SLP35 NPM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Your Partner in Motion Control SLP35 Acculine Stage Rated Spec Unit Specification Encoder Resolution µm 1 (HEIDENHAIN LIDA279) Continuous Force N 185 Acceleration Force1 N 970 Continuous Current2 A 2.7 Acceleration Current1 A 14.4 Force Constant (Kf) N/A rms 68 Back-EMF Constant V/m/s 22 Resistance3 ohm 7.2 Inductance3 mH 12 Magnetic Pitch (N-N) mm 120 Maximum Acceleration4 G 3.5 Maximum Velocity4, 5 m/s 3 Bi-Directional Repeatability mm ±0.0005 Max Load, Horizontal kg 60 Load Capacity kg 30 Stroke, Single Forcer6 mm 300-2000 (100 interval) Stroke, Double Forcer6 mm 300-1700 (100 interval) Operating Temperature °C 0~+40 Operating Humidity % 20~80 (no condensation) Storage Temperature °C −20~+60 Moving Mass kg 4.4 Note 1: Acceleration Force given is based on the output with the use of the following driver - SLP35: (14) Hitachi Production Machine System ADA3-01LL2 Note 2: The effective amperage when the temperature increase of the coil front becomes 110K. Note 3: An average value of U-V, U-W, and V-W. Note 4: There are instances when this is not achieved due to load or operation specifications. Note 5: There are instances when this is not achieved due to the length of the stroke. Note 6: Contact NPA for longer stroke lengths. 90° 45° F‑V Curve GHR25 Velocity, m/s 01234 Acc. Force Cont. Force Force (N) Velocity (m/s) F-V Curve SLP35 1200 1000 800 600 400 200 * Driven by ADA3-01LL2 driver with 200 AC input. Acc. Force Load (kg) Max Acceleration (G) 5.5 4.5 3.5 2.5 1.5 0.5 A-L Curve SLP35 0 10 20 30 40 50 60 70 * Driven by ADA3-01LL2 driver with 200 AC input. 1 2 3 4 5 6 7 Count Error (µm) Repeatability SLP35 Cont. Force Load 0° 45° 90° Horizontal 10kg 1000 1000 1000 20kg 1000 900 1000 30kg 940 780 1000 40kg 840 660 1000 50kg 750 590 950 60kg 680 540 900 Wall 5kg 1000 1000 700 10kg 1000 900 600 15kg 1000 810 520 20kg 1000 710 430 25kg 980 620 350 30kg 890 530 300 Overhanging Weight Tolerance (mm) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 F-V Curve Max. Acceleration vs. Load

  • High Thrust, High Speed, High Responsiveness, High Precision, Long Stroke
  • Simple Design and Easy Installation
  • Non-Contact Drive means Low Noise, Long Lifespan, and Maintenance-Free Stage Specifications Position Repeatability Pin Signal Wire Color Function

1 A+ White Incremental Signal

3 B+ Green Incremental Signal

7 Z- Black/Yellow Reference Mark

9 A- Black/White Incremental Signal

11 B- Black/Green Incremental Signal

14 Z+ Yellow Reference Mark

(mm) L (mm) N Weight (Kg) 300 630 6 17 400 730 7 30 500 830 8 21 600 930 9 23 700 1030 10 25 800 1130 11 26 900 1230 12 28 1000 1330 13 30 1100 1430 14 32 1200 1530 15 34 Motor Cable Specifications Hitachi Cable UL2570 AWG 18 U-red; V-white; W-black Outer Diameter ø 6.1 JST HL Connector (male) Encoder Cable Specifications Heindenhain Outer Diameter ø 4.3 Dsub 15 Pin Connector (Male) Stroke (mm) L (mm) N Weight (Kg) 300 920 9 28 400 1020 10 30 500 1120 11 32 600 1220 12 33 700 1320 13 35 800 1420 14 37 900 1520 15 39 2-ø6H7 Depth 15 170 280 90 90 20 (Including mechanical stop) 4-M8 Depth 15 (140) (140) L Stroke 30 (Including mechanical stop) Encoder Cable Power Supply Cable 100 110 5.3 8.5 4.5 2 Pitch 100 x (N-1)2xN-M6 Depth 10 2xN-ø6.5 Drill φ11 Countersink Depth 6.5 (From rear) P Q 163 186 70 70 7035 For frame ground terminal FG label Single Slider Dimensions Double Slider Dimensions 2-ø6H7 Depth 15 170 280 90 90 20 (Including mechanical stop) 4-M8 Depth 15 (140) L Stroke 30 (Including mechanical stop) Encoder Cable Power Supply Cable 100 110 5.3 8.5 4.5 2 Pitch 100 x (N-1) 2xN-M6 Depth 10 2xN-ø6.5 Drill φ6.5 Countersink Depth 6.5 (From rear) P Q 163 186 70 70 7035 For frame ground terminal FG label 5 (mechanical stop) 5 (mechanical stop) For frame ground terminal FG label 280 4-M5 Depth 10 All units are listed as mm All units are listed as mm(140) (140) (140) Detail For P&Q Detail For P&Q N = sets of holes on stage N = sets of holes on stage Motor Cable Specifications Hitachi Cable UL2570 AWG 18 U-red; V-white; W-black Outer Diameter ø 6.1 JST HL Connector (male) Encoder Cable Specifications Heidenhain Outer Diameter ø 4.3 Dsub 15 Pin Connector (Male) Nippon Pulse Your Partner in Motion Control