SLP25 NPM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Rated Spec Unit Specification Encoder Resolution µm 1 (HEIDENHAIN LIDA279) Continuous Force N 80 Acceleration Force1 N 340 Continuous Current2 A 1.2 Acceleration Current1 A 5.1 Force Constant (Kf) N/A rms 66 Back-EMF Constant V/m/s 22 Resistance3 ohm 22 Inductance3 mH 31 Magnetic Pitch (N-N) mm 90 Maximum Acceleration4 G 3.5 Maximum Velocity4, 5 m/s 3.0 Bi-Directional Repeatability mm ±0.0005 Max Load, Horizontal kg 30 Load Capacity kg 15 Stroke, Single Forcer6 mm 200-2000 (100 interval) Stroke, Double Forcer6 mm 200-1800 (100 interval) Operating Temperature °C 0~+40 Operating Humidity % 20~80 (no condensation) Storage Temperature °C −20~+60 Moving Mass kg 2.7 Note 1: Acceleration Force given is based on the output with the use of the following driver - SLP25: (14) Hitachi Production Machine System ADA3-01LL2 Note 2: The effective amperage when the temperature increase of the coil front becomes 110K Note 3: An average value of U-V, U-W, and V-W Note 4: There are instances when this is not achieved due to load or operation specifications Note 5: There are instances when this is not achieved due to the length of the stroke Note 6: Contact NPA for longer stroke lengths

  • High Thrust, High Speed, High Responsiveness, High Precision, Long Stroke
  • Simple Design and Easy Installation
  • Non-Contact Drive means Low Noise, Long Lifespan, and Maintenance-Free Load 0° 45° 90° Horizontal 5kg 1000 1000 1000 10kg 1000 800 1000 15kg 800 650 1000 20kg 700 580 1000 25kg 550 500 1000 30kg 500 450 1000 Wall 3kg 1000 1000 580 6kg 1000 800 450 9kg 1000 670 400 12kg 1000 580 350 15kg 1000 500 300 90° 45° F‑V Curve GHR25 Velocity, m/s 01234 Acc. Force Cont. Force Force (N) Velocity (m/s) F-V Curve SLP25 400 350 300 250 200 150 100 * Driven by ADA3-01LL2 driver with 200 AC input. Acc. Force Cont. Force Load (kg) Max Acceleration (G) 5.5 4.5 3.5 2.5 1.5 0.5 A-L Curve SLP25 0 10 20 30 40 * Driven by ADA3-01LL2 driver with 200 AC input. 1 2 3 4 5 6 7 Count Error (µm) Repeatability SLP25 Overhanging Weight Tolerance (mm)Stage Specifications F-V Curve Position RepeatabilityMax. Acceleration vs. Load Pin Signal Wire Color Function

1 A+ White Incremental Signal

3 B+ Green Incremental Signal

7 Z- Black/Yellow Reference Mark

9 A- Black/White Incremental Signal

11 B- Black/Green Incremental Signal

14 Z+ Yellow Reference Mark

Your Partner in Motion Control

2-ø6H7 Depth 15 150 210 65 65 12.5 (Including mechanical stop) 4-M6 Depth 15 (100) (100) L Stroke 27.5 (Including mechanical stop) Encoder Cable Motor Cable 100 100 5.3 8.5 4.5 2 Pitch 100 x (N-1)2xN-M6 Depth 10 2xN-ø6.5 Drill φ6 Countersink Depth 3 (From rear) P Q 147 162 50 50 5030 For frame ground terminal

11 FG label

Motor Cable Specifications Hitachi: Power Supply Co. UL2570 AWG 18 U-red; V-white; W-black Outer Diameter ø 6.1 JST HL Connector (male) Encoder Cable Specifications Heidenhain Outer Diameter ø 4.3 Dsub 15 Pin Connector (Male) Stroke (mm) L (mm) N Weight (Kg) 200 670 7 16 300 770 8 17 400 870 9 19 500 970 10 20 600 1070 11 22 700 1170 12 23 800 1270 13 24 900 1370 14 26 1000 1470 15 27 1100 1570 16 28 1200 1670 17 30 2-ø6H7 Depth 15 150 210 65 65 12.5 (Including mechanical stop) 4-M6 Depth 15 (100) (100) L Stroke 27.5 (Including mechanical stop) Encoder Cable Motor Cable 100 100 5.3 8.5 4.5 2 Pitch 100 x (N-1) 2xN-M6 Depth 10 2xN-ø6.5 Drill φ11 Countersink Depth 6.5 (From rear) P Q 147 162 50 50 5030 For frame ground terminal FG label 5 (mechanical stop) 5 (mechanical stop) For frame ground terminal FG label Single Slider Dimensions Double Slider Dimensions All units are listed as mm All units are listed as mm(100) (100) Detail For P&Q Detail For P&Q Stroke (mm) L (mm) N Weight (Kg) 200 450 5 9.7 300 550 5 11 400 650 6 12 500 750 7 14 600 850 8 15 700 950 9 16 800 1050 10 18 900 1150 11 19 1000 1250 12 20 1100 1350 13 22 1200 1450 14 23 N = sets of holes on stage N = sets of holes on stage Motor Cable Specifications Hitachi Cable UL2570 AWG 18 U-red; V-white; W-black Outer Diameter ø 6.1 JST HL Connector (male) Encoder Cable Specifications Heidenhain Outer Diameter ø 4.3 Dsub 15 Pin Connector (Male) info@nipponpulse.com ׀1-540-633-1677 Nippon Pulse Your Partner in Motion Control