product-Label (BPL)
9 Version 0.2 | 2018-11-26 Preliminary datasheet version Transportation Packing and Materials 5) OHA02886 PACKVAR: R077Additional TEXT P-1+Q-1 Multi TOPLED Muster OSRAM Opto Semiconductors (6P) BATCH NO: (X) PROD NO: (9D) D/C: 11(1T) LOT NO: 21002199 123GH1234 0 24 5 (Q)QTY: 2000 0144 (G) GROUP:
260 C RT
240 C R
220 C R
MLBin3:Bin2: Q-1-20 Bin1: P-1-20 LSY T676 2 2a Temp ST R18 DEMY Barcode label Original packing label Box Dimensions of transportation box in mm Width Length Height 170 ± 5 mm 265 ±5 mm 95 ± 5 mm
10 Version 0.2 | 2018-11-26 Preliminary datasheet version Notes Depending on the mode of operation, these devices emit highly concentrated visible and non visible light light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1. Subcomponents of this device contain, in addition to other substances, metal filled materials including silver. Metal filled materials can be affected by environments that contain traces of aggressive substances. There- fore, we recommend that customers minimize device exposure to aggressive substances during storage, production, and use. Devices that showed visible discoloration when tested using the described tests above did show no performance deviations within failure limits during the stated test duration. Respective failure limits are described in the IEC60810. Important notes of operation for laser diode a) Electrical operation OSRAMs laser diodes are designed for maximum performance and reliability. Operating the laser diode above the maximum rating even for very short periods of time can damage the laser diode or reduce its lifetime. The laser diode must be operated with a suitable power supply with minimized electrical noise. The laser diode is very sensitive to electrostatic discharge (ESD). Proper precautions must be taken. b) Mounting instructions In order to maintain the lifetime of the laser diode proper heat management is essential. Due to the design of the laser diode heat is dissipated only through the base plate of the diode‘s body. A proper heat conduct- ing interconnection between the diodes base plate and the heat sink must be maintained. For further application related informations please visit www.osram-os.com/appnotes
11 Version 0.2 | 2018-11-26 Preliminary datasheet version Disclaimer OSRAM OS assumes no liability whatsoever for any use of this document or its content by recipient includ- ing, but not limited to, for any design in activities based on this preliminary draft version. OSRAM OS may e.g. decide at its sole discretion to stop developing and/or finalising the underlying design at any time. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on the OSRAM OS webside. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Product safety devices/applications or medical devices/applications OSRAM OS components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices. In case Buyer – or Customer supplied by Buyer– considers using OSRAM OS components in product safety devices/applications or medical devices/applications, Buyer and/or Customer has to inform the local sales partner of OSRAM OS immediately and OSRAM OS and Buyer and /or Customer will analyze and coordi- nate the customer-specific request between OSRAM OS and Buyer and/or Customer.
12 Version 0.2 | 2018-11-26 Preliminary datasheet version Glossary 1) Reverse Operation: Reverse Operation of 10 hours is permissible in total. Continuous reverse opera- tion is not allowed. 2) Monitor current: Monitor current refers to a reverse voltage of VRPD = 5 V. Monitor current is for short time power reference purpose only. Not guaranteed for accuracy. 3) Monitor current: For reference only. 4) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic- es, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could dif- fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 5) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and dimensions are specified in mm.
13 Version 0.2 | 2018-11-26 Preliminary datasheet version Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved.