SF2233E MURATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

www.RFM.com E-mail: info@rfm.com Page 1 of 5 ©2010 by RF Monolithics, Inc. SF2233E - 11/18/10

Electrical Characteristics

Characteristic Sym Notes Min Typ Max Units Center Frequency fC 1882.5 MHz Minimum Insertion Loss, 1850 to 1915 MHz ILMIN 1.2 2.5 dB Amplitude Ripple, 1850 to 1915 MHz 2.0 3.0 dBP-P Input/Output Return Loss, 1850 to 1915 MHz 6.0 6.5 dB Attenuation, Referenced to 0 dB: dB 800 to 1400 MHz 25 35 1480 to 1640 MHz 30 32 1930 to 1940 MHz 61 5 1940 to 1950 MHz 20 25 1972 to 2050 MHz 32 34 2110 to 2170 MHz 25 30 2300 to 2400 MHz 25 32 2400 to 3000 MHz 25 30 Source Impedance ZS 50 Ω Load Impedance ZL 50 Ω Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator 968, YWWS Standard Reel Quantity Reel Size 7 inch 500 Pieces/Reel Reel Size 13 inch 3000 Pieces/Reel Connection Terminals Input 2 Output 5 Case Ground All others SM3030-6

  • Low-loss RF SAW Filter  Miniature 3 x 3 mm SMD Package  Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units Input Power Level +12 dBm DC Voltage on any Non-grounded Terminal 3 V Operating Temperature Range -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C Maximum Soldering Profile, 5 cycles/10 seconds maximum 265 °C

1882.5 MHz

  1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is depen dent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. The design, manufacturing process, and specifications of this filter are subject to change. 5. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 6. US and international patents may apply. 7. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. Pb CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: /G35 /G30 /G20 /G6F /G68 /G6D /G35 /G30 /G20 /G6F /G68 /G6D /G35 /G32 /G31 /G2C /G20 /G33 /G2C /G20 /G34 /G2C /G20 /G36 /G53 /G41 /G57 /G20 /G46 /G69 /G6C /G74 /G65 /G72

www.RFM.com E-mail: info@rfm.com Page 2 of 5 ©2010 by RF Monolithics, SF2233E - 11/18/10 Filter Passband Response Filter Broadband Response 1882LCRM50-1850A -10 Freq.(MHz) Att.(dB) S21 spec. 1882LCRM50-1850A -50 -45 -40 -35 -30 -25 -20 -15 -10 Freq.(MHz) Att.(dB) S21 spec.

www.RFM.com E-mail: info@rfm.com Page 3 of 5 ©2010 by RF Monolithics, SF2233E - 11/18/10 Filter Return Loss Plots 1882LCRM50-1850A Freq .(MHz) VSWR S11 spec. 1882LCRM50-1850A Fre q.(MHz ) VSWR S22 s pec .

www.RFM.com E-mail: info@rfm.com Page 4 of 5 ©2010 by RF Monolithics, SF2233E - 11/18/10 SM3030-6 Case TOP VIEW BOTTOM VIEW A BC D J EF GH I /G4B /G4B /G4F /G4D /G4D /G4E /G4E /G4E /G4C 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Case Materials Dimension mm Inches Min Nom Max Min Nom Max K 3.20 0.126 L 1.70 0.067 M 1.05 0.041 N 0.81 0.032 O 0.38 0.015 Materials Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free PCB Footprint Top View 968 YWWS

www.RFM.com E-mail: info@rfm.com Page 5 of 5 ©2010 by RF Monolithics, SF2233E - 11/18/10 Tape and Reel Specifications “B” Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13.0 20.22.0 12.0 100 REF. "B" REF. COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W1 2 . 0 m m RO.3 (MAX.) Ko SECTION A-A 0.3 ± 0.05 SECTION B-B Bo 2.0 4.0 Ao Pitch BB A R0.5 (MAX.) A 5.5 12.0 1.75 1.5 1.50PIN #1 USER DIRECTION OF FEED