SF2415E-1 MURATA1 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2016 SF2415E-1 (R) 1/23/19 Page 1 of 5 www.murata.com Electrical Connections Characteristic Sym Notes Min Typ Max Units Center Frequency fC 869.00 MHz Insertion Loss, 868 to 870 MHz IL 3.0 4.5 dB Amplitude Ripple, 868 to 870 MHz 0.5 1.6 dBP-P VSWR, 868 to 870 MHz 1.5 2.5 Attenuation Referenced to 0dB dB 50 to 791 MHz 43 63 791 to 835 MHz 41 57 835 to 848 MHz 39 52 848 to 862 MHz 18 40 880 to 883 MHz 12 28 883 to 1000 MHz 38 50 Source Impedance ZS 50 Load Impedance ZL 50 Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization, Y=year, WW=week, S=shift, Dot=pin 1 indicator A1, YWWS Standard Reel Quantity Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Connection Terminals Port 1 (Input) 2 Port 2 (Output) 5 Case Ground All others SM3030-6
- Low Loss Filter for ISM Band A1 Maximum Ratings Rating Value Units Input Power Level 20 dBm DC Voltage 6 V Operable Temperature Range -45 to +125 °C Storage Temperature Range in Tape and Reel -40 to +85 °C Specification Temperature Range -40 to +80 °C Soldering Profile Maximum Temperature, 5 cycles/10 s maximum 265 °C
869.00 MHz
- Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. The design, manufacturing process, and specifications of this filter are subject to change. 5. US and international patents may apply. CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Test Circuit SAW 2 5 1, 3, 4, 6 50Ω 50Ω AEC-Q200 RoHS Compliance This component is compliant with RoHS directive. This component was always RoHS compliant from the first date of manufacture.
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2016 SF2415E-1 (R) 1/23/19 Page 2 of 5 www.murata.com Frequency Characteristics S21 response: (Span 200 MHz) S21 response: (Span 20 MHz)
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2016 SF2415E-1 (R) 1/23/19 Page 3 of 5 www.murata.com Frequency Characteristics S21 response: (Span 3 GHz) S11/S22 response:
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2016 SF2415E-1 (R) 1/23/19 Page 4 of 5 www.murata.com 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint SM3030-6 Case PCB Footprint Top View /G4B /G4B /G4F /G4D /G4D /G4E /G4E /G4E /G4C Case and PCB Footprint Dimensions Case Materials Electrical Connections Dimension mm Inches Min Nom Max Min Nom Max Materials Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free Connection Terminals Input 2 Output 5 Case Ground All others YWWS Q P Q R TOP VIEW BOTTOM YWWS
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2016 SF2415E-1 (R) 1/23/19 Page 5 of 5 www.murata.com Tape and Reel Specifications “B” Quantity Per ReelInches millimeters 7 178 500 13 330 3000 See Detail "A" 13.0 20.22.0 12.0 100 R EF. "B" REF. COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 3.3 mm Bo 3.3 mm Ko 1.4 mm Pitch 4.0 mm W 12.0 mm