SF2434E MURATA1 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved September 2016 SF2434E (R) 10/25/18 Page 1 of 4 www.murata.com
- Designed for Front-end GPS Applications
- Low Insertion Loss
- 3.0 x 3.0 x 1.3 mm Surface-mount Case
- No Matching Circuit Required Maximum Ratings at +25 °C Unless Stated Otherwise Rating Value Units Maximum Input Power Level +10 dBm DC Voltage 3 Volts Specification Temperature Range -40 to +105 °C Operable Temperature Range -45 to +125 °C Storage Temperature Range -40 to +85 °C SM3030-6
1223 MHz
- Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board without imped - ance matching and measured with 50 network analyzer. 2. The design, manufacturing process, and specifications of this filter are subject to change. 3. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 4. US and international patents may apply. 6. Tape and Reel Standard Per ANSI/EIA 481.
Electrical Characteristics
Characteristic Sym Notes Min Typ Max Units Center Frequency Fc 1 1223 MHz Maximum Insertion Loss (1196 to 1250 MHz) IL 4.0 5.0 dBAmplitude Ripple (1196 to 1250 MHz) 1.4 2.0 Group Delay Ripple (1196 to 1250 MHz) 8 15 ns (1226.577 to 1228.623 MHz) 1.0 5 (1196.91 to 1217.37 MHz) 3.0 5 (1242.426 to 1249.886 MHz) 2.0 5 Attenuation Referenced to 0 dB: dB1051 - 1151 MHz 15 20 1304 - 1354 MHz 15 28 Temperature Coefficient of Frequency -36 ppmk Lid Symbolization (Y=year, WW=week, S=shift), dot = Pin 1 Indicator 8Q, YWWS Pin # Description Pin # Description
1 Ground 4 Ground
2 Input 5 Output
3 Ground 6 Ground
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: SF2368EΩ ΩSF2434E AEC-Q200 RoHS Compliance This component is compliant with RoHS directive. This component was always RoHS compliant from the first date of manufacture.
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved September 2016 SF2434E (R) 10/25/18 Page 2 of 4 www.murata.com Frequency Characteristics
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved September 2016 SF2434E (R) 10/25/18 Page 3 of 4 www.murata.com SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint PCB Land Pattern Top View Case and PCB Footprint Dimensions Dimension mm Inches Min Nom Max Min Nom Max K 3.20 0.126 L 1.70 0.067 M 1.05 0.041 N 0.81 0.032 O 0.38 0.015 Case Materials Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free A BC D J EF GH I TOP VIEW BOTTOM VIEW YWWS /G4B /G4B /G4F /G4D /G4D /G4E /G4E /G4E /G4C
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved September 2016 SF2434E (R) 10/25/18 Page 4 of 4 www.murata.com Tape and Reel Specifications “B” Quantity Per ReelInches millimeters 7 178 500 13 330 3000 USER DIRECTION OF FEED COMPONENT ORIENTATION See Detail "A" 13.0 20.22.0 12.0 100 REF. "B" R EF. PIN #1