SFELA10M7HAA0-B0

Online Datasheet

Read SFELA10M7HAA0-B0 online.

P61E7 MURATA | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 57

Technical content

Manufacturing Co., Ltd. Cat.No.P61E-7 Ceramic Filters (CERAFILr) for FM Receivers CERAMIC FILTERS (CERAFILr) Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17

CERAFILr Chip Type SFECV Series 3 Chip CERAFILr SFECV Series Notice 6 CERAFILr Small Chip Type SFECS Series 7 Chip CERAFILr SFECS Series Notice 10 CERAFILr Standard Lead Type 11 CERAFILr Low-loss Type 14 CERAFILr Low-profile Type 17 CERAFILr Lower Spurious Response Type 20 CERAFILr Wider Band-width Type 23 CERAFILr Narrow Band Type 25 CERAFILr For FM -IF Tuners 28 CERAFILr Three-Elements Type SFTLA Series 33 Lead Type CERAFILr Test Circuit and Characteristics Data 36 Lead Type CERAFILr Characteristics Data and Notice 37 Discriminators Chip Type CDACV Series 38 Chip Type Discriminators CDACV Series Notice 41 Discriminators Chip Low-profile Type CDSCA Series 42 Chip Type Discriminators CDSCA Series Notice 44 Discriminators CDALA Series 45 Lead Type Discriminators Notice 49 Packaging 50 Test Circuit of Ceramic Discriminator 53 Example of Appllied Circuit 54

CERAFILr and "CERAFIL" in this catalog are the trademarks of Murata Manufacturing Co., Ltd. Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17

e LA w E q SF r 10M7 t FAA0 y -R0(Global Part Number) qProduct ID wOscillation/Numbers of Element CERAFILr for FM SF Ceramic Filters Four-digit alphanumerics express pass-bandwidth, center frequency tolerance, rank, series, others. Product ID tProduct Specification FAA0 Code Product Specification p is expressed "A " or subsequent code, which indicates the size. eStructure/Size Bulk Plastic Taping ø180mm Plastic Taping ø330mm 1500pcs. /Radial Taping H 0=18mm 1000pcs. /Radial Taping H0=18mm yPackaging -B0 -R0 -R1 -A0 -A1 Code Packaging Radial taping is applied to lead type and plastic taping to chip type. With non-standard products, two-digit alphanumerics indicating "Individual Specification" is added between "tProduct Specification" and "yPackaging".

2 Elements Thickness Expander mode

3 Elements Thickness Expander mode

(2nd Harmonic) (3rd Over Tone) E T K V Code Oscillation/Numbers of Element Lead Type Chip Type Lp/CR C p Code Structure/Size rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (MHz). Decimal point is expressed by capital letter "M". e LA w A r 10M7 t GA u -R0 y 001 q CD(Global Part Number) qProduct ID wOscillation Discriminators for FM CD Discriminators Product ID tProduct Specification GA Code Product Specification Radial taping is applied to lead type and plastic taping to chip type. With non-standard products, an alphanumerics indicating "Individual Specification" is added between "yIC" and "uPackaging". eStructure/Size Bulk Radial Taping H0=18mm Plastic Taping (ø180mm) Plastic Taping (ø330mm) yIC 001 Code IC Applicable IC Control Code uPackaging -B0 -A0 -R0 -R1 Code Packaging Thickness Expander modeA Code Oscillation Lead Type Chip Type Lp/CR C p Code Structure/Size p is expressed "A " or subsequent code, which indicates the size. Two-digit alphanumerics express type, center frequency, rank, others rNominal Center Frequency Expressed by four-digit alphanumerics . The unit is in hertz (MHz). Decimal point is expressed by capital letter "M". o Part Numbering The structure of the "Global Part Numbers" that have been adopted since June 2001 and the meaning of each code are described herein. If you have any questions about details, inquire at your usual Murata sales office or distributor.() Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 1Ceramic Filters (CERAFILr) for FM Receivers CERAFIL r Chip Type SFECV Series SFECV10M7 series for FM-receivers are monolithic type ceramic filters which utilize the energy trapped thickness vibration-mode of the piezoelectric ceramic. By taking advantage of the very low profile, new SFECV series and PFWCC(kHz filter for AM receiver) enable costomers to make AM/FM set so thin, and it can be of help to the total chip circuit. n Features 1. Super-thin. Only 1.5mm. The most suitable ceramic filter available for thinning substrates. 2. Heat resistant. Reflow soldering can be performed because of its excellent heat resistance. 3. Piezoelectric element is connected in the sandwich shape by heat resistant substrate, thus it has excellent mechanical strength, and it is suitable for automatic mounting. 4. Various bandwidths are available. Select a suitable type in accordance with the desired selectivity. 5. Electrical characteristics are the same as conventional "CERAFIL". n Applications 1. Small, thin radios 2. Automotive radios 3. Headphone steros 6.9–0.3 */CR 2.9–0.31.5–0.2 4.05–0.4 Bottom Electrode Side Electrode 1.2–0.5 1.0–0.5 1.0 –0.5 (3) (2) (1) (1) : Input (2) : Ground (3) : Output : EIAJ Monthly Code : Center Frequency Rank Code : Marking (in mm) 1.0–0.5 Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz] Center frequency(fo) defined by the center of 3dB bandwidth. n Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz–30kHz 10.67MHz–30kHz 10.70MHz–30kHz 10.73MHz–30kHz 10.76MHz–30kHz 25kHz Step 10.650MHz–25kHz 10.675MHz–25kHz 10.700MHz–25kHz 10.725MHz–25kHz 10.750MHz–25kHz Combination A,B,C,D,E Combination A,B,C

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n Frequency Characteristics SFECV10M7KA00-R0 9.700 10.200 10.700 Frequency (M H z) Attenuation (dB) 11.200 11.700 SFECV10M7JA00-R0 9.700 10.200 10.700 Frequency (M H z) Attenuation (dB) 11.200 11.700 SFECV10M7HA00-R0 6.00 5.50 5.00 4.50 4.00 3.50 3.00 2.50 Frequency (M H z) Attenuation (dB) G .D .T. (µsec.) SFECV10M7GA00-R0 0 5.50 1 5.00 2 4.50 3 4.00 4 3.50 5 3.00 6 2.50 7 2.00 Frequency (M H z) Attenuation (dB) G .D .T. (µsec.) SFECV10M7FA00-R0 0 5.00 1 4.50 2 4.00 3 3.50 4 3.00 5 2.50 6 2.00 7 1.50 Frequency (M H z) Attenuation (dB) G .D .T. (µsec.) n Frequency Characteristics (Spurious) SFECV10M7KA00-R0 8.700 9.700 10.700 Frequency (M H z) Attenuation (dB) 11.700 12.700 SFECV10M7JA00-R0 8.700 9.700 10.700 Frequency (M H z) Attenuation (dB) 11.700 12.700 Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Continued from the preceding page. n Frequency Characteristics (Spurious) SFECV10M7HA00-R0 Frequency (M H z) Attenuation (dB) SFECV10M7GA00-R0 Frequency (M H z) Attenuation (dB) SFECV10M7FA00-R0 Frequency (M H z) Attenuation (dB) n Standard Land Pattern Dimensions (in m m )Land 1.2 1.65 2.85 2.85 1.65 1.2 1.2 4.0 n Test Circuit (1) (3) (2) R 2 C 2 E2 R F Voltm eter R 1 S.S.G . =-10dBm R g R g = 50Ω R 1 = 280Ω –5% R 2 = 330Ω –5% C 2 = 10 – 2 pF (Including stray capacitance and Input capacitance of R F Volt M eter) (1): Input (2): G round (3): O utput

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 C hip C ER A FILr SFEC V Series N otice n Notice (Soldering and Mounting) 1. Standard Reflow Soldering Condition (1) R eflow The com ponent cannot be w ithstand w ashing. 2. Wash Lead term inal is directly contacted w ith the tip of soldering iron of 280±5˚C for 3.0±0.5 seconds. (2) Soldering Iron 60 30 Tim e(sec.) 5sec. 150 230 240 Tem peraturu(°C ) G radual C ooling n Notice (Handling) 1. The com ponent w ill be dam aged w hen an excessive stress is applied. 2. The com ponent m ay be dam aged if excess m echanical stress is applied to it m ounted on the printed circuit board. 3. D esign layout of com ponents on the PC board to m inim ize the stress im posed on the w arp or flexure of the board. 4. After installing chips, if solder is excessively applied to the circuit board, m echanical stress w ill cause destruction resistance characteristics to low er. To prevent this, be extrem ely careful in determ ining shape and dim ension before designing the circuit board diagram . 5. W hen the positioning claw s and pick up nozzle are w orn, the load is applied to the chip w hile positioning is concentrated to one positioning accuracy, etc. C areful checking and m aintenance are necessary to prevent unexpected trouble. 6. W hen correcting chips w ith a soldering iron, the tip of the soldering iron should not directly touch the chip com ponent. D epending on the soldering conditions, the effective area of term inations m ay be reduced. the use of solder containing Ag should be done to prevent the electrode erosion. 7. D o not clean or w ash the com ponent as it is not herm etically sealed. 8. In case of covering filter w ith over coat, conditions such as m aterial of resin, cure tem perature, and so on should be evaluated w ell. 9. D o not use strong acidity flux, m ore than 0.2w t% chlorine content, in re-flow soldering. 10. Accurate test circuit values are required to m easure electrical characteristics.It m ay be a cause of m is- correlation if there is any deviation, especially stray capacitance, from the test circuit in the specification. [C om ponent direction] [C om ponent layout close to board] Put the com ponent lateral to the direction in w hich stress acts. Susceptibility to stress is in the order of : A>C >B B A C Slit P erforation

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers C ER A FILr Sm all C hip Type SFEC S Series SFEC S10M 7 series for FM -receivers are sm all, high perform ance and super thin (1.4m m ) filters. Piezoelectric elem ent is connected in the sandw ich shape by ceram ics substrate. They have 1.4m m thickness and sm all m ounting area. (3.5x3.1m m ) N ew SFEC S series and PFW C C (kH z filter for AM receiver) enable custom ers to m ake AM /FM set so thin and sm all sized. n Features 1. The filters are m ountable by autom atic placers. 2. They are slim , at only 1.4m m thickness, and have a sm all m ounting area (3.5x3.1m m ) enabling flexible PC B design. 3. Various bandw idths are available. Select a suitable type in accordance w ith the desires selectivity. 4. O perating tem perature range : -20 to +80 (degree C ) Storage tem perature range : -40 to +85 (degree C ) n Applications 1. Sm all, thin radios 2. H eadphone stereos F A (1) : Input (2) : G round (3) : Float (Signal line) (4) : O utput (*) : R eference : EIAJ M onthly C ode (1) (4) (2) (3) 3.45T0.2 (1.35) (1.35) (1.30) (1.30) 1.4T0.1 0.85T0.30.85T0.3 Input electrode m arker 3.10T0.2 0-0.3 0-0.3 W0.3Y0.20.4 (in m m ) Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Area of Attenuation : [w ithin 20dB] Area of Spurious Attenuation : [w ithin 9M H z to 12M H z] C enter frequency(fo) defined by the center of 3dB bandw idth. n Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz–30kHz 10.67MHz–30kHz 10.70MHz–30kHz 10.73MHz–30kHz 10.76MHz–30kHz 25kHz Step 10.650MHz–25kHz 10.675MHz–25kHz 10.700MHz–25kHz 10.725MHz–25kHz 10.750MHz–25kHz Combination A,B,C,D,E Combination A,B,C

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n Frequency Characteristics SFECS10M7HA00-R0 Attenuation (dB) G .D .T. (µsec.) Frequency (M H z) 5.00 4.80 4.60 4.40 4.20 4.00 3.80 3.60 5.60 5.40 5.20 SFECS10M7GA00-R0 Attenuation (dB) G .D .T. (µsec.) Frequency (M H z) 5.00 4.80 4.60 4.40 4.20 4.00 3.80 3.60 3.40 3.20 SFECS10M7FA00-R0 Attenuation (dB) G .D .T. (µsec.) Frequency (M H z) 4.60 4.40 4.20 4.00 3.80 3.60 3.40 3.20 3.00 2.80 n Frequency Characteristics (Spurious) SFECS10M7HA00-R0 Attenuation (dB) Frequency (M H z) SFECS10M7GA00-R0 Attenuation (dB) Frequency (M H z) SFECS10M7FA00-R0 Attenuation (dB) Frequency (M H z)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n Standard Land Pattern Dimensions (4) (1) (2) (3) (1) : Input (2) : G round (3) : Float Signal Line (4) : O ut put (in m m )It show s solder resist land pattern. 0.3 0.3 0.3 1.051.401.05 0.1 0.1 0.10.10.10.1 n Test Circuit R g=50Ω R 1=280Ω R 2=330Ω C 2=10pF (Including stray capacitance and Input capacitance of R F Voltm eter) R F Voltm eter E2C 2E1 R 2 R 1 R g S.S.G . =-10dBm (4)(1) (2) (3) (1) : Input (2) : G round (3) : Float (4) : O utput

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 C hip C ER A FILr SFEC S Series N otice n Notice (Soldering and Mounting) 1. Standard Reflow Soldering Condition (1) R eflow The com ponent cannot be w ithstand w ashing. 2. Wash Filter shall be soldered at 280±5˚C for 3.0±0.5 seconds. The soldering iron shall not touch the filter w hite soldering. (2) Soldering Iron Tem perature (˚C ) 100 200 240 30 sec. m in. 30 sec. m ax. Peak (240˚C m ax.) Pre-heating (120-170˚C ) H eating (200˚C ) G radual C ooling 120 sec. m in.60-120 sec. n Notice (Handling) 1. The com ponent w ill be dam aged w hen an excessive stress is applied. 2. The com ponent m ay be dam aged if excess m echanical stress is applied to it m ounted on the printed circuit board. 3. D esign layout of com ponents on the PC board to m inim ize the stress im posed on the w arp or flexure of the board. 4. After installing chips, if solder is excessively applied to the circuit board, m echanical stress w ill cause destruction resistance characteristics to low er. To prevent this, be extrem ly careful in determ ining shape and dim ension before designing the circuit board diagram . 5. W hen the positioning claw s and pick up nozzle are w orn, the load is applied to the chip w hile positioning is concentrated to one positioning accuracy, etc. C areful checking and m aintenance are necessary to prevent unexpected trouble. 6. W hen correcting chips w ith a soldering iron, the tip of the soldering iron should not directly touch the chip com ponent. D epending on the soldering conditions, the effective area of term inations m ay be reduced. The use of solder containing Ag should be done to prevent the electrode erosion. 7. D o not clean or w ash the com ponent as it is not herm etically sealed. 8. In case of covering filter w ith over coat, conditions such as m aterial of resin, cure tem perature, and so on should be evaluated w ell. 9. D o not use strong acidity flux, m ore than 0.2w t% chlorine content, in re-flow soldering. 10. Accurate test circuit values are required to m easure electrical characteristics. It m ay be a cause of m is-correlation if there is any deviation, especially stray capacitance, from the test circuit in the specification. [C om ponent layout close to board] Susceptibility to stress is in the order of : A>C >B B A CSlit P erforation

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers C ER A FILr Standard Lead Type SFELA10M 7 series for FM -receivers are m onolithic type ceram ic filters w hich use the energy trapped thickness vibration-m ode of the piezoelectric ceram ic. n Features 1. These m iniature filters have high m echanical strength. 2. Low loss, favorable w aveform sym m etry, and high selectivity. 3. Various band w idths are available for applications in w ide to narrow bands. 4. Sm all dispersion and stable characteristics. 5. C hange in center frequency is typically w ithin –30ppm /(degree C ) at -20 to +80 (degree C ). 6. H igh reliability. (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.1 0.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in m m ) (1) : Input (2) : G round (3) : O utput SFELA10M7HA00-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.1 0.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in m m ) (1) : Input (2) : G round (3) : O utput SFELA10M7GA00-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.1 0.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in m m ) (1) : Input (2) : G round (3) : O utput SFELA10M7FA00-B0 Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Area of Attenuation : [w ithin 20dB] Area of Spurious Attenuation : [w ithin 9M H z to 12M H z] C enter frequency(fo) defined by the center of 3dB bandw idth.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz–30kHz 10.67MHz–30kHz 10.70MHz–30kHz 10.73MHz–30kHz 10.76MHz–30kHz 25kHz Step 10.650MHz–25kHz 10.675MHz–25kHz 10.700MHz–25kHz 10.725MHz–25kHz 10.750MHz–25kHz Combination A,B,C,D,E Combination A,B,C n Frequency Characteristics SFELA10M7HA00-B0 6.00 5.50 5.00 4.50 4.00 3.50 3.00 2.50 Attenuation (dB) G .D .T. (µsec.) Frequency (M H z) SFELA10M7GA00-B0 5.50 5.00 4.50 4.00 3.50 3.00 2.50 2.00 Frequency (M H z) Attenuation (dB) G .D .T. (µsec.) SFELA10M7FA00-B0 5.00 4.50 4.00 3.50 3.00 2.50 2.00 1.50 Frequency (M H z) Attenuation (dB) G .D .T. (µsec.) n Frequency Characteristics (Spurious) SFELA10M7HA00-B0 Frequency (M H z) Attenuation (dB) SFELA10M7GA00-B0 Attenuation (dB) Frequency (M H z) Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Continued from the preceding page. n Frequency Characteristics (Spurious) SFELA10M7FA00-B0 Frequency (M H z) Attenuation (dB) n Spurious Response SFELA10M7FA00-B0 Frequency (M H z) 0 20 40 60 80 100 Attenuation (dB)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers C ER A FILr Low -loss Type SFELA10M 7 series for FM -receivers are m onolithic type ceram ic filters w hich use the energy trapped thickness vibration-m ode of the piezoelectric ceram ic. n Features 1. Insertion loss is 1 to 1.5dB low er than conventional products. This types are useful for elevating the sensitivity of sets. 2. Sm all dispersion and stable characteristics. 3. Excellent shape factor of frequency response. 4. G ood w aveform sym m etry. (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.1 0.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in m m ) (1) : Input (2) : G round (3) : O utput SFELA_JAA0-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.1 0.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in m m ) (1) : Input (2) : G round (3) : O utput SFELA_HAA0-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.1 0.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in m m ) (1) : Input (2) : G round (3) : O utput SFELA_GAA0-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.1 0.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in m m ) (1) : Input (2) : G round (3) : O utput SFELA_FAA0-B0 Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Area of Attenuation : [w ithin 20dB] Area of Spurious Attenuation : [w ithin 9M H z to 12M H z] C enter frequency(fo) defined by the center of 3dB bandw idth.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz–30kHz 10.67MHz–30kHz 10.70MHz–30kHz 10.73MHz–30kHz 10.76MHz–30kHz 25kHz Step 10.650MHz–25kHz 10.675MHz–25kHz 10.700MHz–25kHz 10.725MHz–25kHz 10.750MHz–25kHz Combination A,B,C,D,E Combination A,B,C n Frequency Characteristics SFELA10M7JAA0-B0 Attenuation (dB) 0 7.50 Frequency (M H z) G .D .T. (µsec.) 1 7.00 2 6.50 3 6.00 4 5.50 5 5.00 6 4.50 7 4.00 SFELA10M7HAA0-B0 Attenuation (dB) 6.50 6.00 5.50 5.00 4.50 4.00 3.50 3.00 Frequency (M H z) G .D .T. (µsec.) SFELA10M7GAA0-B0 Frequency (M H z) Attenuation (dB) G .D .T. (µsec.) 6.50 1 6.00 2 5.50 3 5.00 4 4.50 5 4.00 6 3.50 7 3.00 SFELA10M7FAA0-B0 Frequency (M H z) Attenuation (dB) G .D .T. (µsec.) 0 5.50 1 5.00 2 4.50 3 4.00 4 3.50 5 3.00 6 2.50 7 2.00 n Frequency Characteristics (Spurious) SFELA10M7JAA0-B0 Attenuation (dB) Frequency (M H z) SFELA10M7HAA0-B0 Attenuation (dB) Frequency (M H z) Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Continued from the preceding page. n Frequency Characteristics (Spurious) SFELA10M7GAA0-B0 Frequency (M H z) Attenuation (dB) SFELA10M7FAA0-B0 Frequency (M H z) Attenuation (dB)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers C ER A FILr Low -profile Type SFELB10M 7 series for FM -receivers are m onolithic type ceram ic filters w hich use the energy trapped thickness vibration-m ode of the piezoelectric ceram ic. n Features 1. Installed height is 5 m m , m aking it w ell suited for com pact, thin sets. 2. Environm ental reliability is the sam e as those of the ceram ic filter SFELA10M 7 series. 6.0 m ax. (1) (2) (3) 7.5±2.0 5.0±1.03.0±1.0 2.5±0.22.5±0.2 1.3±0.1 0.3±0.1 0.5–0.1 1.5±0.1 E I A J C O D EM A R K I N G in m m (1) : Input (2) : G round (3) : O utput SFELB10M7KA00-B0 6.0 m ax. (1) (2) (3) 7.5±2.0 5.0±1.03.0±1.0 2.5±0.22.5±0.2 1.3±0.1 0.3±0.1 0.5–0.1 1.5±0.1 E I A J C O D EM A R K I N G in m m (1) : Input (2) : G round (3) : O utput SFELB10M7JA00-B0 6.0 m ax. (1) (2) (3) 7.5±2.0 5.0±1.03.0±1.0 2.5±0.22.5±0.2 1.3±0.1 0.3±0.1 0.5–0.1 1.5±0.1 E I A J C O D EM A R K I N G in m m (1) : Input (2) : G round (3) : O utput SFELB10M7HA00-B0 6.0 m ax. (1) (2) (3) 7.5±2.0 5.0±1.03.0±1.0 2.5±0.22.5±0.2 1.3±0.1 0.3±0.1 0.5–0.1 1.5±0.1 E I A J C O D EM A R K I N G in m m (1) : Input (2) : G round (3) : O utput SFELB10M7GA00-B0 6.0 m ax. (1) (2) (3) 7.5±2.0 5.0±1.03.0±1.0 2.5±0.22.5±0.2 1.3±0.1 0.3±0.1 0.5–0.1 1.5±0.1 E I A J C O D EM A R K I N G in m m (1) : Input (2) : G round (3) : O utput SFELB10M7FA00-B0 Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Area of Attenuation : [w ithin 20dB] Area of Spurious Attenuation : [w ithin 9M H z to 12M H z] C enter frequency(fo) defined by the center of 3dB bandw idth.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz–30kHz 10.67MHz–30kHz 10.70MHz–30kHz 10.73MHz–30kHz 10.76MHz–30kHz 25kHz Step 10.650MHz–25kHz 10.675MHz–25kHz 10.700MHz–25kHz 10.725MHz–25kHz 10.750MHz–25kHz Combination A,B,C,D,E Combination A,B,C n Frequency Characteristics SFELB10M7KA00-B0 Attenuation (dB) 0 8.00 Frequency (M H z) G .D .T. (µsec.) 1 7.50 2 7.00 3 6.50 4 6.00 5 5.50 6 5.00 7 4.50 SFELB10M7JA00-B0 Frequency (M H z) Attenuation (dB) G .D .T. (µsec.) 10.700 7.00 10.60010.500 10.800 10.900 2 6.50 3 6.00 4 5.50 5 5.00 6 4.50 7 4.00 0 7.50 SFELB10M7HA00-B0 Frequency (M H z) Attenuation (dB) G .D .T. (µsec.) 7.00 1 6.50 2 6.00 3 5.50 4 5.00 5 4.50 6 4.00 7 3.50 SFELB10M7GA00-B0 Attenuation (dB) 0 6.50 Frequency (M H z) G .D .T. (µsec.) 1 6.00 2 5.50 3 5.00 4 4.50 5 4.00 6 3.50 7 3.00 SFELB10M7FA00-B0 Frequency (M H z) Attenuation (dB) G .D .T. (µsec.) 5.50 1 5.00 2 4.50 3 4.00 4 3.50 5 3.00 6 2.50 7 2.00

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n Frequency Characteristics (Spurious) SFELB10M7KA00-B0 Attenuation (dB) Frequency (M H z) SFELB10M7JA00-B0 Frequency (M H z) Attenuation (dB) 10.700 9.7008.700 11.700 12.700 SFELB10M7HA00-B0 Frequency (M H z) Attenuation (dB) 10.700 9.7008.700 11.700 12.700 SFELB10M7GA00-B0 Attenuation (dB) Frequency (M H z) SFELB10M7FA00-B0 Frequency (M H z) Attenuation (dB)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers C ER A FILr Low er Spurious R esponse Type SFELA10M 7 series for FM -receivers are m onolithic type ceram ic filters w hich use the energy trapped thickness vibration-m ode of the piezoelectric ceram ic. n Features 1. This type has low er spurious response com pared to the standard filters. 2. This types are suitable for higher spurious suppression radio. (1)(2)(3) 7.5–2.0 5.0–1.03.0–1.0 2.5–0.2 0.5–0.1 1.7–0.1 0.3–0.1 1.38–0.2 2.5–0.2 7.0–2.0 M AR KIN G EIAJ C O D E SFELA10M7KAB0-B0 (1)(2)(3) 7.5–2.0 5.0–1.03.0–1.0 2.5–0.2 0.5–0.1 1.7–0.1 0.3–0.1 1.38–0.2 2.5–0.2 7.0–2.0 M AR KIN G EIAJ C O D E SFELA10M7JAB0-B0 (1)(2)(3) 7.5–2.0 5.0–1.03.0–1.0 2.5–0.2 0.5–0.1 1.7–0.1 0.3–0.1 1.38–0.2 2.5–0.2 7.0–2.0 M AR KIN G EIAJ C O D E SFELA10M7HAB0-B0 (1)(2)(3) 7.5–2.0 5.0–1.03.0–1.0 2.5–0.2 0.5–0.1 1.7–0.1 0.3–0.1 1.38–0.2 2.5–0.2 7.0–2.0 M AR KIN G EIAJ C O D E SFELA10M7GAB0-B0 (1)(2)(3) 7.5–2.0 5.0–1.03.0–1.0 2.5–0.2 0.5–0.1 1.7–0.1 0.3–0.1 1.38–0.2 2.5–0.2 7.0–2.0 M AR KIN G EIAJ C O D E SFELA10M7FAB0-B0 Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Area of Attenuation : [w ithin 20dB] Area of Spurious Attenuation : [w ithin 9M H z to 12M H z] C enter frequency(fo) defined by the center of 3dB bandw idth.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz–30kHz 10.67MHz–30kHz 10.70MHz–30kHz 10.73MHz–30kHz 10.76MHz–30kHz 25kHz Step 10.650MHz–25kHz 10.675MHz–25kHz 10.700MHz–25kHz 10.725MHz–25kHz 10.750MHz–25kHz Combination A,B,C,D,E Combination A,B,C n Frequency Characteristics SFELA10M7KAB0-B0 Frequency (M H z) Attenuation (dB) G .D .T. (µsec.) 8.00 1 7.50 2 7.00 3 6.50 4 6.00 5 5.50 6 5.00 7 4.50 SFELA10M7JAB0-B0 Frequency (M H z) Attenuation (dB) G .D .T. (µsec.) 7.00 1 6.50 6.00 5.50 4 5.00 5 4.50 6 4.00 7 3.50 SFELA10M7HAB0-B0 Attenuation (dB) 0 6.50 Frequency (M H z) G .D .T. (µsec.) 1 6.00 2 5.50 3 5.00 4 4.50 5 4.00 6 3.50 7 3.00 SFELA10M7GAB0-B0 Attenuation (dB) 0 6.00 Frequency (M H z) G .D .T. (µsec.) 1 5.50 2 5.00 3 4.50 4 4.00 5 3.50 6 3.00 7 2.50 SFELA10M7FAB0-B0 Attenuation (dB) 0 5.00 Frequency (M H z) G .D .T. (µsec.) 1 4.50 2 4.00 3 3.50 4 3.00 5 2.50 6 2.00 7 1.50

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n Frequency Characteristics (Spurious) SFELA10M7KAB0-B0 Frequency (M H z) Attenuation (dB) SFELA10M7JAB0-B0 Frequency (M H z) Attenuation (dB) SFELA10M7HAB0-B0 Attenuation (dB) Frequency (M H z) SFELA10M7GAB0-B0 Attenuation (dB) Frequency (M H z) SFELA10M7FAB0-B0 Attenuation (dB) Frequency (M H z)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers C ER A FILr W ider B and-w idth Type SFELA10M 7 Series for FM -receivers are m onolithic type ceram ic filters w hich use the energy trapped thickness vibration-m ode of the piezoelectric ceram ic. n Features 1. R ealizes w ider or narrow er band characteristics not obtained by conventional ceram ic filters. 2. Tem perature characteristics are the best available, the sam e as those of M urata's conventional ceram ic filters. Thus, even in the case of narrow band filters, the center frequency is stable even if tem perature changes. (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.1 0.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in m m ) (1) : Input (2) : G round (3) : O utput SFELA10M7EA00-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.1 0.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in m m ) (1) : Input (2) : G round (3) : O utput SFELA10M7DF00-B0 Part Number Center Frequency (fo) (MHz) Nominal Center Frequency(fn) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Area of Attenuation : [w ithin 20dB] Area of Spurious Attenuation : [w ithin 9M H z to 12M H z] C enter frequency(fo) defined by the center of 3dB bandw idth. (fn) m eans nom inal center frequency. n Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz–30kHz 10.67MHz–30kHz 10.70MHz–30kHz 10.73MHz–30kHz 10.76MHz–30kHz 25kHz Step 10.650MHz–25kHz 10.675MHz–25kHz 10.700MHz–25kHz 10.725MHz–25kHz 10.750MHz–25kHz Combination A,B,C,D,E Combination A,B,C

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n Frequency Characteristics SFELA10M7EA00-B0 4.50 4.00 3.50 3.00 2.50 2.00 1.50 1.00 Frequency (M H z) Attenuation (dB) G .D .T. (µsec.) SFELA10M7DF00-B0 4.00 3.50 3.00 2.50 2.00 1.50 1.00 0.50 Attenuation (dB) G .D .T. (µsec.) Frequency (M H z) n Frequency Characteristics (Spurious) SFELA10M7EA00-B0 Frequency (M H z) Attenuation (dB) SFELA10M7DF00-B0 Frequency (M H z) Attenuation (dB)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers C ER A FILr N arrow B and Type SFELA10M 7LFTA/KAH 0, SFVLA/SFKLA series realizes narrow er band characteristics not obtained by conventional ceram ic filters. Besides, low spurious and tem perature characteristics is stable. This series suits for European car-audio or AM up conversion use that needs narrow band characteristics. (1)(2)(3) 10.0–2.0 5.0–1.03.5 2.5–0.2 0.5–0.1 1.7–0.1 0.3–0.1 1.38–0.2 2.5–0.2 10.0–2.0 M A R K I N G E I A J C O D E +1.5 –1.0 in m m SFKLA10M7NF00-B0 M A R K IN G 7.0± 2.0 2.5± 0.2 0.5± 0.1 1.4± 0.1 1.65± 0.1 2.5± 0.2 0.3± 0.1 (3) (2) (1) E IA J C O D E in m m (1) : Input (2) : G round (3) : O utput SFVLA10M7MF00-B0 M A R K IN G 7.0± 2.0 2.5± 0.2 0.5± 0.1 1.4± 0.1 1.65± 0.1 2.5± 0.2 0.3± 0.1 (3) (2) (1) E IA J C O D E in m m (1) : Input (2) : G round (3) : O utput SFVLA10M7LF00-B0 0.3– 0.1 0.5– 0.1 (1) Input (2) G round (3) O utput 1.7– 0.1 1.38– 0.2 7.0– 2.0 M AR KIN G EIAJ C O D E (3) (2) (1) (in m m ) SFELA10M7LFTA01-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.1 0.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in m m ) (1) : Input (2) : G round (3) : O utput SFELA10M7KAH0-B0 Part Number Center Frequency (fo) (MHz) Nominal Center Frequency(fn) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Area of Attenuation : [w ithin 20dB] Area of Spurious Attenuation : [w ithin 9M H z to 12M H z]

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz–30kHz 10.67MHz–30kHz 10.70MHz–30kHz 10.73MHz–30kHz 10.76MHz–30kHz 25kHz Step 10.650MHz–25kHz 10.675MHz–25kHz 10.700MHz–25kHz 10.725MHz–25kHz 10.750MHz–25kHz Combination A,B,C,D,E Combination A,B,C n Frequency Characteristics SFKLA10M7NF00-B0 Attenuation ( dB ) Frequency ( kH z ) SFVLA10M7MF00-B0 Attenuation (dB) 0 19.0 Frequency (M H z) G .D .T. (µsec.) 1 18.0 2 17.0 3 16.0 4 15.0 5 14.0 6 13.0 7 12.0 SFVLA10M7LF00-B0 Attenuation (dB) 0 13.0 Frequency (M H z) G .D .T. (µsec.) 1 12.0 2 11.0 3 10.0 4 9.00 5 8.00 6 7.00 7 6.00 SFELA10M7LFTA01-B0 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 9 10.580 10.640 10.700 Frequency (M H z) 10.760 10.820 Attenuation (dB) G .D .T. (µsec.) 11.00 10.50 SFELA10M7KAH0-B0 8.00 7.50 7.00 6.50 6.00 5.50 5.00 4.50 Frequency (M H z) Attenuation (dB) G .D .T. (µsec.)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n Frequency Characteristics (Spurious) SFKLA10M7NF00-B0 9.700 Frequency ( M H z ) Attenuation ( dB ) 10.200 10.700 11.200 11.700 SFVLA10M7MF00-B0 Attenuation (dB) Frequency (M H z) SFVLA10M7LF00-B0 Attenuation (dB) Frequency (M H z) SFELA10M7LFTA01-B0 10.70010.2009.700 11.200 11.700 Attenuation (dB) Frequency (M H z) SFELA10M7KAH0-B0 Frequency (M H z) Attenuation (dB)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers C ER A FILr For FM -IF Tuners SFELA10M 7 series for FM -receivers are m onolithic type ceram ic filters w hich use the energy trapped thickness vibration-m ode of the piezoelectric ceram ic. n Features 1. Little dispersion of am plitude characteristics and phase characteristics (G . D . T. characteristics). 2. The SFELA10M 7G _X series has G . D . T characteristics and is useful for obtaining low distortion. SFELA10M 7F_L series, in these ceram ic filters, being in harm ony w ith flatness of G . D . T. , roundness of the am plitude and selectivity characteristics, therefore, these ceram ic filters are suitable to high-grade stereo tuners. Even if m ism atching condition, they can keep little distortion because of low Q m of ceram ic m aterial. The SFELA10M 7FA0G series is based on SFELA10M 7FA00/G A00/H A00, and it obtains high selectivity w ith low loss. There is little dispersion of am plitude and G . D . T. characteristics, and low distortion rate can be obtained. 3. All products are inspected for sym m etry and roundness of am plitude characteristics, and the flatness of G . D . T. characteristics. M A R K IN G 9.0 m ax. 0.5± 0.1 1.7± 0.1 1.38± 0.2 (3) (2) (1) E IA J C O D E SFELA10M7JAXE-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.1 0.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in m m ) (1) : Input (2) : G round (3) : O utput SFELA10M7HA0G-B0 M A R K IN G 9.0 m ax. 0.5± 0.1 1.7± 0.1 1.38± 0.2 (3) (2) (1) E IA J C O D E SFELA10M7HAXD-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.1 0.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in m m ) (1) : Input (2) : G round (3) : O utput SFELA10M7GA0G-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.1 0.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in m m ) (1) : Input (2) : G round (3) : O utput SFELA10M7GALM-B0 Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Continued from the preceding page. M A R K IN G E IA J C O D E 9.0 m ax. 0.5± 0.1 1.7± 0.1 1.38± 0.2 (3) (2) (1) in m m (1) : Input (2) : G round (3) : O utput SFELA10M7GAXA-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.1 0.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in m m ) (1) : Input (2) : G round (3) : O utput SFELA10M7FA0G-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.1 0.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in m m ) (1) : Input (2) : G round (3) : O utput SFELA10M7GALP03-B0 M A R K IN G E IA J C O D E 9.0 m ax. 0.5± 0.1 1.7± 0.1 1.38± 0.2 (3) (2) (1) in m m (1) : Input (2) : G round (3) : O utput SFELA10M7GAXX-B0 (1)(2)(3) 7.0±2.0 5.0±1.0 2.5±0.2 0.5±0.1 1.7±0.1 0.3±0.1 1.38±0.2 2.5±0.2 7.0±2.0 M A R K I N G E I A J C O D E 3.0±1.0 (in m m ) (1) : Input (2) : G round (3) : O utput SFELA10M7FALL-B0 Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) GDT Bandwidth (kHz) Area of Attenuation : [w ithin 20dB] Area of Spurious Attenuation : [w ithin 9M H z to 12M H z] C enter frequency(fo) defined by the center of 3dB bandw idth.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz–30kHz 10.67MHz–30kHz 10.70MHz–30kHz 10.73MHz–30kHz 10.76MHz–30kHz 25kHz Step 10.650MHz–25kHz 10.675MHz–25kHz 10.700MHz–25kHz 10.725MHz–25kHz 10.750MHz–25kHz Combination A,B,C,D,E Combination A,B,C n Freq. Characteristics SFELA10M7JAXE-B0 Attenuation (dB) 0 5.00 Frequency (M H z) G .D .T. (µsec.) 1 4.75 2 4.50 3 4.25 4 4.00 5 3.75 6 3.50 7 3.25 SFELA10M7HA0G-B0 Attenuation (dB) 0 6.00 Frequency (M H z) G .D .T. (µsec.) 1 5.50 2 5.00 3 4.50 4 4.00 5 3.50 6 3.00 7 2.50 SFELA10M7HAXD-B0 Attenuation (dB) 0 4.50 Frequency (M H z) G .D .T. (µsec.) 1 4.25 2 4.00 3 3.75 4 3.50 5 3.25 6 3.00 7 2.75 SFELA10M7GA0G-B0 Attenuation (dB) 0 6.00 Frequency (M H z) G .D .T. (µsec.) 1 5.50 2 5.00 3 4.50 4 4.00 5 3.50 6 3.00 7 2.50 SFELA10M7GALM-B0 Attenuation (dB) 0 4.00 Frequency (M H z) G .D .T. (µsec.) 1 3.75 2 3.50 3 3.25 4 3.00 5 2.75 6 2.50 7 2.25 SFELA10M7GAXA-B0 Attenuation (dB) 0 3.75 Frequency (M H z) G .D .T. (µsec.) 1 3.50 2 3.25 3 3.00 4 2.75 5 2.50 6 2.25 7 2.00 Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Continued from the preceding page. n Freq. Characteristics SFELA10M7FA0G-B0 Attenuation (dB) 0 5.00 Frequency (M H z) G .D .T. (µsec.) 1 4.50 2 4.00 3 3.50 4 3.00 5 2.50 6 2.00 7 1.50 SFELA10M7GALP03-B0 Attenuation (dB) 0 3.75 Frequency (M H z) G .D .T. (µsec.) 1 3.50 2 3.25 3 3.00 4 2.75 5 2.50 6 2.25 7 2.00 SFELA10M7GAXX-B0 Attenuation (dB) 0 3.25 Frequency (M H z) G .D .T. (µsec.) 1 3.00 2 2.75 3 2.50 4 2.25 5 2.00 6 1.75 7 1.50 SFELA10M7FALL-B0 Attenuation (dB) 0 3.25 Frequency (M H z) G .D .T. (µsec.) 1 3.00 2 2.75 3 2.50 4 2.25 5 2.00 6 1.75 7 1.50 n Spurious Frequency SFELA10M7JAXE-B0 Attenuation (dB) Frequency (M H z) SFELA10M7HA0G-B0 Attenuation (dB) Frequency (M H z) SFELA10M7HAXD-B0 Attenuation (dB) Frequency (M H z) SFELA10M7GA0G-B0 Attenuation (dB) Frequency (M H z) Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Continued from the preceding page. n Spurious Frequency SFELA10M7GALM-B0 Attenuation (dB) Frequency (M H z) SFELA10M7GAXA-B0 Attenuation (dB) Frequency (M H z) SFELA10M7FA0G-B0 Attenuation (dB) Frequency (M H z) SFELA10M7GALP03-B0 Attenuation (dB) Frequency (M H z) SFELA10M7GAXX-B0 Attenuation (dB) Frequency (M H z) SFELA10M7FALL-B0 Attenuation (dB) Frequency (M H z)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers C ER A FILr Three-Elem ents Type SFTLA Series SFTLA10M 7 series for FM -receivers are m onolithic type ceram ic filters w hich use the energy trapped thickness vibration-m ode of the piezoelectric ceram ic. n Features 1. It has an excellent shape factor, and it is possible to obtain 1.5 tim es m ore excellent selectivity than SFELA10M 7 series (by detuning +-300 or 400kH z). 2. G ood perform ance of spurious suppression. 3. H aving the sam e term inal pitch as the SFELA10M 7 series, it easily replaces that series. 4. By replacing tw o SFELA10M 7 series filters w ith one SFTLA10M 7 filter,m ore com pact sets can be m ade. 5. W ell-suited for 1-chip IC s. M A R K I N G (1)(2)(3) 10.0±1.0 5.0±1.03.0±1.0 2.5±0.2 0.5±0.1 0.65±0.1 0.3–0.1 0.4±0.1 2.5±0.2 6.0±1.0 1.4±0.1 E I A J C O D E in m m (1) : Input (2) : G round (3) : O utput SFTLA10M7HA00-B0 M A R K I N G (1)(2)(3) 10.0±1.0 5.0±1.03.0±1.0 2.5±0.2 0.5±0.1 0.65±0.1 0.3–0.1 0.4±0.1 2.5±0.2 6.0±1.0 1.4±0.1 E I A J C O D E in m m (1) : Input (2) : G round (3) : O utput SFTLA10M7GA00-B0 M A R K I N G (1)(2)(3) 10.0±1.0 5.0±1.03.0±1.0 2.5±0.2 0.5±0.1 0.65±0.1 0.3–0.1 0.4±0.1 2.5±0.2 6.0±1.0 1.4±0.1 E I A J C O D E in m m (1) : Input (2) : G round (3) : O utput SFTLA10M7FA00-B0 Part Number Center Frequency (fo) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Spurious Attenuation (dB) Area of Attenuation : [w ithin 40dB] Area of Spurious Attenuation : [w ithin 9M H z to 12M H z] C enter frequency(fo) defined by the center of 3dB bandw idth.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz–30kHz 10.67MHz–30kHz 10.70MHz–30kHz 10.73MHz–30kHz 10.76MHz–30kHz 25kHz Step 10.650MHz–25kHz 10.675MHz–25kHz 10.700MHz–25kHz 10.725MHz–25kHz 10.750MHz–25kHz Combination A,B,C,D,E Combination A,B,C n Frequency Characteristics SFTLA10M7HA00-B0 Attenuation (dB) 0 8.00 Frequency (M H z) G .D .T. (µsec.) 1 7.50 2 7.00 3 6.50 4 6.00 5 5.50 6 5.00 7 4.50 SFTLA10M7GA00-B0 Attenuation (dB) 0 7.00 Frequency (M H z) G .D .T. (µsec.) 1 6.50 2 6.00 3 5.50 4 5.00 5 4.50 6 4.00 7 3.50 SFTLA10M7FA00-B0 Attenuation (dB) 0 6.00 Frequency (M H z) G .D .T. (µsec.) 1 5.50 2 5.00 3 4.50 4 4.00 5 3.50 6 3.00 7 2.50 n Frequency Characteristics (Spurious) SFTLA10M7HA00-B0 Attenuation (dB) Frequency (M H z) SFTLA10M7GA00-B0 Attenuation (dB) Frequency (M H z) Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Continued from the preceding page. n Frequency Characteristics (Spurious) SFTLA10M7FA00-B0 Attenuation (dB) Frequency (M H z)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Lead Type C ER A FILr Test C ircuit and C haracteristics D ata n Test Circuit (1) (2) (3) C S.S.G R FR g R 1 R 2 R g + R 1 = R 2 = 330Ω C = 10pF (Including stray capacitance and input capacitance of R F voltm eter.) Voltm eter (1) : Input (2) : O utput (3) :G round n Temperature Characteristics Y20Y40 Y20 W20 W40

0 W20

Tem perature (˚C ) W40 W60 W80 C enter frequency Y20Y2 Tem perature (˚C ) W40 W60 W80 Insertion loss Y20Y40 Y20 W20 W40 Tem perature (˚C ) W40 W60 W80 3dB Band w idth SFELA10M 7G A00-B0 Variation (kH z)Variation (dB)Variation (kH z) Y20Y40 Y20 W20 W40

0 W20 W40 W60 W80

Tem perature (˚C ) C enter frequency Tem perature (˚C ) Insertion loss Tem perature (˚C ) 3dB Band w idth SFELA10M 7H A00-B0 Variation (kH z)Variation (dB)Variation (kH z) n Matching Conditions

W hen using ceram ic filters, it is m ost im portant to m atch the input/output load to im pedance 330 ohm (only SFELA10M 7D F00-B0 is 470 ohm m atching). W aveform sym m etry is dam aged w hen reactance is added to the input/output load.
Tw o ceram ic filters directly connected can be used for high selelctivity. For reducing w aveform variation, it is recom m ended to input a buffer AM P betw een ceram ic filters.
The SFELA10M 7 and SFTLA10M 7 series are of input/output sym m etric structure so that in theory there is no input/output directionality. Actual circuits m ay use different input/output loading conditions (for exam ple, m ism atched im pedance) or capacitance load. In such cases, the w aveform w ill be a little changed by the direction of the input/output of the ceram ic filters.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Lead Type C ER A FILr C haracteristics D ata and N otice n Loaded Resistance and Waveform (Rg+R1=330ohm) SFELA10M7GA00-B0 0 1.2 1.0 0.8 0.6 0.4 0.2 0 1.2 1.0 0.8 0.6 0.4 0.2 0 1.2 1.0 0.8 0.6 0.4 0.2 0 1.2 1.0 0.8 0.6 0.4 0.2 R2=220Ω R2=330Ω R2=560Ω R2=1kΩ Attenuation (dB)Attenuation (dB) Attenuation (dB)Attenuation (dB) Frequency (M H z) Frequency (M H z) Frequency (M H z) Frequency (M H z) G roup D elay Tim e (µsec.)G roup D elay Tim e (µsec.) G roup D elay Tim e (µsec.)G roup D elay Tim e (µsec.) n Loaded Capacitance and Waveform (Rg+R1=R2=330ohm) SFELA10M7GA00-B0 0 1.2 1.0 0.8 0.6 0.4 0.2 0 1.2 1.0 0.8 0.6 0.4 0.2 0 1.2 1.0 0.8 0.6 0.4 0.2 0 1.2 1.0 0.8 0.6 0.4 0.2 C=10pF C=33pF C=56pF C=82pF Attenuation (dB)Attenuation (dB) Attenuation (dB)Attenuation (dB) Frequency (M H z) Frequency (M H z) Frequency (M H z) Frequency (M H z) G roup D elay Tim e (µsec.)G roup D elay Tim e (µsec.) G roup D elay Tim e (µsec.)G roup D elay Tim e (µsec.) n Notice (Soldering and Mounting) The com ponent cannot be w ithstand w ashing. n Notice (Handling) 1. D o not use this product w ith bend. The com ponent m ay be dam aged if excess m echanical stress is applied to it m ounted on the printed circuit board. 2. The com ponent m ay be dam aged w hen an excess stress w ill be applied. 3. All kinds of re-flow soldering m ust not be applied on the com ponent. 4. D o not clean or w ash the com ponent as it is not herm etically sealed. 5. D o not use strong acidity flux, m ore than 0.2w t% chlorine content, in flow soldering. 6. In case of covering discrim inator w ith over coat, conditions such as m aterial of resin, cure tem perature, and so on should be evaluated w ell. 7. Accurate test circuit values are required to m easure electrical characteristics. It m ay be a cause of m is-correlation if there is any deviation, especially stray capacitance, from the test circuit in the specification.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers D iscrim inators C hip Type C D A C V Series C D AC V10M 7 series form s a resonator on a piezoelectric ceram ic substrate. In com bination w ith IC s, this type obtains stable dem odulation characteristics in w ide bandw idths. n Features 1. C om pact and excellent m echanical strength. 2. C an be com bined w ith various IC s. The IC is determ ined by the last num ber in the part num ber. 3. Stable dem odulation characteristics can be obtained w ithout adjustm ent. 4. The M G type for w ide bandw idths and the M C type for narrow bandw idths are available. 5. Stable tem perature characteristics. 6. W e recom m end kits : ceram ic discrim inator C D AC V10M 7 series and "C ER AFIL" SFEC V10M 7 of the sam e frequency rank. 3.4–0.5 2.6–0.3 0.9–0.3 0.9–0.3 1.5–0.3 : EIAJ M onthly C ode : R ank in m m ∗ ∗∗ Part Number Center Frequency (fo) (MHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output (mV) Distortion (%) IC Detection Method C D A C V10M 7G A 016-R 0 10.700 –30kHz 300 min. within60 to 90mV 0.9 max. TA8122F Quadrature n Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz–30kHz 10.67MHz–30kHz 10.70MHz–30kHz 10.73MHz–30kHz 10.76MHz–30kHz 25kHz Step 10.650MHz–25kHz 10.675MHz–25kHz 10.700MHz–25kHz 10.725MHz–25kHz 10.750MHz–25kHz Combination A,B,C,D,E Combination A,B,C n Standard Land Pattern Dimensions 1.5 2.6 1.51.4 1.4 1.5

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n CDACV10M7GA001-R0 Test Circuit 100k Fg=50 C D ALA10M 7G A001 1µ0.01µ280 AFC C X20029 Vcc=+3.0V U nit R : Ω C : F S.S.G . R EF AF O U TPU T+ – 5 33 289 39 32 Frequency Characteristics Frequency (M H z) 0.1 100 100 1000 R ecovered AF O utput Voltage (m V) D istortion (% ) D istortion AF O utput Input Level M od. Freq. Freq.D ev. 100dBµ 1000H z –22.5kH z Input signal conditions n CDACV10M7GA016-R0 Test Circuit2.5µ 0.1µ 0.033µ0.022µ 0.022µ 22µ270 24k 330p VC C +3V D C O ut AF O ut C D AC V10M 7G A016 SFELA10M 7D F00IF in TA8122F (TO SH IBA) 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 U nit R : Ω C : F Frequency Characteristics Frequency (M H z) 0.1 100 100 1000 R ecovered AF O utput Voltage (m V) D istortion (% ) D istortion AF O utput Input Level M od. Freq. Freq.D ev. 80dBµ 1000H z –22.5kH z Input signal conditions n CDACV10M7GA046-R0 Test Circuit 24 1314151617181920212223 1 12111098765432 LA1832 (SAN YO ) AFC IF-IN 300 0.047µ 0.047µ 100µ 10µ 2.2µ 270 R EG C D ALA10M 7G A046 Vcc (5V) AF O U T U nit R : Ω C : F 0.01µ 0.01µ C SBLA456KE2ZF15 1200p0.047µ5.6k 6.8k +3.3µ 22µ Frequency Characteristics Frequency (M H z) 0.1 100 100 1000 R ecovered AF O utput Voltage (m V) D istortion (% )D istortion AF O utput Input Level M od. Freq. Freq.D ev. 112dBµ 1000H z –75kH z Input signal conditions Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Continued from the preceding page. n CDACV10M7GA069-R0 Test Circuit C XA1538N 10µ 0.022µ 0.01µ 0.01µ 0.01µ 100 µ 33µ 4.7µ 0.022µ 3.3µ 0.01µ 10µ2.2k 3.3k 3.3k 100 VC C (3V) 141241 30 2526272829 + + + ++ + + C D AC V10M 7G Z069-B0 AF O U T VC C (3V) AFC R eg 22 21 20 18192324 17 32 5 6 87 9 10 IF IN 11 1513 U nit R : Ω C : F Frequency Characteristics 0.1 100 100 1000 Frequency (M H z) AF O utput D istortion D istortion (% ) Input signal conditions Input Level 100dBµ M od.Freq. 1000H z Freq.D ev. ±75kH z R ecovered AF O utput Voltage (m V) n CDACV10M7CA001-R0 Test Circuit C X20091 (SO N Y) IN PU TAFC O U T R EG O U T AF O U TVcc 3V S.S.G .(R g=50) +4.7µ + 10µ 0.01µ 1000p 100 0.022µ 280 0.01µ C D AC V10M 7C Z001-B0 +4.7µ + 10µ+ 100µ 28 27 26 25 24 23 22 21 20 19 18 17 16 15 2 3 4 5 6 7 8 9 10 11 12 13 141 U nit R : Ω C : F Frequency Characteristics 0.1 100 1000 Frequency (M H z) AF O utput D istortion D istortion (% ) Input signal conditions Input Level 100dBµ M od.Freq. 1000H z Freq.D ev. ±22.5kH z R ecovered AF O utput Voltage (m V)

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 C hip Type D iscrim inators C D A C V Series N otice n Notice (soldering and mounting) 1. Standard Reflow Soldering Condition (1) R eflow The com ponent cannot be w ithstand w ashing. 2. Wash Lead term inal is directly contacted w ith the tip of soldering iron of 280±5˚C for 3.0±0.5 seconds. (2) Soldering Iron Tem perature (˚C ) G radual C ooling 240 230 150 60 30 Tim e (sec.) 5sec. n Notice (handling) 1. The com ponent m ay be dam aged if excess m echanical stress is applied to it m ounted on the printed circuit board. 2. D esign layout of com ponents on the PC board to m inim ize the stress im posed on the w arp or flexure of the board. 3. After installing chips, if solder is excessively applied to the circuit board, m echanical stress w ill cause destruction resistance characteristics to low er. To prevent this, be extrem ely careful in determ ining shape and dim ension before designing the circuit board diagram . 4. W hen the positioning claw s and pick up nozzle are w orn, the load is applied to the chip w hile positioning is concentrated to one positioning accuracy, etc. C areful checking and m aintenance are necessary to prevent unexpected trouble. 5. W hen correcting chips w ith a soldering iron, the tip of the soldering iron should not directly touch the chip com ponent. D epending on the soldering conditions, the effective area of term inations m ay be reduced. the use of solder containing Ag should be done to prevent the electrode erosion. 6. D o not clean or w ash the com ponent as it is not herm etically sealed. 7. In case of covering discrim inator w ith over coat, conditions such as m aterial of resin, cure tem perature, and so on should be evaluated w ell. 8. Accurate test circuit values are required to m easure electrical characteristics. It m ay be a cause of m is-correlation if there is any deviation, especially stray capacitance, from the test circuit in the specification. [C om ponent direction] [C om ponent layout close to board] Put the com ponent lateral to the direction in w hich stress acts. Susceptibility to stress is in the order of : A>C >B B A CSlit P erforation

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers D iscrim inators C hip Low -profile Type C D SC A Series C D SC A10M 7 series form s a resonator on a piezo electric ceram ic sabstrate. In com bination w ith IC s, this type obtains stable dem oduration characteristics in w ide bandw idth. n Features 1. C om pact and high reliability and recom m ended for autom otive applications. 2. C an be com bined w ith various IC s. The IC is determ ined by the last num ber in the part num ber. 3. Stable dem oduration characteristics can be obtained w ithout adjustm ent. 4. Stable tem perature characteristics. 5. R ecom m ended for Pb free soldering. 4.1m ax 1.2m ax 4.5±0.1 0.2±0.2 2.0±0.1 0.3±0.2 0.4(ref.) 0.4(ref.) 1.4m ax 0.4±0.05 1.5±0.1 0.8±0.10.8±0.1 1.5±0.1 (in m m ) Part Number Center Frequency (fo) (MHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output (mV) Distortion (%) IC Detection Method (fn) m eans nom inal center frequency. n Standard Land Pattern Dimensions 2.6 1.0 2.0 1.0 3.0 (in m m )

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n Test Circuit 4 5 6 7 8 9321 21 20 19 18 17 16 15 14 13 10 11 12 222324 TA31272F S.S.G . X: C D SC A10M 7G F107-B0 R : 1.2 [kohm ] C : open X R C 0.01µF 0.1µF 0.01µF AF O U TVcc (5.0V) 0.1µF 0.01µF 1000pF 0.01µF 0.01µF n Frequency Characteristics R ecovered AF O utput Voltage (m V) D istortion (% ) Frequency (M H z) 100 1000 0.1 100 AF O utput D istortion Input Level M od. Freq. Freq.D ev. 100dBµ 1000H z –40kH z Input signal conditions

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 C hip Type D iscrim inators C D SC A Series N otice n Notice (Soldering and Mounting) 1. Standard Reflow Soldering Condition (1) R eflow The com ponent cannot be w ithstand w ashing. 2. Wash Lead term inal is directly contacted w ith the tip of soldering iron of +280–5°C for 3.0 seconds–0.5 seconds. (2) Soldering Iron 5 sec G radual C ooling 150 240 260 6060 Tim e (sec.) Tem perature (°C ) n Notice (Handling) 1. The com ponent m ounted on the PC B m ay be dam aged if excess m echanical stress is applied. 2. Layout the com ponents on the PC B to m inim ize the stress im posed by the w arp or flexure of the board. 3. After installing com ponents, if solder is excessively applied to the circuit board, m echanical stress w ill cause destruction resistance characteristics to be low er. To prevent this, be extrem ely careful in determ ining shape and dim ension before designing the circuit board diagram . 4. W hen the positioning claw or pick up nozzle are w orn, the excess load is applied to the com ponents w hile positioning or placing are perform ed. C areful checking and m aintenance are necessary to prevent unexpected trouble. 5. W hen correcting com ponent's position w ith a soldering iron, the tip of the soldering iron should not directly touch the chip com ponent. D epending on the soldering conditions, the effective area of term inations m ay be reduced. The use of solder containing Ag should be considerd to prevent the electrode erosion. 6. D o not clean or w ash the com ponent as it is not herm etically sealed. 7. In case of overcoating the part, coating conditions such as m aterial, curing tem perature, and so on m ust be evaluated deeply. 8. Accurate test circuit values are required to m easure electrical characteristics. It m ay be a cause of m is-correlation if there is any deviation, especially stray capacitance, from the test circuit in the specification. [C om ponent direction] [C om ponent layout close to board] Put the com ponent laterally to the direction in w hich stress acts. Susceptibility to stress is in the order of : A>C >B B A CSlit P erforation

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers D iscrim inators C D A LA Series C D ALA10M 7 series form s a resonator on a piezoelectric ceram ic substrate. In com bination w ith IC s, this type obtains stable dem odulation characteristics in w ide bandw idths. n Features 1. C om pact and excellent m echanical strength. 2. C an be com bined w ith various IC s. The IC is determ ined by the last num ber in the part num ber. 3. Stable dem odulation characteristics can be obtained w ithout adjustm ent. 4. The M G type for w ide bandw idths and the M C type for narrow bandw idths are available. 5. Stable tem perature characteristics. 6. W e recom m end com bination : ceram ic discrim inator C D ALA10M 7 series and "C ER AFIL" SFELA10M 7 of the sam e frequency rank. Freq. R ank (C olor D ot) 5.0±1.0 8.0±1.0 5.0±1.0 0.4±0.1 3.0±1.0 0.5±0.1 0.3±0.1 0.65±0.1 (in m m ) 5.0±0.2 M A R K I N G E I A J C O D E CDALA10M7G_ Series Freq. R ank (C olor D ot) 5.0±1.0 8.0±1.0 5.0±1.0 0.4±0.1 3.0±1.0 0.5±0.1 0.3±0.1 0.65±0.1 (in m m ) 5.0±0.2 M A R K I N G E I A J C O D E CDALA10M7C_ Series Part Number Center Frequency (fo) (MHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output (mV) Distortion (%) IC Detection Method C D A LA 10M 7G A 016-B 0 10.700 –30kHz 300 min. within60 to 90mV 0.9 max. TA8122F Quadrature C D A LA 10M 7C A 001-B 0 10.700 –30kHz 242 min. 35 min. - CX20091 Quadrature n Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz–30kHz 10.67MHz–30kHz 10.70MHz–30kHz 10.73MHz–30kHz 10.76MHz–30kHz 25kHz Step 10.650MHz–25kHz 10.675MHz–25kHz 10.700MHz–25kHz 10.725MHz–25kHz 10.750MHz–25kHz Combination A,B,C,D,E Combination A,B,C

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 n CDALA10M7GA001-B0 Test Circuit 100k Fg=50 C D ALA10M 7G A001 1µ0.01µ280 AFC C X20029 Vcc=+3.0V U nit R : Ω C : F S.S.G . R EF AF O U TPU T+ – 5 33 289 39 32 Frequency Characteristics 0.1 100 500 Frequency (M H z) Input Level M od. Freq. Freq.D ev. 110dBµ 400H z –22.5kH z Input signal conditions R ecovered AF O utput Voltage (m V) D istortion (% ) D istortion AF O utput n CDALA10M7GA016-B0 Test Circuit2.5µ 0.1µ 0.033µ0.022µ 0.022µ 22µ270 24k 330p VC C +3V D C O ut AF O ut C D AC V10M 7G A016 SFELA10M 7D F00IF in TA8122F (TO SH IBA) 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 U nit R : Ω C : F Frequency Characteristics 0.1 100 500 Frequency (M H z) 80dBµ 1000H z –22.5kH z R ecovered AF O utput Voltage (m V) D istortion (% ) D istortion AF O utput Input Level M od. Freq. Freq.D ev. Input signal conditions n CDALA10M7GA018-B0 Test Circuit 24 23 22 21 20 19 18 17 16 15 14 13 1 2 3 4 5 6 7 8 9 10 11 12 TA8132N (TO SH IBA) 1F in Vcc 3V D C out AF out SFELA10M 7D F00 C D ALA10M 7G A018 0.022µ 0.1µ 24k 270 2.2µ 0.033µ 22µ 0.022µ 330p Vcc 3V U nit R : Ω C : F Frequency Characteristics R ecovered AF O utput Voltage ( m V ) D istortion (% ) Frequency ( M H z ) 100 1000 0.1 100 Input Level 80 dBµ M od. Freq. 1000 H z Freq. D ev. –22.5 kH z D istortion AF O utput Input signal conditions Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Continued from the preceding page. n CDALA10M7GA046-B0 Test Circuit 24 1314151617181920212223 1 12111098765432 LA1832 (SAN YO ) AFC IF-IN 300 0.047µ 0.047µ 100µ 10µ 2.2µ 270 R EG C D ALA10M 7G A046 Vcc (5V) AF O U T U nit R : Ω C : F 0.01µ 0.01µ C SBLA456KE2ZF15 1200p0.047µ5.6k 6.8k +3.3µ 22µ Frequency Characteristics R ecovered AF O utput Voltage ( m V ) D istortion ( % ) Frequency ( M H z ) 100 1000 0.1 100 Input Level 112 dBµ M od. Freq. 1000 H z Freq. D ev. –75 kH z AF O utput D istortion Input signal conditions n CDALA10M7GA048-B0 Test Circuit 3.3µ LA1835 (SAN YO ) VC C (7V) Vt AFC 47n + 15k 300 47n IF-IN 0.047µ 0.047µ 10µ 10µ 10µ 0.47µ 10µ10µ C SBLA456KE2ZF15 33n 1500p 33n R EG . 1k 1k 3k Lch R ch 20k 510 C D ALA10M 7G A048 L. P. F. L. P. F. 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + + + U nit R : Ω C : F Frequency Characteristics 0.1 100 500 Frequency (M H z) R ecovered AF O utput Voltage (m V) Input Level M od. Freq. Freq.D ev. 112dBµ 1000H z –75kH z Input signal conditions D istortion AF O utput D istortion (% ) n CDALA10M7GA092-B0 Test Circuit TA2132P(TO SH IBA) D C O U T AF O U T Vcc(3.0V) IF-IN 4.7µ +4.7µ 0.033µ 20k 270 0.01µ 330p C D ALA10M 7G Z092-B0 2.2µ U nit R : Ω C : F Frequency Characteristics 0.1 100 500 Frequency (M H z) AF O utput D istortion D istortion (% ) Input signal conditions Input Level 80dBµ M od.Freq. 1000H z Freq.D ev. –22.5kH z R ecovered AF O utput Voltage (m V) Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Continued from the preceding page. n CDALA10M7CA001-B0 Test Circuit 100µ 10µ 33µ 10µ 10µ C D ALA10M 7C A001 0.1µ 0.01µ 0.01µ IF in 100 C X20090 (SO N Y) VC C 5V AF O utput AFC R ef. 4.7µ 28 27 26 25 24 23 22 21 20 19 18 17 16 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 U nit R : Ω C : F Frequency Characteristics R ecovered AF O utput Voltage ( m V ) D istortion ( % ) Frequency ( M H z ) 100 1000 0.1 100 Input Level 110 dBµ M od. Freq. 400 H z Freq. D ev. –22.5 kH z AF O utput D istortion Input signal conditions n CDALA10M7CA005A-B0 Test Circuit 20 19 18 17 16 15 14 13 12 11 1 2 3 4 5 6 7 8 9 10 IC : LA 7770 (S A N Y O ) D C Bias +5V D C Bias +5.2V D ATA O U T 0.01µ 470p 470p 0.1µ 0.01µ 0.01µ 0.01µ 0.01µ 33µ 0.022p 1000p 0.1µ 5.6k 20k 10k2k 220p 10k 10k D em od.O U T C D ALA10M 7C A005A Vcc=12V IF IN U nit R : Ω C : F Frequency Characteristics R ecovered AF O utput Voltage ( m V ) D istortion ( % ) Frequency ( M H z ) 100 1000 5000 10.6 10.7 10.8 100 500 Input Level 100 dBµ M od. Freq. 1000 H z Freq. D ev. –75 kH z AF O utput D istortion Input signal conditions n CDALA10M7CA040-B0 Test Circuit 24 23 22 21 20 19 18 17 16 15 14 13 1 2 3 4 5 6 7 8 9 10 11 12 TEA5710 (PH ILIPS) 100µ 0.01µ 0.22µ 10µ 100µ 0.01µ 0.01µ 0.22µ VC C (3V) AF-O U T D C -O U T S.S.G . 280 + + U nit R : Ω C : F Frequency Characteristics R ecovered AF O utput Voltage ( m V ) D istortion (% ) Frequency ( M H z ) 100 1000 0.1 100 10.4 11.0 Input Level 100 dBµ M od. Freq. 1000 H z Freq. D ev. –22.5 kH z AF O utput D istortion Input signal conditions

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Lead Type D iscrim inators N otice n Notice (Soldering and Mounting) The com ponent cannot be w ithstand w ashing. n Notice (Handling) 1. D o not use this product w ith bend. The com ponent m ay be dam aged if excess m echanical stress is applied to it m ounted on the printed circuit board. 2. The com ponent m ay be dam aged w hen an excess stress w ill be applied. 3. All kinds of re-flow soldering m ust not be applied on the com ponent. 4. D o not clean or w ash the com ponent as it is not herm etically sealed. 5. D o not use strong acidity flux, m ore than 0.2w t% chlorine content, in flow soldering. 6. In case of covering discrim inator w ith over coat, conditions such as m aterial of resin, cure tem perature, and so on should be evaluated w ell. 7. Accurate test circuit values are required to m easure electrical characteristics. It m ay be a cause of m is-correlation if there is any deviation, especially stray capacitance, from the test circuit in the specification.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Packaging n Minimum Quantity Part Number Taping ø180mm 2,000 2,000 2,000 Ammo Pack 1,500 1,500 1,000 1,500 1,500 Bulk 500 500 500 500 500 500 SFECV SFECS SFELA SFELB SFVLA SFKLA SFTLA CDACV / CDSCA CDALA n Chip Type CERAFILr SFECV Series 1.7W0.1 Y0.05 12.0+0.08 -0.2 0.3T0.05 7.3T0.01 5.5T0.05 1.75 T0.1 1.9T0.1 10 max. Peeling strengh (0.1Y0.7N) Cover Tape Part number marked side is always facing upside. The feeding holes side of cavity tape is always input terminal.User Direction of Feed 3.0T0.1 4.0T0.1 φ1.5W0.1 3 max. Chip Filter n Small Chip Type CERAFILr SFECS Series Chip Filter φ1.55T0.05 40T0.15 10 pitch accumulated User direction of feed Cover film Peeling strength 0.1~0.7N 0.3T0.05 2.02T0.1 0.053˚max.10˚ max. (in mm) 5.5T0.05 4.3 4.0T0.1 2.0T0.05 4.0T0.1 3.45 3.35T0.1 12.0T0.2

Part Number marked side is always facing upside.
The feeding holes side of cavity tape is always input terminal. n Chip Type Discriminator CDACV Series 1.7W0.1 Y0.05 12.0T0.2 0.3T0.05 0.3T0.01 5.5T0.5 1.75 T0.1 1.9T0.13 max. 10 max. Peeling strengh (0.1Y0.7N) Cover Tape Part number marked side is always facing upside. User Direction of Feed 3.0T0.1 4.0T0.1 φ1.5W0.1 12.0T0.2 3.8T0.1 1.75T0.1 φ1.5W0.1 n Chip Type Low-Profile Type Discriminator CDSCA Series (in mm) 4.0–0.1 Cover Film 4.0–0.1 2.0–0.05 12.0–0.2 (9.5) Ø1.5 +0.1 Ø1.5 +0.1 5.5–0.05 1.75 –0.1 4.7–0.1 Direction of FeedPart Number marked side is always facing upside 0.3–0.05 (1.85max.) 1.25–0.05 3˚max. 2.2–0.1The cover film peel strength force 0.1~0.7N 10˚ Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Packaging Continued from the preceding page. n Lead Type CERAFILr SF_LA Series (in m m ) Lead Length under the H old D ow n Tape Length of C at off Pitch of C om ponents Pitch of Sprocket H ole (1) Length from H ole C enter to Lead Length from H ole C enter to C om ponent C enter Pitch of the Term inal (1) Pitch of the Term inal (2) Slant to the Forw ard or B ackw ard Slant to the Left or R ight W idth of C arrier Tape W idth of H old D ow n Tape Position of Sprocket H ole G ap of H old D ow n Tape and C arrier Tape D istance B etw een the C enter of Sprocket H ole and Lead Stpper D iam eter of Sprocket H ole Total Tape Thickness Pitch of Sprocket H ole (2) Item C ode D im ensions Tolerance R em arks P F ∆S1 W W 0 W 1 W 2 H 0 D 0 t P020 3.0 m in. 2.0 m ax. 12.7 12.7 3.85 6.35 5.0 2.5 18.0 6.0 m in. 9.0 18.0 ø4.0 0.6 254.0 To distinguish the direction M ust not protrude to the carrier tape The pitch of 20 sprocket holes –0.5 –0.2 –0.5 –0.5 –0.2 –1.0 –1.0 –0.5 –0.5 –0.5 –0.2 –0.2 –1.5 +0.5–0.2 +0.5–0 P2 P F F1 F1 W W 0 W 1 H 0 W 2 D 0 t ∆S1 ∆h ∆h Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Packaging Continued from the preceding page. n Lead Type Discriminator CDALA Series (in m m ) H old dow n tape doesn't exceed the carrier tape The pitch of 20 sprocket holes P2 P F W W 0 W 1 H 0 W 2 D 0 t ∆S1 Item Code Dimensions Tolerance Remarks Lead length under the hole down tape Pitch of component Pitch of sprocket hole (1) Length from hole center to lead Length from hole center to component center Lead spacing Slant to the forward or backward Slant to the left or right Width of carrier tape Width of hold down tape Position of sprocket hole Diameter of sprocket hole Total tape thickness Pitch of sprocket hole (2) P F ∆S1 W W 0 W 1 W 2 H 0 D 0 t Po20 3.0 m in. 12.7 12.7 3.85 6.35 5.0 18.0 6.0 m in. 9.0 18.0 ø4.0 0.6 254.0 — — — –0.5 –0.2 –0.5 –0.5 –1.0 –1.0 –0.5 — — — –0.5 –0.5 –0.2 –0.2 –1.5 +0.5 -0.0 +0.5 -0.2 ∆h ∆h Gap of hold down tape and Carrier tape Distance between the center of sprocket hole and lead stopper

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 C D A LA 10M 7G A 001 C D A LA 10M 7G A 002 C D A LA 10M 7G A 004 C D A LA 10M 7G A 005 C D A LA 10M 7G A 006 C D A LA 10M 7G A 007 C D A LA 10M 7G A 008 C D A LA 10M 7G A 009 C D A LA 10M 7G A 011 C D A LA 10M 7G A 012 C D A LA 10M 7G A 013 C D A LA 10M 7G A 014A C D A LA 10M 7G A 015 C D A LA 10M 7G A 016 C D A LA 10M 7G A 017 C D A LA 10M 7G A 018 C D A LA 10M 7G A 019 C D A LA 10M 7G A 020 C D A LA 10M 7G F021A C D A LA 10M 7G A 022 C D A LA 10M 7G A 023 C D A LA 10M 7G F024 C D A LA 10M 7G A 025 C D A LA 10M 7G A 026 C D A LA 10M 7G A 027 C D A LA 10M 7G A 027N C D A LA 10M 7G A 028 C D A LA 10M 7G A 029 C D A LA 10M 7G A 030 C D A LA 10M 7G A 031 C D A LA 10M 7G A 032 C D A LA 10M 7G A 033 C D A LA 10M 7G A 034V C D A LA 10M 7G A 035 C D A LA 10M 7G A 036 C D A LA 10M 7G A 037 C D A LA 10M 7G A 038 C D A LA 10M 7G A 039 C D A LA 10M 7G A 040 C D A LA 10M 7G A 041 C D A LA 10M 7G A 042 C D A LA 10M 7G A 043 C D A LA 10M 7G A 044 C D A LA 10M 7G A 045 C D A LA 10M 7G A 046 C D A LA 10M 7G A 047 C D A LA 10M 7G A 048 C D A LA 10M 7G A 049 C D A LA 10M 7G A 050 C D A LA 10M 7G A 051 C D A LA 10M 7G A 052 C D A LA 10M 7G A 053 C D A LA 10M 7G A 054 C D A LA 10M 7G A 055 C D A LA 10M 7G A 056 C D A LA 10M 7G A 057 C D A LA 10M 7G A 058 C D A LA 10M 7G A 059 C D A LA 10M 7G A 060 C D A LA 10M 7G A 061 Part Number IC Manufacturer IC Sony Sony R ohm R ohm Toshiba Sanyo Toshiba Toshiba Panasonic Sony Panasonic Panasonic Sanyo Toshiba Philips Toshiba R ohm Philips Philips Sanyo Sanyo Philips Telefunken Sanyo Sony Sony Telefunken Philips Philips Toshiba Sony Toshiba Telefunken Philips Toshiba Sanyo Siem ens Toshiba Philips R ohm Philips Sanyo Siem ens Toshiba Sanyo Philips Sanyo M otorola Toshiba Siem ens M otorola Panasonic Sony Philips N EC Toshiba Toshiba Sam sung R ohm Philips C X20029 C X20076 BA4234L BA4230AF TA7640AP LA1260 TA7303P TA7130P AN 7004 C XA1030P AN 7007SU AN 7006S LA1816 TA8122AN /F TEA5591 TA8132AN /AF BA1440 N E604 TBA229-2 LA1810 LA7770 TD A2557 U 829B LA1805 C XA1238 C XA1238N U 2501B TBA120U TEA5592 TA2003 C XA1343M TA2007N U 4490B TEA5594 TA2029 LA1830 TD A6160X TA8186 TEA5710 BA4220 SA605 LA1831 TD A6160-2X TA2008A/AN LA1832/M SA626 LA1835/M M C 13156 TA2022 TD A1576T M C 13173 AN 7232 C XA1376AM TEA5712T µPC 1391M TA2057 TA2046 KA2244 BA1448 TEA5762/5757 C D A LA 10M 7G F062 C D A LA 10M 7G A 063 C D A LA 10M 7G A 064 C D A LA 10M 7G A 065 C D A LA 10M 7G A 066 C D A LA 10M 7G A 067 C D A LA 10M 7G A 068 C D A LA 10M 7G A 069 C D A LA 10M 7G A 070 C D A LA 10M 7G A 071 C D A LA 10M 7G F072 C D A LA 10M 7G A 073 C D A LA 10M 7G A 075 C D A LA 10M 7G A 076 C D A LA 10M 7G A 077 C D A LA 10M 7G A 078 C D A LA 10M 7G A 079 C D A LA 10M 7G A 080 C D A LA 10M 7G A 080A C D A LA 10M 7G A 081 C D A LA 10M 7G A 082 C D A LA 10M 7G A 083 C D A LA 10M 7G A 084 C D A LA 10M 7G A 085 C D A LA 10M 7G A 086 C D A LA 10M 7G A 087 C D A LA 10M 7G A 088 C D A LA 10M 7G A 089 C D A LA 10M 7G A 090 C D A LA 10M 7G A 091 C D A LA 10M 7G A 092 C D A LA 10M 7G A 092D C D A LA 10M 7G A 093 C D A LA 10M 7G A 094 C D A LA 10M 7G A 095 C D A LA 10M 7G A 096 C D A LA 10M 7G A 097 C D A LA 10M 7G A 098 C D A LA 10M 7G A 100 C D A LA 10M 7G A 100A C D A LA 10M 7G A 101 C D A LA 10M 7G A 102 C D A LA 10M 7G A 103 C D A LA 10M 7G A 104 C D A LA 10M 7G A 105A C D A LA 10M 7G A 106 C D A LA 10M 7G F107 C D A LA 10M 7G F108A C D A LA 10M 7G F109 C D A LA 10M 7G A 110 C D A LA 10M 7C A 001 C D A LA 10M 7C A 002 C D A LA 10M 7C A 004A C D A LA 10M 7C A 005A C D A LA 10M 7C A 006 C D A LA 10M 7C A 009 C D A LA 10M 7C A 040 Part Number IC Manufacturer IC Part Number IC Manufacturer Toko Sam sung Sam sung Sam sung R ohm R ohm Sony Sony Sanyo Toshiba Toshiba M otorola Sony Sony Toshiba Sony Sanyo Toshiba Toshiba Telefunken Toshiba Sanyo R ohm Philips Sanyo M otorola Toshiba Sam sung Sam sung Sam sung Toshiba Toshiba Sony Sanyo Tem ic Philips M atsushita Philips Toshiba Toshiba Sanyo Toshiba Sam sung R fm d Philips Fujitsu Toshiba Sanyo Toko D spg Sony Toshiba M otorola Sanyo Philips Toshiba Philips TK14581 KA2292 KA2295 KA2298 BA4110 BA4240L C XA1991N C XA1538M /N /S LA1150 TA7765 TA31161 M C 13158 C XA1611 C XA3067M TA2111 C X1691M LA1838/M TA2104AFN TA2104F U 4313B TA2099N LA1827 BH 4126FV SA639 LA1833 M C 3363 TA8721ASN KA22425 KA22901 KA2297 TA2132 TA2132BP C XA1111 LA1822 U 2765B SA636D K AN 6138SH C AA3220TS TA2149N TA2149AN LA1823 TA2142FN KB22902 R F2925 TEA5757H L M B15G 611 TA31272FN LA1225M TK14588 D S9R F21 C X20091 TA7687P/F M C 3356P LA7770 TEA5591 TA7640AP TEA5710 IC Test C ircuit of C eram ic D iscrim inator

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Exam ple of A ppllied C ircuit n LA1140(Automotive Radio) 4 105 146 12 9 11 13 AFC LA1140 (SAN YO ) SFELA10M 7H AA0-B0 SFELA10M 7H AA0-B0 C .F. AG C C .F. 0.047 x 2 Vref. + C 9 0.047 C 10 4.7µ R 13 12k R 14 C 11 33p C 8 0.047 C 7 0.047 L1 2.2µH R 7 200 R 8 330 R 3R 2 R 6 330 R 9 220k R 2 47k R 12 C 14 0.047 C 3 0.047 C 2 0.022 C 1 0.022 R 1 100 R 2 R 4 10k C 13 33p 22k R 10 C 15 0.047 C 6 C 5C 4 VR 1 150k 1.8k1.8k 2.2µ FR O N T EN D n CXA1019M(Radio) R FM PF FM O SC W W W W W W W W 1917678 14 2 25 26 13 3244212322 R IPPLE FILTER R EG U LATO RTU N IN G M ETER VO L C XA1019M (SO N Y) FM IF AM P D ETEC TO R AF PR E/PO W ER AM P AM IF AM P D ETEC TO R FM FR O N T EN D AM FR O N T EN D FM BPF M ETER AM IF IN Vcc SP AF IN VO L AM O SC AM AN T D EP O U T FM /AM BAN D SELEC T R EG O U T FM D ISC R I FM IF IN FM C ER AFIL® (SFELA10M 7FA00-B0) C ER AM IC D ISC R IM IN ATO R (C D ALA10M 7C A001-B0) IF O U T AM C ER AFIL® (SFU LA455KU 2B-B0) 20 161811 5 N o adjustm ent is needed the FM detection stage due to use the ceram ic discrim inator. Continued on the following page.

Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Exam ple of A ppllied C ircuit Continued from the preceding page. n TA8122F(Radio) 20p 22p 330p 33k 22k 100k IS2236 C SBLA456KE2ZF16-B0 C D ALA 10M 7G A16-B0 SFELA10M 7FA00-B0SFU LA455KU 2B-B0 TA8122F(TO SH IBA) 100k L1 T1L2 15p LPF1 M O AM FMST LPF2 VC O L W W W W WFM PFAM PF FM O SC AM O SC D EF O U T M PX IN O U T L O U T R Q U ADST LEDW TU N LED FM IF IN AM IF IN AM AG C FM R F IN AM M IX FM M IX G N D 2Vcc2G N D 1 O U T IN Vcc1 10µF 0.022µF 0.1µ 4.7µ 4.7µ 0.068µ 0.015µ 0.033µ 33µ 10µH 0.015µ 0.1µ 22µ 0.022µ 560 560 24 23 22 20 19 18 17 16 15 14 13 654321 7 8 9 10 11 12 R Vcc W (3V) ST D EC O D ER Phase C O M Phase C O M VC O Freq D ivider H YX SW ST LED TU N LED L D ET FM D ETFM IF AF PR E FM D ET AM AG C AM M IX AM M IX FM O SC AM O SC AM /FM M O N O SW AM IFFM R F AM R F BPF D etection and M PX stage adjustm ent ceram ic discrim inator and ceram ic resonator (C ER ALO C K® )

2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone:81-75-951-9111 International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone:81-3-5469-6123 Fax:81-3-5469-6155 E-mail:intl@murata.co.jp http://www.murata.co.jp/products/ Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Note: 1. Export Control <For customers outside Japan> Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. <For customers in Japan> For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. 2. Please contact our sales representatives or product engineers before using our products listed in this catalog for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property, or when intending to use one of our products for other applications than specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above 3. Product specifications in this catalog are as of May 2001. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before your ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. 5. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or third party's intellectual property rights and other related rights in consideration of your using our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 6. None of ozone depleting substances (ODS) under the Montreal Protocol is used in manufacturing process of us.

Product Information