SFSKA5M50CF00-R3

Murata Manufacturing Co...

(Filters/Traps/Discriminators) for Audio/Visual Equipment

Manufacturer: Murata Manufacturing Co...

Document: 77 Pages / 1Mb

Request Quote Download Datasheet Read online HTML view

More from Murata Manufacturing Co... Browse S parts

Online Datasheet

Read SFSKA5M50CF00-R3 online.

SFE10.7 MURATA1 | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 77

Technical content

Cat.No.P50E-6 CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

s All the products in this catalog comply with EU RoHS. s EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment." s For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

2 Elements Thickness Expander mode

3 Elements Thickness Expander mode

(2nd Harmonic) (3rd Overtone) E T V K Code Oscillation/Number of Elements Lead Type Chip Type Lp Cp Code Structure/Size rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M" in case of MHz. t3dB Bandwidth C D E F G H J K L M N 450kHz min 350kHz min 330kHz 280kHz 230kHz 180kHz 150kHz 110kHz 80kHz 50kHz 35kHz Code 3dB Bandwidth uSeries A0 Two-digit alphanumerics express series Code Series yCenter Frequency/Tolerance A B C D E H V W K Z M F Center Frequency mentioned by specification -30kHz shifted from center frequency of code "A" +30kHz shifted from center frequency of code "A" -60kHz shifted from center frequency of code "A" +60kHz shifted from center frequency of code "A" Center Frequency mentioned by specification -50kHz shifted from center frequency of code "H" +50kHz shifted from center frequency of code "H" Center Frequency mentioned by specification Combination of A, B, C, D, E Combination of A, B, C Nominal Center Frequency Code Center Frequency ±30kHz ±30kHz ±30kHz ±30kHz ±30kHz ±25kHz ±25kHz ±25kHz ±20kHz Tolerance

2 Elements Thickness Shear modeS

Code Oscillation/Numbers of Element Chip TypeKp Code Structure/Size p is "A" or subsequent code, which indicates the structure/size. rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M" in case of MHz. (Part Number) qProduct ID wOscillation/Numbers of Element CERAFILr for AM SF CF Ceramic Filters Ceramic Filters Three-digit alphanumerics indicate product specification of 3dB or 6dB frequency tolerance. Product ID tProduct Specification D4A Code Product Specification ppA indicates standard type. p is "A" or subsequent code, which indicates the structure/size. It varies depending on vibration mode and number of elements. eStructure/Size Bulk Embossed Taping (ø180mm) Embossed Taping (ø330mm) Magazine Cassette yPackaging -B0 -R0 -R1 -M0 Code Packaging Radial taping is applied to lead type and embossed taping to chip type. With non-standard products, three-digit alphanumerics indicating "Individual Specification" is added between "tProduct Specification" and "yPackaging."

4 Elements Area Expansion modeP

Code Oscillation/Numbers of Element Lead Type Chip Type Lp Cp/Kp Code Structure/Size y -B0 e KA w P r 455K t D4A q SF rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Capital letter "K" following three figures expresses the unit of "kHz." CERAFILr

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. Ceramic Traps y u -R0 e KA w S r 4M00 t B q TP(Part Number) qProduct ID wFunction TP Ceramic Traps Product ID tProduct Specification Code (1) B C Code Product Specification (1) With non-standard products, three-digit alphanumerics indicating "Individual Specification" is added between "yProduct Specification Code (2)" and "uPackaging." eStructure/Size Bulk Embossed Taping ø=330mm Broad bandwidth Type Low capacitance Type yProduct Specification Code (2) Code Product Specification (2) Standard Type uPackaging -B0 -R1 Code Packaging Single TrapsS Code Function Chip TypeKp Code Structure/Size p is "A" or subsequent code, which indicates the structure/size. rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M" in case of MHz. e LF w A r 10M7 i -B0 u 001 q CD t G y A(Part Number) qProduct ID wOscillation Discriminators for FM CD Discriminators Product ID Radial taping is applied to lead type and embossed taping to chip type. With non-standard products, an alphanumerics indicating "Individual Specification" is added between "uIC" and "iPackaging." eStructure/Size Bulk Radial Taping H0=18mm Embossed Taping ø=180mm Embossed Taping ø=330mm uIC 001 Code IC Applicable IC Control Code iPackaging -B0 -A0 -R0 -R1 Code Packaging Thickness Expander mode Thickness Shear mode A S Code Oscillation Lead Type Chip Type Lp Cp Code Structure/Size p is "A" or subsequent code, which indicates the structure/size. rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M" in case of MHz. tSeries G Two-digit alphanumerics express series Code Series yCenter Frequency/Tolerance A B C D E H V W K Z M F Center Frequency mentioned by specification -30kHz shifted from center frequency of code "A" +30kHz shifted from center frequency of code "A" -60kHz shifted from center frequency of code "A" +60kHz shifted from center frequency of code "A" Center Frequency mentioned by specification -50kHz shifted from center frequency of code "H" +50kHz shifted from center frequency of code "H" Center Frequency mentioned by specification Combination of A, B, C, D, E Combination of A, B, C Nominal Center Frequency Code Center Frequency ±30kHz ±30kHz ±30kHz ±30kHz ±30kHz ±25kHz ±25kHz ±25kHz ±20kHz Tolerance 3dB bandwidth of "F" signifies the frequency difference (both + and -) from reference frequency, which is nominal center frequency.

Small Chip Type SFECF Series SFECF10M7 series for FM receivers are small, high-performance and super thin (1.4mm max.) ﬁ lters. The piezoelectric element is sandwiched by the ceramic substrate. They have 1.4mm max. thickness and a small mounting area (3.45x3.1mm). SFECF series and CDSCB series (MHz Discriminator) enable customers to make VICS/RKE/TPMS set very thin and small. c Features 1. The ﬁ lters are mountable by automatic placers. 2. They are slim, at only 1.4mm max. thickness, and have a small mounting area (3.45x3.1mm) enabling ﬂ exible PCB design. 3. Various bandwidths are available. Select a suitable type in accordance with the desired selectivity. 4. Operating Temperature Range: -20 to +80°C (Standard Type) -40 to +85°C (High-reliability Type) Storage Temperature Range: -40 to +85°C (Standard Type) -55 to +85°C (High-reliability Type) 0.75±0.3 (in mm) 1.3±0.1 3.1±0.2 3.45±0.2 (0.6)(0.6) (0.6) (1.28)(1.28) 0 to 0.4 (6) (1.28)(1.28) 0.65±0.3 0.85±0.30.85±0.3 0 to 0.35 0 to 0.35 0 to 0.4 (5) (4) (1) (2) (3) 0.65±0.3 0.3 min.0.3 min. : EIAJ Monthly Code : Reference( ) (1): Input (2)(5): Ground (3)(4): No connection (6): Output 0.7±0.3 Input electrode marker Standard Type Part Number Center Frequency (fo) (MHz) Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Ripple (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFECF10M7HA00-R0 10.700 [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 [at fn] 1.0 max. 30 min. [within 9MHz to fn] 25 min. [within fn to 12MHz] 330 SFECF10M7GA00-R0 10.700 [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 [at fn] 1.0 max. 30 min. [within 9MHz to fn] 25 min. [within fn to 12MHz] 330 SFECF10M7FA00-R0 10.700 [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 [at fn] 1.0 max. 30 min. [within 9MHz to fn] 25 min. [within fn to 12MHz] 330 SFECF10M7EA00-R0 10.700 [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 SFECF10M7DA0001-R0 10.700 [within 9MHz to fo] 25 min. [within fo to 12MHz] 330 [at fn] 3.0 max. 20 min. [within 9MHz to fn] 20 min. [within fn to 12MHz] 330 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W. Center frequency (fo) deﬁ ned by the center of 3dB bandwidth. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. 1CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

(fo) (MHz) Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Ripple (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFECF10M7HA00S0-R0 10.700 [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 [at fn] 1.0 max. 30 min. [within 9MHz to fn] 25 min. [within fn to 12MHz] 330 SFECF10M7GA00S0-R0 10.700 [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 [at fn] 1.0 max. 30 min. [within 9MHz to fn] 25 min. [within fn to 12MHz] 330 SFECF10M7FA00S0-R0 10.700 [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 [at fn] 1.0 max. 30 min. [within 9MHz to fn] 25 min. [within fn to 12MHz] 330 SFECF10M7EA00S0-R0 10.700 [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 [at fn] 3.0 max. 20 min. [within 9MHz to fn] 20 min. [within fn to 12MHz] 330 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W. Center frequency (fo) deﬁ ned by the center of 3dB bandwidth. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. CODE D B A C E Z M 30kHz Step 10.64MHz±30kHz 10.67MHz±30kHz 10.70MHz±30kHz 10.73MHz±30kHz 10.76MHz±30kHz 25kHz Step 10.650MHz±25kHz 10.675MHz±25kHz 10.700MHz±25kHz 10.725MHz±25kHz 10.750MHz±25kHz Combination A, B, C, D, E Combination A, B, C c Standard Center Frequency Rank Code Input Ground No connection Output (1): (2)(5): (3)(4): (6): (in mm)It indicates solder resist land pattern. 1.051.401.05 0.10.10.10.1 0.1 0.1 0.3 0.3 0.3 (6) (5) (4) (1) (2) (3) c Standard Land Pattern Dimensions (1) (2) (3) (6) (5) (4) R

2 C2 E2

S.S.G. Rg Rg = 50Ω R1 = 280Ω ±5% R2 = 330Ω ±5% C2 = 10 ± 2 pF (Including stray capacitance and Input capacitance of RF voltmeter) E 1: S.S.G. Output Voltage : Input : Ground : No connection : Output (1) (2)(5) (3)(4) (6) c Test Circuit High-Reliability Type !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) c Frequency Characteristics Standard Type SFECF10M7HA00-R0/SFECF10M7HF00-R0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFECF10M7GA00-R0/SFECF10M7GF00-R0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFECF10M7FA00-R0/SFECF10M7FF00-R0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFECF10M7EA00-R0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFECF10M7DA0001-R0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFECF10M7DF00-R0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) c Frequency Characteristics High-reliability Type SFECF10M7HA00S0-R0/SFECF10M7HF00S0-R0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFECF10M7GA00S0-R0/SFECF10M7GF00S0-R0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFECF10M7FA00S0-R0/SFECF10M7FF00S0-R0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFECF10M7EA00S0-R0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFECF10M7DF00S0-R0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Frequency (MHz) Attenuation (dB) SFECF10M7HA00-R0/SFECF10M7HF00-R0 Frequency (MHz) Attenuation (dB) SFECF10M7GA00-R0/SFECF10M7GF00-R0 Frequency (MHz) Attenuation (dB) SFECF10M7FA00-R0/SFECF10M7FF00-R0 Frequency (MHz) Attenuation (dB) SFECF10M7EA00-R0 Frequency (MHz) Attenuation (dB) SFECF10M7DA0001-R0/SFECF10M7DF00-R0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. c Frequency Characteristics (Spurious) Standard Type

Frequency (MHz) Attenuation (dB) SFECF10M7HA00S0-R0/SFECF10M7HF00S0-R0 Frequency (MHz) Attenuation (dB) SFECF10M7GA00S0-R0/SFECF10M7GF00S0-R0 Frequency (MHz) Attenuation (dB) SFECF10M7FA00S0-R0/SFECF10M7FF00S0-R0 Frequency (MHz) Attenuation (dB) SFECF10M7EA00S0-R0 Frequency (MHz) Attenuation (dB) SFECF10M7DF00S0-R0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. c Frequency Characteristics (Spurious) High-reliability Type

Chip Type SFECV/SFECK Series SFECV/SFECK10M7 series for FM receivers are monolithic type ceramic ﬁ lters that utilize the thickness expander mode of piezoelectric ceramics. SFECV series enable customers to make an AM/FM set very thin, and it can be useful to the total chip circuit. c Features 1. The piezoelectric element is sandwiched by heat resistant substrate, thus it has excellent mechanical strength, and it is suitable for automatic mounting. 2. Various bandwidths are available. Select a suitable type in accordance with the desired selectivity. 3. Operating Temperature Range: -20 to +80°C (Standard Type) -40 to +85°C (High-reliability Type) Storage Temperature Range: -40 to +85°C (Standard Type) -55 to +85°C (High-reliability Type) c Applications 1. Small, thin radios 2. Automotive radios 3. Headphone stereos 6.9±0.3 2.9±0.31.5±0.2 4.05±0.4 1.2±0.5 1.0±0.5 1.0±0.5 (3) (2) (1) (1) : Input (2) : Ground (3) : Output ∗∗ : EIAJ Monthly Code ∗∗ : Center Frequency Rank Code : Marking (in mm) 1.0±0.5 Standard Type Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Ripple (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFECV15M0EQ0001-R0 15.000 [within 14MHz to fo] 30 min. [within fo to 16MHz] 330 SFECV10M7KA00-R0 10.700 [within 9MHz to fo] 35 min. [within fo to 12MHz] 330 SFECV10M7JA00-R0 10.700 [within 9MHz to fo] 35 min. [within fo to 12MHz] 330 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) deﬁ ned by the center of 3dB bandwidth. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Ripple (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFECK10M7KA00S0-R0 10.700 [within 9MHz to fo] 35 min. [within fo to 12MHz] 330 SFECK10M7JA00S0-R0 10.700 [within 9MHz to fo] 35 min. [within fo to 12MHz] 330 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) deﬁ ned by the center of 3dB bandwidth. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. High-Reliability Type !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

D B A C E Z M 30kHz Step 10.64MHz±30kHz 10.67MHz±30kHz 10.70MHz±30kHz 10.73MHz±30kHz 10.76MHz±30kHz 25kHz Step 10.650MHz±25kHz 10.675MHz±25kHz 10.700MHz±25kHz 10.725MHz±25kHz 10.750MHz±25kHz Combination A, B, C, D, E Combination A, B, C c Standard Center Frequency Rank Code (in mm)Land 1.2 1.65 2.85 2.85 1.65 1.2 1.2 4.0 c Standard Land Pattern Dimensions (1) (3) (2) R2 C2 E2 RF Voltmeter S.S.G. =-10dBm Rg Rg = 50Ω R 1 = 280Ω ±5% R2 = 330Ω ±5% C2 = 10 ± 2 pF (Including stray capacitance and Input capacitance of RF voltmeter) E 1 : S.S.G. Output Voltage (1) : Input (2) : Ground (3) : Output c Test Circuit 10.0 8.0 6.0 4.0 2.0 0.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) c Frequency Characteristics Standard Type SFECV15M0EQ0001-R0 4.0 3.5 4.5 5.0 5.5 6.0 6.5 7.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFECV10M7KA00-R0 8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.5 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFECV10M7JA00-R0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

4.0 3.5 4.5 5.0 5.5 6.0 6.5 7.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) c Frequency Characteristics High-reliability Type SFECK10M7KA00S0-R0 8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.5 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFECK10M7JA00S0-R0 Frequency (MHz) Attenuation (dB) SFECV15M0EQ0001-R0 8.700 9.700 10.700 Frequency (MHz) Attenuation (dB) 11.700 12.700 SFECV10M7KA00-R0 8.700 9.700 10.700 Frequency (MHz) Attenuation (dB) 11.700 12.700 SFECV10M7JA00-R0 8.700 9.700 10.700 Frequency (MHz) Attenuation (dB) 11.700 12.700 SFECK10M7KA00S0-R0 8.700 9.700 10.700 Frequency (MHz) Attenuation (dB) 11.700 12.700 SFECK10M7JA00S0-R0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. c Frequency Characteristics (Spurious) Standard Type c Frequency Characteristics (Spurious) High-reliability Type

Standard Lead Type SFELF Series SFELF10M7 series for FM-receivers are monolithic type ceramic ﬁ lters that use the thickness expander mode of the piezoelectric ceramic. As part of the environment protection program, the solder for terminal plating and terminal-element connection inside of the ceramic ﬁ lter contain no lead (Pb). c Features 1. These miniature ﬁ lters have high mechanical strength. 2. Low loss, favorable waveform symmetry, and high selectivity 3. Various bandwidths are available for applications in wide to narrow bands. 4. Small dispersion and stable characteristics 5. Change in center frequency is typically within ±30ppm/°C at -20 to +80°C. 6. High reliability (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in mm) (1) : Input (2) : Ground (3) : Output SFELF10M7HA00-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in mm) (1) : Input (2) : Ground (3) : Output SFELF10M7GA00-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in mm) (1) : Input (2) : Ground (3) : Output SFELF10M7FA00-B0 Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFELF10M7HA00-B0 10.700 ±30kHz 180 ±40kHz 520 max. 7.0max. 40 min. [within 9MHz to fo] 40 min. [within fo to 12MHz] 330 SFELF10M7GA00-B0 10.700 ±30kHz 230 ±50kHz 570 max. 4.0±2.0dB 40 min. [within 9MHz to fo] 40 min. [within fo to 12MHz] 330 SFELF10M7FA00-B0 10.700 ±30kHz 280 ±50kHz 650 max. 4.0±2.0dB 30 min. [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) deﬁ ned by the center of 3dB bandwidth. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

D B A C E Z M 30kHz Step 10.64MHz±30kHz 10.67MHz±30kHz 10.70MHz±30kHz 10.73MHz±30kHz 10.76MHz±30kHz 25kHz Step 10.650MHz±25kHz 10.675MHz±25kHz 10.700MHz±25kHz 10.725MHz±25kHz 10.750MHz±25kHz Color Code Black Blue Red Orange White Combination A, B, C, D, E Combination A, B, C c Standard Center Frequency Rank Code (1) (2) (3) C S.S.G RFRg Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) Voltmeter (1) : Input (2) : Ground (3) : Output c Test Circuit 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) c Frequency Characteristics SFELF10M7HA00-B0 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFELF10M7GA00-B0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFELF10M7FA00-B0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Frequency (MHz) Attenuation (dB) c Frequency Characteristics (Spurious) SFELF10M7HA00-B0 Frequency (MHz) Attenuation (dB) SFELF10M7GA00-B0 Frequency (MHz) Attenuation (dB) SFELF10M7FA00-B0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Low Loss Type SFELF Series SFELF10M7 series for FM receivers are monolithic type ceramic ﬁ lters that use the thickness expander mode of the piezoelectric ceramic. As part of the environment protection program, the solder for terminal plating and terminal-element connection inside of the ceramic ﬁ lter contain no lead (Pb). c Features 1. Insertion loss is 1 to 1.5dB lower than conventional products. These types are useful for elevating the sensitivity of sets. 2. Small dispersion and stable characteristics 3. Excellent shape factor of frequency response 4. Good waveform symmetry (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in mm) (1) : Input (2) : Ground (3) : Output SFELF10M7JAA0-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in mm) (1) : Input (2) : Ground (3) : Output SFELF10M7HAA0-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in mm) (1) : Input (2) : Ground (3) : Output SFELF10M7GAA0-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in mm) (1) : Input (2) : Ground (3) : Output SFELF10M7FAA0-B0 Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFELF10M7JAA0-B0 10.700 ±30kHz 150 ±40kHz 360 max. 4.5±2.0dB 35 min. [within 9MHz to fo] 35 min. [within fo to 12MHz] 330 SFELF10M7HAA0-B0 10.700 ±30kHz 180 ±40kHz 470 max. 3.5±1.5dB 35 min. [within 9MHz to fo] 35 min. [within fo to 12MHz] 330 SFELF10M7GAA0-B0 10.700 ±30kHz 230 ±50kHz 520 max. 3.0±2.0dB 35 min. [within 9MHz to fo] 35 min. [within fo to 12MHz] 330 SFELF10M7FAA0-B0 10.700 ±30kHz 280 ±50kHz 590 max. 2.5±2.0dB 30 min. [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) deﬁ ned by the center of 3dB bandwidth. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

D B A C E Z M 30kHz Step 10.64MHz±30kHz 10.67MHz±30kHz 10.70MHz±30kHz 10.73MHz±30kHz 10.76MHz±30kHz 25kHz Step 10.650MHz±25kHz 10.675MHz±25kHz 10.700MHz±25kHz 10.725MHz±25kHz 10.750MHz±25kHz Color Code Black Blue Red Orange White Combination A, B, C, D, E Combination A, B, C c Standard Center Frequency Rank Code (1) (2) (3) C S.S.G RFRg Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) Voltmeter (1) : Input (2) : Ground (3) : Output c Test Circuit 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) c Frequency Characteristics SFELF10M7JAA0-B0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFELF10M7HAA0-B0 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFELF10M7GAA0-B0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFELF10M7FAA0-B0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Frequency (MHz) Attenuation (dB) c Frequency Characteristics (Spurious) SFELF10M7JAA0-B0 Frequency (MHz) Attenuation (dB) SFELF10M7HAA0-B0 Frequency (MHz) Attenuation (dB) SFELF10M7GAA0-B0 Frequency (MHz) Attenuation (dB) SFELF10M7FAA0-B0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Low Spurious Response Type SFELF Series SFELF10M7 series for FM-receivers are monolithic type ceramic ﬁ lters that use the thickness expander mode of the piezoelectric ceramic. As part of the environment protection program, the solder for terminal plating and terminal-element connection inside of the ceramic ﬁ lter contain no lead (Pb). c Features These types have lower spurious response compared to standard ﬁ lters. (1)(2)(3) 7.5±2.0 5.0±1.03.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 MARKING EIAJ CODE (in mm) SFELF10M7KAB0-B0 (1)(2)(3) 7.5±2.0 5.0±1.03.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 MARKING EIAJ CODE (in mm) SFELF10M7JAB0-B0 (1)(2)(3) 7.5±2.0 5.0±1.03.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 MARKING EIAJ CODE (in mm) SFELF10M7HAB0-B0 (1)(2)(3) 7.5±2.0 5.0±1.03.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 MARKING EIAJ CODE (in mm) SFELF10M7GAB0-B0 (1)(2)(3) 7.5±2.0 5.0±1.03.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 MARKING EIAJ CODE (in mm) SFELF10M7FAB0-B0 Continued on the following page. !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFELF10M7KAB0-B0 10.700 ±30kHz 110 ±30kHz 350 max. 7.0±2.0dB 45/30 min. [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 SFELF10M7JAB0-B0 10.700 ±30kHz 150 ±40kHz 380 max. 5.5±2.0dB 45 min. [within 9MHz to fo] 45 min. [within fo to 12MHz] 330 SFELF10M7HAB0-B0 10.700 ±30kHz 180 ±40kHz 520 max. 5.0±2.0dB 45 min. [within 9MHz to fo] 45 min. [within fo to 12MHz] 330 SFELF10M7GAB0-B0 10.700 ±30kHz 230 ±50kHz 570 max. 3.0±2.0dB 45 min. [within 9MHz to fo] 45 min. [within fo to 12MHz] 330 CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

Continued from the preceding page. Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) deﬁ ned by the center of 3dB bandwidth. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. CODE D B A C E Z M 30kHz Step 10.64MHz±30kHz 10.67MHz±30kHz 10.70MHz±30kHz 10.73MHz±30kHz 10.76MHz±30kHz 25kHz Step 10.650MHz±25kHz 10.675MHz±25kHz 10.700MHz±25kHz 10.725MHz±25kHz 10.750MHz±25kHz Color Code Black Blue Red Orange White Combination A, B, C, D, E Combination A, B, C c Standard Center Frequency Rank Code (1) (2) (3) C S.S.G RFRg Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) Voltmeter (1) : Input (2) : Ground (3) : Output c Test Circuit 8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.5 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) c Frequency Characteristics SFELF10M7KAB0-B0 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFELF10M7JAB0-B0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFELF10M7HAB0-B0 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFELF10M7GAB0-B0 Continued on the following page. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFELF10M7FAB0-B0 10.700 ±30kHz 280 ±50kHz 650 max. 3.0±2.0dB 45 min. [within 9MHz to fo] 45 min. [within fo to 12MHz] 330

Continued from the preceding page. 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) c Frequency Characteristics SFELF10M7FAB0-B0 Frequency (MHz) Attenuation (dB) c Frequency Characteristics (Spurious) SFELF10M7KAB0-B0 Frequency (MHz) Attenuation (dB) SFELF10M7JAB0-B0 Frequency (MHz) Attenuation (dB) SFELF10M7HAB0-B0 Frequency (MHz) Attenuation (dB) SFELF10M7GAB0-B0 Frequency (MHz) Attenuation (dB) SFELF10M7FAB0-B0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Wide Bandwidth Type SFELF Series SFELF10M7 series for FM-receivers are monolithic type ceramic ﬁ lters that use the thickness expander mode of the piezoelectric ceramic. As part of the environment protection program, the solder for terminal plating and terminal-element connection inside of the ceramic ﬁ lter contain no lead (Pb). c Features Realizes wider band characteristics not obtained by conventional ceramic ﬁ lters. (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in mm) (1) : Input (2) : Ground (3) : Output SFELF10M7EA00-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in mm) (1) : Input (2) : Ground (3) : Output SFELF10M7DF00-B0 Part Number Center Frequency (fo) (MHz) Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFELF10M7EA00-B0 10.700 ±30kHz - 330 ±50kHz 680 max. 4.0±2.0dB 30 min. [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 [within 5MHz to fn] 20 min. [within fn to 15MHz] 470 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) deﬁ ned by the center of 3dB bandwidth. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. CODE D B A C E Z M 30kHz Step 10.64MHz±30kHz 10.67MHz±30kHz 10.70MHz±30kHz 10.73MHz±30kHz 10.76MHz±30kHz 25kHz Step 10.650MHz±25kHz 10.675MHz±25kHz 10.700MHz±25kHz 10.725MHz±25kHz 10.750MHz±25kHz Color Code Black Blue Red Orange White Combination A, B, C, D, E Combination A, B, C c Standard Center Frequency Rank Code (SFELF10M7EA00-B0) !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

(1) (2) (3) C S.S.G RFRg Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) Voltmeter (1) : Input (2) : Ground (3) : Output c Test Circuit 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) c Frequency Characteristics SFELF10M7EA00-B0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFELF10M7DF00-B0 Frequency (MHz) Attenuation (dB) c Frequency Characteristics (Spurious) SFELF10M7EA00-B0 Frequency (MHz) Attenuation (dB) SFELF10M7DF00-B0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Narrow Bandwidth Type SFELF Series c Features SFELF10M7LFTA/KAH0 series realizes narrower band characteristics not obtained by conventional ceramic ﬁ lters. Besides, low spurious and temperature characteristics are stable. This series is suitable for European car-audio or AM upconversion use that needs stable narrow band characteristics. As part of the environment protection program, the solder for terminal plating and terminal-element connection inside of the ceramic ﬁ lter contain no lead (Pb). (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in mm) (1) : Input (2) : Ground (3) : Output SFELF10M7LFTA-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in mm) (1) : Input (2) : Ground (3) : Output SFELF10M7KAH0-B0 Part Number Center Frequency (fo) (MHz) Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) [within 9MHz to fn] 30 min. [within fn to 12MHz] 330 SFELF10M7KAH0-B0 10.700 ±30kHz - 110 ±30kHz 350 max. 7.0±2.0dB 30 min. [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) deﬁ ned by the center of 3dB bandwidth. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. CODE D B A C E Z M 30kHz Step 10.64MHz±30kHz 10.67MHz±30kHz 10.70MHz±30kHz 10.73MHz±30kHz 10.76MHz±30kHz 25kHz Step 10.650MHz±25kHz 10.675MHz±25kHz 10.700MHz±25kHz 10.725MHz±25kHz 10.750MHz±25kHz Color Code Black Blue Red Orange White Combination A, B, C, D, E Combination A, B, C c Standard Center Frequency Rank Code (SFELF10M7KAH0-B0) !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

(1) (2) (3) C S.S.G RFRg Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) Voltmeter (1) : Input (2) : Ground (3) : Output c Test Circuit 12.0 11.0 10.0 9.0 8.0 7.0 6.0 5.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) c Frequency Characteristics SFELF10M7LFTA-B0 8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.5 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFELF10M7KAH0-B0 Frequency (MHz) Attenuation (dB) c Frequency Characteristics (Spurious) SFELF10M7LFTA-B0 Frequency (MHz) Attenuation (dB) SFELF10M7KAH0-B0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For FM-IF Tuners SFELF Series SFELF10M7 series for FM-receivers are monolithic type ceramic ﬁ lters that use the thickness expander mode of the piezoelectric ceramic. As part of the environment protection program, the solder for terminal plating and terminal-element connection inside of the ceramic ﬁ lter contain no lead (Pb). c Features 1. Little dispersion of amplitude characteristics and phase characteristics (G. D. T. characteristics) 2. The SFELF_G series is based on SFELF_FA00/GA00/ HA00, and it obtains high selectivity with low loss. There is little dispersion of amplitude and GDT characteristics, and low distortion rate can be obtained. 3. The ﬂ atness of GDT is inspected for all products. (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in mm) (1) : Input (2) : Ground (3) : Output SFELF10M7HA0G-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in mm) (1) : Input (2) : Ground (3) : Output SFELF10M7GA0G-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.10.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in mm) (1) : Input (2) : Ground (3) : Output SFELF10M7FA0G-B0 Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) GDT Bandwidth (kHz) Input/Output Impedance (ohm) SFELF10M7HA0G-B0 10.700 ±30kHz 180 ±40kHz 520 max. 7.0max. 40 min. [within 9MHz to fo] 40 min. [within fo to 12MHz] fo±45min. 330 SFELF10M7GA0G-B0 10.700 ±30kHz 230 ±50kHz 600 max. 7.0max. 40 min. [within 9MHz to fo] 40 min. [within fo to 12MHz] fo±60min. 330 SFELF10M7FA0G-B0 10.700 ±30kHz 280 ±50kHz 650 max. 4.0±2.0dB 30 min. [within 9MHz to fo] 30 min. [within fo to 12MHz] fo±85min. 330 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Center frequency (fo) deﬁ ned by the center of 3dB bandwidth. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. CERAFILr (CERAFILr 10.7MHz) for Audio/Visual Equipment

D B A C E Z M 30kHz Step 10.64MHz±30kHz 10.67MHz±30kHz 10.70MHz±30kHz 10.73MHz±30kHz 10.76MHz±30kHz 25kHz Step 10.650MHz±25kHz 10.675MHz±25kHz 10.700MHz±25kHz 10.725MHz±25kHz 10.750MHz±25kHz Color Code Black Blue Red Orange White Combination A, B, C, D, E Combination A, B, C c Standard Center Frequency Rank Code (1) (2) (3) C S.S.G RFRg Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) Voltmeter (1) : Input (2) : Ground (3) : Output c Test Circuit 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) c Frequency Characteristics SFELF10M7HA0G-B0 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFELF10M7GA0G-B0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) SFELF10M7FA0G-B0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Frequency (MHz) Attenuation (dB) c Frequency Characteristics (Spurious) SFELF10M7HA0G-B0 Frequency (MHz) Attenuation (dB) SFELF10M7GA0G-B0 Frequency (MHz) Attenuation (dB) SFELF10M7FA0G-B0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

CERAFILr 10.7MHz Related Data on Lead Type –20–40 –20 +20 +40 0 +20 Temperature (°C) +40 +60 +80 Center frequency –20–2 0 +20 Temperature (°C) +40 +60 +80 Insertion loss –20–40 –20 +20 +40 0 +20 Temperature (°C) +40 +60 +80 3dB Bandwidth Variation (kHz)Variation (dB)Variation (kHz) c Temperature Characteristics SFELF10M7GA00-B0 –20–40 –20 +20 +40 0 +20 +40 +60 +80 –20–2 0 +20 +40 +60 +80 –20–40 –20 +20 +40 0 +20 +40 +60 +80 Temperature (°C) Center frequency Temperature (°C) Insertion loss Temperature (°C) 3dB Bandwidth Variation (kHz)Variation (dB)Variation (kHz) SFELF10M7HA00-B0 c Matching Conditions 01 . 2 1.0 0.8 0.6 0.4 0.2 01 . 2 1.0 0.8 0.6 0.4 0.2 01 . 2 1.0 0.8 0.6 0.4 0.2 01 . 2 1.0 0.8 0.6 0.4 0.2 R2=220Ω R2=330Ω R2=560Ω R2=1kΩ Attenuation (dB)Attenuation (dB) Attenuation (dB)Attenuation (dB) Frequency (MHz) Frequency (MHz) Frequency (MHz) Frequency (MHz) Group Delay Time (μsec.)Group Delay Time (μsec.) Group Delay Time (μsec.)Group Delay Time (μsec.) SFELF10M7GA00-B0 01 . 2 1.0 0.8 0.6 0.4 0.2 01 . 2 1.0 0.8 0.6 0.4 0.2 01 . 2 1.0 0.8 0.6 0.4 0.2 01 . 2 1.0 0.8 0.6 0.4 0.2 C=10pF C=33pF C=56pF C=82pF Attenuation (dB)Attenuation (dB) Attenuation (dB)Attenuation (dB) Frequency (MHz) Frequency (MHz) Frequency (MHz) Frequency (MHz) Group Delay Time (μsec.)Group Delay Time (μsec.) Group Delay Time (μsec.)Group Delay Time (μsec.) SFELF10M7HA00-B0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. c Loaded Resistance and Waveform (Rg+R1=330 ohm) c Loaded Capacitance and Waveform (Rg+R1=R2=330 ohm) 1. When using ceramic ﬁ lters, it is most important to match the input/output load to impedance 330 ohm (SFELF10M7DF00-B0 is 470 ohm). Waveform symmetry is damaged when reactance is added to the input/output load. 2. Two ceramic ﬁ lters directly connected can be used for high selectivity. For reducing waveform variation, it is recommended to input a buffer AMP between ceramic ﬁ lters. 3. The SFELF10M7 series are of input/output symmetric structure so that in theory there is no input/output directionality. Actual circuits may use different input/output loading conditions (for example, mismatched impedance) or capacitance load. In such cases, the waveform will be a little changed by the direction of the input/output of the ceramic ﬁ lters.

4.5-6.5MHz Chip Type SFSKA Series SMD ceramic ﬁ lter SFSKA_CF is a small and thin SMD ﬁ lter sealed with a metal cap. Recommended for LCD-TVs, and small and thin tuners. c Features 1. High attenuation outside bandwidth 2. Small and thin package 3. Reﬂ ow-solderable (1) : Input (2) : Ground (3) : Output 7.9±0.2 3.0±0.1 8.5±0.2 3.8±0.2 1.8±0.2 0.5±0.1 0.6±0.2 1.0±0.1 1.3±0.2 2.5±0.2 2.5±0.2 0.3±0.1 1.3±0.2 Part Number Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) 20dB Bandwidth (kHz) Insertion Loss (dB) Spurious Attenuation(1) (dB) Spurious Attenuation(2) (dB) Input/Output Impedance (ohm) [within 0 to fn] 15 min. [within fn to 7.0MHz] 1000 [within 0 to fn] 15 min. [within fn to 7.0MHz] 600 [within 0 to fn] 15 min. [within fn to 7.5MHz] 470 [within 0 to fn] 15 min. [within fn to 8.5MHz] 470 Area of Insertion Loss: at minimum loss point For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 1.0 1.0 1.5 1.5 4.8 1.0 (in mm) c Standard Land Pattern Dimensions E2C2R2 RF Voltmeter Rg S.S.G. (1) (2) (3) R1+Rg=R2=1000Ω ±5%, Rg=50Ω C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1:S.S.G. Output voltage (1) : (2) : (3) : Input Ground Output c Test Circuit SFSKA4M50CF00-R3 Continued on the following page. !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. CERAFILr (CERAFILr 2.3-6.5MHz) for Audio/Visual Equipment

Continued from the preceding page. E2C2R2 RF Voltmeter Rg S.S.G. (1) (2) (3) R1+Rg=R2=600Ω ±5%, Rg=50Ω C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1: S.S.G. Output voltage (1) : (2) : (3) : Input Ground Output c Test Circuit SFSKA5M50CF00-R3 E2C2R2 RF Voltmeter Rg S.S.G. (1) (2) (3) R1+Rg=R2=470Ω ±5%, Rg=50Ω C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1: S.S.G. Output voltage (1) : (2) : (3) : Input Ground Output SFSKA6M00CF00-R3 E2C2R2 RF Voltmeter Rg S.S.G. (1) (2) (3) R1+Rg=R2=470Ω ±5%, Rg=50Ω C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1: S.S.G. Output voltage (1) : (2) : (3) : Input Ground Output SFSKA6M50CF00-R3 Attenuation (dB) 4.7 Frequency (MHz) 5.1 5.5 c Frequency Characteristics SFSKA4M50CF00-R3 Attenuation (dB) Frequency (MHz) SFSKA5M50CF00-R3 Attenuation (dB) Frequency (MHz) SFSKA6M00CF00-R3 Attenuation (dB) Frequency (MHz) SFSKA6M50CF00-R3 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

0.0 2.0 4.0 Attenuation (dB) 6.0 Frequency (MHz) 8.0 10.0 c Frequency Characteristics (Spurious) SFSKA4M50CF00-R3 Attenuation (dB) Frequency (MHz) SFSKA5M50CF00-R3 Attenuation (dB) Frequency (MHz) SFSKA6M00CF00-R3 Attenuation (dB) Frequency (MHz) SFSKA6M50CF00-R3 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

2.3-5.7MHz Chip Type SFSKB Series The SFSKB series are SMD ceramic ﬁ lters suitable for IR headphone applications. 5.7MHz are available. Realized small, thin and lightweight package, compared with conventional LC ﬁ lters. It helps to compose multi-channel circuit on one PCB. No frequency adjustment is required on PCB and it contributes to the reduction of production cost. c Features 1. SMD package in plastic emboss tape, available for automatic placing. 2. They are slim, at only 1.5mm max. thickness, and have a small mounting area (5.2x3.8mm) enabling ﬂ exible PCB design. 3. Available for lead (Pb) free reﬂ ow soldering process. 4. Operating temperature range: 0 to +70°C Storage temperature range: -55 to +85°C 5. No frequency adjustment is required in production process. 6. Small, thin and lightweight package compared with conventional LC ﬁ lters c Applications 1. IR headphone 2. Set Top Box for satellite broadcasting (in mm) 5.2±0.1 (0.1) 1.5±0.1 0.3±0.1 (2.0) 4-0.35 (4.93) 0.25±0.1 4-0.35 (3.5) (1) : Input (2) : Output (3) : Ground (4) : Terminal for external capacitor ∗ : EIAJ Monthly Code Tolerance unless otherwise specified : ±0.1mm ( ) : Reference (1) (1) (2) (4) (3) (2) (4) (3) Part Number Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) 20dB Bandwidth (kHz) Insertion Loss (dB) Spurious Attenuation(1) (dB) Spurious Attenuation(2) (dB) Input/Output Impedance (ohm) [within 1.3 to 1.8MHz] 23 min. [within 2.8 to 3.3MHz] 1000 [within 1.8 to 2.3MHz] 25 min. [within 3.3 to 3.8MHz] 1000 [within 2.2 to 2.8MHz] 30 min. [within 3.8 to 4.2MHz] 1000 [within 2.8 to 3.2MHz] 30 min. [within 4.3 to 4.8MHz] 1000 [within 3.3 to 3.8MHz] 30 min. [within 4.8 to 5.3MHz] 1000 [within 3.8 to 4.3MHz] 30 min. [within 5.2 to 5.8MHz] 1000 [within 4.2 to 4.8MHz] 30 min. [within 5.7 to 6.2MHz] 1000 [within 4.7 to 5.2MHz] 30 min. [within 6.2 to 6.7MHz] 1000 For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. CERAFILr (CERAFILr 2.3-6.5MHz) for Audio/Visual Equipment

(in mm) 1.8 2.0 1.8 1.3 1.6 1.3 c Standard Land Pattern Dimensions Rg S.S.G. Cc RF Voltmeter (1) (3) (4) (2) R1+Rg=R2=1.0kΩ Cc=22pF±5% C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1 : S.S.G. Output Voltage (1) : Input (2) : Output (3) : Ground (4) : Terminal for external capacitor c Test Circuit SFSKB2M30GF00-R1/SFSKB3MZ0GF00-R1 Rg S.S.G. Cc RF Voltmeter (1) (3) (4)(2) R1+Rg=R2=1.0kΩ Cc=39pF±5% C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1 : S.S.G. Output Voltage (1) : Input (2) : Output (3) : Ground (4) : Terminal for external capacitor SFSKB2M80GF00-R1/SFSKB3M20FF00-R1 Rg S.S.G. Cc RF Voltmeter (1) (3) (4)(2) R1+Rg=R2=1.0kΩ Cc=33pF±5% C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1 : S.S.G. Output Voltage (1) : Input (2) : Output (3) : Ground (4) : Terminal for external capacitor SFSKB4M30GF00-R1/SFSKB5M70GF00-R1 Rg S.S.G. Cc RF Voltmeter (1) (3) (4)(2) R1+Rg=R2=1.0kΩ Cc=15pF±5% C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1 : S.S.G. Output Voltage (1) : Input (2) : Output (3) : Ground (4) : Terminal for external capacitor SFSKB4M80GF00-R1 Rg S.S.G. Cc RF Voltmeter (1) (3) (4)(2) R1+Rg=R2=1.0kΩ Cc=27pF±5% C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1 : S.S.G. Output Voltage (1) : Input (2) : Output (3) : Ground (4) : Terminal for external capacitor SFSKB5M20GF00-R1 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Attenuation (dB) Frequency (MHz) c Frequency Characteristics SFSKB2M30GF00-R1 Attenuation (dB) Frequency (MHz) SFSKB2M80GF00-R1 Attenuation (dB) Frequency (MHz) SFSKB3M20FF00-R1 Attenuation (dB) Frequency (MHz) SFSKB3M80GF00-R1 Attenuation (dB) Frequency (MHz) SFSKB4M30GF00-R1 Attenuation (dB) Frequency (MHz) SFSKB4M80GF00-R1 Attenuation (dB) Frequency (MHz) SFSKB5M20GF00-R1 Attenuation (dB) Frequency (MHz) SFSKB5M70GF00-R1 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

0.300 1.300 2.300 Attenuation (dB) 3.300 Frequency (MHz) 4.300 c Frequency Characteristics (Spurious) SFSKB2M30GF00-R1 0.800 1.800 2.800 Attenuation (dB) 3.800 Frequency (MHz) 4.800 SFSKB2M80GF00-R1 1.200 2.200 3.200 Attenuation (dB) 4.200 Frequency (MHz) 5.200 SFSKB3M20FF00-R1 1.800 2.800 3.800 Attenuation (dB) 4.800 Frequency (MHz) 5.800 SFSKB3M80GF00-R1 2.300 3.300 4.300 Attenuation (dB) 5.300 Frequency (MHz) 6.300 SFSKB4M30GF00-R1 2.800 3.800 4.800 Attenuation (dB) 5.800 Frequency (MHz) 6.800 SFSKB4M80GF00-R1 3.200 4.200 5.200 Attenuation (dB) 6.200 Frequency (MHz) 7.200 SFSKB5M20GF00-R1 3.700 4.700 5.700 Attenuation (dB) 6.700 Frequency (MHz) 7.700 SFSKB5M70GF00-R1 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

SFPKA series for AM use is one of the most recommendable intermediate ﬁ lters, having such distinctive features as high selectivity, high stability and adjustment-free operation. Additionally, its easy matching with IC helps create an easy circuit design. c Features 1. The ﬁ lters are mountable by automatic placers and can be reﬂ ow soldered and withstand washing. 2. The ﬁ lters are wide bandwidth and high selectivity, so they are suitable for car radio and multi-band radio. 7.5±0.3 5.0 max. 3.0±0.3 8.4 max. 2.0±0.3 1.5±0.3 7.0±0.3 0.9±0.1 MARKING EIAJ CODE 2.0±0.3 (1) (2) (3) 1.5±0.3 1.6±0.3 Connection (1): Input (2): Ground (3): Output (in mm) Part Number Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Selectivity (-) (dB) Selectivity (+) (dB) Insertion Loss (dB) Input/Output Impedance (ohm) Element Area of Insertion Loss: at minimum loss point Center frequency (fo) is deﬁ ned by the center of 6dB bandwidth. (fn) means nominal center frequency (450kHz). For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. (in mm) 2.02.475 6.95 1.61.55 7.45 1.1 c Standard Land Pattern Dimensions (1) (2) S(3) (4)S (6) Type Item Winding Specification No load Qu Tuning Capacitance 180pF SFPKA 60T 125T 28T (Bottom view) s-ATCHINGOF#%2!&),r3&0+!SERIESWITH)&4ISDECIDEDBYTHE1UOF)&4 AND)&4SECONDARYSIDEIMPEDANCE \\:\\3ETTHE1UATABOUTBECAUSE A1UVALUEWHICHISTOOHIGHEG MAYPRODUCERIPPLEINTHEWAVEFORM )TISRECOMMENDEDTOMATCHTHEIMPEDANCEOF\\:\\WITHTHATOFTHE #%2!&),r c Recommended IFT Rg+R1=R2=Input/Output Impedance E1: S.S.G. Output Voltage Rg S.S.G. 0dBm (1) (2) (3) R2 E2 RF Voltmeter (1): Input (2): Ground (3): Output c Test Circuit !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. CERAFILr (CERAFILr 455kHz) for Audio/Visual Equipment

Attenuation (dB) 200 400 G.D.T. (μsec.) 425 450 475 Frequency (kHz) 360 280 320 240 160 120 c Frequency Characteristics SFPKA450KH1A-R1 100 Attenuation (dB) 200 400 G.D.T. (μsec.) 425 450 475 Frequency (kHz) 360 320 280 240 160 120 SFPKA450KG1A-R1 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Lead Type SFPLA/CFWLA Series SFPLA/CFWLA series for AM use is one of the most suitable intermediate ﬁ lters, having such distinctive features as high selectivity, high stability, high attenuation, and adjustment-free operation. Additionally, its easy matching with IC helps create an easy circuit design. This is the most suitable for car stereo and all band radio with high attenuation. 0.6±0.11.2±0.5 8.0±0.3 MARKING EIAJ CODE 3.3±0.5 2.7±0.3 (1) (2) (3) 0.3±0.1 1.5 max.0.15±0.05 Connection (1) : Input (2) : Ground (3) : Output (in mm) SFPLA Series 4.3±0.3 0.15 1.5 max. 2.3±0.5 2.0±0.3 2.9±0.3 11.0±0.5 MARKING EIAJ CODE 1.2±0.5 (1) (2)(4) (3) (5) 1.35±0.5 7.0±0.53.5±0.5 0.6±0.1 0.8±0.1 7.5±0.5 2.6±0.3 Connection (1): Input (2)(3)(4): Ground (5): Output (in mm) 2.9—0.3 2.9±0.3 CFWLA Series Part Number Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Selectivity (-) (dB) Selectivity (+) (dB) Insertion Loss (dB) Input/Output Impedance (ohm) Element Area of Insertion Loss: at minimum loss point Center frequency (fo) is deﬁ ned by the center of 6dB bandwidth. (fn) means nominal center frequency (450kHz). For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. (1) (2) S(3) (4)S (6) Type Item Winding Specification No load Qu Tuning Capacitance 180pF SFPLA/CFWLA 7x7mm IFT 60T 125T 28T (Bottom view) s-ATCHINGOF#%2!&),r3&0,!#&7,!SERIESWITH)&4ISDECIDEDBYTHE 1UOF)&4AND)&4SECONDARYSIDEIMPEDANCE \\:\\3ETTHE1UATABOUT BECAUSEA1UVALUEWHICHISTOOHIGHEG MAYPRODUCERIPPLEINTHE WAVEFORM)TISRECOMMENDEDTOMATCHTHEIMPEDANCEOF\\:\\WITHTHATOF THE#%2!&),r c Recommended IFT Input OutputR1 Rg SSG Ground RF Voltmeter Rg+R1 =R2 : Input/Output Impedance c Test Circuit !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. CERAFILr (CERAFILr 455kHz) for Audio/Visual Equipment

Attenuation (dB) 430 440 450 460 470 Frequency (kHz) c Frequency Characteristics IFT+SFPLA450KH1A-B0 430 440 450 460 470 Frequency (kHz) Attenuation (dB) IFT+CFWLA450KHFA-B0 0123456789 1 0 Frequency (MHz) Attenuation (dB) c Frequency Characteristics (Spurious) IFT+SFPLA450KH1A-B0 0123456789 1 0 Frequency (MHz) Attenuation (dB) IFT+CFWLA450KHFA-B0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series SFPLA/CFULA/CFWLA series for AM use is one of the most suitable intermediate ﬁ lters, having such distinctive features as high selectivity, high stability, high attenuation, and adjustment-free operation. Additionally, its easy matching with IC helps create an easy circuit design. Especially, CFULA/CFWLA_Y series improves the frequency ﬁ delity in the high sound area of an AM stereo with its wide band and ﬂ at characteristics of group delay time. 0.6±0.11.2±0.5 8.0±0.3 MARKING EIAJ CODE 3.3±0.5 2.7±0.3 (1) (2) (3) 0.3±0.1 1.5 max.0.15±0.05 Connection (1) : Input (2) : Ground (3) : Output (in mm) SFPLA Series 4.3±0.3 0.15 1.5 max. 2.3±0.5 2.0±0.3 2.9±0.3 11.0±0.5 MARKING EIAJ CODE 1.2±0.5 (1) (2)(4) (3) (5) 1.35±0.5 7.0±0.53.5±0.5 0.6±0.1 0.8±0.1 7.5±0.5 2.6±0.3 Connection (1): Input (2)(3)(4): Ground (5): Output (in mm) 2.9—0.3 2.9±0.3 CFWLA Series 0.6±0.11.2±0.5 8.0±0.3 MARKING EIAJ CODE 3.3±0.5 2.7±0.3 (1) (2) (3) 0.3±0.1 1.5 max. 0.15±0.05 Connection (1): Input (2): Ground (3): Output (in mm) CFULA Series Part Number Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Selectivity (-) (dB) Selectivity (+) (dB) Insertion Loss (dB) GDT 20µsec. Bandwidth (kHz) Input/Output Impedance (ohm) Element Area of Insertion Loss: at minimum loss point Center frequency (fo) is deﬁ ned by the center of 6dB bandwidth. (fn) means nominal center frequency (450kHz). For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. CERAFILr (CERAFILr 455kHz) for Audio/Visual Equipment

(1) (2) S(3) (4)S (6) Type Item Winding Specification No load Qu Tuning Capacitance 180pF SFPLA/CFULA/CFWLA 7x7mm IFT 60T 125T 28T (Bottom view) BYTHE1UOF)&4AND)&4SECONDARYSIDEIMPEDANCE \\:\\3ETTHE1UAT ABOUTBECAUSEA1UVALUEWHICHISTOOHIGHEG MAYPRODUCE RIPPLEINTHEWAVEFORM)TISRECOMMENDEDTOMATCHTHEIMPEDANCEOF\\:\\ WITHTHATOFTHE#%2!&),r c Recommended IFT Input OutputR1 Rg SSG Ground RF Voltmeter Rg+R1 =R2 : Input/Output Impedance c Test Circuit Attenuation (dB) 430 440 450 460 470 Frequency (kHz) c Frequency Characteristics IFT+SFPLA450KF1A-B0 430 440 450 460 470 Frequency (kHz) Attenuation (dB) IFT+CFWLA450KFFA-B0 430 440 450 460 470 200 100 Group Delay Time (μsec.) Frequency (kHz) Attenuation (dB) IFT+CFULA450KF1Y-B0 430 440 450 460 470 200 100 Group Delay Time (μsec.) Frequency (kHz) Attenuation (dB) IFT+CFWLA450KF1Y-B0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

CERAFILr 455kHz SFp Series Temperature Characteristics -20 0 20 40 60 80 -20 0 20 40 60 80 -20 0 20 40 60 80 Center Frequency (kHz) 3dB Bandwidth (kHz) Insertion Loss (dB) Temperature (°C) Temperature (°C) Temperature (°C) c SFPLA450KH1A-B0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

4.5-6.5MHz Chip Type TPSKA Series SMD ceramic trap TPSKA_B is a small and thin SMD trap sealed with a metal cap recommended for LCD-TVs, and small and thin tuners. c Features 1. High attenuation and high performance group delay time 2. Small and thin package 3. Reﬂ ow-solderable (1) : Input (2) : Ground (3) : Output 7.9±0.2 3.0±0.1 8.5±0.2 3.8±0.2 1.8±0.2 0.5±0.1 0.6±0.2 1.0±0.1 1.3±0.2 2.5±0.2 2.5±0.2 0.3±0.1 1.3±0.2 (1) (2) (3) (in mm) Part Number Nominal Center Frequency (fn1) (MHz) Attenuation (at fn1) (dB) 30dB Attenuation BW (fn1) (kHz) TPSKA4M50B00-R3 4.500 35 min. 50 min. TPSKA5M50B00-R3 5.500 35 min. 70 min. TPSKA6M00B00-R3 6.000 35 min. 70 min. TPSKA6M50B00-R3 6.500 35 min. 70 min. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. 1.0 1.0 1.5 1.5 4.8 1.0 (in mm) c Standard Land Pattern Dimensions RF Voltmeter Rg L S.S.G. Rg=50Ω R1=330Ω R2=1.0kΩ L=15μH 50Ω R2 c Test Circuit Attenuation (dB) Frequency (MHz) c Frequency Characteristics TPSKA4M50B00-R3 Attenuation (dB) Frequency (MHz) TPSKA5M50B00-R3 Continued on the following page. !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. CERAFILr (Ceramic Trap) for Audio/Visual Equipment

Continued from the preceding page.Attenuation (dB) Frequency (MHz) c Frequency Characteristics TPSKA6M00B00-R3 Attenuation (dB) Frequency (MHz) TPSKA6M50B00-R3 Attenuation (dB) Frequency (MHz) G.D.T. (nsec) 700 600 500 400 300 200 100 c Frequency Characteristics (Spurious) TPSKA4M50B00-R3 Attenuation (dB) Frequency (MHz) G.D.T. (nsec.) 1000 800 600 400 200 TPSKA5M50B00-R3 Attenuation (dB) Frequency (MHz) G.D.T. (nsec.) 1000 800 600 400 200 TPSKA6M00B00-R3 Attenuation (dB) Frequency (MHz) G.D.T. (nsec.) 1000 800 600 400 200 TPSKA6M50B00-R3 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

10.7MHz Ultra Thin Chip Type CDSCB Series CDSCB10M7 series forms a resonator on a piezoelectric ceramic substrate. In combination with ICs, this type obtains stable demodulation characteristics in a wide bandwidth. They have 1.0mm max. thickness and small mounting area (4.5x2.0mm). c Features 1. Compact and high reliability and recommended for automotive applications. 2. Can be combined with various ICs. The IC is determined by the last number in the part number. 3. Stable demodulation characteristics can be obtained without adjustment. 4. Stable temperature characteristics. 5. Available lead (Pb) free solder reﬂ ow. 4.1 max. 1.0 max. 4.5±0.1 0.2±0.2 2.0±0.1 0.3±0.2 0.4(ref.) 0.4(ref.) 1.4 max. 0.4±0.05 1.5±0.1 0.8±0.10.8±0.1 1.5±0.1 (in mm) Part Number Center Frequency (fo) (MHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output (mV) Distortion (%) S Curve (mV) IC CDSCB10M7GA135-R0 10.700 ±30kHz 155 min. 75 min. - - TH71101 CDSCB10M7GA136-R0 10.700 ±30kHz 140 min. 120 min. - - TH7122 CDSCB10M7GF123-R0 10.700 (fn) - - - 900 min. TA31275FN CDSCB10M7GF123S-R0 10.700 (fn) - - - 900 min. TA31275FN CDSCB10M7GF126-R0 10.700 (fn) - - - 400 min. NJM2295AV (fn) means nominal center frequency (10.700MHz). For safety purposes, avoid applying a direct current between the terminals. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. CODE D B A C E Z M 30kHz Step 10.64MHz±30kHz 10.67MHz±30kHz 10.70MHz±30kHz 10.73MHz±30kHz 10.76MHz±30kHz 25kHz Step 10.650MHz±25kHz 10.675MHz±25kHz 10.700MHz±25kHz 10.725MHz±25kHz 10.750MHz±25kHz Combination A, B, C, D, E Combination A, B, C c Standard Center Frequency Rank Code !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering. CERAFILr (Ceramic Discriminator) for Audio/Visual Equipment

2.6 1.0 2.0 1.0 3.0 (in mm) c Standard Land Pattern Dimensions 48 41424344454647 20191817161514 4.7μ X 150 S.S.G. Vcc (3.0V) 0.1μ 0.47μ TEA5757HL (PHILIPS) X: CDSCB10M7GA105A-R0 0.1μ 0.1μ 10μ 100μ 100k AFC (n) AFC (p)AF OUT DC OUT 330p 0.22μ 0.1μ Unit C R : F : Ω c Test Circuit CDSCB10M7GA105A-R0 30 23242526272829 1 8765432 2.2μ D.C. OUT S.S.G. Vcc (1.2V) AF OUT 0.01μ 0.01μ 0.01μ 0.01μ 680p TA2154FN (TOSHIBA) X: CDSCB10M7GA113-R0 0.01μ X Unit C R : F : Ω CDSCB10M7GA113-R0 0.01μ 0.01μ 0.01μ 0.01μ 0.01μ 0.47μ 2.2μ 0.1μ 0.1μ 0.22μ 4.7μ 120p 220k 68p 15p 82p 47p 1000p 100p 100p 10k 10k1k IF Input AF Output Vcc (3.0V) (TEXAS INSTRUMENTS) TRF6901 PIC16F84 X Unit C R L : F : Ω : H X: CDSCB10M7GA119-R0 13 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 44 43 42 41 40 39 38 37 18 17 16 15 14 13 12 11 10 123456789 CDSCB10M7GA119-R0 0.47μ 0.01μAF Output D.C. Output LV23100V (SANYO) PIC16F84 (Control IC) 10k 10k 10k Vcc (3.2V) 1μ0.047μ 0.047μ 2.2μ 0.1μ 0.047μ10k75 0.015μ 0.01μ 100μ 10p 100p 10p22μ 10μ 3.3k S.G. X Unit C R : F : ΩX: CDSCB10M7GA121-R0 36 35 34 33 32 31 30 28 29 27 26 25 24 23 22 21 20 19 1234567 9 8 1 01 11 21 31 41 51 61 71 8 CDSCB10M7GA121-R0 Continued on the following page. !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. Unit C R : F : Ω X: CDSCB10M7GA135-R0 1 2 3 4 5 6 7 8 1718192021222324 220k 0.01μ 0.01μ 1000p 0.1μ 0.01μ1000p100p 330p 0.033μ 12p 0.01μ 0.01μ 0.01μ 1000p C.D. 330p10μ S.G. Vcc (5.0V) TH71101, TH71102, TH71111 or TH71112 (MELEXIS) FKS-OUTAF-OUT 330k c Test Circuit CDSCB10M7GA135-R0 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 18 17 16 15 14 13 12 11 10 1718192021222324 Unit C R : F : Ω X: CDSCB10M7GA136-R0 0.1μ 2.2μ 100k 3.3k 0.1μ 100p 10k PIC16F84 (Control IC) TH7122 [Internal AFC Enabled] (MELEXIS) Vcc (5.0V) 0.01μ 0.01μ 0.1μ0.01μ 330p 330p 100k 330p S.G. C.D. FKS-OUT AF-OUT 330p 330p 0.01μ CDSCB10M7GA136-R0 Vcc (3V) 9101112131415 1 8765432 IF IN AF OUT 0.01μ 33μ 0.01μ R 10p 4.7μ X0.01μ 0.01μ 0.01μ + TA31161 (TOSHIBA) X: CDSCB10M7GF072-R0 R: 820 Unit C R L : F : Ω : H CDSCB10M7GF072-R0 0.01μ 0.01μ Vcc (3V) 12k 51k 1000p S.S.G. R D.C. OUT AF OUT X 0.01μ 0.01μ 0.01μ 0.01μ 4.7μ 0.01μ 1.2μ TK14588V (TOKO) Unit C R L : F : Ω : H X: CDSCB10M7GF109-R0 R: 820 910111213141516 87654321 CDSCB10M7GF109-R0 Vcc (5.0V) 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 0.1μ 0.01μ TA31275FN (TOSHIBA)1000p 3300p 0.01μ AF OUT DC-OUT 0.01μ 0.01μ 0.1μ 0.1μ 0.1μ 1.8k 0.01μ X: CDSCB10M7GF123-R0 Unit C R : F : Ω S.S.G. CDSCB10M7GF123-R0 Vcc (5.0V) 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 NJM2295AV (JRC) 0.01μ DC-OUT 100p 0.01μ 10μ 0.01μ 10μ 180 C.D. 0.01μ X: CDSCB10M7GF126-R0 Unit C R : F : Ω S.G. 10μ 10μ CDSCB10M7GF126-R0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

AF Output Voltage (mV) T.H.D. (%) Frequency (MHz) Input fdev. fmod. Vcc = 100dBμ = ±75kHz = 1kHz = 3.0V 100 1000 0.1 100 AF Output Distortion c Recovered Audio Curve CDSCB10M7GA105A-R0 AF Output Voltage (mV) T.H.D. (%) Frequency (MHz) Input fdev. fmod. Vcc = 100dBμ = ±75kHz = 1kHz = 1.2V 100 1000 0.1 100 AF Output Distortion CDSCB10M7GA113-R0 AF Output Voltage (mV) T.H.D. (%) Frequency (MHz) Input fdev. fmod. Vcc = 100dBμ = ±60kHz = 1kHz = 3.0V 100 1000 0.1 100 AF Output Distortion CDSCB10M7GA119-R0 AF Output Voltage (mV) T.H.D. (%) Frequency (MHz) Input fdev. fmod. Vcc = 100dBμ = ±75kHz = 1kHz = 3.2V 100 1000 0.1 100 AF Output Distortion CDSCB10M7GA121-R0 AF Output Voltage (mV) Frequency (MHz) Input fdev. fmod. Vcc = 100dBμ = ±50kHz = 1kHz = 5.0V 100 1000 0.1 CDSCB10M7GA135-R0 AF Output Voltage (mV) Frequency (MHz) Input fdev. fmod. Vcc = 100dBμ = ±50kHz = 1kHz = 5.0V 100 1000 0.1 CDSCB10M7GA136-R0 Continued on the following page. !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. AF Output Voltage (mV) T.H.D. (%) Frequency (MHz) 100 10 1000 100 10 1 10 .1 Input fdev. fmod. Vcc = 100dBμ = ±80kHz = 1kHz = 3.0V c Recovered Audio Curve CDSCB10M7GF072-R0 Input fdev. fmod. Vcc = 100dBμ = ±64kHz = 1kHz = 3.0V AF Output Voltage (mV) T.H.D. (%) Frequency (MHz) 1000 100 100 0.1 10.4 10.6 10.8 11.0 CDSCB10M7GF109-R0 Volt (V) Frequency (MHz) 0.5 0.0 1.0 1.5 2.0 2.5 c S Curve CDSCB10M7GF123-R0 Volt (V) Frequency (MHz) 1.0 2.0 3.0 4.0 CDSCB10M7GF126-R0 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Ceramic Discriminator 10.7MHz Applied IC Reference Table Please see the following table to reference applied IC. If you cannot find the IC part number you are seeking, please contact our sales representative. ex. : CDSCB10M7GA105A-R0 Suffix Number IC Manufacturer IC Part Number Suffix Number TOSHIBA TA2003 TA2007 TA2008A / AN TA2022 TA2057 TA2099N TA2104AFN TA2104F TA2111N / F / FN TA2132 TA2132BP TA2142FN TA2149AN TA2149N TA2154FN TA2159F TA31161 TA31275FN TA7303P TA7640AP TA8122AN / AF TA8132AN / AF TB2132FN 031 033 045 050 057 082 080 080A 077 092 092D 102 100A 100 113 116 072 123 008 006 016 018 128 IC Manufacturer IC Part Number Suffix Number ATMEL INFINEON Panasonic Freescale Renesas NXP ROHM SAMSUNG SANYO SONY T. I. TOKO U4313B U4490B TDA1576T TDA6160X AN7004 AN7232 MC13156 MC13158 μPC1391M NE604 SA605 SA626 SA636DK SA639 TDA1596T TEA5710 TEA5757HL TEA5762 / 5757 UAA3220TS BA1448 BA4230AF BA4234L S1A0903 LA1225M LA1814M LA1823 LA1827M LA1831 LA1832 / M LA1833 LA1835 / M LA1838 / M LA7770 LV23000M LV23100V CX1691M CX-20029 CXA1111 CXA1238 CXA1238N CX1343M CXA1376AM CXA1538M / N / S CXA1611 CX3067M TRF6901 TK14570L TK14583V TK14588V 081 034V 051 038 011 053 049 073 056 020 042 047 096 085 120 040 105A 061 098 060 005 004 118A 108A 115 101 083 043 046 086 048 079 023 114 121 078 001 093 027 027N 032 054 069 075 076 119 122 112 109 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Continued on the following page. Filter is soldered twice within the following temperature conditions. 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered at +350±5°C for 3.0±0.5 seconds. The soldering iron should not touch the filter while soldering. (2) Soldering Iron The component is recommended for use with placement machines that employ optical placement capabilities. The component might be damaged by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines that utilize mechanical positioning. Please contact Murata for details beforehand. (3) Conditions for Placement Machines (a) The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. (c) After installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to degrade. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) When the positioning claws and pick-up nozzle are worn, the load is applied to the components while positioning is concentrated on positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. (e) When correcting components with a soldering iron, the tip of the soldering iron should not directly touch the component. Depending on the soldering conditions, the effective area of terminations may be reduced. Solder containing Ag should be used to prevent electrode erosion. (f) Do not use strong acidity flux, more than 0.2wt% chlorine content, in reflow soldering. (4) Other o Soldering and Mounting Temperature (°C)100 230 260 30 sec. min. 40 sec. max. Peak (260°C max.) Pre-heating (150-180°C) Heating (230°C) Gradual Cooling 120 sec. min.60-120 sec. [Component Direction] [Component Layout Close to Board] Place the component lateral to the direction in which stress acts. Susceptibility to stress is in the order of : A>C>B B A C Slit Perforation c CERAFILr 10.7MHz Chip Type SFECF Series !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

o Storage and Operating Conditions o Rating The component may be damaged if excessive mechanical stress is applied. o Handling 1. Accurate test circuit values are required to measure electrical characteristics. Miscorrelation may be caused if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. The components, packed in a moisture proof bag (dry pack), are sensitive to moisture. The following treatment is required before applying reflow soldering, to avoid reliability degradation caused by thermal stress. When unpacked, store the component in an atmosphere of reflow 30°C and below 60%R.H., and solder within 1 week. 3. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 1. Product Storage Conditions Please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40°C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because solderability may be degraded due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because quality and solderability may be degraded due to storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after package is opened, because quality and solderability may be degraded due to storage under poor conditions. (5) To avoid cracking of ceramic element, please do not drop the products. 4. Other Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Continued from the preceding page. Do not clean or wash the component as it is not hermetically sealed. 2. Wash In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. 3. Coating !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Continued on the following page. Filter is soldered twice within the following temperature conditions. 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered at +350±5°C for 3.0±0.5 seconds. The soldering iron should not touch the filter while soldering. (2) Soldering Iron The component is recommended for use with placement machines that employ optical placement capabilities. Damage may result from excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines that utilize mechanical positioning. Please contact Murata for details beforehand. (3) Conditions for Placement Machines (a) The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. (c) After installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to degrade. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) When the positioning claws and pick-up nozzle are worn, the load is applied to the components while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. (e) When correcting components with a soldering iron, the tip of the soldering iron should not directly touch the component. Depending on the soldering conditions, the effective area of terminations may be reduced. Solder containing Ag should be used to prevent electrode erosion. (f) Do not use strong acidity flux, more than 0.2wt% chlorine content, in reflow soldering. (4) Other o Soldering and Mounting [Component Direction] [Component Layout Close to Board] Put the component lateral to the direction in which stress acts. Susceptibility to stress is in the order of : A>C>B B A C Slit Perforation Temperature (°C)100 230 240 30 sec. min. 30 sec. max. Peak (240°C max.) Pre-heating (150-180°C) Heating (230°C) Gradual Cooling 120 sec. min.60-120 sec. c CERAFILr 10.7MHz Chip Type SFECV/SFECK Series !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

o Storage and Operating Conditions o Rating The component may be damaged if excessive mechanical stress is applied. o Handling 1. Accurate test circuit values are required to measure electrical characteristics. Miscorrelation may be caused if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 1. Product Storage Conditions Please store the products in room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40°C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (Shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because quality and solderability may be degraded due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after package is opened, because quality and solderability may be degraded due to storage under the poor conditions. (5) To avoid cracking of ceramic element, please do not drop the products. 4. Other Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Continued from the preceding page. Do not clean or wash the component as it is not hermetically sealed. 2. Wash In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. 3. Coating !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

c CERAFILr 10.7MHz Lead Type SFELF Series o Storage and Operating Conditions o Rating The component may be damaged if excessive mechanical stress is applied. o Soldering and Mounting The component cannot withstand washing. o Handling 1. Do not use this product with bend. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. Do not apply any type of reflow soldering on the component. 3. Do not clean or wash the component as it is not hermetically sealed. 4. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 5. In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. 6. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 7. For safety purposes, avoid applying a direct current between the terminals. 1. Product Storage Conditions Please store the products in room where the temperature/humidity is stable, and avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40°C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (Shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because quality and solderability may be degraded due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after package is opened, because quality and solderability may be degraded due to storage under the poor conditions. (5) To avoid cracking of ceramic element, please do not drop the products. 4. Other Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Continued on the following page. Filter is soldered twice within the following temperature conditions. 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered at +350±5°C for 3.0±0.5 seconds. The soldering iron should not touch the filter while soldering. (2) Soldering Iron The component is recommended for use with placement machines that employ optical placement capabilities. Damage may result from excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines that utilize mechanical positioning. Please contact Murata for details beforehand. (3) Conditions for Placement Machines (a) The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. (c) After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to degrade. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) When the positioning claws and pick-up nozzle are worn, the load is applied to the components while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. (e) When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. (4) Other o Soldering and Mounting Temperature (°C)100 230 260 30 sec. min. 40 sec. max. Peak (260°C max.) Pre-heating (150-180°C) Heating (230°C) Gradual Cooling 120 sec. min.60-120 sec. [Component Direction] [Component Layout Close to Board] Put the component lateral to the direction in which stress acts. Susceptibility to stress is in the order of : A>C>B B A C Slit Perforation Do not clean or wash the component as it is not hermetically sealed. 2. Wash c CERAFILr 4.5-6.5MHz Chip Type SFSKA Series !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

o Storage and Operating Conditions o Rating The component may be damaged if excessive mechanical stress is applied. o Handling 1. Accurate test circuit values are required to measure electrical characteristics. Miscorrelation may be caused if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 1. Product Storage Conditions Please store the products in room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40°C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (Shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because quality and solderability may be degraded due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after package is opened, because quality and solderability may be degraded due to storage under the poor conditions. (5) To avoid cracking of ceramic element, please do not drop the products. 4. Other Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Continued from the preceding page. In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. 3. Coating !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Continued on the following page. Filter is soldered twice within the following temperature conditions. 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered at +350±5°C for 3.0±0.5 seconds. The soldering iron should not touch the filter while soldering. (2) Soldering Iron The component is recommended for use with placement machines that employ optical placement capabilities. Damage may result from excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines that utilize mechanical positioning. Please contact Murata for details beforehand. (3) Conditions for Placement Machines (a) The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. (c) After installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to degrade. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) When the positioning claws and pick-up nozzle are worn, the load is applied to the components while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. (e) When correcting components with a soldering iron, the tip of the soldering iron should not directly touch the component. Depending on the soldering conditions, the effective area of terminations may be reduced. Solder containing Ag should be used to prevent the electrode erosion. (f) Do not use strong acidity flux, more than 0.2wt% chlorine content, in reflow soldering. (4) Other o Soldering and Mounting Temperature (°C)100 200 260 30 sec. min. 60 sec. max. Peak (260°C max.) Pre-heating (150-170°C) Heating (200°C) Gradual Cooling 120 sec. min.60-120 sec. [Component Direction] Put the component laterally to the direction in which stress acts. [Component Layout Close to Board] Susceptibility to stress is in the order of : A>C>B B A C Slit Perforation c CERAFILr 2.3-5.7MHz Chip Type SFSKB Series !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

o Storage and Operating Conditions o Rating The component may be damaged if excessive mechanical stress is applied. o Handling 1. Accurate test circuit values are required to measure electrical characteristics. Miscorrelation may be caused if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 1. Product Storage Conditions Please store the products in room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40°C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (Shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because quality and solderability may be degraded due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after package is opened, because quality and solderability may be degraded due to storage under the poor conditions. (5) To avoid cracking of ceramic element, please do not drop the products. 4. Other Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Continued from the preceding page. Do not clean or wash the component as it is not hermetically sealed. 2. Wash In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. 3. Coating !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Continued on the following page. Filter is soldered twice within the following temperature conditions. 1. Standard Reflow Soldering Conditions 2. Wash (1) Reflow Electrode is directly soldered with the tip of soldering iron at +350±5°C for 3.0±0.5 seconds. (2) Soldering Iron Do not use strong acidity flux, more than 0.2wt% chlorine content, in reflow soldering. (3) Other s)MMERSION7ASH 2 minutes max. in above solvent at +60°C max. s3HOWEROR2INSE7ASH 2 minutes max. in above solvent at +60°C max. CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA), 7ATER$EMINERALIZED7ATER #LEANING7ATER3OLUTION (Cleanthrough-750H, Pine Alpha 100S), Silicon 4ECHNOCARE&27 3. Coating In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. (1) Cleaning Solvent (2) Cleaning Conditions s7HENCOMPONENTSAREIMMERSEDINSOLVENT BESURETO maintain the temperature of components below the temperature of solvent. s0LEASEDONOTUSEULTRASONICCLEANING s4OTALWASHINGTIMESHOULDBEMINUTESMAXIMUM s0LEASEENSURETHECOMPONENTISTHOROUGHLYEVALUATEDIN your application circuit. s0LEASEDONOTUSECHLORINE PETROLEUMORALKALICLEANING solvent. s)FYOUPLANTOUSEANYOTHERTYPESOFSOLVENTS PLEASE consult with Murata or a Murata representative prior to using. (3) Notice o Soldering and Mounting 0EAK (260°C max.) Heating (230°C) Gradual Cooling Pre-heating (150-180°C) 100 230 260 Temperature (°C) 60-120 sec. SEC max. 30 sec. min. 120 sec. min. c CERAFILr 455kHz Chip Type SFPKA Series !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

o Storage and Operating Conditions o Rating The component may be damaged if excessive mechanical stress is applied. o Handling 1. If the component is cleaned, please confirm that the reliability has not been degraded. 2. The components, packed in a moisture-proof bag (dry pack), are sensitive to moisture. The following treatment is required before applying reflow soldering, to avoid package cracks or reliability degradation caused by thermal stress. When unpacked, store the component in an atmosphere of below 25°C and below 65%R.H., and solder within 48 hours. 3. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 1. Product Storage Conditions Please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40°C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because solderability may be degraded due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because quality and solderability may be degraded due to storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after package is opened, because quality and solderability may be degraded due to storage under poor conditions. (5) To avoid cracking of ceramic element, please do not drop the products. 4. Other Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Continued from the preceding page. !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

o Storage and Operating Conditions o Rating The component may be damaged if excessive mechanical stress is applied. o Soldering and Mounting The component cannot withstand washing. o Handling 1. Do not use this product with bend. The component may be damaged if excessive mechanical stress is applied to it mounted on the printed circuit board. 2. All kinds of reflow soldering must not be applied on the component. 3. Do not clean or wash the component as it is not hermetically sealed. 4. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 5. Conformal coating of the component is not acceptable due to non-sealed construction. 6. Accurate test circuit values are required to measure electrical characteristics. Miscorrelation may be caused if there is any deviation, especially stray capacitance, from the test circuit in the specification. 7. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 1. Product Storage Conditions Please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40°C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because solderability may be degraded due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because quality and solderability may be degraded due to storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after package is opened, because quality and solderability may be degraded due to storage under poor conditions. (5) To avoid cracking of ceramic element, please do not drop the products. 4. Other Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. c CERAFILr 455kHz Lead Type SFPLA/CFWLA/CFULA Series !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Continued on the following page. Filter is soldered twice within the following temperature conditions. 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered at +350±5°C for 3.0±0.5 seconds. The soldering iron should not touch the filter while soldering. (2) Soldering Iron The component is recommended for use with placement machines that employ optical placement capabilities. Damage may result from excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines that utilize mechanical positioning. Please contact Murata for details beforehand. (3) Conditions for Placement Machines (a) The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. (c) After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to degrade. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) When the positioning claws and pick-up nozzle are worn, the load is applied to the components while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. (e) When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. (4) Other o Soldering and Mounting Temperature (°C)100 230 260 30 sec. min. 40 sec. max. Peak (260°C max.) Pre-heating (150-180°C) Heating (230°C) Gradual Cooling 120 sec. min.60-120 sec. [Component Direction] [Component Layout Close to Board] Put the component lateral to the direction in which stress acts. Susceptibility to stress is in the order of : A>C>B B A C Slit Perforation Do not clean or wash the component as it is not hermetically sealed. 2. Wash c Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

o Storage and Operating Conditions o Rating The component may be damaged if excessive mechanical stress is applied. o Handling 1. Accurate test circuit values are required to measure electrical characteristics. Miscorrelation may be caused if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 1. Product Storage Conditions Please store the products in room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40°C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (Shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because quality and solderability may be degraded due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after package is opened, because quality and solderability may be degraded due to storage under the poor conditions. (5) To avoid cracking of ceramic element, please do not drop the products. 4. Other Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Continued from the preceding page. In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. 3. Coating !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Continued on the following page. Filter is soldered twice within the following temperature conditions. 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered at +300±5°C for 3.0±0.5 seconds. The soldering iron should not touch the filter while soldering. (2) Soldering Iron The component is recommended for use with placement machines that employ optical placement capabilities. The component might be damaged by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines that utilize mechanical positioning. Please contact Murata for details beforehand. (3) Conditions for Placement Machines (a) The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. (c) After installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to degrade. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) When the positioning claws and pick-up nozzle are worn, the load is applied to the components while positioning is concentrated on positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. (e) When correcting components with a soldering iron, the tip of the soldering iron should not directly touch the component. Depending on the soldering conditions, the effective area of terminations may be reduced. Solder containing Ag should be used to prevent electrode erosion. (4) Other o Soldering and Mounting Temperature (°C)100 230 260 30 sec. min. 40 sec. max. Peak (260°C max.) Pre-heating (150-180°C) Heating (230°C) Gradual Cooling 120 sec. min.60-120 sec. [Component Direction] [Component Layout Close to Board] Place the component laterally to the direction in which stress acts. Susceptibility to stress is in the order of : A>C>B B A CSlit Perforation c Ceramic Discriminator 10.7MHz Chip Type CDSCB Series !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

o Storage and Operating Conditions o Rating The component may be damaged if excessive mechanical stress is applied. o Handling 1. Accurate test circuit values are required to measure electrical characteristics. Miscorrelation may be caused if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. For safety purposes, avoid applying a direct current between the terminals. 1. Product Storage Conditions Please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40°C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because solderability may be degraded due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because quality and solderability may be degraded due to storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after package is opened, because quality and solderability may be degraded due to storage under poor conditions. (5) To avoid cracking of ceramic element, please do not drop the products. 4. Other Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Continued from the preceding page. Do not clean or wash the component as it is not hermetically sealed. 2. Wash In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. 3. Coating !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

3,000 3,000 1,000 1,000 3,000 CERAFILr<10.7MHz> CERAFILr<2.3-6.5MHz> CERAFILr<455kHz> Ceramic Traps<4.5-6.5MHz> Ceramic Discriminators<10.7MHz> 2,000 2,000 2,000 1,500 500 200 150 200 BoxMagazineBulkAmmo Pack ø180mmø330mm Taping c Minimum Quantity ( ): Reference (in mm) Dimensions of Carrier Tape Dimensions of Reel ø13.0±0.5 2.0±0.5 240 to 280 400 to 560 160 to 190 EmptyComponents Cover film Empty Trailer Leader 17.0±1.0 +1.0 -013.0 -1.5180 +1.0 -060 Chip filter ø1.55±0.05 User direction of feed Cover film Peeling strength (0.1 to 0.7N) 0.3±0.05 1.84±0.1 (0.05)(3°)10° max. 5.5±0.05 4.1±0.1 1.75±0.1 3° max. 4.1±0.1 4.0±0.1 2.0±0.05 4.0±0.1 3.35 12.0±0.2 +0.1 -0.05 s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP c CERAFILr 10.7MHz Chip Type SFECF Series Dimensions of reel ( ) : Reference (in mm) ø13.0±0.5 2.0±0.5 17.0±1.0 240-280 400-560 160-190 EmptyComponents Cover film Empty Trailer Leader 1.7 +0.1–0.05 12.0±0.2 0.3±0.05 7.3±0.01 10° max. Peeling strength 0.1 to 0.7N Cover film s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP User direction of feed 3.0±0.14.0±0.1 ø1.5 +0.1 (3°) Chip filter Dimensions of carrier tape 13.0 +1.0 –0 180 –1.5 +1.0 c CERAFILr 10.7MHz Chip Type SFECV/SFECK Series Continued on the following page. !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. (in mm) Lead length under the hold down tape Length of cut-off Pitch of components Pitch of sprocket hole (1) Length from hole center to lead Length from hole center to component center Lead spacing (1) Lead spacing (2) Slant forward or backward Slant to the left or right Width of carrier tape Width of hold down tape Position of sprocket hole Gap of hold down tape and carrier tape Distance between the center of sprocket hole and lead stopper Diameter of sprocket hole Total tape thickness Pitch of sprocket hole (2) Item Code Dimensions Tolerance Remarks L P F dh dS1 W t P020 3.0 min. 2.0 max. 12.7 12.7 3.85 6.35 5.0 2.5 18.0 6.0 min. 9.0 18.0 ø4.0 0.6 254.0 To distinguish the direction Hold down tape doesn't exceed the carrier tape The pitch of 20 sprocket holes ±0.5 ±0.2 ±0.5 ±0.5 ±0.2 ±1.0 ±1.0 ±0.5 ±0.5 ±0.5 ±0.2 ±0.2 ±1.5 +0.5–0.2 +0.5–0 P2 P F F1 F1 W t dS1 dh dh c CERAFILr 10.7MHz Lead Type SFELF Series Continued on the following page. !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. (in mm) 21.5±1.0 330±2 80±1 17.5±0.5 Empty 240 to 280 min. 400 to 560 160 to 190 ComponentsEmpty Trailer Leader Cover film 2.2±0.5 ø13.0±0.2 Dimensions of Reel User direction of feed Chip filter Cover film Peeling strength (0.1 to 0.7N) +0.1 –0.0 +0.1 –0.05 1.75±0.1 7.5±0.1 16.0±0.22.3±0.1 2.1 0.3±0.05 9.0±0.1 4.3±0.1 (3°)10° max. 8.0±0.1 Dimensions of Carrier Tape +0.1 –0.0ø1.5 s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUPSIDE c CERAFILr 4.5-6.5MHz Chip Type SFSKA Series (in mm) 17.5±1.5 (ø330) (ø80) 13.5±1.0 Empty 240 to 280 400 to 560 160 to 190 ComponentsEmpty Trailer Leader Cover Film 2.2±0.2ø13.0±0.2 Label Dimensions of ReelDimensions of Carrier Tape s0ART.UMBERMARKEDSIDEISALWAYSFACINGUPSIDE ∗ ∗ ∗ ∗ 1.6±0.1 8.0±0.1 5SERDIRECTIONOFFEED 4.2±0.1 Cover Film +0.1 –0.0ø1.52.0±0.1 4.0±0.1 5.6±0.1 5.5±0.1 12.0±0.2 1.75±0.1 c CERAFILr 2.3-5.7MHz Chip Type SFSKB Series Dimensions of Carrier Tape User direction of feed 12.0±0.1 16.0±0.2 8.8±0.1 7.5±0.1 1.75±0.1 4.0±0.1 2.0±0.1 5.3±0.1 ø1.5 7.4±0.1 +0.1-0 Cover film (in mm) Dimensions of Reel Label ø13.0±0.2 2.2±0.5 21.5±1.0 330±2 80±1 240 to 280 400 to 560 160 to 190 17.5±0.5 EmptyComponents Cover film Empty Trailer Leader s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP c CERAFILr 455kHz Chip Type SFPKA Series Continued on the following page. !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. Standard of Magazine Cassette 1. Putting CERAFILr into Magazine A magazine should contain 50pcs of CERAFILr, with ground terminals all facing toward the "Murata" mark on a magazine, and be closed with exclusive stoppers at both ends. Above should be the minimum packaging unit. 2. Quality of Magazine (1) Transparent so that input / output direction is visually recognizable. (2) With an angle of 35° CERAFILr should slip down smoothly. (3) Antistatic finish (4) Recycling Note: Magazines should be sent back for recycling. (Therefore, empty magazines should not be damaged.) 3. Dimensions of Magazine Cassette Material: Polycarbonate Camber of Case: ±1mm max. against entire length (reference) Twist of Case: ±0.5mm max. (reference) (in mm) Tolerance unless otherwise specified: ±0.2 HP51M0003-02 405±1.0 9.0±0.3 7.6±0.25 18.7±0.3 10±0.38.1±0.3 1.1 1.1 c CERAFILr 455kHz Lead Type SFPLA Series Standard of Magazine Cassette 1. Putting CERAFILr into Magazine A magazine should contain 50pcs of CERAFILr, with ground terminals all facing toward the "Murata" mark on a magazine, and be closed with exclusive stoppers at both ends. Above should be the minimum packaging unit. 2. Quality of Magazine (1) Transparent so that input / output direction is visually recognizable. (2) With an angle of 35° CERAFILr should slip down smoothly. (3) Antistatic finish (4) Recycling Note: Magazines should be sent back for recycling. (Therefore, empty magazines should not be damaged.) 3. Magazine should be packaged in a cardboard box. MURATA model name, quantity and outgoing inspection number should be indicated on the box. Cardboard box may contain maximum 33 magazines (1,650 pieces of filter). 4. Dimensions of Magazine Cassette Material: Polycarbonate Camber of Case: ±1mm max. against entire length (reference) Twist of Case: ±0.5mm max. (reference) (in mm) Tolerance unless otherwise specified: ±0.2 muRataHP51M0064 576.0±2.0 9.0±0.3 7.3±0.25 7.5±0.3 18.7±0.3 9.0±0.3 ANTISTATIC 5.3±0.3 0.6 c CERAFILr 455kHz Lead Type CFWLA Series Continued on the following page. !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. (in mm) 21.5±1.0 330±2 80±1 17.5±0.5 Empty 240 to 280 min. 400 to 560 160 to 190 ComponentsEmpty Trailer Leader Cover film 2.2±0.5 ø13.0±0.2 Dimensions of Reel User direction of feed Chip filter Cover film Peeling strength (0.1 to 0.7N) +0.1 –0.0 +0.1 –0.05 1.75±0.1 7.5±0.1 16.0±0.22.3±0.1 2.1 0.3±0.05 9.0±0.1 4.3±0.1 (3°)10° max. 8.0±0.1 Dimensions of Carrier Tape +0.1 –0.0ø1.5 s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUPSIDE c Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series 4.0±0.1 Cover film 4.0±0.1 2.0±0.05 12.0±0.2 (9.0) ø1.5+0.1 ø1.5+0.1 5.5±0.05 1.75±0.1 4.7±0.1 User direction of feed s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP 0.3±0.05 MAX 1.1±0.1(3°) 2.2±0.10EELINGSTRENGTH 0.1 to 0.7N 10° Dimensions of reel ( ): Reference (in mm) ø13.0±0.2 2.0±0.5 17.0±1.0 180+0.1 -1.5 60+0.1 240 to 280 400 to 560 160 to 190 %MPTY#OMPONENTS Cover film %MPTY 4RAILER ,EADER 13.0+1.0 $IMENSIONSOF#ARRIER4APE c Ceramic Discriminator 10.7MHz Chip Type CDSCB Series !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Chip Ceramic Discriminators for FM Ceramic Filters (CERAFILr) for AM Ceramic Filters (CERAFILr) for AM Chip Ceramic Filters (CERAFILr) for FM Chip Ceramic Filters (CERAFILr) for FM Chip Ceramic Filters (CERAFILr) for FM Ceramic Filters (CERAFILr) for FM Chip Ceramic Filters (CERAFILr) for AM Ceramic Filters (CERAFILr) for AM Chip Ceramic Filters (CERAFILr) for TV/VCR Chip Ceramic Filters (CERAFILr) for TV/VCR Chip Ceramic Traps p47 p42 p40, 42 p5-6 p11 p11 p14, 17, 20-21, 23, 25, 27 p38 p40, 42 p31 p34 p45 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Murata Manufacturing Co., Ltd. www.murata.com Note

1 Export Control

For customers outside Japan: No Murata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction [nuclear, chemical or biological weapons or missiles] or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. For customers in Japan: For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license speciﬁ ed by the law is required for export.

2 Please contact our sales representatives or

product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party’ s life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog.

1 Aircraft equipment

2 Aerospace equipment

3 Undersea equipment

4 Power plant equipment

5 Medical equipment

6 Transportation equipment (vehicles, trains,

ships, etc.)

7 Traffi c signal equipment

8 Disaster prevention / crime prevention

9 Data-processing equipment

reliability requirements to the applications listed above

3 Product speciﬁ cations in this catalog are as of July

They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers.

4 Please read rating and CAUTION (for storage,

operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5 This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

6 Please note that unless otherwise speciﬁ ed, we

shall assume no responsibility whatsoever for any conﬂ ict or dispute that may occur in connection with the eff ect of our and/or a third party’ s intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the eff ect that any third parties are authorized to use the rights mentioned above under licenses without our consent.

7 No ozone depleting substances (ODS) under the

Montreal Protocol are used in our manufacturing process. Global Locations For details please visit www.murata.com

Product Information

SFSKA5M50CF00-R3 specifications and overview.

Summary

(Filters/Traps/Discriminators) for Audio/Visual Equipment

Description

(Filters/Traps/Discriminators) for Audio/Visual Equipment

Source title SFSKA5M50CF00-R3 Datasheet(PDF) - Murata Manufacturing Co., Ltd

Related Parts

More parts from the same family.

Browse manufacturer