DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2016 SF2412E 2/9/18 Page 1 of 4 www.murata.com
Electrical Characteristics
Characteristic Sym Notes Min Typ Max Units Center Frequency fC 1 925 MHz Insertion Loss 922 to 928 MHz IL 2.6 3.8 dB Amplitude Ripple 922 to 928 MHz 0.7 2.0 Insertion Loss, (920 to 930 MHz) IL 3.2 4.6 Amplitude Ripple, (920 to 930 MHz) 0.7 2.0 Attenuation, Referenced from 0 dB: 775 to 835 MHz 40 46 dB 835 to 895 MHz 36 45 945 to 960 MHz 24 34 970 to 992 MHz 36 46 992 to 1075 MHz 38 44 Source Impedance Z S 50 Load Impedance ZL 50 Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator 7V, YWWS Connection Terminals Input 2 Output 5 Case Ground All others SM3030-6
- Surface Mount 3.0 x 3.0 mm Package
- Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units Input Power Level 18 dBm DC Voltage on any Non-ground Terminal 5 V Operating Temperature Range -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C
925 MHz
- No matching network required for operation at 50 . 2. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 and measured with 50 network analyzer. 3. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 4. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is depe ndent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 5. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototype s." 6. The design, manufacturing process, and specifications of this filter are subject to change. 7. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 8. US and international patents may apply. Pb CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: /G53 /G46 /G32 /G31 /G38 /G36 /G45 /G35 /G30 /G20 /G6F /G68 /G6D /G35 /G30 /G20 /G6F /G68 /G6D /G32 /G35 /G31 /G2C /G20 /G33 /G2C /G20 /G34 /G2C /G20 /G36
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2016 SF2412E 2/9/18 Page 2 of 4 www.murata.com Transfer Function Wideband
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2016 SF2412E 2/9/18 Page 3 of 4 www.murata.com SM3030-6 Case TOP VIEW BOTTOM VIEW A BC D J EF GH I YWWS /G4B /G4B /G4F /G4D /G4D /G4E /G4E /G4E /G4C 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Case Materials Dimension mm Inches Min Nom Max Min Nom Max Materials Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free PCB Footprint Top View
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2016 SF2412E 2/9/18 Page 4 of 4 www.murata.com Tape and Reel Specifications See Detail "A" 13.0 20.22.0 12.0 100 REF. "B" REF. COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W 12.0 mm RO.3 (MAX.) Ko SECTION A-A 0.3 ± 0.05 SECTION B-B Bo 2.0 4.0 Ao Pitch BB A R0.5 (MAX.) A 5.5 12.0 1.75 1.5 1.50PIN #1 USER DIRECTION OF FEED TBD YWWS 330 REF. TYP.