SPF0AF0A

SPF0AF0A SEOUL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 20

Technical content

Description

www.seoulsemicon.com Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED

• Architectural
• Entertainment RoHS
• Compact Package Size
• 3 Chips in a Package
• Pb-Free Reflow Soldering Application
• RoHS Compliant SPF0AF0A (3030 RGB 3 in 1) S1C0-3030000000-00000000-00003 High lumen output and efficacy
• It has a substrate made up of a molded plastic reflector sitting on top of a lead frame.
• The package design coupled with careful selection of component materials allow these products to perform with high reliability.

www.seoulsemicon.com2 Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED Table of Contents Index

• Product Brief 1
• Table of Contents 2
• Performance Characteristics 3
• Characteristics Graph 4
• Color Bin Structure 9
• Mechanical Dimensions 10
• Recommended Solder Pad 11
• Reflow Soldering Characteristics 12
• Emitter Tape & Reel Packaging 13
• Packaging Information 14
• Product Nomenclature 15
• Handling of Silicone Resin for LEDs 16
• Precaution for Use 17
• Company Information 20

Table 1. Electro-Optical Characteristics, IF=150mA, Tj=25℃, RH30% (4) It is recommended to use it in the condition that the reliability is secured within the max value.

• LED’s properties might be different from suggested values like above and below tables if operation condition will be exceeded our parameter range. Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product.
• Thermal resistance can be increased substantially depending on the heat sink design/operating condition, and the maximum possible driving current will decrease accordingly.
• All measurements were made under the standardized environment of Seoul Semiconductor. Parameter Symbol Value Unit Min. Typ. Max. Forward Current IF - - 180 mA Junction Temperature Tj - - 125 ºC Operating Temperature Top - 40 - 105 ºC Storage Temperature Tstg - 40 - 105 ºC ESD Sensitivity(HBM) 1 - - kV

Table 2. Absolute Maximum Ratings

www.seoulsemicon.com4 Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED Characteristics Graph 380 430 480 530 580 630 680 730 780 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Red Green Blue Relative Intensity (a.u.) Wavelength [nm] Fig 1. Color Spectrum, IF=150mA, Tj=25℃

www.seoulsemicon.com5 Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED Characteristics Graph 0 40 80 120 160 200 100 120 140 160 Red Green Blue Relative Luminous Flux [%] Forward Current [mA] 120 160 200 Red Green Blue Forward Current [mA] Forward Voltage [V] Fig 2. Forward Voltage vs. Forward Current, Tj=25℃ Fig 3. Forward Current vs. Relative Luminous Flux, Tj=25℃

www.seoulsemicon.com6 Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED Characteristics Graph 25 45 65 85 105 125 100 110 Red Green Blue Relative Forward Voltage [%] Junction Temperature [ o 0 40 80 120 160 200 -0.05 -0.03 -0.01 0.01 0.03 0.05 Green CIE x Green CIE y Blue CIE x Blue CIE y Red CIE x Red CIE y CIE x,y Variation Forward Current [mA] Fig 4. Forward Current vs. CIE x,y Shift, Tj=25℃ Fig 5. Junction Temperature vs. Relative Forward Voltage, IF=150mA

www.seoulsemicon.com7 Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED Characteristics Graph 25 45 65 85 105 125 -0.05 -0.03 -0.01 0.01 0.03 0.05 Green CIE x Green CIE y Blue CIE x Blue CIE y Red CIE x Red CIE y CIE x,y Variation Junction Temperature [ o 25 45 65 85 105 125 100 Red Green Blue Relative Luminous Flux [%] Junction Temperature [ o Fig 6. Junction Temperature vs. Relative Luminous Flux, IF=150mA Fig 7. Junction Temperature vs. vs. CIE x,y Shift, IF=150mA

www.seoulsemicon.com8 Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED Characteristics Graph 0 20 40 60 80 100 120 120 180 240 Red Green Blue Maximum Current [mA] Surface Temperature [ o Fig 8. Surface Temperature vs. Maximum Forward Current, Tj(max.)=125oC

Table 3. Bin Code description, IF=150mA, Tj=25℃

• Tolerance : VF ±0.1V, ФV ±7%, λd ±2nm
• All measurements were made under the standardized environment of Seoul Semiconductor.

www.seoulsemicon.com10 Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED Mechanical Dimensions (1) All dimensions are in millimeters. (2) Scale : none (3) Undefined tolerance is ±0.2mm (4) Thermal pad and red color anode pad are connected Top View Bottom View Side View Circuit

www.seoulsemicon.com11 Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED Recommended Solder Pad (1) All dimensions are in millimeters. (2) Scale : none (3) This drawing without tolerances are for reference only. (4) Undefined tolerance is ±0.1mm.

www.seoulsemicon.com12 Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED Reflow Soldering Characteristics Caution (1) Reflow soldering is recommended not to be done more than two times. In the case of more than 24 hours passed soldering after first, LED will be damaged. (2) Repairs should not be done after the LED have been soldered. When repair is unavoidable, suitable tools must be used. (3) Die slug is to be soldered. (4) When soldering, do not put stress on the LED during heating. (5) After soldering, do not warp the circuit board. IPC/JEDEC J-STD-020 Profile Feature Sn-Pb Eutectic Assembly Pb-Free Assembly Average ramp-up rate (Tsmax to Tp) 3° C/second max. 3° C/second max. Preheat - Temperature Min (Tsmin) - Temperature Max (Tsmax) - Time (Tsmin to Tsmax) (ts) 100 °C 150 °C 60-120 seconds 150 °C 200 °C 60-180 seconds Time maintained above: - Temperature (TL) - Time (tL) 183 °C 60-150 seconds 217 °C 60-150 seconds Peak Temperature (Tp) 215℃ 260℃ Time within 5°C of actual Peak Temperature (tp)2 10-30 seconds 20-40 seconds Ramp-down Rate 6 °C/second max. 6 °C/second max. Time 25°C to Peak Temperature 6 minutes max. 8 minutes max.

www.seoulsemicon.com13 Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED Emitter Tape & Reel Packaging (1) Quantity : Max 2500pcs/Reel (2) Cumulative Tolerance : Cumulative Tolerance/10 pitches to be ±0.25mm (3) Adhesion Strength of Cover Tape Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at the angle of 10˚ to the carrier tape. (3) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package (4) unit = mm

www.seoulsemicon.com14 Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED Packaging Information Reel Aluminum Bag Outer Box

Table 4. Part Numbering System : X1X2X3X4X5X6X7X8 Table 5. Lot Numbering System : Y1Y2Y3Y4Y5Y6Y8Y9Y10 – Y11Y12Y13 –Y14Y15Y16 –Y17Y18Y19Y20Y21Y22Y23

www.seoulsemicon.com16 Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED Handling of Silicone Resin for LED (1) During processing, mechanical stress on the surface should be minimized as much as possible. Sharp objects of all types should not be used to pierce the sealing compound. (2) In general, LED should only be handled from the side. By the way, this also applies to LED without a silicone sealant, since the surface can also become scratched. (3) When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevented. This is assured by choosing a pick and place nozzle which is larger than the LED’s reflector area. (4) Silicone differs from materials conventionally used for the manufacturing of LEDs. These conditions must be considered during the handling of such devices. Compared to standard encapsulants, silicone is generally softer, and the surface is more likely to attract dust. As mentioned previously, the increased sensitivity to dust requires special care during processing. In cases where a minimal level of dirt and dust particles cannot be guaranteed, a suitable cleaning solution must be applied to the surface after the soldering of components. (5) Seoul Semiconductor suggests using isopropyl alcohol for cleaning. In case other solvents are used, it must be assured that these solvents do not dissolve the package or resin. Ultrasonic cleaning is not recommended. Ultrasonic cleaning may cause damage to the LED. (6) Please do not mold this product into another resin (epoxy, urethane, etc) and do not handle this product with acid or sulfur material in sealed space. (7) Avoid leaving fingerprints on silicone resin parts.

www.seoulsemicon.com17 Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED Precaution for Use (1) Storage To avoid the moisture penetration, we recommend store in a dry box with a desiccant . The recommended storage temperature range is 5℃ to 30℃ and a maximum humidity of RH50%. (2) Use Precaution after Opening the Packaging Use SMT techniques properly when you solder the LED as separation of the lens may affect the light output efficiency. Pay attention to the following: a. Recommend conditions after opening the package - Sealing / Temperature : 5 ~ 40℃ Humidity : less than RH30% b. If the package has been opened more than 4 weeks (MSL 2a) or the color of the desiccant changes, components should be dried for 10-12hr at 60±5℃ (3) Do not apply mechanical force or excess vibration during the cooling process to normal temperature after soldering. (4) Do not rapidly cool device after soldering. (5) Components should not be mounted on warped (non coplanar) portion of PCB. (6) Radioactive exposure is not considered for the products listed here in. (7) Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or shredded in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed of. (8) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA (Isopropyl Alcohol) should be used. (9) When the LED are in operation the maximum current should be decided after measuring the package temperature. (10) The appearance and specifications of the product may be modified for improvement without notice. (11) Long time exposure of sunlight or occasional UV exposure will cause lens discoloration.

www.seoulsemicon.com18 Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED Precaution for Use (12) VOCs (Volatile organic compounds) emitted from materials used in the construction of fixtures can penetrate silicone encapsulants of LED and discolor when exposed to heat and photonic energy. The result can be a significant loss of light output from the fixture. Knowledge of the properties of the materials selected to be used in the construction of fixtures can help prevent these issues. (13) Attaching LEDs, do not use adhesives that outgas organic vapor. (14) The driving circuit must be designed to allow forward voltage only when it is ON or OFF. If the reverse voltage is applied to LED, migration can be generated resulting in LED damage. (15) LED is sensitive to Electro-Static Discharge (ESD) and Electrical Over Stress (EOS). Below is a list of suggestions that Seoul Semiconductor purposes to minimize these effects. a. ESD (Electro Static Discharge) Electrostatic discharge (ESD) is the defined as the release of static electricity when two objects come into contact. While most ESD events are considered harmless, it can be an expensive problem in many industrial environments during production and storage. The damage from ESD to an LED may cause the product to demonstrate unusual characteristics such as: - Increase in reverse leakage current lowered turn-on voltage - Abnormal emissions from the LED at low current The following recommendations are suggested to help minimize the potential for an ESD event. One or more recommended work area suggestions: - Ionizing fan setup - ESD table/shelf mat made of conductive materials - ESD safe storage containers One or more personnel suggestion options: - Antistatic wrist-strap - Antistatic material shoes - Antistatic clothes Environmental controls: - Humidity control (ESD gets worse in a dry environment)

www.seoulsemicon.com19 Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED Precaution for Use b. EOS (Electrical Over Stress) Electrical Over-Stress (EOS) is defined as damage that may occur when an electronic device is subjected to a current or voltage that is beyond the maximum specification limits of the device. The effects from an EOS event can be noticed through product performance like: - Changes to the performance of the LED package (If the damage is around the bond pad area and since the package is completely encapsulated the package may turn on but flicker show severe performance degradation.) - Changes to the light output of the luminaire from component failure - Components on the board not operating at determined drive power Failure of performance from entire fixture due to changes in circuit voltage and current across total circuit causing trickle down failures. It is impossible to predict the failure mode of every LED exposed to electrical overstress as the failure modes have been investigated to vary, but there are some common signs that will indicate an EOS event has occurred: - Damaged may be noticed to the bond wires (appearing similar to a blown fuse) - Damage to the bond pads located on the emission surface of the LED package (shadowing can be noticed around the bond pads while viewing through a microscope) - Anomalies noticed in the encapsulation and phosphor around the bond wires. - This damage usually appears due to the thermal stress produced during the EOS event. c. To help minimize the damage from an EOS event Seoul Semiconductor recommends utilizing: - A surge protection circuit - An appropriately rated over voltage protection device - A current limiting device

www.seoulsemicon.com20 Product Data Sheet Rev1.6, Jan. 2021 S1C0-3030000000-00000000-00003-RGB-LED Company Information Published by Seoul Semiconductor © 2013 All Rights Reserved. Company Information Seoul Semiconductor (www.SeoulSemicon.com) manufacturers and packages a wide selection of light emitting diodes (LEDs) for the automotive, general illumination/lighting, Home appliance, signage and back lighting markets. The company is the world’s fifth largest LED supplier, holding more than 10,000 patents globally, while offering a wide range of LED technology and production capacity in areas such as “nPola”, "Acrich", the world’s first commercially produced AC LED, and "Acrich MJT - Multi-Junction Technology" a proprietary family of high-voltage LEDs. The company’s broad product portfolio includes a wide array of package and device choices such as Acrich and Acirch2, high-brightness LEDs, mid-power LEDs, side-view LEDs, and through-hole type LED as well as custom modules, displays, and sensors. Legal Disclaimer Information in this document is provided in connection with Seoul Semiconductor products. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Seoul Semiconductor hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. The appearance and specifications of the product can be changed to improve the quality and/or performance without notice.