SHM088HBA

SHM088HBA SUPERWORLD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

S H M 0 8 8 H B A - 1 R 2 M F (a) (b) (d) (c) 1. PART NO. EXPRESSION : (b) Dimension code (c) Inductance code : 1R2 = 1.20uH (a) Series code 2. CONFIGURATION & DIMENSIONS : A 4. MATERIALS : SUPERWORLD ELECTRONICS (S) PTE LTD (a) Core : Metal Core (c) Solder : Sn99.95%-Cu0.05% 3. SCHEMATIC : (d) Tolerance code : M = ±20% (e) F : RoHS Compliant SHM088HBA SERIESDIP POWER CHOKE COIL PG. 1 NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.05.2010 PCB Pattern BCD 8.0 Max. (b) Wire : Enamelled Copper Wire Unit:m/m F 5.0±0.5 A B ØW CD F ØW 0.8±0.1 1.1 Typ. 1.0 Typ. GSeries SHM088HBA-1R2MF SHM088HBA-1R6MF f) Part temperature (ambient + temp. rise) : Shoul d not exceed 125°C under worst case operating conditions. e) Isat (A) : Will cause L to drop approximately 30% d) Irms (A) : Will cause an approximately temp. rise ǻT < 40°C a) Test Frequency : 100KHz/1.0V b) Operating temp. : -40°C to +125°C c) Ambient temp. : 20°C 5. GENERAL SPECIFICATION : (e) G 8.0 8.0 F1R2

SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 2 12.05.2010 ±20% @ 0Adc Inductance L ( uH ) 1.60 1.20 6. ELECTRICAL CHARACTERISTICS : SHM088HBA-1R2MF SHM088HBA-1R6MF Part No.

0 Irms

Max. ( A ) 2.720 18 3.4 DCRIsat Max. ( A ) ( m ȍ ) ±8% 7. CHARACTERISTICS CURVES : Inductance vs. DC Current Min. Q DIP POWER CHOKE COIL SHM088HBA SERIES 05 1 0 1 5 2 0 DC CURRENT(A) 0. 5 1. 5 INDUCTANCE (uH) TEMP. RISE(oC) HMPI088HBA-1R2MSHM088HBA-1R2MF 0369 1 2 1 5 1 8 DC CURRENT(A) INDUCTANCE (uH) TEMP. RISE(oC) HMPI088HBA-1R6MSHM088HBA-1R6MF

SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 3 12.05.2010 PERFORMANCE Refer to standard electrical characteristics list should be covered with solder. More than 90% of the terminal electrode Preheating seconds 1. Appearance : No significant abnormality 2. Inductance change : Within ±10% of initial value Preheating seconds No disconnection or short circuit. 2. Inductance : Within ±10% of initial value. 1. Appearance : No damage No disconnection or short circuit. 2. Inductance : Within ±10% of initial value. 1. Appearance : No damage Reliability Test Humidity Resistance High Temperature Life Test Life Test Low Temperature Thermal Shock Solder Heat Resistance 150°C 260°C 150°C 245°C Inductance Electrical Characteristics Test DCR Heat Rated Current (Irms) Solderability Test Mechanical Performance Test Saturation Current (Isat) 8. RELIABILITY AND TEST CONDITION : ITEM Time : 500±12 hours Applied Current : Rated Current Humidity : 90% to 95% Temperature : 40±5°C Temperature : 85±5°C Time : 500±12 hours Temperature (°C) Conditions of 1 cycle. Temperature : -20±5°C Time : 500±12 hours Room Temperature Room Temperature 85±3 -25±3 Recovery: 4 to 24hrs of recovery under the standard Total : 5 cycles Step Within 3 Within 3 30±3 Times (min.) 30±3 Preheat : 150°C, 60sec. Solder : lead free Solder Temperature : 260±5°C Flux : rosin Dip Time : 10±0.5sec. 10±0.5 seconds Dipping cooling Natural 4±1 seconds Dipping cooling Natural HP4284A or CH3302/1320/1320S TEST CONDITION Isat(A) will cause Lo to drop approximately 30% HIOKI3540 Irms(A) will cause an temp rise < 40°C typ. solder bath at 245±5°C for 5 seconds After fluxing, component shall be dipped in a melted condition after the removal from test chamber condition after the removal from test chamber Recovery: 4 to 24hrs of recovery under the standard condition after the removal from test chamber Recovery: 4 to 24hrs of recovery under the standard condition after the removal from test chamber Recovery: 4 to 24hrs of recovery under the standard DIP POWER CHOKE COIL SHM088HBA SERIES

SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 5 12.05.2010 10. PACKING AND QUANTITY : Inner Box Carton 1134 2268 Styrofoam Size 162 SHM088BHA a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils. Application Notice 2. Transportation : c) Bulk handling should ensure that abrasion and mechanical shock are minimized. b) The use of tweezers or vacuum pick up is strongly recommended for individual components. c) The packaging material should be kept where no chlorine or sulfur exists in the air. b) Recommended products should be used within 6 months from the time of delivery. a) Temperature and humidity conditions : Less than 30°C and 70% RH. To maintain the solderabililty of terminal electrodes : 1. Storage Conditions : DIP POWER CHOKE COIL SHM088HBA SERIES