SF2380E MURATA1 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. February 2015 SF2380E (R) 4/26/17 Page 1 of 5 www.murata.com
Electrical Characteristics
Characteristic Sym Notes Min Typ Max Units Center Frequency fC 869.5 MHz Insertion Loss, 863 to 876 MHz IL 2.5 3.5 dB Amplitude Ripple, 863 to 876 MHz MHz 0.8 1.5 dBP-P VSWR, 863 to 876 MHz 1.6 2.0 Attenuation, Referenced to 0 dB dB 10 to 820 MHz 40 53 820 to 835 MHz 35 49 912 to 927 MHz 25 34 927 to 972 MHz 35 41 972 to 1300 MHz 40 55 Source Impedance ZS 50 Load Impedance ZL 50 Temperature Coefficient of Frequency -36 ppm/k Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator 6H, YWWS Standard Reel Quantity Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Connection Terminals Input 2 Output 5 Case Ground All others SM3030-6
- Low-loss RF SAW Filter
- Miniature 3 x 3 mm SWD Package
- Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units Input Power Level +10 dBm DC Voltage on any Non-ground Terminal 3 V Operable Temperature Range -45 to +125 °C Operating Temperature Range -30 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C Maximum Soldering Profile, 2 cycles/10 seconds minimum 260 °C
869.5 MHz
- Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 and measured with 50 network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is depe ndent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototype s." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: SF2380E
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. February 2015 SF2380E (R) 4/26/17 Page 2 of 5 www.murata.com Transfer Function
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. February 2015 SF2380E (R) 4/26/17 Page 3 of 5 www.murata.com S22 Reflection Functions S11
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. February 2015 SF2380E (R) 4/26/17 Page 4 of 5 www.murata.com SM3030-6 Case TOP VIEW BOTTOM VIEW A BC D J EF GH I YWWS /G4B /G4B /G4F /G4D /G4D /G4E /G4E /G4E /G4C 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Case Materials Dimension mm Inches Min Nom Max Min Nom Max K 3.20 0.126 L 1.70 0.067 M 1.05 0.041 N 0.81 0.032 O 0.38 0.015 Materials Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free PCB Footprint Top View
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. February 2015 SF2380E (R) 4/26/17 Page 5 of 5 www.murata.com Tape and Reel Specifications “B” Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13.0 20.22.0 12.0 100 REF. "B" REF. COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W 12.0 mm RO.3 (MAX.) Ko SECTION A-A 0.3 ± 0.05 SECTION B-B Bo 2.0 4.0 Ao Pitch BB A R0.5 (MAX.) A 5.5 12.0 1.75 1.5 1.50PIN #1 USER DIRECTION OF FEED 679 YWWS