SL23EP04SC-1

SL23EP04 SPECTRALINEAR | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

Rev 1.1, May 25, 2007 Page 1 of 14 2200 Laurelwood Road, Santa Clara, CA 95054 Tel: (408) 855-0555 Fax: (408) 855-0550 www.SpectraLinear.com SL23EP04 Key Features x 10 to 220 MHz operating frequency range x Low output clock skew: 60ps-typ x Low output clock Jitter: - 35 ps-typ at 166MHz, CL=15pF and VDD=3.3V - 45 ps-typ at 166MHz, CL=15pF and VDD=2.5V x Low part-to-part output skew: 150 ps-typ x 3.3V to 2.5V power supply range x Low power dissipation: x - 12 mA-typ at 66MHz and VDD=3.3V x - 10 mA-typ at 66MHz and VDD=2.5V x One input drives 4 outputs x Multiple configurations and drive options x SpreadThru™ PLL that allows use of SSCG x Available in 8-pin SOIC package x Available in Commercial and Industrial grades

Applications

x Printers, MFPs and Digital Copiers x PCs and Work Stations x Routers, Switchers and Servers x Datacom and Telecom x High-Speed Digital Embeded Systems

Description

The SL23EP04 is a low skew, low jitter and low power Zero Delay Buffer (ZDB) designed to produce up to four (4) clock outputs from one (1) reference input clock, for high speed clock distribution applications. The product has an on-chip PLL and a feedback pin (FBK) which can be used to obtain feedback from any one of the 4 output clocks. The SL23EP04 offers X/2,1X and 2X frequency options at the output with respect to input reference clock. Refer to the “Product Configuration Table” for the details of these options. The SL23EP04-1H and -2H High Drive version operates up to 220 MHz and 200MHz at 3.3 and 2.5V power supplies respectively. The standard versions -1 and -2 operate up to 167MHz and 135MHz at 3.3V and 2.5V power supplies respectively with CL=15pF output load. The SL23EP04 enter into Power Down (PD) mode if the input at CLKIN is DC (GND to VDD). In this state all 4 output clocks are tri-stated and the PLL is turned off, leading to 8ȝA-typ power supply current draw. Benefits x Up to four (4) distribution of input clock x Standard and High-Drive levels to control impedance level, frequency range and EMI x Low skew, jitter and power dissipation Block Diagram Low Jitter and Skew 10 to 220 MHz Zero Delay Buffer (ZDB) PPrreelliimmiinnaarryy

Rev 1.1, May 25, 2007 Page 2 of 14 SL23EP04 Pin Configuration 8-Pin SOIC Pin Description Pin Number Pin Name Pin Type Pin Description 1 CLKIN Input Reference Frequency Clock Input. Weak pull-down (250k ȍ). 2 CLKA1 Output Buffered Clock Output Weak pull-down (250k ȍ). 3 CLKA2 Output Buffered Clock Output. Weak pull-down (250k ȍ). 4 GND Power Power Ground. 5 CLKB1 Output Buffered Clock Output. Weak pull-down (250k ȍ). 6 CLKB2 Output Buffered Clock Output. Weak pull-down (250k ȍ). 7 VDD Power 2.5V to 3.3V Power Supply. 8 FBK Input PLL Feedback Input. This pin must be connected to one of the clock outputs.

with very low operating current. clock for systems requiring clock distribution. electrical tables for the details of the drive levels. since FBK pin is the feedback to the internal PLL. SL23EP04 I/O is powered by using VDD. Table 1. Available SL23EP04 Configurations

Rev 1.1, May 25, 2007 Page 4 of 14 SL23EP04 Absolute Maximum Ratings (All Products) Description Condition Min Max Unit Supply voltage, VDD -0.5 4.6 V All Inputs and Outputs -0.5 VDD+0.5 V Ambient Operating Temperature In operation, C-Grade 0 70 °C Ambient Operating Temperature In operation, I-Grade -40 85 °C Storage Temperature No power is applied -65 150 °C Junction Temperature In operation, power is applied - 125 °C Soldering Temperature - 260 °C ESD Rating (Human Body Model) MIL-STD-883, Method 3015 2000 - V Operating Conditions (C-Grade and VDD=3.3V) Unless otherwise stated VDD= 3.3V+/- 10%, CL=15pF and Ambient Temperature range 0 to +70°C Description Symbol Condition Min Typ Max Unit Operating Voltage VDD VDD+/-10% 2.97 3.3 3.63 V Operating Temperature TA Ambient Temperature 0 - 70 °C Input Capacitance VIH Pins 1 and 8 - 5 7 pF Unless otherwise stated VDD= 3.3V+/- 10%, CL=15pF and Ambient Temperature range 0 to +70°C Description Symbol Condition Min Typ Max Unit Input LOW Voltage VINL CLKIN and FBK – – 0.8 V Input HIGH Voltage VINH CLKIN and FBK 2.0 – VDD+0.3 V Input LOW Current IINL 0 < VIN < 0.8V CLKIN and FBK –2 0 5 0 µ A Input HIGH Current IINH 2.4V < VIN < VDD CLKIN and FBK –2 0 5 0 µ A Input LOW Voltage VINL CLKIN and FBK – – 0.8 V Input HIGH Voltage VINH CLKIN and FBK 2.0 – VDD+0.3 V Input LOW Current IINL 0 < VIN < 0.8V CLKIN and FBK –2 0 5 0 µ A Input HIGH Current IINH 2.4V < VIN < VDD CLKIN and FBK –2 0 5 0 µ A IOL = 8 mA ( -1, -2 drives) – – 0.4 V Output LOW Voltage VOL IOL = 12 mA (-1H, -2H drives) – – 0.4 V

Rev 1.1, May 25, 2007 Page 5 of 14 SL23EP04 Unless otherwise stated VDD= 3.3V+/- 10%, CL=15pF and Ambient Temperature range 0 to +70°C Description Symbol Condition Min Typ Max Unit IOH = –8 mA (-1, -2 drives) 2.4 – – V Output HIGH Voltage VOH IOH = –12 mA (-1H, -2H drives) 2.4 – – V Power Down Supply Current IDDPD Measured when CLKIN= GND to VDD or floating –81 2 µ A Power Supply Current IDD1 All Outputs CL=0, 33.3 MHz CLKIN All versions –1 01 4 m A Power Supply Current IDD2 All Outputs CL=0, 66.6 MHz CLKIN All versions –1 21 7 m A Power Supply Current IDD3 All Outputs CL=0, 133.3 MHz CLKIN All versions –1 42 0 m A Power Supply Current IDD4 All Outputs CL=0, 166.6 MHz CLKIN All versions –1 62 3 m A Pull-down Resistors RPD Pin-1, 2, 3, 5, and 6 150 250 350 k ȍ Switching Electrical Characteristics (C-Grade and VDD=3.3V) Unless otherwise stated VDD= 3.3V+/- 10%, CL=15pF and Ambient Temperature range 0 to +70°C Description Symbol Condition Min Typ Max Unit FOUT1 CL=15pf, -1H and -2H versions 10 - 220 MHz FOUT2 CL=22pf, -1H and -2H versions 10 - 200 MHz FOUT3 CL=30pf, -1H and -2H versions 10 - 135 MHz FOUT4 CL=15pf, -1, and -2 versions 10 - 200 MHz FOUT5 CL=22pf, -1 and -2 versions 10 - 135 MHz Output Frequency Range FOUT6 CL=30pf, -1 and -2 versions 10 - 100 MHz Input Duty Cycle DC1 Measured at VDD/2, all versions 30 50 70 % Output Duty Cycle DC2 CL=30pF, Fout=66 MHz, all versions Measured at 1.4V 40 50 60 % Output Duty Cycle DC3 CL=15pF, Fout=66 MHz, all versions Measured at VDD/2 45 50 55 % Output Duty Cycle DC4 CL=15pF, Fout=133 MHz, all versions Measured at VDD/2 45 50 55 % Output Duty Cycle DC5 CL=15pF, Fout=166 MHz, all versions Measured at VDD/2 45 50 55 % Output Rise/Fall Time tr/f1 CL=15pF, -1 and -2 versions - - 2.2 ns Output Rise/Fall Time tr/f2 CL=15pF, -1 and -2 versions - - 1.5 ns Output Rise/Fall Time tr/f3 CL=30pF -1H and -2H version - - 1.5 ns

Rev 1.1, May 25, 2007 Page 6 of 14 SL23EP04 Switching Electrical Characteristics (C-Grade and VDD=3.3V) Unless otherwise stated VDD= 3.3V+/- 10%, CL=15pF and Ambient Temperature range 0 to +70°C Output Rise/Fall Time tr/f4 CL=15pF -1H and -2H version - - 1.2 ns Output-to-Output Skew on Same Bank SKW1 -1 and -2 measured at VDD/2 and outputs are equally loaded - 70 150 ps Output-to-Output Skew on Same Bank SKW2 -1H and -2H measured at VDD/2 and outputs are equally loaded - 60 125 ps Output-to-Output Skew Between Bank A and B SKW3 -1 and -2 measured at VDD/2 and outputs are equally loaded - 110 250 ps Output-to-Output Skew Between Bank A and B SKW4 -1H and -2H measured at VDD/2 and outputs are equally loaded - 90 200 ps Device-to-Device Skew SKW5 All versions, measured at VDD/2 and outputs are equally loaded - 150 400 ps Input-to-Output Delay Dt All versions, CLKIN to FBK rising edge, measured at VDD/2 and outputs are equally loaded -200 +/-70 200 ps Fout=66.6 MHz and CL=15pF - 50 100 ps Fout=66.6MHz and CL=30PF - 70 150 psCycle-to-Cycle Jitter (-1 and, -2 Versions) CCJ1 Fout=133.3MHz and CL=15pF - 40 80 ps Fout=66.6 MHz and CL=15pF - 40 80 ps Fout=66.6MHz and CL=30PF - 60 130 psCycle-to-Cycle Jitter (-1H and -2H Versions) CCJ2 Fout=166.6MHz and CL=15pF - 35 70 ps PLL Lock Time tLOCK From 0.95VDD and valid clock presented at CLKIN - - 1.0 ms Operating Conditions (I-Grade and VDD=3.3V) Unless otherwise stated VDD= 3.3V+/- 10%, CL=15pF and Ambient Temperature range -40 to +85°C Description Symbol Condition Min Typ Max Unit Operating Voltage VDD VDD+/-10% 2.97 3.3 3.63 V Operating Temperature TA Ambient Temperature -40 - 85 °C Input Capacitance VIH Pins 1 and 8 - 5 8 pF

Rev 1.1, May 25, 2007 Page 7 of 14 SL23EP04 Unless otherwise stated VDD= 3.3V+/- 10%, CL=15pF and Ambient Temperature range -40 to +85° Description Symbol Condition Min Typ Max Unit Input LOW Voltage VINL CLKIN and FBK – – 0.8 V Input HIGH Voltage VINH CLKIN and FBK 2.0 – VDD+0.3 V Input LOW Current IINL 0 < VIN < 0.8V CLKIN and FBK –2 55 0 µ A Input HIGH Current IINH 2.4V < VIN < VDD CLKIN and FBK –2 55 0 µ A IOL = 8 mA ( -1, -2 drives) – – 0.4 V Output LOW Voltage VOL IOL = 12 mA ( -1H, -2H drives) – – 0.4 V IOH = –8 mA (-1, -2 drives) 2.4 – – V Output HIGH Voltage VOH IOH = –12 mA ( -1H, -2H drives) 2.4 – – V Power Down Supply Current IDDPD Measured when CLKIN= GND to VDD or floating –1 21 8 µ A Power Supply Current IDD1 All Outputs CL=0, 33.3 MHz CLKIN All versions –1 21 7 m A Power Supply Current IDD2 All Outputs CL=0, 66.6 MHz CLKIN All versions –1 42 0 m A Power Supply Current IDD3 All Outputs CL=0, 133.3 MHz CLKIN All versions –1 62 2 m A Power Supply Current IDD4 All Outputs CL=0, 166.6 MHz CLKIN All versions –1 82 5 m A Pull-down Resistors RPD Pin-1, 2, 3, 5 and 6 125 250 375 k ȍ

Rev 1.1, May 25, 2007 Page 8 of 14 SL23EP04 Unless otherwise stated VDD= 2.5V+/- 10%, CL=15pF and Ambient Temperature range 0 to +70°C Description Symbol Condition Min Typ Max Unit Input LOW Voltage VINL CLKIN and FBK – – 0.7 V Input HIGH Voltage VINH CLKIN and FBK 1.7 – VDD+0.3 V Input LOW Current IINL 0 < VIN < 0.8V CLKIN and FBK –2 05 0 µ A Input HIGH Current IINH 2.4V < VIN < VDD CLKIN and FBK –2 05 0 µ A IOL = 6 mA, -1 and -2 versions – – 0.3 V Output LOW Voltage VOL IOL = 8 mA, -1H and -2H versions – – 0.3 V IOH = –6 mA, -1 and -2 versions 2.0 – – V Output HIGH Voltage VOH IOH = –8 mA, -1H and -2H versions 2.0 – – V Power Down Supply Current IDDPD Measured when CLKIN= GND to VDD or floating –1 01 8 µ A Power Supply Current IDD1 All Outputs CL=0, 33.3 MHz CLKIN All versions – 8 11 mA Power Supply Current IDD2 All Outputs CL=0, 66.6 MHz CLKIN All versions –1 01 4 mA Power Supply Current IDD3 All Outputs CL=0, 133.3 MHz CLKIN All versions –1 21 7 m A Power Supply Current IDD4 All Outputs CL=0, 166.6 MHz CLKIN All versions –1 42 0 m A Pull-down Resistors RPD Pin-1, 2, 3, 5 and 6 150 250 350 k ȍ Switching Electrical Characteristics (C-Grade and VDD=2.5V) Unless otherwise stated VDD= 2.5+/- 10%, CL=15pF and Ambient Temperature range 0 to +70°C Description Symbol Condition Min Typ Max Unit FOUT1 CL=15pf, -1H and -2H versions 10 - 175 MHz FOUT2 CL=22pf, -1H and -2H versions 10 - 135 MHz FOUT1 CL=30pf, -1H and -2H versions 10 - 100 MHz FOUT4 CL=15pf, -1 and -2 versions 10 - 135 MHz FOUT5 CL=22pf, -1 and -2 versions 10 - 100 MHz Output Frequency Range FOUT6 CL=30pf, -1 and -2 versions 10 - 75 MHz

Rev 1.1, May 25, 2007 Page 9 of 14 SL23EP04 Input Duty Cycle DC1 Measured at VDD/2, all versions 40 50 60 % Output Duty Cycle DC2 CL=15pF, Fout=66 MHz, all versions Measured at VDD/2 45 50 55 % Output Duty Cycle DC3 CL=15pF, Fout=133 MHz, all versions Measured at VDD/2 45 50 55 % Output Duty Cycle DC4 CL=15pF, Fout=166 MHz, all versions Measured at VDD/2 40 50 60 % Output Rise/Fall Time tr/f1 CL=30pF, -1 and -2 versions Measured at 0.6 to 1.8V - - 2.4 ns Output Rise/Fall Time tr/f2 CL=15pF, -1 and -2 versions Measured at 0.6 to 1.8V - - 1.7 ns Output Rise/Fall Time tr/f3 CL=30pF, -1H and -2H versions Measured at 0.6 to 1.8V - - 1.7 ns Output Rise/Fall Time tr/f4 CL=15pF, -1H and -2H versions Measured at 0.6 to 1.8V - - 1.4 ns Output-to-Output Skew on Same Bank SKW1 -1 and -2, measured at VDD/2 and outputs are equally loaded - 80 175 ps Output-to-Output Skew on Same Bank SKW2 -1H and -2H, measured at VDD/2 and outputs are equally loaded - 70 150 ps Output-to-Output Skew Between Bank A and B SKW3 -1 and -2, measured at VDD/2 and outputs are equally loaded - 125 300 ps Output-to-Output Skew Between Bank A and B SKW4 -1H and -2H, measured at VDD/2 and outputs are equally loaded - 110 250 ps Device-to-Device Skew SKW5 All versions, measured at VDD/2 and outputs are equally loaded - 175 450 ps Input-to-Output Delay Dt All versions, CLKIN to FBK rising edge, measured at VDD/2 and outputs are equally loaded -250 +/-90 250 ps Fout=66.6 MHz and CL=15pF - 70 140 psCycle-to-Cycle Jitter (-1 and -2 Versions) CCJ1 Fout=133.3 MHz and CL=15pF - 60 120 ps Switching Electrical Characteristics (C-Grade and VDD=2.5V) Unless otherwise stated VDD= 2.5+/- 10%, CL=15pF and Ambient Temperature range 0 to +70°C Fout=66.6 MHz and CL=15pF - 60 120 psCycle-to-Cycle Jitter (-1H and -2H Versions) CCJ2 Fout=166.6 MHz and CL=15pF - 50 100 ps PLL Lock Time tLOCK From 0.95VDD and valid clock presented at CLKIN - - 1.0 ms

Rev 1.1, May 25, 2007 Page 10 of 14 SL23EP04 Operating Conditions (I-Grade and VDD=2.5V) Unless otherwise stated VDD= 2.5V+/- 10%, CL=15pF and Ambient Temperature range -40 to +85°C Description Symbol Condition Min Typ Max Unit Operating Voltage VDD VDD+/-10% 2.25 2.5 2.75 V Operating Temperature TA Ambient Temperature -40 - 85 °C Input Capacitance VIH Pins 1 and 8 - 5 8 pF Unless otherwise stated VDD= 2.5V+/- 10%, CL=15pF and Ambient Temperature range -40 to +85° Description Symbol Condition Min Typ Max Unit Input LOW Voltage VINL CLKIN and FBK – – 0.7 V Input HIGH Voltage VINH CLKIN and FBK 1.7 – VDD+0.3 V Input LOW Current IINL 0 < VIN < 0.8V CLKIN and FBK –3 06 0 µ A Input HIGH Current IINH 2.4V < VIN < VDD CLKIN and FBK –3 06 0 µ A IOL = 6 mA, -1 and -2 versions – – 0.3 V Output LOW Voltage VOL IOL = 8 mA, -1H and -2H versions – – 0.3 V IOH = –6 mA, -1 and -2 versions 2.0 – – V Output HIGH Voltage VOH IOH = –8 mA, -1H and -2H versions 2.0 – – V Power Down Supply Current IDDPD Measured when CLKIN= GND to VDD or floating –1 52 5 µ A Power Supply Current IDD1 All Outputs CL=0, 33.3 MHz CLKIN All versions –1 01 4 m A Power Supply Current IDD2 All Outputs CL=0, 66.6 MHz CLKIN All versions –1 21 7 m A Power Supply Current IDD3 All Outputs CL=0, 133.3 MHz CLKIN All versions –1 42 0 m A Power Supply Current IDD4 All Outputs CL=0, 133.3 MHz CLKIN All versions –1 62 4 m A Pull-down Resistors RPUD Pin-1, 2, 3, 5 and 6 125 250 375 k ȍ

Rev 1.1, May 25, 2007 Page 11 of 14 SL23EP04 Switching Electrical Characteristics (I-Grade and VDD=2.5V) Unless otherwise stated VDD= 2.5V+/- 10%, CL=15pF and Ambient Temperature range -40 to +85°C Description Symbol Condition Min Typ Max Unit FOUT1 CL=15pf, -1H and -2H versions 10 - 175 MHz FOUT2 CL=22pf, -1H and -2H versions 10 - 135 MHz FOU3 CL=30pF, -1H and -2H versions 10 - 100 MHz FOUT4 CL=15pf, -1 and -2 versions 10 - 135 MHz FOUT5 CL=22pf, -1 and -2 versions 10 - 100 MHz Output Frequency Range FOUT6 CL=30pf, -1 and -2 versions 10 - 75 MHz Input Duty Cycle DC1 Measured at VDD/2, all versions 40 50 60 % Output Duty Cycle DC2 CL=30pF, Fout=66 MHz, all versions Measured at VDD/2 40 50 60 % Output Duty Cycle DC3 CL=15pF, Fout=66 MHz, all versions Measured at VDD/2 45 50 55 % Output Duty Cycle DC4 CL=15pF, Fout=133 MHz, all versions Measured at VDD/2 45 50 55 % Output Duty Cycle DC5 CL=15pF, Fout=166 MHz, all versions Measured at VDD/2 40 50 60 % Output Rise/Fall Time tr/f1 CL=30pF, -1 and -2 versions Measured at 0.6 to 1.8V - - 2.5 ns Output Rise/Fall Time tr/f2 CL=15pF, -1 and -2 versions Measured at 0.6 to 1.8V - - 1.8 ns Output Rise/Fall Time tr/f3 CL=30pF, -1H and -2H versions Measured at 0.6 to 1.8V - - 1.8 ns Output Rise/Fall Time tr/f4 CL=15pF, -1H and -2H version Measured at 0.6 to 1.8V - - 1.5 ns Output-to-Output Skew on Same Bank SKW1 -1 and -2, measured at VDD/2, and outputs are equally loaded - 100 220 ps Output-to-Output Skew on Same Bank SKW2 -1H and -2H, measured at VDD/2 and outputs are equally loaded - 100 220 ps Output-to-Output Skew Between Bank A and B SKW3 -1 and -2, measured at VDD/2, and outputs are equally loaded - 100 220 ps Output-to-Output Skew Between Bank A and B SKW4 -1H and -2H, measured at VDD/2 and outputs are equally loaded - 180 375 ps Device-to-Device Skew SKW5 All versions, measured at VDD/2 and outputs are equally loaded - 225 550 ps Input-to-Output Delay Dt All versions, CLKIN to FBK rising edge, measured at VDD/2 and outputs are equally loaded -300 +/-125 300 ps

Rev 1.1, May 25, 2007 Page 12 of 14 SL23EP04 Switching Electrical Characteristics (I-Grade and VDD=2.5V – Cont.) Unless otherwise stated VDD= 2.5V+/- 10%, CL=15pF and Ambient Temperature range -40 to +85°C Fout=66.6 MHz and CL=15pF - 80 160 psCycle-to-Cycle Jitter (-1 and -2 Versions) CCJ1 Fout=133.3 MHz and CL=15pF - 70 140 ps Fout=66.6 MHz and CL=15pF - 70 140 psCycle-to-Cycle Jitter (-1H and -2H Versions) CCJ2 Fout=166.6 MHz and CL=15pF - 60 120 ps PLL Lock Time tLOCK From 0.95VDD and valid CLKIN - - 1.0 ms External Components & Design Considerations Typical Application Schematic Comments and Recommendations Decoupling Capacitor: A decoupling capacitor of 0.1ȝF must be used between VDD and VSS pins. Place the capacitor on the component side of the PCB as close to the VDD pin as possible. The PCB trace to the VDD pin and to the GND via should be kept as short as possible. Do not use vias between the decoupling capacitor and the VDD pin. Series Termination Resistor: A series termination resistor is recommended if the distance between the output clocks and the load is over 1 ½ inch. Place the series termination resistors as close to the clock outputs as possible. Zero Delay and Skew Control: All outputs and CLKIN pins should be loaded with the same load to achieve “Zero Delay” between the CLKIN and the outputs. The FBK pin is connected to PLL internally on-chip for feedback and should be connected to one of to output clocks externally. For applications requiring zero input/output delay, the load at the all output pins including the FBK pin must be the same. If any delay adjustment is required, the capacitance at the FBK pin could be increased or decreased to increase or decrease the delay between Bank A and B clocks relative to CLKIN. For minimum pin-to-pin skew, the external load at all the Bank A and B clocks must be the same. In addition, the rise and fall time of the reference clock at CLKIN pin should be similar to rise and fall times at the CLKA and CLK B bank outputs.

Rev 1.1, May 25, 2007 Page 13 of 14 SL23EP04 Package Outline and Package Dimensions 8-Pin SOIC (150 Mil) Thermal Characteristics Parameter Symbol Condition Min Typ Max Unit ș JA Still air - 150 - °C/W ș JA 1m/s air flow - 140 - °C/W Thermal Resistance Junction to Ambient ș JA 3m/s air flow - 120 - °C/W Thermal Resistance Junction to Case ș JC Independent of air flow - 40 - °C/W

Rev 1.1, May 25, 2007 Page 14 of 14 SL23EP04 Ordering Information [3] Ordering Number Marking Shippi ng Package Package Temperature SL23EP04SC-1 SL23EP04SC-1 Tube 8-pin SOIC 0 to 70°C SL23EP04SC-1T SL23EP04SC-1 Tape and Reel 8-pin SOIC 0 to 70°C SL23EP04SI-1 SL23EP04SI-1 Tube 8-pin SOIC -40 to 85°C SL23EP04SI-1T SL23EP04SI-1 Tape and Reel 8-pin SOIC -40 to 85°C SL23EP04SC-1H SL23EP04SC-1H Tube 8-pin SOIC 0 to 70°C SL23EP04SC-1HT SL23EP04SC-1H Tape and Reel 8-pin SOIC 0 to 70°C SL23EP04SI-1H SL23EP04SI-1H Tube 8-pin SOIC -40 to 85°C SL23EP04SI-1HT SL23EP04SI-1H Tape and Reel 8-pin SOIC -40 to 85°C SL23EP04SC-2 SL23EP04SC-2 Tube 8-pin SOIC 0 to 70°C SL23EP04SC-2T SL23EP04SC-2 Tape and Reel 8-pin SOIC 0 to 70°C SL23EP04SI-2 SL23EP04SI-2 Tube 8-pin SOIC -40 to 85°C SL23EP04SI-2T SL23EP04SI-2 Tape and Reel 8-pin SOIC -40 to 85°C SL23EP04SC-2H SL23EP04SC-2H Tube 8-pin SOIC 0 to 70°C SL23EP04SC-2HT SL23EP04SC-2H Tape and Reel 8-pin SOIC 0 to 70°C SL23EP04SI-2H SL23EP04SI-2H Tube 8-pin SOIC -40 to 85°C SL23EP04SI-2HT SL23EP04SI-2H Tape and Reel 8-pin SOIC -40 to 85°C Notes: 3. The SL23EP04 products are RoHS compliant. While SLI has reviewed all information herein for accuracy and reliability, Spectra Linear Inc. assumes no responsibility for t he use of any circuitry or for the infringement of any patents or other rights of third parties which would result from each use. Thi s product is intended for use in normal commercial applications and is not warranted not is it intended for use in life support, critical medical instruments, or any other application requiring extended temperature range, high reliability, or any other extraordinary environmental requirements unless pursuant to additional processing by Spectra Linear Inc., and an expressed written agreement by Spectra Linear Inc. Spectra Linear Inc. reserves the right to change any circuitry or specification without notice.