SLP15 NPM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Rated Spec Unit Specification Encoder Resolution µm 1 (HEIDENHAIN LIDA279) Continuous Force N 17 Acceleration Force1 N 90 Continuous Current2 A 0.51 Acceleration Current1 A 2.7 Force Constant (Kf) N/A rms 33 Back-EMF Constant V/m/s 11 Resistance3 ohm 56 Inductance3 mH 24 Magnetic Pitch (N-N) mm 60 Maximum Acceleration4 G 3.5 Maximum Velocity4, 5 m/s 3.0 Bi-Directional Repeatability mm ±0.0005 Max Load, Horizontal kg 5.0 Load Capacity kg 3.0 Stroke, Single Forcer6 mm 100~2000 (100 interval) Stroke, Double Forcer6 mm 100~1800 (100 interval) Operating Temperature °C 0~+40 Operating Humidity % 20~80 (no condensation) Storage Temperature °C −20~+60 Moving Mass kg 0.5 Note 1: Acceleration Force given is based on the output with the use of the following driver - SLP15: (14) Hitachi Production Machine System ADA3-01LL2 Note 2: The effective amperage when the temperature increase of the coil front becomes 110K Note 3: An average value of U-V, U-W, and V-W Note 4: There are instances when this is not achieved due to load or operation specifications Note 5: There are instances when this is not achieved due to the length of the stroke Note 6: Contact NPA for longer stroke lengths

  • High Thrust, High Speed, High Responsiveness, High Precision, Long Stroke
  • Simple Design and Easy Installation
  • Non-Contact Drive means Low Noise, Long Lifespan, and Maintenance-Free F-V Curve SLP15 Load (kg) Max Acceleration (G) 5.5 4.5 3.5 2.5 1.5 0.5 A-L Curve SLP15 0 1 2 3 4 5 6 * Driven by ADA3-01LL2 driver with 200 AC input. 1 2 3 4 5 6 7 Count Error (µm) Repeatability SLP15 Load 0° 45° 90° Horizontal 1kg 380 400 450 2kg 220 250 270 3kg 160 190 200 4kg 120 140 150 5kg 100 110 130 Wall 1kg 440 390 320 2kg 260 230 180 3kg 180 170 120 90° 45° Overhanging Weight Tolerance (mm) Stage Specifications F-V Curve Position RepeatabilityMax. Acceleration vs. Load 01234 Velocity, m/sVelocity (m/s) F‑V Curve GHR15 100 01234 Velocity, m/s Force, N Acc. Force Cont. Force ※j駆動hラCoにX日立Y@VXeム ADA3‑01LL2をgpした場合のf[^ですB* Driven by ADA3-01LL2 driver with 200 AC input. Force (N) 100 Acc. Force Cont. Force info@nipponpulse.com ׀1-540-633-1677 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Pin Signal Wire Color Function

1 A+ White Incremental Signal

3 B+ Green Incremental Signal

7 Z- Black/Yellow Reference Mark

9 A- Black/White Incremental Signal

11 B- Black/Green Incremental Signal

14 Z+ Yellow Reference Mark

Your Partner in Motion Control

(mm) L (mm) N Weight (Kg) 100 420 4 3.0 200 520 5 3.5 300 620 6 3.9 400 720 7 4.3 500 820 8 4.8 600 920 9 5.2 700 1020 10 5.6 800 1120 11 6.1 900 1220 12 6.5 1000 1320 13 6.9 1100 1420 14 7.4 1200 1520 15 7.8 2.6 1 5.8 3.3 Detail For P&Q 10 (Including Mechanical Stop) 4-M4 Depth 10 2-φ4H7 Depth 10 Stroke 10 (Including Mechanical Stop) L Encoder Cable Motor Power Supply Cable 140 25 45 45 10 40 40 40 P Q For Frame Ground Travel FG Label 4-M3 Depth 4 Opposite side is the same 100 2 x N-M3 Depth 5 Pitch 100 x (N-1) 2 x N - φ3.5 Drill φ6 Countersink Depth 3 (From Rear) Detail For P&Q 10 (Including Mechanical Stop) 4-M4 Depth 10 2-φ4H7 Depth 10 Encoder Cable Motor Power Supply Cable P Q For Frame Ground Travel FG Label 4-M3 Depth 4 Opposite side is the same 2 x N-M3 Depth 5 Pitch 100 x (N-1) 2 x N - φ3.5 Drill φ6 Countersink Depth 3 (From Rear) Stroke 20 (Including Mechanical Stop) L 5 (Mechanical Stop) 5 (Mechanical Stop) Encoder Cable Specifications Heidenhain Outer Diameter ø 4.3 mm Dsub 15 Pin Connector (Male) 5.8 3.3 12.6 454525 140 10 40 40 40 100 (80) (80) 140 (80) (80) All units are listed as mm All units are listed as mm (80) (80) Stroke (mm) L (mm) N Weight (Kg) 100 270 3 1.8 200 370 4 2.2 300 470 5 2.6 400 570 6 3.1 500 670 7 3.5 600 770 8 4.0 700 870 9 4.4 800 970 10 4.8 900 1070 11 5.3 1000 1170 12 5.7 1100 1270 13 6.1 1200 1370 14 6.6 1300 1470 15 7.0 Motor Cable Specifications Hitachi Cable UL2464 AWG 25 U-red; V-white; W-black Outer Diameter ø 4.3mm JST XM Connector (Male) N = sets of holes on stage N = sets of holes on stage Encoder Cable Specifications Heidenhain Outer Diameter ø 4.3 mm Dsub 15 Pin Connector (Male) Motor Cable Specifications Hitachi Cable UL2464 AWG 25 U-red; V-white; W-black Outer Diameter ø 4.3mm JST XM Connector (Male) info@nipponpulse.com ׀1-540-633-1677 Nippon Pulse Your Partner in Motion Control